Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Elektrika

Analisa Rugi-Rugi Daya Dan Jatuh Tegangan Pada Saluran Transmisi 150 kV GI Pati Bay GI Jekulo Menggunakan ETAP 12.6.0 Anggoro, Bayu Andik; Utomo, Sukarno Budi; Widihastuti, Ida
Elektrika Vol. 12 No. 2 (2020): Oktober 2020
Publisher : Universitas Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26623/elektrika.v12i2.2828

Abstract

In the electric power system, the transmission system is a pathway to transmit electrical energy from the generator to the substation or from the substation to another substation which allows power losses and large voltage drops if the transmission length is relatively far and the overload is very high. affect the reliability of the transmission system. Analysis of power losses and voltage drop on the 150 KV high voltage transmission system at the Pati substation to the Jekulo substation. The analysis was carried out by conducting a survey at the research location then doing manual calculations and calculations using ETAP 12.6.0 software. The research method used was that the researcher collected voltage and current data at 10.00 and 19.00 WIB in one month and the transmission system supporting equipment specifications to be simulated in ETAP 12.6.0 from Pati and Jekulo substations in order to make comparisons between manual calculations and ETAP. 12.6.0.The conclusion of this study is the calculation of power losses manual calculation and simulation of ETAP 12.6.0 has a difference of 2.5% with the value of manual calculation power losses of 685.5 KW and the power losses from The simulation results reached 266.6 KW and the calculation of the presentation of power losses in the transmission line of GI Pati - GI Jekulo reached 6.8% exceeding the service percentage variation limit due to losses according to SPLN No. 72 of 1987 a maximum of 5% at least -10%.
Analisa Optimasi Photovoltaic(PV) 100 W Menggunakan MPPT dengan Alogaritma Perturb dan Observe Setiyawan, Puji; Utomo, Sukarno Budi; Nugroho, Agus Adhi
Elektrika Vol. 13 No. 1 (2021): April 2021
Publisher : Universitas Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26623/elektrika.v13i1.2984

Abstract

This article reviews the optimization of energy generated by solar panels using MPPT. The need for increased power that can be done using MPPT with the P&O algorithm that goes to the load is proven because of the addition of influencing factors.MPPT A technique for keeping solar panels working. to stay within the Maximum Power point (MPP) area. MPP is a pointor point in the VI curve or VP curve in the solar panel where the solar panel works at maximum efficiency and releasesmaximum power. The P&O algorithm is used to keep the MPPT power out panel always in the MPP area by changing thevoltage value before MPPT and after the MPPT Comparison of the results of modeling with the use of techniques developedand special computer programs that have shown satisfactory results. Through comparison of the output power that comes outof the solar panel using MPPT 16.86406 W and without using MPPT of 13.63239 or experiencing an increase of 23%.