cover
Article Per Year (5 Year)
All
Home Page
OAI Link
Editorial Team
Contact
Reviewer
Google Scholar
Contact Name
A. Grummy Wailanduw
Contact Email
grummywailanduw@unesa.ac.id
Phone
+6285730235172
Journal Mail Official
jurnalotopro@unesa.ac.id
Editorial Address
Jurusan Teknik Mesin Fakultas Teknik Universitas Negeri Surabaya Gedung A6 Kampus UNESA Ketintang Surabaya 60231 Telp. (031) 8299487, Fax. (031) 8292957
Location
Kota surabaya,
Jawa timur
INDONESIA
Otopro
Published by Universitas Negeri Surabaya
ISSN : 1858411X     EISSN : 26857863     DOI : http://dx.doi.org/1026740/otopro
Core Subject : Science, Engineering,
Automotive Engineering Energy Industrial & Manufacturing Engineering Materials Science & Nanotechnology Mechanical Engineering
Jurnal Otopro diterbitkan 2 (dua) kali setahun yaitu bulan Mei dan November oleh Jurusan Teknik Mesin, FT-UNESA, sebagai media informasi dan forum kajian masalah ilmu Teknik Mesin. Berisi tentang tulisan ilmiah, ringkasan hasil penelitian, pembahasan kepustakaan dan gagasan kritis yang orisinil. Redaksi mengundang para ahli, praktisi, dan siapa saja yang berminat untuk menyumbangkan tulisan yang belum pernah diterbitkan dalam media cetak lain, tema tulisan meliputi: Permesinan, Konversi Energi, Material dan Metalurgi, Manufaktur, Rancang Bangun Mesin
Arjuna Subject : Teknik (semua kategori) - Teknik Mesin
Articles 6 Documents
 1 
Search results for , issue "vol 21 no 2 may 2026" : 6 Documents clear
ANALYSIS AND MONITORING OF FILLING TOOLS AUTOMATIC TIRE AIR CONTROL THROUGH IOT Abimanyu Mahardika Putra Kalimantono; Hartono, Moh; Rohman, Fatkhur; Zainuri, Ach Muhib
Otopro Vol 21 No 2 May 2026
Publisher : Universitas Negeri Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26740/otopro.v21n2.p43-48

Abstract

Maintaining proper tire pressure is essential for ensuring vehicle safety, fuel efficiency, and tire durability. However, manual tire inflation often results in inconsistent pressure and human error. This study aims to design and evaluate an IoT-based automatic tire inflation system. The system integrates a compressor, an MPX5700AP pressure sensor, a solenoid valve, a microcontroller, and a mobile application for real-time monitoring and control. Experimental results show a strong linear relationship between pressure and inflation time, with high consistency and minimal deviation. Although the automatic system requires slightly longer inflation time, it provides better accuracy and reliability. The proposed system offers a practical solution for small workshops and self-service applications
EXPERIMENTAL STUDY ON OTTO ENGINE PERFORMANCE WITH VARIATIONS IN COMPRESSION RATIO AND GASOLINE OCTANE Rahmat, Bahtiar; Prabowo, Irwan Setyo; Wirawan, Yuris Bahadur; Bahtiar, Fahmy Zuhda
Otopro Vol 21 No 2 May 2026
Publisher : Universitas Negeri Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26740/otopro.v21n2.p66-74

