cover
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kab. aceh besar,
Aceh
INDONESIA
Journal of Aceh Physics Society
ISSN : -     EISSN : 23558229     DOI : -
Core Subject : Science,
Focus of Journal of Aceh Physics Society (JAcPS) provides a forum for original paper works that enhances understanding of physics and their application. Scope of Journal of Aceh Physics Society (JAcPS) paper related to the development of new experimental methods, visualization techniques, material physics, optic, laser and instrumentation in physics is an important part of this journal. Experience gained and lessons learned in building test facilities and in measuring and reducing test data are important aspect of any experimental work. Authors are encouraged to report this experience and to summarize the original data. Archival review paper, short communication, invited papers, discussion of previously published papers, and book reviews are regular feature of the journal, in addition to full-length article.
Arjuna Subject : -
Articles 152 Documents
Supercapactors based on active carbon from spent arabica coffee ground using NaOH activators Rikaryalita Novitra; Hermansyah Aziz; Erman Taer
Journal of Aceh Physics Society Volume 11, Number 1, January 2022
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v11i1.22227

Abstract

Karbon aktif dari ampas biji kopi dimanfaatkan sebagai bahan dasar elektroda superkapasitor. Pembuatan karbon aktif ini diaktivasi dengan NaOH menggunakan gas N2, meliputi variasi konsentrasi 0,2 M, 0,3 M dan 0,4 M. Sifat fisis dari karbon aktif ampas biji kopi robusta telah dilakukan meliputi analisa densitas, penurunan densitas setelah karbonisasi- aktivasi berkisar antara 9% - 35%.Kapasitansi spesifik elektroda karbon ampas biji kopi robusta berdasarkan hasil pengujian menggunakan metode Cyclic voltammetry (CV) diperoleh kapasitansi spesifik tertinggi dengan elektrolit 1 M H2SO4 adalah 130 F/g-1 pada konsentrasi 0,3 M, dan pada pengujian menggunakan metode Galvanostatic charge discharge (GCD) diperoleh kapasitansi spesifik tertinggi dengan elektrolit 1 M H2SO4 adalah 198,53 F/g-1 pada konsentrasi 0,3 M. Luas permukaan spesifik elektroda  0,3 M adalah  739,911 m2 g -1, kandungan unsur elektroda karbon  0,3 M berdasarkan karakterisasi EDX didominasi oleh unsur karbon yaitu 49,37%. Kurva isotherm adsorpsi karbon aktif ampas biji kopi robusta 0,3 M adalah tipe IV yang menunjukkan bahwa struktur mesopore yang mendominan. Dengan nilai kapasitansi dan luas permukaan spesifik yang besar, karbon aktif dari ampas biji kopi robusta bisa dimanfaatkan sebagai elektroda superkapasitor yang murah dan ramah lingkungan.
Petrogenesis of igneous rock in Siron Krueng Area, Kuta Cot Glie District, Aceh Besar Regency, Aceh Province Dewi Sartika; Reza Gunawan; Akmal Muhni; Fahri Adrian
Journal of Aceh Physics Society Volume 11, Number 1, January 2022
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v11i1.21710

