Garuda - Garba Rujukan Digital

All

Jurnal INTECH Teknik Industri Universitas Serang Raya

INTECH
Website

Published by Universitas Serang Raya

ISSN : 2407781X EISSN : 26552655 DOI : -

Decision Sciences, Operations Research & Management Engineering Industrial & Manufacturing Engineering Mechanical Engineering Transportation

Jurnal INTECH Teknik Industri Universitas Serang Raya, dengan nomor terdaftar ISSN 2407-781X (Print) dan 2655-2655 (online) adalah jurnal ilmiah yang diterbitkan oleh Program Sudi Teknik Industri, Fakultas Teknik, Universitas Serang Raya. Jurnal ini bertujuan untuk mempublikasikan hasil penelitian di bidang Teknik Industri yang diterbitkan dua kali setahun. Ruang lingkup Ilmu mencakup Riset Operasi, Sistem Manufaktur, Manajemen Industri, Ergonomi dan Sistem Kerja, Logistik dan Manajemen Rantai Pasokan, dan studi ilmiah lainnya sesuai dengan bidang lingkup penelitian Teknik Industri.

Arjuna Subject : -

Articles 7 Documents

Search results for , issue "Vol. 3 No. 2 (2017)" : 7 Documents clear

Analisis Postur Kerja Operator dengan Metode Rula di Area Gas Cutting Pegiardi, irwan; Handika, Firdanis Setyaning; Supriyadi, Supriyadi
Jurnal INTECH Teknik Industri Universitas Serang Raya Vol. 3 No. 2 (2017)
Publisher : Universitas Serang Raya

The gas cutting area has several jobs that are risky to the operator, such as activities with squatting, bending positions. This study aims to determine the risk of work in the gas cutting area as a basis for improving work posture. The method used is RULA (Rapid Upper Limb Assessment) is a research method for investigating disorders of the upper limbs. By measuring the group A score and group B score. Based on the results of the RULA value in the process of operating the machine with a sitting position with a score 3. clearing the cutting plate with a bent position with a score of 5, and the highest score 6 in the grinding plate cutting. To reduce pain in the neck, torso, and arms, operators should not do work postures that cause pain in the body for a long time.

Usulan Penurunan Tingkat Kecacatan Produk Pelat Baja dengan Metode Six Sigma Muhamad Bob Anthony
Jurnal INTECH Teknik Industri Universitas Serang Raya Vol. 3 No. 2 (2017)
Publisher : Universitas Serang Raya

This study aims to maximize the decline in the level of product defects to lead to zero defects. Researchers use the six sigma method through 5 stages of completion, namely, define, measure, analyze, improve, and control. Based on the results of the study it can be concluded that the sigma level and the value of DPMO (Defect per Million Opportunities) of the company amounted to 3.47 with possible damage of 24,239 sheets for one million productions. After further analysis using the Pareto diagram, it found that the cutting fault transfer defect was the most common with a percentage of damage of 43%. And based on the results of the analysis of fishbone diagrams, it can be seen that the main factors causing contamination in the production process come from the worker factor (human), followed by machine factors, material, and work methods. The proposed improvements that can be made by the company include updating existing methods and SOPs (standard operating procedures) and monitoring the operator's performance and developing knowledge and planning proper maintenance scheduling.

Analisa Perawatan Mesin Pulper Menggunakan Metode Overall Equipment Effectiveness (OEE) Ade Mukhlis Shoutul Ahlaq; Dadi Cahyadi; Firdanis Setyaning Handika
Jurnal INTECH Teknik Industri Universitas Serang Raya Vol. 3 No. 2 (2017)
Publisher : Universitas Serang Raya

This study aims to determine the effectiveness of Pulper machines. The research was conducted using the Overall Equipment Effectiveness method. The research conducted at a company engaged in the Pulp & Paper field. Data collected by interviews and conducting direct observations in the area during February 2017. Based on the research, it can conclude that the Pulley OEE value was obtained by 77.31% with the main factor causing damage was Broken Ragger by 46%. The proposed improvements that can be given to minimize the incidence of broken ragger are training of ragger machine operators regularly, planning maintenance of scheduled ragger machines as well as providing tools to make it easier for operators to repair damaged machines

Analisa Kinerja Mesin Roughing Stand dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) dan Failure Mode Effect Analysis (FMEA) Hasrul Hasrul; M. Jihan Shofa; Heru Winarno
Jurnal INTECH Teknik Industri Universitas Serang Raya Vol. 3 No. 2 (2017)
Publisher : Universitas Serang Raya

The roughing stand machine functions for steel/product formation and the roll has five stands, and from each position has a different turn. In the production process, this machine also experiences obstacles that hinder the process [of production]. This study aims to determine the value of Overall Equipment Effectiveness (OEE) and analysis of the causes of OEE values have not been maximized based on the review of Failure Mode and Effect Analysis (FMEA). The data used are historical data of roughing stand machines during July 2016-December 2016. Based on the data processing performed, the results of the Overall Equipment Effectiveness (OEE) obtained on the Roughing Stand machine purchased at 57.5. The potential failure priority is base on the order of Risk Priority Number (RPN), the screw up non-working item has the most considerable RPN value (56). Regular lubrication is one way to maximize screw up performance..

