Garuda - Garba Rujukan Digital

Bina Lingkungan Bagi Masyarakat Dusun Pademare Desa Sambik Elen Lombok Utara NTB Sebagai Wujud PKM Bakti Milenial Lolom Evalita Hutabarat; Candra Christianti Purnomo; Putri Rimbun Purba
JURNAL ComunitÃ Servizio : Jurnal Terkait Kegiatan Pengabdian kepada Masyarakat, terkhusus bidang Teknologi, Kewirausahaan dan Sosial Kemasyarakatan Vol. 3 No. 2 (2021): OKTOBER
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM), Univesitas Kristen Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cs.v3i2.3338

Pandemi Covid-19 yang telah berlangsung lebih dari setahun telah berdampak pada seluruh aspek kehidupan masyarakat. Masyarakat dituntut untuk beradaptasi dengan keadaan akibat merebaknya virus yang masuk ke dalam kehidupan masyarakat. Perubahan sosial akibat kebijakan baru yang harus disesuaikan telah menimbulkan masalah baru seperti kurangnya pengunjung atau wisatawan yang datang ke sebagian besar kawasan potensi wisata di Indonesia, termasuk di Desa Pademare Sambik Elen Lombok Utara. Minimnya infrastruktur menjadi kendala utama yang dihadapi beberapa wilayah tersebut, seperti akses jalan yang belum memadai untuk akses menuju lokasi tersebut. Dalam upaya membantu pengembangan desa wisata, berbagai metode dirancang untuk mengajak mahasiswa berbagi pengalaman, mengembangkan inovasi dan ide untuk memberikan solusi berkelanjutan khususnya dalam masalah lingkungan. Perguruan Tinggi sebagai bagian dari civitas akademika berupaya melaksanakan kegiatan pengabdian kepada masyarakat melalui Lembaga Pengabdian kepada Masyarakat setingkat Universitas yang dilakukan oleh dosen sebagai nara sumber bersama dengan mahasiswa yang melakukan sosialisasi di lokasi, sesuai bidang studinya. Kegiatan Pengabdian Masyarakat Milenial bekerjasama dengan Yayasan Indonesia Millenial Connect yang berfokus pada pengelolaan sampah diharapkan dapat menciptakan lingkungan yang berkelanjutan di masa depan.

TINGKAT PEMAHAMAN MASYARAKAT TERHADAP PEMILAHAN SAMPAH RUMAH TANGGA DI DESA PADEMARE LOMBOK UTARA Lolom Evalita Hutabarat; Candra Christianti Purnomo
Jurnal Rekayasa Teknik Sipil dan Lingkungan - CENTECH Vol. 2 No. 2 (2021): OKTOBER ISSN 2722-0230 (Online)
Publisher : UKI Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (936.202 KB)

The problem of household waste often causes environmental pollution. Lack of education to the public about the impact of waste makes residents often underestimate it. The socialization of household waste management by sorting waste with the 3R principle (Reduce, Reuse, Recycle) has been campaigned since 2006. To measure the level of community understanding of this, research was conducted through questionnaires to the community in Pade Mare in Sambik Elen Village, North Lombok. Data analysis is presented in the form of descriptive statistics from the results of a questionnaire consisting of 24 question instruments with 3 indicators, namely waste reduction, waste recycling, and waste processing. The survey results show that the level of community understanding about waste reduction, waste recycling, and waste processing is good with an average score of 76.76; 76.67, and 79.03 respectively. The higher average value of waste processing is in line with the location of the Pade Mare which has many farms so that the processing of animal waste is quite often carried out by the local community. Understanding the importance of sorting waste does not automatically make people take action to sort waste because 91% of respondents still combine all the waste to be disposed of without sorting it out first. For this reason, periodic socialization to the community is needed

ANALISIS RISIKO PEKERJAAN STRUKTUR DENGAN MENGGUNAKAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN DECISION TREE (STUDI KASUS: PROYEK PEMBANGUNAN PUSAT SENI, ART CENTRE GARUT) Candra Christianti Purnomo
Educational Building Jurnal Pendidikan Teknik Bangunan dan Sipil Vol 7, No 2 DES (2021): EDUCATIONAL BUILDING
Publisher : Jurusan Pendidikan Teknik Bangunan Fakultas Teknik Universitas Negeri Medan

