cover
Contact Name
Andi Adriansyah
Contact Email
andi@mercubuana.ac.id
Phone
+628111884220
Journal Mail Official
sinergi@mercubuana.ac.id
Editorial Address
Fakultas Teknik Universitas Mercu Buana Jl. Raya Meruya Selatan, Kembangan, Jakarta 11650 Tlp./Fax: +62215871335
Location
Kota adm. jakarta barat,
Dki jakarta
INDONESIA
Sinergi
ISSN : 14102331     EISSN : 24601217     DOI : https://dx.doi.org/10.22441/sinergi
Core Subject : Engineering,
SINERGI is a peer-reviewed international journal published three times a year in February, June, and October. The journal is published by Faculty of Engineering, Universitas Mercu Buana. Each publication contains articles comprising high quality theoretical and empirical original research papers, review papers, and literature reviews that are closely related to the fields of Engineering (Mechanical, Electrical, Industrial, Civil, and Architecture). The theme of the paper is focused on new industrial applications and energy development that synergize with global, green and sustainable technologies. The journal registered in the CrossRef system with Digital Object Identifier (DOI). The journal has been indexed by Google Scholar, DOAJ, BASE, and EBSCO.
Articles 619 Documents
Microstructural and mechanical enhancement of resistance spot welding with initial gap using TiO₂ and Fe nanoparticle interlayers Bilal Mohammed Qasim; Ahmed Yashar
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.013

Abstract

The welding time, current intensity, and electrode pressure are critical parameters in resistance spot welding. The initial gap often arises during spot welding of automotive repair structures, hindering the attainment of excellent welds. These variables evidently affect welding quality, hence compromising the structural integrity and safety of the vehicle. This study's novelty lies in the use of two interlayer types in a spot-welding technique to produce microstructurally strong lap joints. It assesses the influence of interlayer composition on microstructural evolution and the formation of the weld nugget under tensile shear stress. The influence of three initial gap dimensions (0.5 mm, 1 mm, and 1.5 mm) was analyzed using two varieties of interlayer nanoparticles (iron particles and TiO₂) to fill the gaps by compaction, excluding the incorporation of filler material; the investigation evaluated the mechanical properties of the welded joints. The results demonstrated a significant increase in joint strength relative to a direct connection without an interlayer; this enhancement is influenced by the gap size and the type of nanoparticles used to fill it. At a plate gap of 0.5 mm, both iron and TiO₂ particles significantly enhance weld strength; this effect is also observable at a separation of 1 mm. Nonetheless, when the gap widened to 1.5 mm, adding an interlayer did not affect the strength of the welded plates. Results demonstrate that nanoparticle interlayers substantially affect gap size by enhancing welding conditions in vehicle repair. The study clarifies the importance of nanoparticle augmentation in closing gaps, hence enhancing joint efficacy and structural integrity.
Synergistic effects of low-cost graphene and coal fly ash on the strength–porosity performance of cellular lightweight concrete Yola Bertilsya Hendri; Ahlun Nazar; Geta Arianty; Dhina Febryza; Hussein A. Miran; Zainab N. Jaf; M. Mahbubur Rahman; Hatem Taha; Zhong Tao Jiang; Amun Amri
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.025

Abstract

Cellular lightweight concrete (CLC) is attractive for envelope and infill applications due to its low density and low thermal and sound insulation. However, its high pore volume often reduces compressive strength and limits wider application. Graphene-based additives and fly ash have been widely studied in cementitious composites. However, their combined effect in low-density CLC remains insufficiently understood, particularly regarding the strength-porosity balance, cellular pore stability, and microstructural mechanism. This study investigated the synergistic effect of low-cost graphene produced by turbulence-assisted shear exfoliation (TASE) and coal fly ash on CLC with a target density of approximately 1.1 g·cm⁻³. TASE graphene was selected because its aqueous shear-exfoliation route offered lower processing complexity, better scalability, and stronger cost potential than many commercial or oxidized graphene derivatives, making it more suitable for large-volume cementitious applications. CLC mixtures containing 0–15 wt.% graphene and 0 or 5 wt.% fly ash were cast and cured for 14 and 28 days. Compressive strength, porosity, and microstructure (SEM/TEM) were evaluated. Among the investigated mixtures, the mixture containing 10 wt.% graphene and 5 wt.% fly ash produced the best strength–porosity performance, achieving the highest 28-day compressive strength of 1.86 ± 0.20 MPa and the lowest porosity of 23.70%. Compared with the graphene-free mixture at the same fly ash level, this composition increased strength by 64.60% and reduced porosity by 14.84%. SEM/TEM observations supported a dosage-dependent mechanism involving graphene-assisted nucleation, fly ash-assisted pozzolanic densification, pore-wall refinement, and reduced reinforcement efficiency at excessive graphene loading. These findings supported the practical design of graphene–fly ash modified CLC material systems.
Real-time multiobjective optimization for home load scheduling on an embedded device using an integrated SCADA–AI system Akbar Nursya’banni Ardiyanto; Aryuanto Soetedjo; Irmalia Suryani Faradisa
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.014