Analisis Penjualan Baju Seragam Sekolah di Konveksi Hanifah Collection Ahmad Fazarudin; Ahmad Nalhadi; Gerry Anugrah Dwiputra
Jurnal INTECH Teknik Industri Universitas Serang Raya Vol. 3 No. 2 (2017)
Publisher : Universitas Serang Raya

Hanifah Collection is a company engaged in the convection of school uniforms. The fluctuating number of requests each month creates its problems in determining the amount of production. This study aims to find a method that matches the data pattern as the basis for determining the amount of output in the next period. The technique used in this study is the forecasting method of Moving Average, Exponential Smoothing and Triple Exponential Smoothing with parameter level errors of each way using MAD, MSE, and MAPE. From the results of this study, there is a moving average method with the most appropriate method in determining demand forecasting in the next period with a value of MAD of 172.22, MSE of 46624.34 and MAPE 46624.34.

Analisis Postur Kerja Operator dengan Metode Rula di Area Gas Cutting irwan Pegiardi; Firdanis Setyaning Handika; Supriyadi Supriyadi
Jurnal INTECH Teknik Industri Universitas Serang Raya Vol. 3 No. 2 (2017)
Publisher : Universitas Serang Raya

Analisis Pengurangan Cooling Water Loss Menggunakan Six Sigma dan Failure Mode Effect Analysis (FMEA) Ikhsan Wicaksono; Tri Joko Wibowo; M. Jihan Shofa
Jurnal INTECH Teknik Industri Universitas Serang Raya Vol. 3 No. 2 (2017)
Publisher : Universitas Serang Raya

Loss on a working system is one of the causes of the cost of the process to swell. The loss that reaches more than 450 tons/month on a cooling water system at a chemical company in the Serang area causes the company's expenses to swell. This study aims to determine the cause of cooling water wash as a basis for process improvement by using Six Sigma and Failure Mode Effect Analysis (FMEA). Data analysis results showed that cooling water loss is too little backwash filter duration, service filter duration is not optimum, and flow unreadable side stream. Improvements by increasing the length of the backwash, raising the service time of the sand filter to every two days, and cleaning the rotameter can increase the sigma value from 3.5 to 4.5.

Page 1 of 1 | Total Record : 7

Filter by Year

2017 2017

Filter By Issues

All Issue Vol. 11 No. 1 (2025): Juni Vol. 10 No. 2 (2024): Desember Vol. 10 No. 1 (2024): Juni Vol. 9 No. 2 (2023): Desember Vol. 9 No. 1 (2023): Juni Vol. 8 No. 2 (2022): Desember Vol. 8 No. 1 (2022): Juni Vol. 7 No. 2 (2021) Vol. 7 No. 1 (2021) Vol. 6 No. 2 (2020) Vol. 6 No. 1 (2020) Vol. 5 No. 2 (2019) Vol 5, No 2 (2019) Vol 5, No 1 (2019) Vol. 5 No. 1 (2019) Vol. 4 No. 2 (2018) Vol. 4 No. 1 (2018) Vol 4, No 1 (2018) Vol. 3 No. 2 (2017) Vol 3, No 2 (2017) Vol 3, No 1 (2017) Vol. 3 No. 1 (2017) Vol 2, No 2 (2016) Vol. 2 No. 2 (2016) Vol. 2 No. 1 (2016) Vol 2, No 1 (2016) Vol 1, No 1 (2015) Vol. 1 No. 1 (2015) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Supriyadi

Contact Email
jurnalindustriunsera@gmail.com

Phone
-

Journal Mail Official
jurnalindustriunsera@gmail.com

Editorial Address
-

Location
Kota serang,

Banten

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Supriyadi

Contact Email jurnalindustriunsera@gmail.com

Phone -

Journal Mail Official jurnalindustriunsera@gmail.com

Editorial Address -

Location Kota serang, Banten INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Supriyadi

Contact Email
jurnalindustriunsera@gmail.com

Phone
-

Journal Mail Official
jurnalindustriunsera@gmail.com

Editorial Address
-

Location
Kota serang,

Banten

INDONESIA