Abstract

Desa Siron Krueng merupakan salah satu desa yang berada pada Kecamatan Kuta Cot Glie, Kabupaten Aceh Besar, Provinsi Aceh. Formasi yang terdapat pada lokasi penelitian terdiri dari Formasi Seulimeum (Qtps), Formasi Komplek Indrapuri (Tuic), Formasi Meucampli (Tlm) dan sedikit Formasi Batugamping raba anggota terumbu (Murlr). Metode yang digunakan pada penelitian ini berupa pemetaan geologi dan analisis petrografi (thin section) pada batuan beku. Tujuan penelitian ini yaitu untuk melihat kondisi litologi di lokasi penelitian, dan menginterpretasi sayatan tipis batuan yang berguna untuk melihat kandungan mineral dan untuk mengetahui petrogenesis batuan beku yang terdapat pada lokasi penelitian. Berdasarkan hasil penelitian yang telah dilakukan, litologi yang terdapat pada lokasi penelitian terdiri dari 3 satuan batuan yaitu satuan batupasir tufaan, satuan serpentinit, dan satuan andesit. Pada hasil analisis petrografi, mineral yang terdapat pada batuan beku di lokasi penelitian terdiri dari ; kuarsa, piroksen, hornblende, plagioklas, olivin, opak, dan gelasan. Petrogenesis batuan beku di lokasi penelitian terdiri dari batuan beku intermediet dengan jenis magma pada batuan yang bersifat basa dan termasuk kedalam jenis batuan beku vulkanik, serta batuan beku ultramafik dengan jenis magma pada batuan yang bersifat ultrabasa dan merupakan jenis batuan beku plutonik
Cover Volume 11(1) October 2022 JAcPS JAcPS
Journal of Aceh Physics Society Volume 11, Number 1, January 2022
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The file content of: editorial list, reviewer list, table of content 
Characteristic of microstructure and magnetic properties in LaFeO3 using co-precipitation method Tua Raja Simbolon; Muhammadin Hamid; Martha Rianna; Yoga Pratama; Timbangen Sembiring; Junedi Ginting; Achmad Maulana Soehada Sebayang; Eko Arief Setiadi; Anggito P. Tetuko; Perdamean Sebayang
Journal of Aceh Physics Society Volume 11, Number 2, April 2022
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v11i2.23691

Abstract

Abstrak. Perkembangan penelitian material ferit memiliki karakteristik mikrostruktur dan sifat magnetik yang berbeda-beda. Karakteristik mikrostruktur dan sifat magnetik dari Fe3O4 dan LaFeO3 telah berhasil dilakukan menggunakan metode ko-presipitasi lanthanum klorida dan pasir besi alam digunakan sebagai prekursor untuk preparasi sintesis nanopartikel Fe3O4 LaFeO3. Rasio molar antara lanthanum klorida dan pasir besi alam adalah 1:1, dan tanpa lanthanium. Karakterisasi sampel menggunakan XRD, SEM dan VSM. Hasil XRD menunjukkan bahwa kedua sampel telah memiliki fase tunggal tanpa pengotor kristal seperti La2O3 atau Fe2O3. Hasil morfologi SEM menunjukkan bahwa Fe3O4 dan LaFeO3 memiliki ukuran partikel yang random. Histogram distribusi sebaran partikel untuk kedua sampel ini menunjukkan range 50-300 nm. Sifat magnetik dari sampel Fe3O4 memiliki Ms= 20 emu/g, Mr= 9 emu/g dan H= 400 Oe, sedangkan sifat magnetik LaFeO3 yaitu Ms= 10 emu/g, Mr= 8 emu/g dan H= 410 Oe. Hasil mikrostruktur dan sifat magnetik dalam penelitian ini dapat mendukung dalam pembuatan magnet permanen.  Abstract. The development of research on ferrite materials has different microstructural characteristics and magnetic properties. The microstructural characteristics and properties of Fe3O4 and LaFeO3 have been successfully carried out using the co-precipitation method. Lanthanum chloride and natural iron sand were used as precursors for the preparation of the synthesis of Fe3O4 LaFeO3 nanoparticles. The molar ratio between lanthanum chloride and natural iron sand is 1:1, and without lanthanium. Sample characterization using XRD, SEM and VSM. The XRD results show that the second sample already has a single phase without crystal impurities such as La2O3 or Fe2O3. SEM morphology results show that Fe3O4 and LaFeO3 have random particle sizes. Histograms of particle distribution distribution for these two samples show the range of 50-300 nm. The nature of the sample Fe3O4 has Ms= 20 emu/g, Mr= 9 emu/g and H= 400 Oe, while the specific properties of LaFeO3 are Ms= 10 emu/g, Mr= 8 emu/g and H= 410 Oe. The results of the microstructure and magnetic properties in this study can support the manufacture of permanent magnets
The influence of activator types on the capacitance value of carbon electrodes from coconut shell Heri Rahmat Suryadi; Irmawati Amir; Rustan Ruslan; Nur Afrianah; Al Irsyad; Jasruddin Jasruddin; Abdul Haris
Journal of Aceh Physics Society Volume 11, Number 2, April 2022
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v11i2.23789

