Claim Missing Document
Check
Articles

Found 14 Documents
Search

ANALISIS BEBAN KERJA DAN JUMLAH OPERATOR PENULANGAN RANGKA BETON UDIT Wahyuni, Dini; Sembiring, Meilita Tryana; Putra, Suryadi; Budiman, Irwan
CANTILEVER Vol 8, No 1 (2019): Cantilever
Publisher : Jurusan Teknik Sipil dan Perencanaan Fakultas Teknik Universitas Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (234.44 KB) | DOI: 10.35139/cantilever.v8i1.72

Abstract

This study was conducted at a factory producing construction and building materials such as ready mix concrete, piles, udit concrete, and ryol.  These products are produced in almost the same process, but on different production lines.  There are 2 operators in the frame reinforcement section for udit concrete production.  It is seen that the two operators have the same task but different results of their work, so that the production target is not achieved.  The workload analysis method is used to determine the operator's actual load.  Observation of activities is carried out by the work sampling method for 5 days.  In work sampling, work and idle activities of workers are observed at randomly selected times and the amount of production during observations is recorded.  From the study, it is known the ideal of actual load of each operator and the number of operators for the concrete frames reinforcement.  The results showed workload of operator 1 was 95.11% while workload of operator 2 was 107%.  The number of operators reinforcing concrete frames remains fixed for 2 people, but wage compensation needs to be given to operators 2 for excess workload refers to the amount of wages and provisions for overtime that are applicable in the company.
Implementasi Metode Lean Service dan 5S untuk Meningkatkan Efisiensi Waktu Pelayanan di Dinas Pencegah dan Pemadam Kebakaran Kota Medan Tarigan, Uni Pratama Pebrina; Budiman, Irwan
Jurnal Sistem Teknik Industri Vol. 23 No. 1 (2021): JSTI Volume 23 Number 1 January 2021
Publisher : TALENTA Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32734/jsti.v23i1.4891

Abstract

Fire is a threat to human safety. With the rapid development and progress of development, the risk of fire is increasing. The population is getting denser, the construction of office buildings, residential areas, and industries that are increasingly developing so that these areas have a level of vulnerability to the risk of fire. Therefore, the existence of the Fire Prevention and Fire Service is needed. The problem that often occurs is the length of time the Fire Prevention and Fire Department gets to the scene of the fire. This causes huge losses to the community both in funds and lives. This study’s purpose is to improve the efficiency of service time at the Fire Prevention and Department of the Fire so that losses due to fire can be minimized. The method used is Lean Service and for the design using the 5S method. The results of this paper that the value added activity amount 37%, while the non-value added activity amount 63%. These results indicate the need for a reduction in activity so that processing time is more efficient. The result of this analysis using Fishbone Diagram and FMEA, it was found that the most cause of the highest failure mode was activity in the storage area for equipment and personal protective equipment that was difficult to reach and irregular so that the best layout was designed using the 5S Method.
Mitigasi Risiko Downtime Mesin Crane dengan Reliability Centered Maintenance Marwan Buulolo; Wilson Wilson; Irwan Budiman
JOURNAL OF INDUSTRIAL AND MANUFACTURE ENGINEERING Vol 5, No 1 (2021): EDISI MEI
Publisher : Universitas Medan Area

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31289/jime.v5i1.3615

Abstract

PT. Apindowaja Ampuh Persada adalah salah satu perusahaan manufaktur yang bergerak dalam bidang industri manufacturing pembuatan spare part mesin dan mesin produksi kelapa sawit. Tentunya dalam hal ini membutuhkan peralatan bantuan untuk memudahkan sistem kerja pemindahan bahan baku dari satu tempat ke tempat lainnya dengan Mesin Crane (Hoist Crane). Dalam penelitian perlu ditentukan kegiatan perawatan hoist crane yang terjadwal guna meningkatkan keandalan kerja alat. Dalam penelitian ini digunakan metode Reliability Centered Maintenance untuk menentukan jadwal perawatan mesin dan alat, lalu sistem penyediaan sparepart kritikalnya menggunakan Business Process Modelling. Hasil yang diperoleh beberapa hal yang perlu diperhatikan setiap hari yaitu melakukan pengecekan atau kegiatan pemindahan sesuai dengan Standard Operating Procedure, dan melakukan pengecekan terhadap breaker. Terdapat 4 kesalahan yang mengalami kerusakan yang menimbulkan efek sehingga mesin crane tidak dapat digunakan yaitu terdapat pada nomor 9,14,17,19.
Identifikasi Penyebab Kerusakan dengan Pendekatan Failure Mode and Effect Analysis Josua fransiskus pangaribuan; Arun Persat; Irwan budiman; Grace aloina sitepu
JOURNAL OF INDUSTRIAL AND MANUFACTURE ENGINEERING Vol 4, No 2 (2020): EDISI NOVEMBER
Publisher : Universitas Medan Area

