Garuda - Garba Rujukan Digital

Valuation of Ecobricks as an Artificial Resource in Hardscape Materials Rahmadhani Fitri; Hendra Fahruddin Siregar; Ayu Erfiana Asmy
Budapest International Research and Critics Institute (BIRCI-Journal): Humanities and Social Sciences Vol 4, No 3 (2021): Budapest International Research and Critics Institute August
Publisher : Budapest International Research and Critics University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33258/birci.v4i3.2333

The Medan City TPA in the Waterfall Village, Medan Marelan District is the final disposal site for the City of Medan. The composition of the waste at the Waterfall TPA in 2017 consisted of 71.5% organic; Paper 2%; Plastic 10.1%; wood 2%; fabric 2.5% rubber 2.5%; metal 0.6%; glass 0.8%; 1 % chunks; pampers / sanitary napkins 3, 1% and others 3.8% (Department of Hygiene and Parks City Medan). Based on this condition, if waste management efforts are not carried out properly, the service level based on the MDGs (Millineum Development Goals) target of 80% will not be achieved. The composition of plastic waste of 10.1% is quite high. The Ministry of Environment and Forestry (2017) stated that plastic waste increased by 15% from 10% in 2005. The increase will continue in line with the need and use of plastic. Plastic is difficult to decompose, so one thing that can be done is only with 3 R's, namely reuse, reduce and recycle. Reuse by using plastic over and over again, reduce by reducing the use of plastic and recycle by recycling plastic. one of the recycled plastics is with eco-bricks. Ecobricks are a collection of all types of used, clean and dry plastic in used plastic bottles so that they reach a certain density and function as building blocks that can be used over and over again. Ecobrick is a simple solution and simple technology in recycling plastic. Ecobricks can provide direct benefits of Rp. 289,000, - / m2 - Rp. 471.000, - / m2, the price of waste utilization is 57.800-78.500 gr/m2, the price of indirect utilization is Rp. 404,600 – Rp. 549,500 m2

Implementasi Sistem Mitigasi Tsunami dalam Perancangan Fasilitas Pariwisata di Daerah Pesisir untuk Meningkatkan Ketahanan Terhadap Bencana Alam Hendra Fahruddin Siregar; Dara Wisdianti
Jurnal Teknik dan Teknologi Indonesia Vol. 1 No. 2 (2023): September : Jurnal Teknik dan Teknologi Indonesia (JTTI)
Publisher : Arsil Media

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.62287/jtti.v1i2.52

The development of coastal areas as tourist destinations has been a common practice. However, after the 2004 Asia-Pacific Tsunami, several coastal areas lost their function as tourist destinations due to being devastated by the tsunami waves. To reduce the level of destruction and the number of casualties resulting from tsunamis, the design of tsunami-prone coastal areas should be based on a tsunami mitigation system. The tsunami mitigation system varies widely depending on the conditions of the area to be designed and the tsunami hazards it may face. Some of these tsunami mitigation systems not only serve as defenses against tsunamis but also function as coastal city tourist facilities. Thus, they can assist former tsunami-affected coastal areas in revitalizing their function as tourist destinations.

ANALYSIS OF SPATIAL ASPECTS OF MEDAN TELADAN STADIUM RENOVATION Hendra Fahruddin Siregar
Journal of Engineering, Electrical and Informatics Vol 2 No 3 (2022): Oktober: Journal of Engineering, Electrical and Informatics:
Publisher : Pusat Riset dan Inovasi Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/jeei.v2i3.859

Based on the purpose of the Feasibility Study on the Renovation of the Medan City Exemplary Stadium, is to obtain a Foundation for the Planning and Design Program regarding the Renovation of the Exemplary Stadium in Medan City which has supporting facilities and is worthy of national fit. Spatial aspects in the feasibility study of the renovation of the Medan City Exemplary Stadium are adjusted to Regional Regulation No.1 of 2022 of the city of Medan (Regional Spatial Plan 2022 to 2042). The feasibility study of the renovation of the Medan City Exemplary Stadium used quantitative descriptive research, with the data used were primary data and secondary data. The Feasibility Study Method of Exemplary Stadium Renovation Planning to explain the design requirements (design needs) and design determinants related to the planning and design of the Exemplary Football Stadium with the analysis of spatial aspects. The results of this study are reviewed from the aspect of spatial planning, so the concept planned for the renovation of the Exemplary Stadium is feasible to be implemented.