Abstract

Home energy management systems (HEMS) are designed to monitor and optimize residential energy consumption. This paper proposes an approach that integrates artificial intelligence (AI)-based optimization with a supervisory control and data acquisition (SCADA) system within an HEMS implemented on a Raspberry Pi embedded device using Node-RED and Python. The novelty of this work lies in enabling real-time SCADA monitoring and AI-based optimization on a single embedded platform. The theoretical implication of this study is the conceptualization of an integrated edge-based optimization design for HEMS, where multiobjective scheduling is embedded within the operational layer of the system architecture, contributing to the development of decentralized and edge-enabled energy management systems. The contributions include: (1) the development of an integrated SCADA–AI framework for real-time load scheduling on an embedded device; (2) the formulation of a multiobjective optimization model that minimizes grid-imported energy, maximizes photovoltaic (PV) utilization, and reduces the peak-to-average ratio (PAR); and (3) the comparative evaluation of three meta-heuristic algorithms—genetic algorithm (GA), particle swarm optimization (PSO), and ant colony optimization (ACO)—using real IoT-based SCADA monitoring data. The system schedules household loads, including the water heater, rice cooker, washing machine, and microwave oven. Experimental results show that GA achieved the best performance, reducing grid energy by 6.91%, increasing PV utilization by 14.91%, and lowering PAR by 24.44% compared to random scheduling. The execution times of GA, PSO, and ACO on Raspberry Pi 5 were 0.70 s, 0.38 s, and 1.42 s, respectively, demonstrating suitability for real-time embedded applications.
Hospital resilience in earthquake-prone regions: a novel evaluation of base isolation systems for structural and functional performance in West Lombok Lalu Ibrohim Burhan; Ni Nyoman Kencanawati; Buan Anshari
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.015

Abstract

Earthquakes pose a significant threat to hospital infrastructure, where uninterrupted functionality is critical for emergency response and post-disaster recovery. While base isolation systems have been widely recognized for reducing structural damage, their effectiveness in enhancing functional resilience remains insufficiently quantified. This study evaluates the seismic performance of three base isolation systems, Lead Rubber Bearings (LRB), High-Damping Rubber Bearings (HDRB), and Friction Pendulum Systems (FPS), applied to a representative hospital building in West Lombok using nonlinear finite-element analysis based on SNI 1726:2019 response-spectrum loading. Structural performance is assessed through key parameters, including base shear, natural period, inter-story drift, and lateral displacement. The results indicate that FPS provides the most significant performance improvement, reducing base shear by 35.6%, lateral displacement by 27.0%, and inter-story drift by 37.5%, while increasing the fundamental period by up to 692%. To address the limitations of conventional structural evaluation, this study introduces a quantitative Resilience Index (R) defined as the normalized reduction ratios of structural response parameters relative to the fixed-base condition. FPS achieves the highest resilience scores (R = 0.356 for base shear, 0.270 for displacement, and 0.375 for drift), outperforming HDRB and LRB systems. These improvements indicate enhanced structural robustness, which correlates with reduced expected downtime and improved immediate occupancy performance. The integration of structural and functional performance metrics represents a shift from conventional design approaches toward resilience-driven engineering decision-making. The findings demonstrate that base isolation systems, particularly FPS, significantly improve both structural safety and post-earthquake operational continuity of hospital facilities. Furthermore, the proposed resilience-based evaluation framework provides a scalable approach to integrating structural performance and functional recovery metrics into the seismic risk assessment of critical infrastructure, supporting resilience-based seismic design strategies for healthcare infrastructure in developing seismic regions.
Comparative analysis of hydraulic performance of oblique and triangular labyrinth weirs with equal crest length: An experimental investigation Arody Tanga; Vera Wim Andiese; Siti Rahmi Oktavia; Zeffitni Zeffitni; Tiffani M. Putri Mantong; Rezky Susmono Karuru
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.016

