Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

SAGA: Journal of Technology and Information Systems

saga
Website

Published by CV. Media Digital Publikasi Indonesia

ISSN : - EISSN : 29858933 DOI : https://doi.org/10.58905/saga

Core Subject : Science, Engineering,

Computer Science & IT Control & Systems Engineering Electrical & Electronics Engineering Library & Information Science

SAGA: Journal of Technology and Information Systems, a premier peer-reviewed academic international journal dedicated to the advancement of knowledge and research in the field of technology and information systems. Our journal is committed to publishing high-quality, original research that explores the intersection of technology and information systems in the contemporary world. We publish four issues (February, May, August, November) per year and welcome submissions from researchers at all career levels and from any geographic location. Our scope is divided into two sections, each containing twenty areas of focus Technology and Information Systems We are committed to promoting diversity and inclusivity in our editorial process and encourage submissions from underrepresented groups. Our rigorous peer review process ensures that only the most impactful and rigorous research is published in our journal.

Arjuna Subject : Ilmu Komputer (semua kategori) - Ilmu Komputer (Lain-Lain)

Articles 40 Documents

1 2 3 4

Validation Analysis of Learning Development on Optic Material with Core Learning Model Eva Fasihah; Nurul Hidayah Al Mubarokah
SAGA: Journal of Technology and Information System Vol. 1 No. 1 (2023): February 2023
Publisher : CV. Media Digital Publikasi Indonesia

This research is an activity process to produce learning tools that are developed in valid optical material, with the development path using the CORE learning model. The tools developed are syllabus, lesson plans, textbooks, worksheets and Critical Thinking Ability Test. However, in this paper, it is only focused on the validation test process through construct and content validation tests on the development of the device made. The final result of this research is to produce a valid learning device development product.

Implementation of Project Based Learning (PJBL) Model with the Assistance of Media E-Learning Chamilo to Improve Student's Understanding of Physics Concepts Mukhammad Nur Chasani; Agung Suci Dian Sari
SAGA: Journal of Technology and Information System Vol. 1 No. 1 (2023): February 2023
Publisher : CV. Media Digital Publikasi Indonesia

This study aims to: (1) produce physics learning by using Project Based Learning (PjBL) with the assistance of E lerning Chamilo media that is appropriate to increase students' understanding of physics concepts during a pandemic, (2) to find out how high the understanding of physics concepts is by using learning Project Based Learning (PjBL) Assisted by Media E Lerning Chamilo, (3) find out how high the understanding of students' concept understanding in learning physics is increased by using the Project Based Learning (PjBL) learning model assisted by E Lerning Chamilo's media. The subjects in this study were 108 students of SMA Negeri 1 Kejayan Class MIA 4, MIA 5 and MIA 6. This study uses the Project Based Learning (PjBL) method assisted by Media E Lerning Chamilo. Defining is the initial stage of developing learning based on task analysis and concept analysis. Design is the second stage of the development of this learning which aims to produce an initial design of thE-Learning to be developed. The next stage is development which consists of testing the first stage including validation from the validator. the second stage of testing, namely the trial phase includes student responses to learning, along with giving interest questionnaires and also pretest and posttest questions. The data analysis technique used to analyze each data is the conversion of quantitative to qualitative values for the validation of Project Based Learning (PjBL) learning assisted by the E Lerning Chamilo media and the conversion of quantitative to qualitative values and normalized gain for interest data and student tests. The results of the development of this media show that: 1) E Lerning Chamilo based physics learning media is suitable for use as a physics learning medium with the subject of momentum, impulse, and collision. 2) the use of Project Based Learning (PjBL) learning media assisted by E Lerning Chamilo media can increase students with a gain value of 4.10 (high category).