ANALYSIS OF SPATIAL ASPECTS OF MEDAN TELADAN STADIUM RENOVATION Hendra Fahruddin Siregar
Journal of Engineering, Electrical and Informatics Vol. 2 No. 3 (2022): Oktober: Journal of Engineering, Electrical and Informatics:
Publisher : Pusat Riset dan Inovasi Nasional

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55606/jeei.v2i3.859

Based on the purpose of the Feasibility Study on the Renovation of the Medan City Exemplary Stadium, is to obtain a Foundation for the Planning and Design Program regarding the Renovation of the Exemplary Stadium in Medan City which has supporting facilities and is worthy of national fit. Spatial aspects in the feasibility study of the renovation of the Medan City Exemplary Stadium are adjusted to Regional Regulation No.1 of 2022 of the city of Medan (Regional Spatial Plan 2022 to 2042). The feasibility study of the renovation of the Medan City Exemplary Stadium used quantitative descriptive research, with the data used were primary data and secondary data. The Feasibility Study Method of Exemplary Stadium Renovation Planning to explain the design requirements (design needs) and design determinants related to the planning and design of the Exemplary Football Stadium with the analysis of spatial aspects. The results of this study are reviewed from the aspect of spatial planning, so the concept planned for the renovation of the Exemplary Stadium is feasible to be implemented.

Structural Analysis of the Mixed-Use Building of Al-Amin Living Lab and Industrial Park in Sampe Cita Village, Kutalimbaru District Hendra Fahruddin Siregar; Dadang Subarna; Melly Andriana; M. Ali Tami Purba
International Journal of Mechanical, Electrical and Civil Engineering Vol. 1 No. 4 (2024): October : International Journal of Mechanical, Electrical and Civil Engineering
Publisher : Asosiasi Riset Ilmu Teknik Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.61132/ijmecie.v1i4.254

A mixed-use building refers to a combination of several different functions within a single structure, such as residential, office, shopping, and recreational functions built on one site. Designing a mixed-use building requires careful planning and consideration of various factors such as functional needs, aesthetics, and energy conservation. Additionally, the design of mixed-use buildings incorporates various functions within a single area. Floor slabs and beams use plain reinforcing steel with a quality of Fy = 240 MPa (Ø8mm). The concrete cover is taken as 20 mm. From the design results, several thickness types of slabs were obtained according to the load requirements that must be accommodated above them. The following are the moments acting on the floor slabs and beams. The reinforcement calculations are performed using the capacity strength design method according to SNI 2847-2019. The capacity design concept involves controlling the formation of plastic hinges at predetermined locations. The SAP2000 program can directly calculate the feasibility of the structural dimensions and the amount of reinforcement needed from the input program results. In the SAP2000 program, the concrete code used is the American concrete code ACI-318-05/IBC 2003, which differs in some respects from the concrete code in Indonesia SNI 2847-2019. Adjustments need to be made to comply with the regulations in Indonesia. Internal forces from the SAP2000 program are selected from load combinations that generate the maximum moments at the column face. The flexural and shear reinforcement for beams can be directly read from the SAP2000 output in the form of information on the required area of reinforcement.