Abstract

Abstrak. Penelitian ini bertujuan untuk mengetahui karakteristik karbon aktif dalam aplikasi elektroda karbon dari tempurung kelapa serta pengaruh jenis dari aktivator yang digunakan terhadap kapasitansi elektroda karbon dari tempurung kelapa. Karbon yang telah diperoleh dari tempurung kelapa diproses hingga mencapai ukuran 300 mesh. Karbon tersebut kemudian diaktivasi dengan beberapa aktivator seperti HCl, NaOH dan K2CO3 dengan perbandingan 1:1. Karbon yang telah diaktivasi selanjutnya dikeringkan dengan oven kemudian dilakukan pencucian hingga netral. Karbon aktif kemudian dipelet menjadi elektroda dalam tekanan 8 ton lalu selanjutnya dilakukan pengukuran dimensi dan densitas serta pengujian Cyclic Voltametry. Hasil pengukuran dimensi diperoleh nilai densitas dari CSC, AC1, AC2 dan AC3 masing-masing 0,794 g/cm3, 0,610 g/cm3, 0,649 g/cm3 dan 0,731 g/cm3. Selanjutnya hasil pengujian Cyclic Voltametry diperoleh data kapasitansi spesifik, energi spesifik dan daya spesifik. Nilai kapasitansi spesifik dari CSC, AC1, AC2 dan AC3 adalah masing-masing 0,361011 F/g, 0,33898 F/g, 3,38583 F/g dan 4,461538 F/g. Lalu nilai rapat energi dari CSC, AC1, AC2 dan AC3 adalah masing-masing 0,045126 Wh/kg, 0,042373 Wh/kg, 0,423228 Wh/kg dan 0,557692 Wh/kg. Kemudian nilai rapat daya dari CSC, AC1, AC2 dan AC3 adalah masing-masing 0,216606 W/kg, 0,196721 W/kg, 2,186441 W/kg dan 2,676923 W/kg. Abstract. This study aims to determine the characteristics of activated carbon in the application of carbon electrodes from coconut shells and the influence of the type of activator used on the capacitance of carbon electrodes from the coconut shell. The carbon that has been obtained from the coconut shell is processed up to 300 mesh in size. The carbon is then activated with several activators such as HCl, NaOH and K2CO3 with a ratio of 1:1. Activated carbon is then dried in an oven then washed to neutral. Activated carbon is then pelleted into electrodes under a pressure of 8 tons, which is then tested by Cyclic Voltametry. Activated carbon is then pelleting be electrodes under a pressure of 8 tons and then measurements of dimensions densities and done testing by Cyclic Voltammetry. Dimension measurement results obtained density values from CSC, AC1, AC2 and AC3 are 0,794 g/cm3, 0,610 g/cm3, 0,649 g/cm3 dan 0,731 g/cm3 respectively. Furthermore, the results of the Cyclic Voltametry test obtained data on specific capacitance, specific energy and specific power. Specific capacitance values of CSC, AC1, AC2 and AC3 are respectively 0.361011 F/g, 0.33898 F/g, 3.38583 F/g and 4.461538 F/g. Afterwards the energy density values of CSC, AC1, AC2 and AC3 are respectively 0.045126 Wh/kg, 0.042373 Wh/kg, 0.423228 Wh/kg and 0.557692 Wh/kg. Then the power density values of CSC, AC1, AC2 and AC3 are respectively 0.216606 W/kg, 0.203390 W/kg, 2.031496 W/kg and 2.676923 W/kg.
Study and characterization of Fe3O4 synthesized from natural iron sand in Sumatera Utara Martha Rianna; Muhammadin Hamid; Fitri Handayani; Achmad Maulana Soehada Sebayang; Wina Rahmadani Rangkuti; Marhaposan Situmorang; Timbangen Sembiring; Eko Arief Setiadi; Anggito P. Tetuko; Perdamean Sebayang
Journal of Aceh Physics Society Volume 11, Number 2, April 2022
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v11i2.23492