Application of Quizzz to Pascal Law Material in Increasing Student Response Zainul Arifin; Mohamada Zaky Tatsar
SAGA: Journal of Technology and Information System Vol. 1 No. 1 (2023): February 2023
Publisher : CV. Media Digital Publikasi Indonesia

Abstract. The research is motivated by the rapid development of the times so that there is a need for the latest innovations for students so as not to be left behind, especially in the field of technology, the method used in this research uses a quantitative method. The population and sample in this study were class XI MIPA with 19 students at MA Darul Ulum Karangpandan. The results of the analysis of student responses to the application of Quizizz were that students were interested and happy to learn to use Quizizz. This is evidenced by the results of the questionnaire data, namely the answers to the results of class XI MIPA with 19 students having an average of 78% strongly agree, 100% agree, 12% doubt, 0% disagree, and 0% strongly disagree. Based on the results of the study, it can be concluded that there is an effect of Quizizz on increasing student responses to Pascal's legal material.

Validity of Phet Simulation Assisted Poe2we Learning Model on Ideal Gas Materials Muhamad Aqil Ridho; Agung Suci Dian Sari
SAGA: Journal of Technology and Information System Vol. 1 No. 1 (2023): February 2023
Publisher : CV. Media Digital Publikasi Indonesia

The purpose of this study was to describe the validity of the POE2WE model physics learning device assisted by PhET simulation to improve students' critical thinking skills. The learning tools described include the syllabus, lesson plans, LKPD, textbooks and pre-test post-test questions. The research was conducted in class XI SMA Negeri 2 Pasuruan on ideal gases. Descriptive-quantitative data analysis technique by describing and describing the assessment in percentage of agreement. The results showed that the percentage of syllabus validity was 95.75% in the very valid category, the percentage of RPP validity was 96.75% in the very valid category, the LKPD validity was 96.50% in the very valid category, the validity of textbooks was 94.25% with the category is very valid, and the validity of the pre-test post-test is 95.50% with a very valid category. Based on the results of the analysis of the data obtained, it can be stated that the learning device developed is feasible to use with very valid criteria.

Literacy Education: Communication Literacy Model in Tudang Sipulung Culture in Patondonsalu Village at Enrekang District Ismaya; Mahmuddin; Arifuddin Tike; I Ibrahim
SAGA: Journal of Technology and Information System Vol. 1 No. 1 (2023): February 2023
Publisher : CV. Media Digital Publikasi Indonesia

This type of research is descriptive qualitative research conducted in the village of Patondonsalu, Enrekang Regency, focusing on the communication literacy model in the Tudang Sipulung culture. The results showed that the communication literacy model in the implementation of culture tudang sipulung in the Patondonsalu village is fine enough because it has fulfilled elements: identification topic/subject, target audience, relevant formats, types source; exploration sources, and information appropriate to the topic; organization, evaluation and compiling information according to the logical arrangement, distinguishing among facts and opinions, and uses visual tool aids for comparing and contrasting information; (who); (what is said); (communication channel); (to whom); and with what effect (element of influence/effect) or what is the effect of the communication. However, the applied communication literacy model is not yet maximum because there is not yet relevant selection and recording information, the creation information not yet well done, presentation, dissemination or display of information from results activity tudang sipulung also out yet there. Then output appraisal, based on other people input from implementation culture tudang sipulung still very low and almost no at once

The Elastic Properties of Objects by Determining Young's Modulus for the Characterization of Metal Raw Materials Using a Speed Sensor Encoder and a Load Cell Sensor Umi Pratiwi; Wahyu Tri Cahyanto; Sunardi
SAGA: Journal of Technology and Information System Vol. 1 No. 2 (2023): May 2023
Publisher : CV. Media Digital Publikasi Indonesia