Implementation Of Health Protocol In Preventing The Spread Of The Covid 19 Virus Rahmadhani Fitri; Hendra Fahruddin Siregar; Adi Sastra Pengalaman Tarigan
International Journal Of Community Service Vol. 1 No. 2 (2021): August 2021 (Indonesia - Malaysia)
Publisher : CV. Inara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51601/ijcs.v1i2.26

Covid-19 is a positive single strain RNA virus that infects the respiratory tract. This virus spreads quickly, the only way is to prevent it. As time progressed, the conditions of transmission became more widespread and took many victims, ranging from adults, teenagers to children. This virus can attack anyone, this virus can also attack children with special needs. Children with special needs are children with special characteristics that are different from children in general without always showing mental, emotional, or physical disabilities. One of them is mental retardation. The more widespread the spread of the COVID-19 virus, the application and knowledge of health protocols must also touch the mentally retarded. This obstacle will affect them to adjust to the implementation of health protocols every day and homework for SLB C Muzdalifah to provide a safe place for students. Prepare students and teaching units in the implementation of New Normal Education. And Educate students so that they apply health protocols at all times. The approach method used in this community service is socialization through posters of health protocols and placement of hand sanitizers. Information on preventing the spread of covid 19 through posters and placing hand sanitisers in the SLB C Muzdalifah area as a reminder and teaching regularity in implementing health protocols. This information is expected to become a habit in the New Normal.

Application of Ecobrick as a Garden Hardscape Material Hendra Fahruddin Siregar; Rahmadhani Fitri
International Journal Of Community Service Vol. 1 No. 2 (2021): August 2021 (Indonesia - Malaysia)
Publisher : CV. Inara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51601/ijcs.v1i2.27

Ecobricks are solid plastic bottles filled with non-biological waste to make reusable building blocks. Eco-bricks is a collaboration-based technology that provides solid waste solutions at no cost to individuals, households, schools and communities. Also known as Bottle Brick or Ecoladrillo. The service method is by conducting an ecobrick workshop then making ecobrick chairs and educating about plastic waste. Ecobricks can be a hardscape material and as an artificial resource. The use of ecobricks is expected to be a change in the use of resources. The production process can be modified to allow the substitution of useless materials to be utilized.

SOSIALISASI KONSEP STRUKTUR BANGUNAN MIXED USE AL-AMIN LIVING LAB DAN INDUSTRIAL PARK DI DESA SAMPE CITA KECAMATAN KUTALIMBARU Hendra Fahruddin Siregar; Dadang Subarna; Melly Andriana; Purba, M. Ali Tami
MARHALADO : Jurnal Pengabdian kepada Masyarakat Vol. 2 No. 2 (2024): Mei: MARHALADO: Jurnal Pengabdian kepada Masyarakat
Publisher : Arsil Media

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.62287/marhalado.v2i2.81

Mixed-use building refers to the combination of several different functions in one building, such as residential, office, shopping and recreational functions built on one site. Designing a mixed-use building structure requires careful planning and considers various factors such as functional needs, aesthetics and energy conservation. In addition, the design of mixed use buildings has various different functions in one area. Floor & Dag Plates Using Plain Reinforcing Steel with Quality Fy = 240mpa (Ø8mm). From the design results, several types of plate thicknesses are obtained according to the workloads that must be accommodated on it. the following are the moments acting on the floor & dag plates. reinforcement calculations are carried out using the capacity design method (capacity strength design) in accordance with SNI 2847-2019. The concept of capacity design in question is to control the formation of plastic joints at predetermined locations. The SAP2000 program can directly calculate the feasibility of structural dimensions and the required reinforcement area from the results of the input program process. In the SAP2000 program, the concrete regulations used are concrete regulations in the United States ACI-318-05/IBC 2003 which in some ways differ from concrete regulations in Indonesia SNI 2847-20219. It is necessary to make adjustments to the regulations that apply in Indonesia. The internal force from the SAP2000 program is selected from the loading combination that produces the field moment and the fulcrum moment at the maximum column face plane. The bending reinforcement and shear reinforcement of the beam can be read directly from the output of the SAP2000 program in the form of information on the required reinforcement area.