Dewasa ini, ketatnya persaingan di industri konstruksi menuntut perusahaan jasa konstruksi untuk melakukan perbaikan secara terus menerus agar performansi dan dapat mencapai target perushaan. Pelaksanaan proyek konstruksi masih dihadapkan pada tiga kendala yaitu biaya, mutu, dan waktu. Apabila permasalahan yang dihadapai perusahaan jasa konstruksi tidak segera diselesaikan maka keberhasilan pelaksanaan proyek tersebut akan terganggu. Selalu terdapat kemungkinan tidak tercapainya keputusan yang diambil, maka dari itu diperlukan kemampuan untuk mengolah dan mempelajari risiko yang ada. Analisis manajemen risiko dalam suatu proyek menjadi penting untuk dilakukan karena diharapkan dapat terwujudnya sasaran proyek yang tepat biaya, tepat mutu, dan tepat waktu. Untuk mengantisipasi terjadinya risiko-risiko tersebut maka penelitian ini akan membahas analisis risiko pada proyek pembangunan Pusat Seni (Art Centre) Garut pada pekerjaan struktur. Tujuan yang hendak dicapai dalam penelitian ini yaitu untuk mengetahui faktor-faktor yang menjadi risiko dari proyek pembangunan Pusat Seni (Art Centre) Garut, dan menenetukan serta menganalisis respon yang paling tepat terhadap risiko tersebut dengan menggunakan metode FMEA dan Decision Tree. Berdasarkan hasil analisis dan pembahasan yang dilakukan dapat disimpulkan bahwa terdapat 26 faktor yang menjadi risiko dari proyek pembangunan Pusat Seni (Art Centre) Garut, berdasarkan analisis risiko kualitatif menggunakan FMEA risiko yang memiliki nilai RPN terbesar adalah produktivitas menurun yang menyebabkan keterlambatan waktu dengan nilai RPN sebesar 60, sedangkan berdasarkan analisis risiko kuantitatif menggunakan decision tree disimpulkan sebaiknya pekerjaan pondasi dimulai pada bulan Agaustus yang memiliki nilai EMV terkecil sebesar –Rp1.382.116.647,24. Jika pada pekerjaan pondasi terjadi keterlambatan waktu maka akan berdampak pada keseluruhan jadwal pada proyek pembangunan Pusat Seni (Art Centre) Garut. Dari analisis risiko-risiko tersebut harus segera dilakukan tindakan yang tepat agar kemungkinan terjadinya kerugian dapat dihindari. Kata Kunci: Analisis Risiko, Decision Tree, FMEA ABSTRACTToday, the tight competition in the construction industry requires construction service companies to make continuous improvementsso that their performance can achieve the company’s targets. The implementation of construction projects is still faced with three obstacles, namely cost, quality, and time. If the problems faced by construction service companies are not immediately resolved, the successful implementation of the project will be disrupted. There is always the possibility of not achieving the decisions taken, therefore it is necessary to have the ability to process and study the risks that exist analysis of risk management in a project becomes important to do because it is expected to realize project goals that are right on cost, right in quality, and on time to anticipate the occurrence of these risks, this study will discuss risk analysis of these risks, this study will discuss risk analysis in the construction project of the Garut Art Center on structural work. The objectives to be achieved in this study are to determine the risk factors of the Garut Art Center development project, and to determine and analyze the most appropriate response to these risks using the FMEA and Decision Tree methods. Based on the results of the analysis and discussion carried out, it can be concluded that there are 26 risk factors for the Garut Art Center development project, based on a qualitative risk analysis using the risk FMEA having the largest RPN value is decreasing productivity which causes time delays with an RPN value of 60, while based on quantitative risk analysis using a decision tree, it is concluded that foundation work should be started in August which has the smallest EMV value of –Rp1.382.116.647,24. If there is a delay in the foundation work, it will have an impact on the overall schedule for the Garut Art Center construction project. Form the analysis of these risks, appropriate action must be taken immediately so that the possibility of loss can be avoided. Keywords: Decision Tree, FMEA, Risk Analysis