The unique characteristic of a metal material can be determined from the value of Young's modulus which represents the ability of the material to deform in response to an external force given to the material. This study aims to determine the value of Young's modulus for three metal wires (copper, nickel, and steel) and the percentage of measurement errors using a self-designed Young's modulus kit equipped with a load cell sensor and speed sensor encoder. The measurement of Young's modulus was carried out in five experiments without any variation in diameter (the diameter was fixed and the same for all metals), and the results were compared with the reference values. The results showed that the values of Young's modulus for copper, nickel, and steel wires were 11.74 x 1010 N/m2, 21.63 x 1010 N/m2, and 20.84 x 1010 N/m2, respectively. The difference between the measured values and the reference values for Young's modulus for copper, nickel, and steel wires were 6.7%, 3.0%, and 4.18%, respectively. The small differences between the measured values and the reference values indicate that the measurement approach approximates the reference values and can be used to support other measurements involving Young's modulus values of a metal material

Evaluation of the Successful Implementation of the SIMARDI Using the Technology Acceptance Model (TAM) R Rosda; Muhammad Wali; I Imilda
SAGA: Journal of Technology and Information System Vol. 1 No. 2 (2023): May 2023
Publisher : CV. Media Digital Publikasi Indonesia

The purpose of this study is to evaluate acceptance by archivists of the SIMARDI archive application developed specifically for archive management and classification of archives from public institutions and private individuals. The application provides systematic and structured processing capabilities that enable archivists to effectively manage records, control high-level file management systems, and track archived data quickly and accurately. The methodology used in this study is the Technology Adoption Model (TAM). It has been shown to be effective in describing and predicting user acceptance of technology. The study was conducted by collecting data through questionnaires completed by 30 SIMARDI application users. This questionnaire was designed to measure archivist perceptions of the SIMARDI program and the factors that influence their use of the application. The results showed that archivists positively accepted the SIMARDI application. Usability reached 74%, usability 72.57%, and technology acceptance 73.80%. The study recommends that SIMARDI application developers focus on improving usability variables that score poorly. The results of this research will help increase user adoption not only for government and private organizations looking to implement efficient and user-friendly filing systems, but also for application developers

Network Design Using Load Balancing Equal Cost Multi Path (ECMP) Method At Lexima Consultant Office Renna Yanwastika Ariyana; Virdiyansyah D. Abdillah
SAGA: Journal of Technology and Information System Vol. 1 No. 2 (2023): May 2023
Publisher : CV. Media Digital Publikasi Indonesia

The development of technological advances also contributed to the advancement of Internet technology. Where the Internet is one of the needs that is considered important in all fields, this is evidenced by the number of Internet users from 2020 to 2023 having a significant increase. Lexima Consultant as one of the institutions engaged in information system creation services, of course, requires an internet connection. However, there are several obstacles faced, one of which is the absence of a load balancing and failover network system which sometimes makes the need for internet access with large bandwidth allocations to be disrupted and even cut off. Implementing the right technique at the Lexima Consultant office for sending data packets as the main factor supporting activities is certainly very much needed. In the research conducted, a load balancing technique was used using the ECMP method to optimize network performance and avoid internet network disturbances. From the research conducted, it can be concluded that the implementation of the load balancing method using the ECMP method has been able to divide connection paths and failover can run properly, so the possibility of disruption in the form of a network connection loss will be very small

Increased Coal Slagging Index by Using Zeolite Synthetic Idi Amin; Muh. Zulfikri Syahbar
SAGA: Journal of Technology and Information System Vol. 1 No. 2 (2023): May 2023
Publisher : CV. Media Digital Publikasi Indonesia