Pemberdayaan Usaha Kecil Berdasarkan Pada Potensi Ekonomi Sektor Unggulan Desa Sempe Cita Kecamatan Kutalimbaru Dewi Mahrani Rangkuty; Hendra Fahruddin Siregar; Dian Yulis Wulandari; Ahmad Ramadhan
Amal Ilmiah: Jurnal Pengabdian Kepada Masyarakat Vol. 5 No. 1 (2023): Edisi November 2023
Publisher : FKIP Universitas Halu Oleo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36709/amalilmiah.v5i1.133

Keterbatasan pemahaman masyarakat tentang konsep peluang usaha menjadi kendala dalam pendirian usaha kecil yang dapat menjadi sumber pendapatan tambahan atau pemenuhan kebutuhan ekonomi sehari-hari, hal ini menjadi sebuah tantangan yang serius bagi perekonomian. Kehadiran kegiatan pengabdian kepada masyarakat ini bertujuan untuk Pemberdayaan Usaha Kecil Berdasar Pada Potensi Ekonomi Sektor Unggulan Desa Sampe Cita Kecamatan Kutalimbaru. Agar pelaku usaha kecil masyarakat kecamatan Kutalimbaru mengetahui apa itu peluang usaha dan konsep usaha kecil menjadi target khusus dalam kegiatan ini, bagaimana penerapan dalam usaha kecil rumah tangga pada pendapatan sebagai solusi masalah. Metode pendekatan dilakukan dengan sosialisasi/penyuluhan sekaligus pemberdayaan kelompok usaha kecil rumah tangga desa Sampe Cita. Hasil kegiatan menunjukkan bahwa adanya beberapa sektor peluang usaha yang dapat implementasikan oleh kelompok ibu rumah tangga seperti usaha kecil kuliner, kerajinan dan seni tradisional, jasa transportasi serta jasa konstruksi. Kegiatan PKM ini memiliki potensi untuk meningkatkan produktivitas usaha masyarakat di Desa Sampe Cita. Sebagai rekomendasi dan saran dari tim, dukungan dan peran yang diberikan oleh Aparat Desa, seperti Kepala Desa dan Kepala Dusun, sangatlah penting bagi kelompok-kelompok usaha masyarakat guna meningkatkan produktivitas usaha kecil rumah tangga sebagai sumber tambahan pendapatan bagi masyarakat, yang selanjutnya akan berkontribusi pada kesejahteraan di Desa Sampe Cita.

Sosialisasi Peracangan Kandang Kambing Berbasis GAHP di Desa Sampecita Kecamatan Kutalimbaru Kabupaten Deli Serdang Hendra Fahruddin Siregar; Dara Wisdianti; Purwo Siswoyo; Ida Khairani Siregar
MARHALADO : Jurnal Pengabdian kepada Masyarakat Vol. 1 No. 3 (2023): Agustus: MARHALADO: Jurnal Pengabdian kepada Masyarakat
Publisher : Arsil Media

Show Abstract | Download Original | Original Source | Check in Google Scholar

Al Amin Science and Industrial Park (Living Lab) is an area projected to become a center for field laboratories and workshops that accommodate all study programs at UNPAB. This area is also planned to be an Ecotourism. One of the functions that will be developed in this area is the livestock area. Facing the AEC (ASEAN Economic Community) 2015 in the field of food, especially livestock products in particular, strict standardization is needed so the concept of Good Animal Husbandry Practices (GAHP) needs to be applied. Thus, it is necessary to plan the concept of a livestock drive in the Al Amin Science and Industrial Park (Living Lab) livestock area by considering GAHP (Good Anima Husbandry Practice). The application of GAHP aims to ensure that the livestock products produced are safe for consumption with the right quality and suitable for consumers, while also ensuring that livestock products are produced in the right way without causing harm to the environment, health, safety, and welfare of workers in the livestock sector. The purpose of this research is to produce a design of supporting buildings in the Al Amin Science and Industrial Park (Living Lab) livestock area based on GAHP. The results of this design are expected to be a direction for the development of supporting buildings in the livestock area of the Al Amin Science and Industrial Park (Living Lab)

Title

Found 10 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 10 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 10 Documents
Search