Abstract

This research aims to analyze the effect of compression ratio variation and gasoline octane number on the performance of spark-ignition internal combustion engines. The experimental object was a single-cylinder 124 cc motorcycle engine with an original compression ratio of 9.6:1. The compression ratio was increased to 10.6:1 by reducing the cylinder height by 0.6 mm. Performance testing was carried out using a dynamometer with two types of fuel, RON 88 and RON 92. Octane number 92 was selected based on fuel availability, while octane number 88 was used to evaluate engine performance under an increased compression ratio. A cylinder wall length reduction of 0.6 mm was applied as the maximum allowable limit, beyond which cylinder head modification would be required. The performance parameters evaluated were torque and brake power over an engine speed range of 4000–7000 rpm. The results indicate that increasing the compression ratio from 9.6:1 to 10.6:1 improved engine torque and brake power by approximately 3.8% to 4%. Meanwhile, the use of higher-octane gasoline (RON 92) increased performance by only about 2% to 2.4%, and only when used in the higher compression engine. In contrast, using high-octane fuel in a low-compression engine resulted in reduced performance due to ignition delay. Overall, the optimal performance was achieved when a high compression ratio was paired with high-octane fuel. Therefore, selecting an appropriate octane rating according to the engine compression ratio is essential to achieve optimal combustion efficiency, brake power output, and torque response.
SIMULATION OF FATIGUE AND DEFORMATION OF CARBON FIBER DRONE PROPELLERS USING THE FINITE ELEMENT METHOD (FEM) Arif, Syaiful
Otopro Vol 21 No 2 May 2026
Publisher : Universitas Negeri Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26740/otopro.v21n2.p57-65

Abstract

This study analyses finite elements in the structural calculation of a drone propeller in carbon fiber with loads that represent live use. The output of this study evaluates the effect of load variations on deformation, stress distribution, and safety factors as key indicators of structural performance. A three-dimensional propeller model is developed based on the actual geometric configuration and analysed using the Finite Element Method (FEM). Several loadings are considered: a base load with a total mass of 3.6 kg, and two additional loading conditions with increasing masses of 0.5kg and 0.75kg. The applied loads are converted into equivalent forces distributed along the propeller blades to simulate realistic operating conditions. Simulations show that increasing the applied load causes a proportional increase in the maximum deformation and a significant reduction in the minimum safety factor. The maximum deformation increases from 14.933mm at the base load to 18.044mm at the highest load. The blade tip is consistently identified as a critical region, where the highest deformation and stress concentration occur due to bending-dominated behaviour. The safety factor ranges from 0.51341 to 0.42489 as the load increases, indicating a decrease in structural safety. Fatigue loading is mentioned, this study addresses fatigue qualitatively based on stress concentration and safety factor trends, as explicit S–N curve data, load cycle definitions, and mean stress corrections are not included. The results emphasize the importance of structural optimization and accurate material modelling to improve the reliability and durability of carbon fiber drone propellers under various load conditions.
DESIGN OF A LIFTER FOR HORIZONTAL CHAMBER MACHINE IN A LEAF SPRING PRODUCTION LINE: A CASE STUDY AT PT. XYZ Saepuddin, Ahmad; Rachman Arya Syahputra
Otopro Vol 21 No 2 May 2026
Publisher : Universitas Negeri Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26740/otopro.v21n2.p75-83

Abstract

PT. XYZ is an automotive manufacturing company that produces leaf springs. One of the machines used in the leaf spring forming process is a Horizontal Chamber Machine that works by pressing. In its operation, this machine requires a lifter to assist in the transfer of leaf springs and reduce the risk of workplace accidents. The lifter has a frame component that functions as the main structure in supporting the load during the lifting and lowering of the leaf spring. Therefore, it is necessary to design a lifter frame that is safe and capable of withstanding the working load that occurs during the production process. This study aims to design and evaluate the strength of the lifter frame to ensure its safety in operational use. There are three variations of frame designs differentiated by material thickness, namely 10 mm, 12 mm, and 14 mm. The simulation results show that the maximum stress in frame design 1 is 24 MPa, frame design 2 is 16 MPa, and frame design 3 is 12 MPa. The strain values for each design are 0.000066, 0.000048, and 0.000036, while the displacement maximum values are 0.026 mm, 0.016 mm, and 0.016 mm. The safety factors obtained are 11, 15, and 19, respectively. The fatigue life value for all frame designs is  cycles. Based on these simulation results, frame design 1 is declared to have met the strength and safety criteria required for use in the production process
EFFECT OF SECTION THICKNESS ON NODULAR GRAPHITE FORMATION AND MECHANICAL PROPERTIES OF DUCTILE CAST IRON Moch Chamim; Edi Sarwono; Haikal; Margono
Otopro Vol 21 No 2 May 2026
Publisher : Universitas Negeri Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26740/otopro.v21n2.p49-56