Peninjauan dan Pengukuran Eksisting Bangunan Gereja HKBP Ressort Perumnas Klender Sudarno P Tampubolon; Grace Putri Dianty; Candra Christianti Purnomo; Sally Septania Napitupulu
JURNAL ComunitÃ Servizio : Jurnal Terkait Kegiatan Pengabdian kepada Masyarakat, terkhusus bidang Teknologi, Kewirausahaan dan Sosial Kemasyarakatan Vol. 4 No. 1 (2022): APRIL
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM), Univesitas Kristen Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cs.v4i1.3804

Planning/ design of a mature structure is very important in constructing a building. This is one of the goals of the Faculty of Engineering Community Service (PKM) held at the HKBP Resort Church of Perumnas Klender. The activities carried out are measuring and depicting existing church buildings that have stood, where these images can be used by the Church for the development and improvement of the Church in the future. The method used in this PKM is to conduct a field survey to be able to prepare measurements of the church building, then take measurements and draw the initial sketch of the church building on the first and second floors as a whole, until at the end of the activity a 2-dimensional drawing of the church building is carried out according to the measurements that have been made. in the field. This PKM activity produces two-floor dimensional plan builds analyzed by architectural and civil perspectives. Keywords: measurement and drawing; church building, Klender housing estate.

KAJIAN TINGKAT IMPLEMENTASI DAN HAMBATAN PENGGUNAAN BUILDING INFORMATION MODELLING (BIM) Candra Christianti Purnomo; Lolom Evalita Hutabarat; Ruth Putri Wina Gultom
Jurnal Rekayasa Teknik Sipil dan Lingkungan - CENTECH Vol. 3 No. 2 (2022): Jurnal Rekayasa Teknik Sipil dan Lingkungan, OKTOBER ISSN 2722-0230 (Online)
Publisher : UKI Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cen.v3i2.4451

Building Information Modeling (BIM) is essential for the construction sector, especially in Indonesia, because it simplifies challenging tasks, boosts stakeholder participation, and improves overall results. Only state-owned contracting businesses were involved in BIM implementation's adoption and digitization phase in 2017. Since 2015, Singapore has developed and integrated BIM into construction projects, resulting in widespread technology usage. Human resource readiness with technology, preferences for the old system (considered easier to manage and less dangerous), malfunctioning equipment, and a lack of personal motivation are among the factors driving the acceleration of BIM adoption in the Indonesian construction services industry. In optimizing information technologies in the construction sector, each planning element must submit building plans using BIM, including architecture, civil engineering, and electrical engineering. It seeks to boost productivity and collaboration to compete globally with constricted workflows. It is crucial that the Indonesian construction services industry adopt BIM, define implementation standards for BIM, and foster industry cooperation. Building a BIM implementation system in a corporation is challenging since socializing and altering the method and rhythm of work using BIM could take up to two years.

SURVEI DAN TINJAUAN GEOTEKNIK TERHADAP KERUSAKAN BANGUNAN DAN KELONGSORAN PASCA GEMPA CIANJUR 2022 Lolom Evalita Hutabarat; Pinondang Simanjuntak; Efendy Tambunan; Candra Christianti Purnomo; Clijster Annayetty Mamoribo; Goklas Pandaraman Sihombing; Edward Gultom; Adriana Vania
JURNAL ComunitÃ Servizio : Jurnal Terkait Kegiatan Pengabdian kepada Masyarakat, terkhusus bidang Teknologi, Kewirausahaan dan Sosial Kemasyarakatan Vol. 6 No. 1 (2024): APRIL
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM), Univesitas Kristen Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cs.v6i1.5236

