cover
Contact Name
Astri Rinanti
Contact Email
astririnanti@trisakti.ac.id
Phone
+6221-5663232
Journal Mail Official
urbanenvirotech@trisakti.ac.id
Editorial Address
Department of Environmental Engineering Faculty of Landscape Architecture and Environmental Technology Universitas Trisakti, Jakarta Gedung K, Kampus A Jl. Kyai Tapa Grogol Jakarta 11440, Indonesia
Location
Kota adm. jakarta barat,
Dki jakarta
INDONESIA
INDONESIAN JOURNAL OF URBAN AND ENVIRONMENTAL TECHNOLOGY
Published by Universitas Trisakti
ISSN : 25799150     EISSN : 25799207     DOI : https://dx.doi.org/10.25105
The scope of the journal emphasis not limited to urban environmental management and environmental technology for case study in Indonesia and for other region in the world as well. Urban Environmental Management: environmental modeling, cleaner production, waste minimization and management, energy management and policies, water resources management, water supply and sanitation, industrial safety and health, water recovery and management, urban environmental pollution-diseases and health status, eco-drainage, flood risk management, risk mitigation, climate change and water resource adaptation. Environmental Technology: energy efficiency, renewable energy technologies (bio-energy), environmental biotechnology, pollution control technologies (wastewater treatment and technology), water treatment and technology, indigenous technology for climate change mitigation and adaptation, solid waste treatment and technology
Articles 7 Documents
Search results for , issue "VOLUME 7, NUMBER 2, OCTOBER 2024" : 7 Documents clear
COMMUNITY DEVELOPMENT STRATEGY THROUGH IDENTIFICATION OF TANGIBLE AND INTANGIBLE ASSETS FOR THE DEVELOPMENT OF BARAN BURING TOURISM KAMPUNG Titisari, Ema Yunita; Wahid, Julaihi; Asikin, Damayanti; Herlindah, Herlindah; Dewi, Heptari Elita
INDONESIAN JOURNAL OF URBAN AND ENVIRONMENTAL TECHNOLOGY VOLUME 7, NUMBER 2, OCTOBER 2024
Publisher : Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/urbanenvirotech.v7i2.18067

Abstract

Suburban areas often experience development pressures, with implications for changing green space into built areas, rural cultures into urban ones, and poverty into prosperity. The development of Buring Kampong (suburban settlement) in Malang City into a tourism kampong, in addition to improving the local economy, must also be able to support environmental quality and community independence. This research used the Asset Based Community Development (ABCD) approach in identifying tangible and intangible assets. The data were collected through field observation, focused group discussion, interviews, and secondary data. Tangible aspects include land use, natural and artificial resources, infrastructure, accessibility, machinery and equipment, and local architecture. Meanwhile, intangible assets include intellectual property, potential branding development, goodwill, software/web, formal and informal organization, social and cultural values, and potential customers. The data obtained were presented descriptively and discussed together, as a triangulation process. The results showed the diversity and breadth of tangible and intangible assets of Baran village, and both of these assets can be directly found in the field and during FGDs and interviews. This research is also an effort to strengthen community engagement and public awareness about their assets, and this activity needs to be continuously improved, to have a better level of community engagement, confidence, social participation, branding, and networking.
FLOOD SUSCEPTIBILITY MAPPING USING MACHINE LEARNING IN KENING RIVER, SUB WATERSHED OF BENGAWAN SOLO, TUBAN Mustikaningrum, Dhina; Widya, Liadira Kusuma; Ulfah, Umayya; Wijayanti, Regita Faridatunisa
INDONESIAN JOURNAL OF URBAN AND ENVIRONMENTAL TECHNOLOGY VOLUME 7, NUMBER 2, OCTOBER 2024
Publisher : Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/urbanenvirotech.v7i2.18818