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31289/jime.v4i2.3610

Abstract

Peneltian ini dilakukan pada perusahaan Foundry yang berlokasi di Sumatera Utara, Indonesia. kerusakan yang sering terjadi di perusahaan tersebut  adalah mesin crane . dalam penelitian ini peneliti akan menganalisis kerusakan pada mesin crane dengan menggunakan Metode Failure Mode Effect Analisys (FMEA). Adapun langkah-langkah yang digunakan dalam penelitian ini yaitu, pemeriksaan, mendeteksi kegagalan, tingkat kerusakan, angka probabilitas, angka deteksi, angka risiko. setelah dianalisis didapatkan nilai Risk Priority Number (RPN) Disk brake tidak dapat melakukan pengereman saat motor berjalan (RPN = 294) dan hoist tambahan kondisi tidak aman, coil rusak dan tong yang rusak saat mengangkat coil sehingga jatuh karena posis tidak seimbang (RPN = 98)  . hasil penelitian yaitu didapatkan pada nilai RPN tertinggi pada faktor kerusakan disck brake dan hoist tambahan.
PEMETAAN KONDISI INTERNAL DAN EKSTERNAL UMKM TRANSPORTASI DENGAN MENGGUNAKAN ANALISIS SWOT DI SUMATERA UTARA ARDIAN HIRAMAN AROTAMA; IRWAN BUDIMAN
JAKPI - Jurnal Akuntansi, Keuangan & Perpajakan Indonesia Vol 8, No 2 (2020): Jurnal Akuntansi, Keuangan & Perpajakan Indonesia (JAKPI)
Publisher : Universitas Negeri Medan (UNIMED)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24114/jakpi.v8i2.20737

Abstract

Abstrak: Penelitian ini memfokuskan pada perusahaan jasa yang sedang mengalami penurunan jumlah penumpang pada wilayah Medan, Bandara Kualanamu Internasional, Siantar, Parapat, Sibolga, dan daerah Singkil. UMKM  juga mengalami permasalahan  yang diakibatkan beberapa factor yaitu: kekurangan armada, cara memasarkan kepada konsumen kurang, dan keterlambatan penjemputan konsumen. Penelitian ini bertujuan untuk mengetahui posisi perusahaan dalam Matriks IFAS dan EFAS serta program kerja prioritas. Metode yang dipakai dalam penelitian ini adalah analisis  SWOT adalah metode perencanaan strategis yang digunakan untuk mengevaluasi kekuatan (strengths), kelemahan (weaknesses), peluang (opportunities), dan acaman (threats) dalam suatu proyek atau spekulasi bisnis. Hasil analisis SWOT menunjukkan bahwa perhitungan Matriks IFAS dan EFAS diperoleh hasil IFAS lebih tinggi daripada EFAS dan skor tertinggi terdapat pada Strengths sebesar 2,0667.Kata kunci : Strategi, SWOT Analysis, Balanced Scorecard, QSPM    
Improvement Of Production Quality With Improved Scheduling Of PT Jaya Baru Mandiri With Hodgson Algorithm Method Vera Wati; David; Irwan Budiman

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v8i1.2499

Abstract

Jaya Baru Mandiri company is a manufacturing company engaged in the manufacture of machinery spare parts. One of the spare parts products that are often made is mainshaft, for the purposes of palm oil mills. In the process of making mainshaft, there is still often a delay (lateness). So that in this study, it was done to improve the scheduling of the production process in order to deliver the product to consumers in a timely manner. To clarify the production process, the method that will be used in this study is hodgson algorithm method, shortest processing time (SPT). Hodgson's algorithmic method serves to minimize the number of tardy jobs in the scheduling of production machines. The purpose of hodgson's algorithm scheduling is to improve the efficiency of scheduling the ideal production process as well as minimize unnecessary waste of time with the improvements recommended in this study. It is expected that the production process of PT. Jaya Baru Mandiri can improve its production process effectively and efficiently.
Developing Standard Operating Procedure for Production in North Sumatra Construction Companies Atita Arumbasari; Poetri Rhamadani; Anita Christine Sembiring; Irwan Budiman