Abstract

This study investigates the effect of section thickness on the microstructure and mechanical response of Ductile Cast Iron (DCI) using specimens with thicknesses of specimen 20, 40, and 60 mm. Optical microscopy reveals a ferrite-pearlite matrix with spherical graphite, where the graphite nodules exhibit a tendency toward larger size and greater heterogeneity with increasing section thickness. The measured nodule diameters are approximately 17-20 µm (20 mm), 21-22 µm (40 mm), and 15-26 µm (60 mm), indicating thickness-driven changes in solidification/cooling conditions that promote graphite hardening in thicker sections. Mechanical testing shows a consistent decrease in hardness with increasing thickness: 246.8 VHN (specimen 20 mm), 226.75 VHN (specimen 40 mm), and 204.8 VHN (specimen 60 mm). Impact test results show a non-monotonic trend, increasing from 0.02 (specimen 20 mm) to 0.049 (specimen 40 mm) and slightly decreasing to 0.045 (specimen 60 mm). The highest impact value at specimen 40 mm indicates an optimal balance between matrix hardness and toughness at intermediate thicknesses, while the slight decrease at specimen 60 mm despite the lower hardness may be related to increased graphite size heterogeneity and microstructural nonuniformity in thicker sections. Overall, thickness significantly affects graphite morphology and the hardness toughness trade off in DCI, with 40 mm sections providing the most favorable toughness in this data set.
EVALUATION OF INJECTION MOLDING PROCESS PARAMETERS ON THE QUALITY OF BRAKE FLUID RESERVOIR CAP PRODUCTS USING MOLDFLOW SIMULATION Shalihah, Adinda Rahmah; Subarkah, Aditya Bagja; Novyansyah, Farras; Fadillah, Irfan; Muhadzab, Ammar Fathi; Alfath, Hafizh Maulana; Azis, Ulima Adristi; Nurhadi, Hikari Qurrata’ain
Otopro Vol 21 No 2 May 2026
Publisher : Universitas Negeri Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26740/otopro.v21n2.p84-90

Abstract

This study aims to analyze the effect of melt temperature and mold surface temperature variations on the quality of the motorcycle brake fluid reservoir cap using Autodesk Fusion simulation. Three parameter variations were applied: 260°C/80°C, 220°C/50°C, and 180°C/20°C, while other process parameters were kept constant. The evaluation focused on fill confidence, weld lines, sink marks, and warpage. The results show that all conditions achieved 100% fill confidence with a filling time of 0.53 seconds. However, higher temperatures reduced weld lines but increased sink marks and warpage. Conversely, lower temperatures minimized deformation but increased the number of visual defects. The medium temperature condition provided the best balance between visual quality and dimensional stability. Therefore, the 220°C/50°C condition is recommended as optimal

Page 1 of 1 | Total Record : 6

 1 

Filter by Year

2026 2026


Reset
Filter By Issues
All Issue Vol 21 No 2 May 2026 Vol 21 No 1 Nov 2025 Vol 20 No 2 Mei 2025 Vol 20 No 1 Nov 2024 Vol 19 No 2 Mei 2024 Vol 19 No 1 Nov 2023 Vol 18 No 2 Mei 2023 Vol 18 No 1 Nov 2022 Vol 17 No 2 Mei 2022 Vol 17 No 1 Nov 2021 Vol 16, No 2 (2021) Vol 16 No 2 Mei 2021 Vol 16, No 1 (2020) Vol 16 No 1 Nov 2020 Vol 15 No 2 Mei 2020 Vol 15, No 2 (2020) Vol 15, No 1 (2019) Vol 15 No 1 Nov 2019 Vol 14, No 2 (2019) Vol 14 No 2 Mei 2019 vol 14 No 1 Nov 2018 Vol 13 No 2 Mei 2018 Vol 13 No 1 Nov 2017 Vol 12 No 2 Mei 2017 Vol 14, No 1 (2018) Vol 13, No 2 (2018) Vol 13, No 1 (2017) Vol 12, No 2 (2017) More Issue