Abstract

Abstrak. Pasir besi alam adalah satu dari sumberdaya alam di Indonesia, khususnya Sumatera Utara, yang pemanfaatannya belum dilakukan secara optimal. Penelitian ini dilakukan untuk menganalisis kandungan dan ukuran butir Fe yang terdapat di Provinsi Sumatera Utara. Pembuatan sampel pasir besi alam ini menggunakan metode milling basah yang dikeringkan pada suhu 100oC hingga sampel menjadi serbuk. Selanjutnya, proses ekstrasi menggunakan magnet permanen dilakukan pada sampel pasir untuk memisahkan material magnetik dan non magnetik didalamnya. Sampel magnetik yang diperoleh kemudian diuji menggukan alat XRD, SEM-EDX dan VSM. Hasil XRD menunjukkan bahwa sampel pasir besi alam memiliki fasa tunggal yaitu fasa magnetite (Fe3O4), dan struktur kristal kubik spinel yang mana a = b = c = 8.513 Ǻ. Berdasarkan hasil SEM-EDX, terdapat kandungan unsur Fe dan O didalam pasir besi, yang berasal dari fase Magnetit (Fe3O4), maghemite (γ-Fe2O3) dan hematit (α-Fe2O3). Hasil VSM menunjukkan bahwa parameter sifat magnetik saturasi (Ms) sebesar 30.52 emu.g-1, magnetik remanansi (Mr) sebesar 21.66 emu.g-1 dan koersivitas sebesar 455.17 Oe. Hasil studi ini berpotensi dalam pengolahan material magnetik lainnya sehingga dapat ditindaklanjuti dalam pembuatan material berikutnya dalam aplikasi bidang tertentu. Abstract. Natural iron sand includes one of the natural resources in Indonesia, especially in Sumatera Utara which has not been used optimally. The study was done to investigate the content and grain size of Fe found in Sumatera Utara. The manufacture of this natural iron sand sample uses the wet milling method which is dried at 100oC until the sample becomes powder. Next, the extraction process using permanent magnet was performed on the sand sample to separate its magnetic and non-magnetic materials. The iron sand was tested via XRD, SEM-EDX and VSM. The XRD results reveal that the natural iron sand sample has a single phase of magnetite (Fe3O4) phase, and a spinel cubic crystal structure with a = b = c = 8.513 Ǻ. SEM-EDX results show that the iron sand sample consists of Fe and O components, which come from Magnetite (Fe3O4), Maghemite (γ-Fe2O3) and hematite (α-Fe2O3) phases. The VSM results show that the saturation type (Ms) parameter is 30.52 emu.g-1, remanence type (Mr) is 21.66 emu.g-1 and coercivity is 455.17 Oe. The study’s results are potential in other making magnetic materials, so that they can be followed up in the manufacture of subsequent materials in certain applications, respectively.
Laundry waste treatment with photodegradation method using photocatalyst nanoparticle TiO2-SiO2 Abd Mujahid Hamdan; Febrina Arfi; Hilda Risma; Khairun Nisah
Journal of Aceh Physics Society Volume 11, Number 2, April 2022
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v11i2.24924