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v8i2.2524

Abstract

In the industrial era 4.0, the competition between corporate companies is getting tighter. This is a reference for the company's productivity in operating a product or service, one of which is PT.X. It can be seen from the running performance process, PT. X has constraints on the production performance process. Therefore, PT.X seeks to increase productivity in the production process. So that in this study, a proposal design was carried out on a standard operating procedure (SOP) using the Business Process Model (BPM) method. The result of the proposed design with BPM is to minimize the production time by 2 hours 40 minutes so that the production process can run more effectively and efficiently. With that, the best solution in handling this case research provides suggestions on the work process that is running with efficient improvements.
Reducing Fire Response Time in Medan City by Determining Hydrant Points Using ArcGis Software and Optimizing Routes Using the Djisktra Algorithm Putri Stepvani; Yosefin Saragi; Irwan Budiman

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v8i2.2534

Abstract

The development of an area will increase the risk of fire. Fire will not only cause physical, material loss, it can also cause casualties. In a span of 3 years, 46 major fire cases were recorded, not including unregistered fire cases. To be able to reduce the losses incurred, the fire fighters must be able to meet the fire response time of 15 minutes. To be able to meet this response time, a water source that can be used to douse the fire is needed as well as the fastest route to get to the destination point in the shortest possible time. The method used for laying the hydrant is the distribution method using Arc Gis software. The results obtained are that it takes 26 hydrant locations that are scattered in several central business areas and densely populated in the 3 sub-districts.
Replanning Strategis Plan for Marketing Product with SWOT Analysis, QSPM, Marketing Mix 4P and KPI Methods During the COVID-19 Pandemic James Luis Hartono; Irwan Budiman; Anita Christine Sembiring

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v8i2.2535

Abstract

UKM Prime Store operates as a retail store that sells various oils by taking oil from authorized oil distributors, distributing it to various motorbike repair shops and to as many agents as possible so that it reaches consumers. The strategic plan needs to be used due to the decline in market demand by 20% in 2019, where in 2018 2000 boxes were sold per month, but in 2019 only 1600 boxes were sold per month, in 2020 there was an increase of 10% at the beginning of the year to 1700- 1800 in January - June 2020, then decreased again until the end of 2020. The purpose of this research is to increase sales volume by utilizing technological advances, increasing sales through brochures and promotions. The methods used are the SWOT method, QSPM and the 4P method. From the strategic results obtained 6 strategies that can be used from QSPM data processing, it is hoped that UKM can increase sales by taking advantage of technological advances, and increase sales through brochures and promotions made by UKM. This research is expected to help companies and UKM affected by the pandemic to get up and increase the sales of their products again.
Analysis of Pandemic Bussnines Strategy Development at PT Milala Wisata Tour and Travel Andreas Panjaitan; Andes Stefen Sembiring; Anita Christine Sembiring; Irwan Budiman

Publisher : Department of Industrial Engineering - Universitas Yudharta Pasuruan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35891/jkie.v8i2.2536

Abstract

The research is the qualitative and quantitative results using SWOT, STP, Marketing mix 7P, and cashflow for 3 years method analysis. This research aims to develop the business of PT Milala Wisata Tour & Travel during Covid-19 pandemic by using a typical culinary side business so that the main business can survive. SWOT analysis is a way to systematically identify various factors in order to formulate company strategy. The data collection technique carried out by the researcher is by direct observation conducted at the company and conducting interviews with the owner of PT. Milala Wisata Tour & Travel. Also by adding from reading books and also other sources related to the research title. The 7P Marketing mix includes price, product, process, people, physical evidance, promotion, place. To find out the strengths, weaknesses, and feasibility of typical culinary side businesses, an analysis is first carried out to find out how the target market is The data obtained from the collection and then analyzed using the Internal Rate of Return & Cashflow for 3 years to see the feasibility level of typical culinary side businesses are suitable and able to support the main business of the The results of research from Cashflow for 3 years show that a typical culinary side business deserves to be realized as a support for main business during the Covid-19 pandemic. Typical culinary side businesses have strengths and are in line with the travel business so they can take advantage of existing opportunities.