The use of coal as fuel has experienced several obstacles, one of which is the formation of Slagging (crust). Slagging is formed by the melting point of coal ash or low ash fusion temperature, caused by low levels of Al2O3 in coal ash. The addition of synthetic zeolite to coal before use is intended to increase the level of Al2O3, so that it will increase the ash fusion temperature of coal ash. The increase in ash fusion temperature also causes an increase in the slagging index of coal. With the high increase in the slagging index obtained, the lower the potential for the formation of slagging. The smaller the potential of Slagging formed, the use of coal also decreases. This study aims to determine the effect of adding waste-based synthetic zeolite to coal ash on increasing coal slagging index. Research uses a type of experimental research. Itis collected by conducting laboratory tests, namely making observations and direct testing of samples with variations in the addition of synthetic zeolite to coal by 5%, 10%, and 15%. The results showed that synthetic zeolite added to coal was able to reduce the potential for slagging formation. Slagging index from the results of research for oxidation conditions is a standard sample of 1,246oC, SBZ5 by 1,242oC, SBZ10 by 1,250oC, and SBZ15 by 1,274oC. Reduction conditions i.e. standard sample of 1,130oC, SBZ5 by 1,116oC, SBZ10 by 1,136oC, and SBZ15 by 1,168oC. SBZ15 sample is a variation that has a good slagging index, which is for oxidation conditions which is 1,274oC, and for reduction conditions that is 1,168oC

Welder Recruitment Decision Support System Using the SMARTER Method Wahyuni Fithratul Zalmi; Bernad J. D. Sitompul; Sastra Wandi Nduru; Sedihati Kayan Lumbangaol
SAGA: Journal of Technology and Information System Vol. 1 No. 2 (2023): May 2023
Publisher : CV. Media Digital Publikasi Indonesia

The high level of competition in the world of welding services business today makes the welding workshop entrepreneurs struggle hard to optimize the human resources as the welders own. The task is to recruit a skilled worker. This is due to the fact that the company is able to compete in the world of business services, the manufacturer of welding is very interested in the quality of the product so that the consumer is interested in improving the services offered by the business owner. In this study, to support the results of decision-making made in the recruitment process of welders, the SMARTER method is applied. On the final results of this study can be seen that the results of the application of the SMARTER method for comparison with 5 alternatives that are selected, that is, who obtained the first ranking is Joko with a value of 1.74. Then in the next ranking position is Tian (1.56) as the second ranking, Rian (1.06) third rank, Raden R (0.88) fourth ranking, and Budi Ramadhan (0.36) in the last ranking position

Page 1 of 4 | Total Record : 40

1 2 3 4

Filter by Year

2023 2024

Filter By Issues

All Issue Vol. 2 No. 4 (2024): November 2024 (IN PRESS) Vol. 2 No. 3 (2024): August 2024 Vol. 2 No. 2 (2024): May 2024 Vol. 2 No. 1 (2024): February 2024 Vol. 1 No. 4 (2023): November 2023 Vol. 1 No. 3 (2023): August 2023 Vol. 1 No. 2 (2023): May 2023 Vol. 1 No. 1 (2023): February 2023

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Robbi Rahim

Contact Email
usurobbi85@zoho.com

Phone
+62818639363

Journal Mail Official
saga@mediadigitalpublikasi.com

Editorial Address
JL. Kenari 18 No. 421 Desa/Kelurahan. Kenangan, Kec. Percut Sei Tuan, Kab. Deli Serdang, Kab. Deli Serdang, Provinsi Sumatera Utara, 20226, Indonesia

Location
Kota medan,

Sumatera utara

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Robbi Rahim

Contact Email usurobbi85@zoho.com

Phone +62818639363

Journal Mail Official saga@mediadigitalpublikasi.com

Editorial Address JL. Kenari 18 No. 421 Desa/Kelurahan. Kenangan, Kec. Percut Sei Tuan, Kab. Deli Serdang, Kab. Deli Serdang, Provinsi Sumatera Utara, 20226, Indonesia

Location Kota medan, Sumatera utara INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Robbi Rahim

Contact Email
usurobbi85@zoho.com

Phone
+62818639363

Journal Mail Official
saga@mediadigitalpublikasi.com

Editorial Address
JL. Kenari 18 No. 421 Desa/Kelurahan. Kenangan, Kec. Percut Sei Tuan, Kab. Deli Serdang, Kab. Deli Serdang, Provinsi Sumatera Utara, 20226, Indonesia

Location
Kota medan,

Sumatera utara

INDONESIA