cover
Contact Name
Fachrul Rozie
Contact Email
fachrul.rozie@politap.ac.id
Phone
+6281255442202
Journal Mail Official
entries@politap.ac.id
Editorial Address
Jl. Rangga Sentap, Dalong Sukaharja, Kab. Ketapang, Provinsi Kalimantan Barat, 78813
Location
Kab. ketapang,
Kalimantan barat
INDONESIA
ENTRIES
ISSN : -     EISSN : 29872170     DOI : https://doi.org/10.58466/entries
Journal of Electrical Network Systems and Sources (ENTRIES) is a peer-review journal published by Politeknik Negeri Ketapag . Journal of electrical network system and sources aims to provide a forum for academic researchers, industrial professionals, engineers, consultants, managers, educators and practitioners to contribute and disseminate innovative new work on electrical engineering related smart electrical network and system. All accepted papers will be published twice a year which is available online (open access). The manuscripts should be well presented in English or Indonesian. The author must follow ENTRIES template otherwise, the paper will not be processed.
Articles 67 Documents
Rancang Bangun Sistem Transfer Layout PCB Berbasis Arduino Uno R3 Surya Prasetyo, Adhe; Hasan, Hasan
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1638

Abstract

PCB layout transfer system is the process of transferring ink on paper to PCB board to produce component paths. The PCB layout transfer process is an important role in electronic circuit design. The PCB layout transfer process is usually used using an iron that takes a long time. This research is the manufacture of tools that aim to increase efficiency in the process of transferring PCB layoutink transfer process from paper to PCB board which can be set transfer process time with the terms of time set by the user. The results of the PCB layout transfer system research use the Arduino UNO microcontroller , thermocouple temperature sensor, 20 x 4 LCD, DC Motor, L298N Motor Driver, MAX 6675 Driver, Heating Plate, RotaryEncoder , and Relay Module 2 Channel. This system provides an effective semi-automatic solution in the PCB layout transfer process.
RANCANG BANGUN SMART AGRICULTURE UNTUK TANAMAN HORTIKULTURA MENGGUNAKAN MIKROKONTROLER pebri, nemisius; Fadillah, Nurul; Chryostomos Hendro Yuwono, Yohanes; Yuwono Tharam , Medi; Rusyda , Nanda
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1640

Abstract

Soil is a primary factor in agriculture that must be carefully considered to achieve optimal results. Irrigation, fertilization, and soil acidity monitoring are crucial for plant growth. Soil moisture influences plant growth, and the type and composition of the soil also play an important role. Automated drip irrigation and soil pH monitoring methods are essential for horticultural plants to grow well and efficiently. An automatic drip irrigation system, scheduled fertilization, and soil pH monitoring aid in plant growth and monitoring efficiency. This device uses capacitive sensors to detect soil moisture and pH levels. If the soil moisture is below 45%, the water pump will activate until the moisture reaches 75%. The detected moisture and pH levels are displayed on an LCD. The Arduino Uno controls the moisture using a soil moisture sensor, displaying wet or dry conditions. The pH sensor displays the soil acidity level ranging from 2 to 14 on the LCD.
Rancang Bangun Sasaran Tembak Berbasis Mikrokontroler widi kurniawan, adrik; Sufandi, Muhammad Ridhwan; Rahayu, Wiwit Indah
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1641

Abstract

Members of the Indonesian National Armed Forces (TNI) are required to master shooting skills through regular practice. However, the efficiency of shooting training is often hampered by the absence of an automatic target scoring system. To address this issue, a device in the shape of a square with dimensions of 50x50 cm was developed, equipped with laser sensors on the x and y axes. This device can automatically detect and calculate scores when a bullet hits the target accurately, with the results displayed on a P10 monitor. This tool aims to enhance the efficiency and accuracy of shooting training for TNI members.
Rancang Bangun Modul Pembelajaran Elektronika Digital Dalam Meningkatkan Efisiensi Pembelajaran Mahasiswa Rezar, Habil; Riyanto, Agus
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1643

Abstract

This research aims to develop learning methods at Pontianak State Polytechnic to improve practicum efficiency and student understanding in digital electronics courses. The research includes making learning modules in the form of trainers, antibounce switches, system trials, and tool demonstrations. The developed module is equipped with a guidebook and includes power blocks, inputs, outputs, circuits, as well as guidebooks with logic, combinational, and sequential gate circuits. Data was collected through testing the efficiency of the module by comparing the usage time of the module and IC with the protoboard, as well as a survey to 3rd semester Electrical Engineering students using Google Forms. Quantitative descriptive data analysis shows that assembly with the module is faster than with manual IC. The module feasibility test results showed a percentage of 88% on material, 89% on technical, 92% on feasibility, and 91% on benefits, indicating that the module is very feasible to use as a companion to digital electronics courses.
Monitoring Tegangan, Arus, dan Daya Pada PLTS 20WP Berbasis Internet of Things (IoT) Deyi, Deyi; Satriyo, Satriyo; Syamsudin, Mariana; Rianda, Rianda; Ilyas Hadikusuma, Mohd
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1644

Abstract

Solar Power Plants (PLTS) have great potential in Indonesia due to the year-round sunshine. To monitor the performance of solar panels, which are the main component of PLTS, an effective monitoring system is required. However, there are several challenges in remote monitoring of PLTS. The solution is to use a device that helps humans monitor PLTS performance and send notifications to phones or computers via the internet. One platform that can be used is Adafruit, an IoT platform that offers remote monitoring via the internet with hardware support and a broad community. The obtained data show that the measurement values of current, voltage, and power from the battery, solar panels, and inverter have relatively small deviations, with a Relative Deviation Average (RSR) of 4.4676%. The Overall Accuracy Rate, reaching 95.5324%, indicates that the system is reliable in providing accurate measurements, closely matching the expected reference values. Keywords: Monitoring System, Internet of Things (IoT), Adafruit.
Rancang Bangun dan Implementasi Robot Line Follower Automatic Guide Vehicle (AGV) untuk Pengangkutan Barang Berbasis Arduino Nur Insani, Fadlur; Syamsudin, Mariana; Riyanto, Agus; Mardianto, Eko; Rianda, Rianda
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1653