Abstract

Floods are natural occurrences with the potential to cause damage to ecosystems and pose significant threats to human life, resulting in the destruction of property, infrastructure, and socioeconomic challenges. In recent times, flooding in the Sub-Watershed of Bengawan Solo has been linked to the overflowing Kening River in Tuban County. Aim: This study aims to produce a flood susceptibility map to mitigate the frequency of flood occurrences as well as facilitate effective planning for flood disaster risk management. Methodology and results: Flood data is collected from 2016 to 2023 through field surveys, Sentinel-1 satellite imagery, and data from the Development Planning Agency, Tuban County. Integrating remote sensing data from satellite imagery (PlanetScope, Sentinel-2), geographic information systems (GIS), and spatial modeling techniques, a flood susceptibility map is developed for the Kening River catchment. The occurrence of floods in the Kening River area is associated with various factors (11 variables) assessed through the frequency ratio approach, including profil curvature, LS factor, aspect, rainfall, river distance, road distance, building density 100 m, road density 100 m, vegetation type, normalized difference water index (NDWI), and soil adjusted vegetation index (SAVI). The results show flood susceptibility maps utilizing frequency ratio (FR) and convolutional neural network (CNN) techniques. The flood susceptibility map obtained through the CNN method demonstrates a notably high AUC value. The model development generated a validation AUC value of 0.857 for training and 0.856 for testing. Conclusion, significance and impact study: This research provides an understanding into the factors that influence the occurrence of floods in the Kening River catchment area. It also emphasizes the benefit of advanced machine learning approaches in mapping the susceptibility of floods. Furthermore, this study has the potential to be helpful in guiding regional policy decisions and result in enhanced flood risk management measures in Tuban County.
POLICY FORMULATION FOR ANTICIPATING THE IMPACT OF ACID RAIN ON PADDY PLANTS USING NORMATIVE JURIDICAL ANALYSIS Ramadhan, Ardiansyah; Jumhur, Helni Murtiarsih; Nur, Fathan Ananta
INDONESIAN JOURNAL OF URBAN AND ENVIRONMENTAL TECHNOLOGY VOLUME 7, NUMBER 2, OCTOBER 2024
Publisher : Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/urbanenvirotech.v7i2.19451

Abstract

Law Number 32 of 2009 Article 57, paragraph 4C that one of the preservations of atmosphere functions regulate efforts to protect against acid rain. One of the effects of acid rain is soil damage to plants, such as what happened to paddy plants. In Indonesia, paddy is one of the priority food sources, but every year, it decreases in several regions. Aims: This study aimed at acid rain's anticipated impact on paddy plants in this case study Bandung Regency. Methodology and results: The approach method in this study is a normative juridical approach, using primary data sources obtained through interviews and journal literature. Then, secondary data from legal literature were analyzed descriptively and qualitatively. The study results show that the Bandung Regency Environmental Service has enforced the law. However, violations still occur by industry and society through vehicle emissions, coupled with the increase in population. One of the efforts to formulate policies to anticipate acid rain in paddy plants is to establish sanctions for violators who still pollute the environment, apply catalytic converters to vehicle exhausts that have the potential to remove NOx, carry out measurements at groundwater measurement stations, water quality information systems (manual or real-time). In addition, the irrigation policy for river water flowing on agricultural land with existing laws is being improved. Conclusion, significance, and impact study: Anticipating the impact of acid rain on rice requires various approaches, both technical and non-technical, as well as further analysis from various policy sectors.
IMPLEMENTATION OF TRANSIT ORIENTED DEVELOPMENT (TOD) IN THE JAKARTA SUB-URBAN AREA Taki, Herika Muhamad; Anita Sitawati Wartaman; Marselinus Nirwan Luru; Hanny Wahidin Wiranegara; Apri Zulmi Hardi
INDONESIAN JOURNAL OF URBAN AND ENVIRONMENTAL TECHNOLOGY VOLUME 7, NUMBER 2, OCTOBER 2024
Publisher : Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/urbanenvirotech.v7i2.20169

Abstract

The high mobility of sub-urban communities has become the focus of the government to create an effective transportation system by creating a Transit-Oriented Development concept at several stations in sub-urban or supporting cities of DKI Jakarta. Aims: The purpose of this research is to find out whether the Bekasi and Plawad stations which are located in the suburbs are effective for making transit oriented development. Methodology and results: The type of research to be carried out is quantitative and qualitative research, in which the variables in this study will cover the area, the distance between points, the number of trips from each region to the types of transportation modes used by the community. Then, these variables will be analyzed spatially using maps created in the ArcGIS application and compared to be given a score (scoring) in accordance with the provisions of the indicators of the variables that have been determined in this study. Conclusion, significance and impact study: Plawad and Bekasi Stations are considered not feasible to be used as TOD due to inadequate facilities, the train itself is not yet the main transportation and needs to be increased to meet the commuter mobility needs of the people of Bekasi City.
EVALUATION OF ENHANCED SOLAR DESALINATION SYSTEM PROTOTYPE Iqbal, Rofiq; Putra, Daffa Reyhan Aldrien; Arifianingsih, Nur Novilina; Dwinandha, Dhimas
INDONESIAN JOURNAL OF URBAN AND ENVIRONMENTAL TECHNOLOGY VOLUME 7, NUMBER 2, OCTOBER 2024
Publisher : Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/urbanenvirotech.v7i2.20768