Abstract

Optimizing discharge capacity while maintaining low upstream water levels remains a challenge in hydraulic engineering, especially in constrained channels such as urban waterways, valleys, and flood-prone corridors. Oblique and triangular labyrinth weirs have been developed to increase effective crest length without widening the channel; however, the lack of direct experimental comparison under identical geometric conditions still leads to uncertainty in practical design selection. This study presents an experimental investigation and comparative performance analysis of an oblique and a triangular labyrinth weir with equal crest length (100 cm) under controlled laboratory conditions. The models, constructed from 10 mm acrylic sheets, were tested under steady free-flow conditions in a laboratory flume measuring 16.00 m × 0.50 m × 0.40 m. Discharge and upstream head were systematically measured to evaluate the discharge coefficient as a function of normalized head. The results showed that both nonlinear weirs outperformed a conventional linear weir (maximum discharge coefficient of 0.62), with the oblique weir achieving the highest performance with a peak discharge coefficient of 0.70, followed by the triangular labyrinth weir (0.66). At an equivalent upstream head of approximately 0.025 m, the oblique weir conveyed approximately 10–12% higher discharge than the labyrinth weir and 35–40% higher than the linear weir. The oblique weir outperformed the others due to reduced contraction, better flow alignment, and lower energy losses. In contrast, the triangular labyrinth weir suffered from nappe interference at higher heads, reducing efficiency. Overall, the oblique weir performed better and was more practical.
GA-Optimized machine learning surrogate models for aerodynamic prediction using wind tunnel data Purwadi Sukadji; Syafaruddin Syafaruddin; Andani Ahmad; Ivransa Zuhdi Pane
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.017

Abstract

Wind tunnel testing is essential for obtaining accurate aerodynamic coefficients but remains costly and time-consuming due to the large number of required test configurations. This study proposes a robust surrogate modeling framework by integrating Genetic Algorithm (GA)-based hyperparameter optimization with GroupKFold cross-validation using an Indonesian Low-Speed Tunnel (ILST) dataset containing 13,200 samples from a 20-passenger aircraft. After data preprocessing, five regression models, Support Vector Regressor (SVR), Artificial Neural Network (ANN), Decision Tree (DT), Random Forest (RF), and XGBoost, were optimized to predict six aerodynamic coefficients (K1–K6). The optimized ANN achieved high predictive accuracy, while the tree-based ensemble models consistently demonstrated superior generalization performance. Among all models, XGBoost produced the best overall results, slightly outperforming Random Forest in both interpolation and extrapolation tasks, highlighting its effectiveness in modeling complex nonlinear aerodynamic behavior. Although all models performed well within the training domain, the ensemble methods exhibited greater robustness when predicting previously unseen operating conditions. These findings demonstrate that GA-optimized tree-based ensembles provide an accurate and computationally efficient surrogate modeling framework, significantly reducing dependence on costly wind tunnel experiments while maintaining high prediction fidelity.
Early age electrochemical behavior and initial effectiveness of waste-derived Al–Zn hybrid sacrificial anodes on steel bar corrosion control in geopolymer concrete Pinta Astuti; Muhammad Fauzan Abdillah; Monika Ayu Nelly Kusumawati; Naftali Zahra Athira; Satya Putra Ramadhan; Sausan Jilan Muthi'ah Izma; Adhitya Yoga Purnama; Rahmita Sari Rafdinal
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.018

Abstract

Problems related to waste, particularly metal and battery waste, represent a significant and growing environmental challenge. While recent studies have explored either waste-derived materials in geopolymer concrete or conventional sacrificial anodes for corrosion protection, the integrated application of hybrid waste-based sacrificial anodes with supplementary cementitious systems for effective and sustainable cathodic protection in reinforced concrete remains largely unexplored. This study presents a novel approach by simultaneously utilizing aluminum can waste and used battery materials as an Al-Zn hybrid sacrificial anode system combined with fly ash and rice husk ash–modified geopolymer concrete for corrosion mitigation. The primary objective of this research is to evaluate the effectiveness of waste-based sacrificial anodes in inhibiting reinforcement corrosion while maintaining the mechanical performance of concrete. The study employed an experimental investigation with mechanical property evaluation and electrochemical monitoring. The results of early connection demonstrated that geopolymer concrete containing 6% rice husk ash and 94% fly ash of precursor achieved the optimal performance, exhibiting a depolarization value exceeding 100 mV, reduced corrosion potential in half-cell measurements, and a stable anode current output, confirming effective cathodic protection according to SACP criteria. Corrosion behavior was assessed through half-cell potential and depolarization measurements, while concrete performance was verified using key mechanical and durability indicators. These findings indicate that a waste-based sacrificial anode system offers a promising, environmentally sustainable alternative for corrosion protection in reinforced concrete infrastructure.
Evaluation of initialization strategies in fuzzy self-tuning PI control for a 4×4 methanol–water distillation system Abdul Wahid; Fathur Rahman; Dianursanti Dianursanti
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.019