Abstract

Abstrak. Limbah binatu yang dibuang ke lingkungan tanpa proses pengolahan berpotensi mengganggu ekosistem lingkungan. Metode fotodegradasi mampu menguraikan polutan pencemar dari limbah binatu dengan bantuan cahaya matahari dan katalis. Katalis dalam bentuk nanopartikel dapat membantu dalam metode fotodegradasi. Pada kajian ini digunakan nanopartikel titanium dioksida (TiO2NP) dan nanopartikel silika dioksida (SiO2NP). Tujuan penggunaan katalis untuk membantu dalam proses pendegradasian polutan binatu karena TiO2NP-SiO2NP mempunyai kemampuan menyerap cahaya ultraviolet yang tinggi. Dari penelitian ini diperoleh dengan penambahan TiO2NP-SiO2NP dapat menurunkan polutan limbah binatu 1 liter, dengan massa dan waktu kontak yang optimum yaitu 1 gram TiO2NP-SiO2NP dengan waktu penyinaran selama 7 jam. Parameter limbah yang dianalisis yaitu pH, COD, TSS, fosfat dan kekeruhan. Hasil efektivitas dari uji parameter didapat untuk COD yaitu 96,77 %, TSS yaitu 83,78 %, fosfat yaitu 95,31 %, dan kekeruhan yaitu 97,72 % dan  pH didapat 7,8. Abstract. Waste that is discharged into the environment without a process for managing the environmental ecosystem. The photodegradation method is able to decompose pollutant pollutants from cleaning services with the help of sunlight and catalysts. Catalysts in the form of nanoparticles can help in photodegradation methods. In this study, titanium dioxide (TiO2NP) and silica dioxide (SiO2NP) nanoparticles were used. The purpose of using a catalyst to assist in the degradation process of laundry services is because TiO2NP-SiO2NP has the ability to absorb high ultraviolet light. From this study, it was found that the addition of TiO2NP-SiO2NP can reduce the discovery of 1 liter, with an optimal mass and contact of 1 gram of TiO2NP-SiO2NP with an irradiation time of 7 hours. Waste parameters analyzed were pH, COD, TSS, phosphate, and turbidity. The effective results of the parameter test were obtained for COD, namely 96.77%, TSS for 83.78%, phosphate for 95.31%, and turbidity 97.72% and pH was 7.8. 
Effect of annealing temperature on the microstructure and morphology of BaZr0.45Ti0.55O3 thin films using the sol-gel method Rahmi Dewi; Wahyu Akbar Illahi; Tengku Said Luqman Hussain Shahab
Journal of Aceh Physics Society Volume 11, Number 2, April 2022
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v11i2.22625

Abstract

Abstrak. Ferroelektrik merupakan bahan elektronik khususnya dielektrik yang dapat diaplikasikan sebagai kapasitor. Ferroeletrik mempunyai kemampuan mengubah arah medan listrik internalnya dengan menggunakan medanl istrik yang sesuai. Barium titanat merupakan bahan yang bersifat ferroelektrik yang dapat didoping dengan bahan zirconium dan dapat dibuat dalam bentuk film tipis. Penambahan doping zirconium pada barium titanat akan meningkatkan konstanta dielektrik bahan. Pembuatan film tipis Barium Zirkoniun Titanat dengan komposisi (BaZr0.45Ti0.55O3) telah berhasil dibuat dengan menggunakan metode sol-gel. Variasi suhu annealing yaitu 600oC dan 650oC dengan waktu tahan 1 jam dan dikarakterisasi menggunakan difraksi sinar-X (XRD) dan scanning electron microscopy (SEM). Hasil karakterisasi XRD mendapatkan parameter kisi a = b = 3,97Ȧ danc = 4,25 Ȧ sehingga struktur kristalnya adalah tetragonal. Tingkat kekristalan semakin tinggi dengan bertambahnya suhu annealing yang ditandai dengan meningkatnya intensitas. Karakterisasi SEM menunjukkan pada suhu annealing 600oC ukuran butiran belum terlihat jelas sehingga tidak dapat ditentukan ukuran butirannya. Pada suhu 650oC ukuran butirannya dapat ditentukan dengan nilai ukuran butiran rata-ratanya adalah sekitar 134,5 nm. Abstract. Ferroelectric is an electronic material, the dielectric in particular, which can be applied as a capacitor. Ferroelectric is able to change the direction of its internal electric field by the use of a suitable electric field. Barium Titanate is a ferroelectric material which can be doped with zirconium and made in the form of a thin film. The addition of zirconium doping to Barium Titanate will increase the dielectric constant of the material. The making of Barium Zirconiun Titanate thin film with the composition (BaZr0,45Ti0,55O3) has been successfully prepared using the sol-gel method. The annealing temperature variations are 600oC and 650oC with a 1 hour holding time and characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD characterization results obtain lattice parameters of a = b = 3.97 and c = 4.25 Ȧ, and thereby, the crystal structure is tetragonal. The crystallinity level is highly increasing with increased annealing temperature, indicated by increased intensity. SEM characterization shows that at annealing temperature of 600oC, the grain size is not clearly visible, so the grain size cannot be determined. At a temperature of 650oC, the grain size can be determined with the average grain size of about 134.5 nm.
Petrographic study of rocks in The Julu Rayeu Formation and the Center of the Geureundong Volcanic in Nisam District, North Aceh District, Aceh Province Dewi Sartika; Millati Amalia Sentosa; Fahri Adrian; Akmal Muhni; Dina Gunarsih; Hidayat Syah Putra; Rifqan Rifqan
Journal of Aceh Physics Society Volume 12, Number 2, April 2023
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v12i2.30888