Abstract

Solar desalination technology has been one of the effective solutions to tackle the problem of water scarcity. A number of studies have been conducted at our water research group to determine which variable influences the quantity of distilled water produced by an independent solar desalination unit. Aims: This study was aimed to design and optimize a novel solar desalination unit and field-tested using the best variable from the previous studies. Methodology and results: Variables used from the previous studies were evaluated to obtain the best values for each parameter, those are: glass cover inclination, gap distance between water and glass cover, insulation thickness, water depth, and water mass flow rate. Those best values were then implemented in the optimized basin design, delivery mechanisms, evaporation techniques, and heat isolation methods. The optimized design can generate up to 2,778.2 mL/m2/8hrs of distilled water with an efficiency of 23.35% in preliminary test, and was field tested at Batukaras Beach, where it produced up to 902 mL/m2/8hrs with an efficiency of 13.56%. Conclusion, significance and impact study: Meteorological parameters and environmental conditions are important factors that greatly affect the performance and productivity of the desalination unit. The relative humidity is inversely proportional to the volume of distillate water, where the smaller the value, the greater the amount of distillate water that can be produced, and it has significant impact on the productivity of the prototype. The quality of the distillate water produced still needs improvement on the parameters of pH, turbidity, and total coliform.
SIDOARJO VOLCANIC MUD AS PROMISING FENTON CATALYST FOR REMOVAL OF CONGO RED DYE Parningotan, Samuel; Direstiyani, Lucky Caesar; Adityosulindro, Sandyanto
INDONESIAN JOURNAL OF URBAN AND ENVIRONMENTAL TECHNOLOGY VOLUME 7, NUMBER 2, OCTOBER 2024
Publisher : Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/urbanenvirotech.v7i2.20772

Abstract

Sidoarjo mud is a volcanic mud (VM) that continues erupting in Sidoarjo to this day. The VM has the potential to be used in water treatment technology as a reagent or catalyst due to enormous amount of discharged flow and rich mineral content. Heterogeneous Fenton is one promising process for maximizing the VM potential, however customization is essential to optimize the process. Aim: This study aimed to investigate the catalytic abilities of Sidoarjo VM in Fenton oxidation by several modification approaches, such as calcination (CVM), impregnation-calcination (ICVM), and unmodified (UVM). Methodology and results: Fenton oxidation was carried out in a batch reactor system with the following conditions: initial congo red (CR) concentration= 50 mg/L; VCR=300mL pH=2; agitation speed=300 rpm; catalyst dosage=0.5 g/L; dan H2O2 concentration=485 mg/L. The highest performance results were achieved when the process was combined with adsorption, at 90% (CVM), 55% (ICVM), and 52% (UVM), respectively. Conclusion, significance, and impact study: The Sidoarjo volcanic mud shows high potential as a Fenton catalyst in the UVM modification technique with CVM reveals to be more suitable as an adsorbent.
INVESTIGATION OF MECHANICAL CHARACTERISTICS OF LIGHTWEIGHT CONCRETE USING ENVIRONMENTALLY FRIENDLY LIGHTWEIGHT AGGREGATES Nelfia, Lisa Oksri; Sekarningtyas, Nazifa; Sumarno, Agung; Rinanti, Astri; Amiri, Ouali
INDONESIAN JOURNAL OF URBAN AND ENVIRONMENTAL TECHNOLOGY VOLUME 7, NUMBER 2, OCTOBER 2024
Publisher : Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/urbanenvirotech.v7i2.19715

Abstract

This study aims to investigate the mechanical properties of lightweight concrete using lightweight aggregate and analyze the impact of silica fume on enhancing its compressive strength. The main objective of this study was to improve the value of industrial waste by utilizing GGBFS as a substitute for cement. Four alternative compositions have been used to produce samples of lightweight concrete. The coarse aggregate is substituted with 100% lightweight expanded clay aggregate, whereas the fine aggregates are replaced with 100% vermiculite and 100% polystyrene bead waste.                                A combination of 20% GGBFS and 10% silica fume is employed for cement replacement. The materials used throughout this study consist of aluminum powder and superplasticizer. The workability, compressive strength, tensile strength, and specific gravity of concrete will be determined by testing.                  The waster curing will be carried out on cylindrical concrete specimens 200 mm in height and 100 mm in diameter. Experimental results showed that the concrete mixture consisting of 80% cement and 20% GGBFS as binders, along with lightweight expanded clay aggregate as coarse aggregate and vermiculite as the fine aggregate, exhibits the highest compressive strength compared to other lightweight concrete mixtures.

Page 1 of 1 | Total Record : 7