Abstract

Effective control of methanol–water distillation is essential in dimethyl ether (DME) production due to strong nonlinearities and multivariable interactions. This study presents a comparative evaluation of fuzzy self-tuning proportional–integral (FSTPI) controllers with different initialization strategies in a 4×4 multivariable distillation system. Three variants—working-space (FSTPI-WS), working-range (FSTPI-WR), and PI-initialized FSTPI (FSTPI-PI Tuned)—are benchmarked against conventional PI controllers using a validated dynamic model implemented in MATLAB/Simulink with a C-based S-function for real-time adaptation. Controller performance is evaluated under ±5% setpoint changes and realistic disturbances in feed temperature and flow rate using integral absolute error (IAE), integral squared error (ISE), and interaction analysis. The results demonstrate that initialization strategy critically determines adaptive control performance. The FSTPI-PI Tuned consistently achieves the best performance, reducing IAE and ISE by more than 98% in the most interactive loop (condenser liquid level). For temperature-induced disturbances, IAE and ISE reductions exceed 98% and 99%, respectively. These findings indicate that fuzzy self-tuning is most effective when applied as an adaptive refinement layer atop a well-tuned PI controller, rather than as a standalone compensation mechanism, thereby providing a practical and computationally efficient solution for multivariable distillation control.
WS-Det: an efficient whale shark detection via integrated feature modulation module Stephan Adriansyah Hulukati; Muhamad Dwisnanto Putro; Irvan Abraham Salihi; Hebron Prasetya; Imanuel Kutika; Hoang Van Thanh
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.020

Abstract

Whale sharks are vital plankton feeders that help maintain marine ecosystem stability and serve as key ecotourism assets supporting Gorontalo's blue economy. Reliable detection and identification systems are essential for monitoring their habitats and behaviors. Vision-based methods offer non-invasive observation without physical contact or electromagnetic interference. YOLOv12, a state-of-the-art object detector, achieves high localization accuracy with its lightweight "nano" variant. However, lightweight models often struggle with complex feature discrimination, which can be mitigated by integrating enhancement blocks to boost detection performance while maintaining computational efficiency. In this paper, we introduce a novel vision-based whale shark detection framework (WS-Det), which enhances YOLOv12-nano with MOGA attention modules. The proposed model incorporates lightweight convolutional operations to ensure efficient feature extraction while keeping computational cost low. The Integrated Feature Modulation (IFM) module improves backbone performance by selectively emphasizing spatially salient regions while interacting with multi-spatial-frequency information, thereby improving the overall robustness of feature learning. To support this study, we also present a dedicated whale shark dataset comprising underwater and aerial (drone-based) images for direct and practical monitoring. Experimental evaluations demonstrate that the WS-Det outperforms the baseline YOLOv12-nano and other efficient detectors, achieving higher detection precision. On the proposed dataset, the model achieves an mAP@0.5 of 0.979 and an mAP@0.5:0.95 of 0.868. It contains 2,191,459 parameters and requires 6.3 GFLOPs, indicating a low computational cost. Inference speed evaluations show the model runs at 17.19 FPS on a desktop PC and 6.64 FPS on a Raspberry Pi 5, confirming its suitability for deployment on resource-constrained devices.
Designing the framework architecture of a blockchain-based cooperative oversight system in Indonesia: a Socio-Technical System (STS) approach Agus Mulyanto; Riri Fitri Sari; Rachma Fitriati; Muhammad Firdaus Syawaludin Lubis
SINERGI Vol. 30 No. 3 (2026)
Publisher : Universitas Mercu Buana

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22441/sinergi.2026.3.021

Abstract

Indonesia’s cooperative sector plays a strategic role in inclusive economic development, yet persistent weaknesses in supervision continue to produce fragmented information, inconsistent data, and governance risks across administrative levels. These conditions motivate the design of an integrated e-government architecture for cooperative oversight. This study designs a framework architecture for a blockchain-based cooperative oversight system in Indonesia using a qualitative case study approach and Socio-Technical Systems (STS) theory to derive architectural requirements from institutional, regulatory, and organizational conditions. Data were collected through interviews and focus group discussions with 46 participants, as well as through the analysis of national regulations. The proposed framework specifies a six-layer e-government architecture aligned with ISO 23257:2022, comprising blockchain, service, access, application, security and privacy, and infrastructure layers. The architecture defines permissioned participation, role-based identity management, standardized oversight workflows, and hybrid on-chain and off-chain data management to support traceable and coordinated supervision across institutions. The designed framework provides an architectural foundation for strengthening cooperative oversight while accommodating heterogeneous institutional capacity, regulatory requirements, and uneven digital infrastructure in Indonesia.