Abstract

In the era of digitalization 4.0, technology plays a crucial role in enhancing efficiency across various industrial sectors. This research proposes the design and development of a Robot Line Follower AGV for automated goods transportation. This robot utilizes an Arduino Uno microcontroller as the control center and is equipped with four primary sensors: IR TCRT5000, Ultrasonic HC-SR04, Load Cell, and TCS3200 Color Sensor. Output indicators, including a Buzzer and LED, provide operational feedback, while a DC motor is controlled by a PID algorithm to ensure accurate movement along the path. The development of this system is expected to improve the efficiency of goods transportation processes while fostering innovation in the industrial and creative economy sectors.
Rancang Bangun Trainer PLTS 50WP Untuk Menghidupkan Blower Kompor Konvensional Ishak Allkadri, Syarif; Darmawan, Heri; Riatno, Riatno
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1654

Abstract

Utilization of renewable energy, such as Solar Power Plants (PLTS), is becoming increasingly important in efforts to reduce dependence on fossil energy and reduce greenhouse gas emissions. The 50WP PLTS Trainer is designed to provide a practical and in-depth understanding of the installation and operation of small capacity PLTS. This trainer has a capacity of 50 watt peak (WP) and is specifically designed to turn on the blower on conventional stoves. The main components of this trainer include solar panels as the main energy source, a charging controller to regulate the current and voltage from the solar panels to the energy storage battery, and an inverter to convert direct current (DC) to alternating current (AC) needed to operate stove blower. Through the use of this trainer, users can learn the process of installing solar panels, designing battery charging systems, and setting up inverters to ensure compatibility and efficiency in operating conventional electrical devices. Thus, the 50WP PLTS trainer is an effective tool in supporting education and development of renewable energy technology in various environments. Keywords: Solar Power Plant (PLTS), PLTS Trainer, conventional stove, blower, solar energy.
RANCANG BANGUN SISTEM CERDAS PADA KANDANG ANAK AYAM KAMPUNG BERBASIS ARDUINO UNO Muhammad Farras, Rahim; Rianda, Rianda; Ilyas Hadikusuma, Mohd; Sarianto, Agus
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1658

Abstract

ABSTRACK Relating to climatic conditions or areas that have unstable temperatures. Many plants and animals experience physical weakness. Just like free-range chickens, they really need stable and adequate temperature conditions, so they can grow well and optimally. The optimal temperature for free-range chickens during the brooding period ranges from 31-32°C. Therefore, it is important to regulate the temperature of the cage to suit the needs of the chicks. When the chicks are still small, the temperature used as an artificial heating device is a yellow incandescent lamp installed in the cage to provide warmth to the chicks. To maintain the temperature in the free-range chicken coop. So, the right method is to provide a stable temperature for free-range chicks. An Intelligent System is used in the Village Chicken Cage, to be able to maintain the temperature in the cage remains stable and optimal, as well as automatic feeding and drinking. With the Smart System in the Village Chicken Cage, the village chicks can grow well. The temperature in this tool system can be maintained according to the set point, feeding also becomes automatic, so that when this tool is used, free-range chicks in the cage are rarely attacked by disease and can grow healthily and optimally. Keywords: intelligent system for free-range chicks, drum temperature regulation, automatic feeding and drinking.
Sistem Kontrol Otomatis Pembuatan Larutan Nutrisi Pada Budidaya Hidroponik: Sistem ini mengotomatisasi pencampuran dan pengaturan nutrisi yang presisi, memastikan tanaman hidroponik mendapatkan nutrisi yang optimal secara konsisten dengan pemantauan real-time. Yurika, Yurika; Yuwono , Medi; Hasan, Hasan
Electrical Network Systems and Sources Vol 3 No 2 (2024)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1676

Abstract

With the aim of designing and implementing a system. automatic control of making nutrient solutions in hydroponic cultivation based on the Arduino Megapro 2560 microcontroller. application of technology in the agricultural sector, providing a solution to automatically monitor and control the nutrient content in hydroponic growing media, involving TDS sensors, keypads, ultrasonic sensors, DC pumps, and relay modules . Automatic production of AB Mix Nutrients to achieve certain PPM values according to the needs of plants such as lettuce, basil (kemuning), bitter mustard greens, peas is carried out based on the main values, Mix A and Mix B, the results of the TDS sensor sensing. This tool is also equipped with a 16x2 LCD to display PPM information and system control.
Rancang Bangun Mesin Pelontar Shuttlecock Otomatis Ridwan, Muhammad; Rianda, Rianda; Chrysostomos Hendro Yuwono, Yohannes
Electrical Network Systems and Sources Vol 2 No 1 (2023)
Publisher : entries

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.58466/entries.v3i2.1687

Abstract

This research aims to develop an automatic shuttlecock throwing machine with motion rotation system using ARDUINO UNO REV3 microcontroller, in order to increase the effectiveness of badminton training. In improving players' agility and reflexes, this system is designed to provide a long and accurate pass with a shuttlecock throwing distance of up to 10 meters, adjusting the size of the badminton court. This research includes the stages of searching for current data, detailed design planning, and manufacturing of the machine consisting of two main parts: shuttlecock throwing system and machine rotation system, with the hope that this system can function optimally in supporting badminton players' training.