An earthquake magnitude of 5.6 on the SR rocked Cianjur Regency, West Java Province, on Monday, 21 November 2022, at 13.21 WIB. The earthquake caused damage to residential buildings and caused landslides in vital and densely populated areas. The fault that occurred on the eastern plateau in Sarampad Village was in the form of a relatively long shift in land. Physical land shifts due to faults can be seen from shifts in Sarampad Village, where the huts in the fields have moved very far from their original position. Likewise, landslides occurred in the horseshoe area of the national road between Cianjur City and Puncak, with the slope of the surrounding landslide being quite steep on the upper slope of the highway and continuing down the slope on the side of the highway leading to the river below the surface of the road. The existence of a river indicates a layer of water close to the surface of the land used by the community and army dormitories near that location. This condition causes the soil to become saturated with water, making it a factor that causes landslides quickly if an earthquake occurs. Landslides on the ridge above the highway have been strengthened with stone gabion reinforcements placed with a terracing system. Meanwhile, the landslides under the highway have not been reinforced. Also, faults that occur on road sections transversely on the road body close to the horseshoe with curved contours need to be handled seriously

SURVEI DAN TINJAUAN GEOTEKNIK TERHADAP KERUSAKAN BANGUNAN DAN KELONGSORAN PASCA GEMPA CIANJUR 2022 Lolom Evalita Hutabarat; Pinondang Simanjuntak; Efendy Tambunan; Candra Christianti Purnomo; Clijster Annayetty Mamoribo; Goklas Pandaraman Sihombing; Edward Gultom; Adriana Vania
JURNAL ComunitÃ Servizio : Jurnal Terkait Kegiatan Pengabdian kepada Masyarakat, terkhusus bidang Teknologi, Kewirausahaan dan Sosial Kemasyarakatan Vol. 6 No. 1 (2024): APRIL
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM), Univesitas Kristen Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cs.v6i1.5236

An earthquake magnitude of 5.6 on the SR rocked Cianjur Regency, West Java Province, on Monday, 21 November 2022, at 13.21 WIB. The earthquake caused damage to residential buildings and caused landslides in vital and densely populated areas. The fault that occurred on the eastern plateau in Sarampad Village was in the form of a relatively long shift in land. Physical land shifts due to faults can be seen from shifts in Sarampad Village, where the huts in the fields have moved very far from their original position. Likewise, landslides occurred in the horseshoe area of the national road between Cianjur City and Puncak, with the slope of the surrounding landslide being quite steep on the upper slope of the highway and continuing down the slope on the side of the highway leading to the river below the surface of the road. The existence of a river indicates a layer of water close to the surface of the land used by the community and army dormitories near that location. This condition causes the soil to become saturated with water, making it a factor that causes landslides quickly if an earthquake occurs. Landslides on the ridge above the highway have been strengthened with stone gabion reinforcements placed with a terracing system. Meanwhile, the landslides under the highway have not been reinforced. Also, faults that occur on road sections transversely on the road body close to the horseshoe with curved contours need to be handled seriously

Desain pengembangan bangunan dan pengecekan struktur Gereja HKBP Ressort Perumnas Klender Tampubolon, Sudarno P; Napitupulu, Sally Septania; Dianty, Grace Putri; Purnomo, Candra Christianti; Kristofel, Andreas Samuel; Indry, Jessica Miracella
ABDIMAS DEWANTARA Vol 7 No 1 (2024)
Publisher : Universitas Sarjanawiyata Tamansiswa