Abstract

Abstrak. Berdasarkan kondiri geologi, Kecamatan Nisam berada pada Formasi Julu Rayeu dan Batuan Pusat Gunungapi Geureundong. Litologi yang terdapat pada Formasi Julu Rayeu terdiri atas endapan sungai, batupasir tufaan, lempung berlignit, sedangkan litologi pada Batuan Pusat Gunungapi Geureundong yaitu Breksi Andesit. Metode yang digunakan pada penelitian ini meliputi metode pemetaan geologi dan analisis petrografi. Penelitian ini bertujuan untuk mengetahui kondisi geologi dan komposisi mineral penyusun batuan pada daerah penelitian. Berdasarkan hasil penelitian yang telah dilakukan diperoleh kondisi geologi yaitu litologi terdiri dari 4 satuan batuan meliputi batupasir, batupasir tufaan, batulempung, dan endapan kolovium. Hasil analisis petrografi pada batuan beku menurut klasifikasi IUGS (1973) terdiri dari 4 sampel yaitu AU12, AU41, AU72 dan AU73 disebut Andesit, sedangkan batupasir berdasarkan klasifikasi Pettijohn (1975) terdiri dari dua sampel yaitu AU32 dan AU62 disebut Lithic Greywacke. Abstract. Based on geological conditions, Nisam District is located in the Julu Rayeu Formation and the center of the Geureundong Volcanic. The lithology found in the Julu Rayeu Formation consists of river deposits, tuffaceous sandstones, and lignite clays, while the lithology of the central rocks of the Geureundong volcano is andesite breccia. The methods used in this study include geological mapping methods and petrographic analysis. This study aims to determine the geological conditions and constituent mineral composition of the rock in the study area. Based on the results of the research that has been carried out, the geological conditions are obtained, namely lithology consisting of 3 rock units including sandstone, tuffaceous sandstone, claystone, and colluvium deposits. The results of petrographic analysis on igneous rocks according to the IUGS classification (1973) consist of 4 samples namely AU12, AU41, AU72, and AU73 called Andesite, while sandstones based on Pettijohn’s classification (1975) consist of two samples namely AU32 and AU62 called Lithic Greywacke.
Analysis of the impact climate anomalies (ENSO and IOD) on environments based of computing in the Western Sumatra Region (Equatorial Region of Indonesia) Melly Ariska; Adam Darmawan; Supari Supari; Muhammad Irfan; Iskhaq Iskandar
Journal of Aceh Physics Society Volume 12, Number 2, April 2023
Publisher : PSI-Aceh

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24815/jacps.v12i2.31167

Abstract

Abstrak. ENSO (El Niño - Southern Oscillation) adalah bentuk anomali iklim di Samudra Pasifik yang ditandai dengan peningkatan suhu permukaan laut (SPL) di bagian Tengah dan Timur khatulistiwa. Fenomena ini memainkan peran penting dalam variasi iklim tahunan dan musiman di Indonesia, terutama di wilayah khatulistiwa Indonesia. Studi ini bertujuan untuk menganalisis dampak anomali iklim komputasi di wilayah khatulistiwa Indonesia. Metode yang digunakan dalam studi ini adalah metode regresi linier dengan membandingkan dua mesin statistik, yaitu bahasa pemrograman Python dan SPSS. Pengaruh ENSO dirasakan di beberapa daerah Indonesia yang ditandai dengan jumlah curah hujan yang lebih rendah selama tahun ENSO dibandingkan dengan sebelum dan sesudah ENSO. Peristiwa El Niño juga mempengaruhi masuknya musim kemarau dan durasinya sepanjang evolusi UNSO. Penurunan jumlah curah hujan berkorelasi negatif dengan peningkatan jumlah kebakaran hutan per tahun. Analisis curah hujan berbasis pembelajaran mesin menggunakan Google Colab dan Python memberikan hasil yang identik dengan analisis berbasis SPSS, sehingga hasil analisis berbasis pembelajaran mesin memiliki nilai yang akurat. Perubahan iklim akan menghasilkan perubahan pola iklim tahunan dan antartahunan seperti penundaan dalam awal musim hujan atau musim kemarau. Selain ENSO, juga terdapat gejala anomali iklim yang dihasilkan oleh interaksi antara laut dan atmosfer di Samudra Hindia di sekitar khatulistiwa, yang disebut IOD (Indian Ocean Dipole). Selain melihat dampak anomali iklim terhadap lingkungan, studi ini juga menguji perbandingan hubungan antara anomali perubahan iklim dan curah hujan menggunakan metode SPSS dan bahasa pemrograman Python dengan membandingkan akurasi output yang dihasilkan secara komputasi. Pengaruh IOD dan ENSO terhadap wilayah tipe hujan ekatorial tidak cukup signifikan. Hubungan antara IOD dan ENSO tidak cukup kuat untuk wilayah khatulistiwa dan tidak terjadi pergeseran pada puncak onset di wilayah ini. Abstract. ENSO (El Niño -Southern Oscillation) is a form of climate deviation in the Pacific Ocean which is characterized by an increase in sea surface temperature (SST) in the Central and Eastern parts of the equator. This phenomenon plays an important role in annual and seasonal climate variations in Indonesia, especially in the equatorial region of Indonesia. This study aimed to analyze the impact of a computational climate anomaly in the equatorial region of Indonesia. The method used in this study was the linear regression method by comparing two statistical engines, namely the Python coding language and SPSS. The influence of ENSO is felt in several areas of Indonesia which are characterized by lower amounts of rainfall during the ENSO year compared to pre- and post-ENSO. El-Niño events also affect the entry of the dry season and its duration throughout the evolution of UNSO. Reducing the amount of annual rainfall is negatively correlated with increasing the number of forest fires per year. Machine learning-based rainfall analysis using google collab and python gives identical results to SPSS-based analysis, so the results of machine learning-based analysis have an accurate value. Climate change will result in changes in annual and interannual climate patterns such as a delay in the start of the rainy season or dry season. In addition, the rainy season period is also expected to be shorter. Apart from ENSO, there are also symptoms of climate deviations produced by the interaction of the sea and the atmosphere in the Indian Ocean around the equator, which is called the IOD (Indian Ocean Dipole). In addition to looking at the impact of climate anomaly on the environment, this study also examines the comparison of the relationship between climate change anomaly and rainfall using the SPSS method and the Python coding language by comparing the accuracy of the computationally generated output. The influence of IOD and ENSO on the rain-type region with the Equatorial rain-type region is not significant enough. The relationship between IOD and ENSO is not strong enough for the equatorial region and there is no shift in the peak onset in this region.