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30738/ad.v7i1.16042

Dalam pengembangan eksisting bangunan Gereja sangatlah dibutuhkan perencanaan/ desain struktur yang matang. Hal ini menjadi dasar dari kegiatan Pengabdian Kepada Masyarakat (PkM) Fakultas Teknik yang di adakan di Gereja HKBP Ressort Perumnas Klender. Adapun tujuan dari kegiatan ini adalah membantu pembuatan gambar as-built drawing 2-D, 3-D, dan pengecekan struktur dalam rangka pengembangan Gereja HKBP Ressort Perumnas Klender, dimana gambar tersebut akan digunakan oleh pihak Gereja untuk pengembangan dan perbaikan Gereja di masa yang akan datang. Metode yang digunakan dalam PkM ini adalah analisis deskriptif. Tim PkM melakukan peninjauan, pengukuran eksisting bangunan di lapangan, menggambarkannya dalam bentuk 2-D dan 3-D, dan pengecekan eksisting struktur gereja (kolom, pelat, balok) yang nantinya digunakan di dalam pengembangan bangunan baru Gereja pada daerah konsistori. Hasil dari PKM ini adalah denah eksisting Gereja dalam bentuk 2-D dan 3-D, serta analisa struktur bangunan dari segi arsitektur dan sipil. Design development of building and structural inspection of HKBP Ressort Perumnas Klender Church Abstract: In developing existing church buildings, careful planning/structural design is very necessary. This is one of the objectives of the Faculty of Engineering's Community Service (PKM) which is held at the HKBP Ressort Perumnas Klender Church. The activities carried out are drawing as-built drawings in 2-D and 3-D and checking the structure in the development plan for the HKBP Ressort Perumnas Klender Church, where the Church can use these drawings for the development and improvement of the Church in the future. The method used in this PKM is to inspect and measure existing buildings in the field, draw floor plans for the 1st and 2nd floors of the church, and then draw plans for the development of the church, as well as 3-D drawings. Apart from that, checks were also carried out on the existing church structures (columns, plates, beams), which would later be used in the development of new church buildings in the church consistory area. The results of this PKM are 2-dimensional and 3-dimensional church development plans as well as an analysis of the building structure from an architectural and civil perspective.

THE EFFECT OF BUILDING INFORMATION MODELLING (BIM) METHOD IMPLEMENTATION ON THE EFFECTIVENES OF BUILDING CONSTRUCTION IMPLEMENTATION MANAGEMMENT IN THE CONSTRUCTION INDUSTRY Immanuel Simon Zevanya Siregar; Pinondang Simanjuntak; Candra Christianti Purnomo
Jurnal Pensil : Pendidikan Teknik Sipil Vol. 13 No. 2 (2024): Jurnal Pensil : Pendidikan Teknik Sipil
Publisher : LPPM Universitas Negeri Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21009/jpensil.v13i2.44243

The aim of this study is to analyze the impact of Building Implementation Information Modeling (BIM) on the efficiency of building construction management quantitatively. It has become a significant method in the construction industry with the potential to improve collaboration, coordination and information management in the implementation of construction projects. The research method uses simple linear regression analysis with data from construction professional respondents. The study involved 52 contractor companies in the construction industry. The selection of these samples is aimed at obtaining representative and adequate data for simple linear regression analysis. With large sample sizes, the results are expected to be more accurate and reliable. In addition, the selection of 52 respondents is also carried out to cover a variety of perspectives and professional experience of construction, making the data obtained more representative, and more reliable for the analysis performed. Implementation of BIM has a significant and positive impact on building construction management, demonstrated by a count t value = 12.217 greater than the table t value of 2.00856. The determination coefficient (R-square) of 0.749 or 74.9% suggests that 74.9 percent variation in building management efficiency can be explained by the implementation of BIM. This finding emphasizes the importance of using BIM to improve management effectiveness in building construction in the construction industry. The implications of this research provide a basis for encouraging the adoption of BIM as an effective tool in the management of construction projects.

ANALISIS RISIKO PEKERJAAN STRUKTUR DENGAN MENGGUNAKAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN DECISION TREE (STUDI KASUS: PROYEK PEMBANGUNAN PUSAT SENI, ART CENTRE GARUT) Candra Christianti Purnomo
Educational Building: Jurnal Pendidikan Teknik Bangunan dan Sipil Vol. 7 No. 2 (2021): Educational Building: Jurnal Pendidikan Teknik Bangunan dan Sipil
Publisher : Jurusan Pendidikan Teknik Bangunan Fakultas Teknik Universitas Negeri Medan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24114/ebjptbs.v7i2 DES.31591

Dewasa ini, ketatnya persaingan di industri konstruksi menuntut perusahaan jasa konstruksi untuk melakukan perbaikan secara terus menerus agar performansi dan dapat mencapai target perushaan. Pelaksanaan proyek konstruksi masih dihadapkan pada tiga kendala yaitu biaya, mutu, dan waktu. Apabila permasalahan yang dihadapai perusahaan jasa konstruksi tidak segera diselesaikan maka keberhasilan pelaksanaan proyek tersebut akan terganggu. Selalu terdapat kemungkinan tidak tercapainya keputusan yang diambil, maka dari itu diperlukan kemampuan untuk mengolah dan mempelajari risiko yang ada. Analisis manajemen risiko dalam suatu proyek menjadi penting untuk dilakukan karena diharapkan dapat terwujudnya sasaran proyek yang tepat biaya, tepat mutu, dan tepat waktu. Untuk mengantisipasi terjadinya risiko-risiko tersebut maka penelitian ini akan membahas analisis risiko pada proyek pembangunan Pusat Seni (Art Centre) Garut pada pekerjaan struktur. Tujuan yang hendak dicapai dalam penelitian ini yaitu untuk mengetahui faktor-faktor yang menjadi risiko dari proyek pembangunan Pusat Seni (Art Centre) Garut, dan menenetukan serta menganalisis respon yang paling tepat terhadap risiko tersebut dengan menggunakan metode FMEA dan Decision Tree. Berdasarkan hasil analisis dan pembahasan yang dilakukan dapat disimpulkan bahwa terdapat 26 faktor yang menjadi risiko dari proyek pembangunan Pusat Seni (Art Centre) Garut, berdasarkan analisis risiko kualitatif menggunakan FMEA risiko yang memiliki nilai RPN terbesar adalah produktivitas menurun yang menyebabkan keterlambatan waktu dengan nilai RPN sebesar 60, sedangkan berdasarkan analisis risiko kuantitatif menggunakan decision tree disimpulkan sebaiknya pekerjaan pondasi dimulai pada bulan Agaustus yang memiliki nilai EMV terkecil sebesar “Rp1.382.116.647,24. Jika pada pekerjaan pondasi terjadi keterlambatan waktu maka akan berdampak pada keseluruhan jadwal pada proyek pembangunan Pusat Seni (Art Centre) Garut. Dari analisis risiko-risiko tersebut harus segera dilakukan tindakan yang tepat agar kemungkinan terjadinya kerugian dapat dihindari. Kata Kunci: Analisis Risiko, Decision Tree, FMEA ABSTRACTToday, the tight competition in the construction industry requires construction service companies to make continuous improvementsso that their performance can achieve the company™s targets. The implementation of construction projects is still faced with three obstacles, namely cost, quality, and time. If the problems faced by construction service companies are not immediately resolved, the successful implementation of the project will be disrupted. There is always the possibility of not achieving the decisions taken, therefore it is necessary to have the ability to process and study the risks that exist analysis of risk management in a project becomes important to do because it is expected to realize project goals that are right on cost, right in quality, and on time to anticipate the occurrence of these risks, this study will discuss risk analysis of these risks, this study will discuss risk analysis in the construction project of the Garut Art Center on structural work. The objectives to be achieved in this study are to determine the risk factors of the Garut Art Center development project, and to determine and analyze the most appropriate response to these risks using the FMEA and Decision Tree methods. Based on the results of the analysis and discussion carried out, it can be concluded that there are 26 risk factors for the Garut Art Center development project, based on a qualitative risk analysis using the risk FMEA having the largest RPN value is decreasing productivity which causes time delays with an RPN value of 60, while based on quantitative risk analysis using a decision tree, it is concluded that foundation work should be started in August which has the smallest EMV value of “Rp1.382.116.647,24. If there is a delay in the foundation work, it will have an impact on the overall schedule for the Garut Art Center construction project. Form the analysis of these risks, appropriate action must be taken immediately so that the possibility of loss can be avoided. Keywords: Decision Tree, FMEA, Risk Analysis

Title

Found 11 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 11 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 11 Documents
Search