Garuda - Garba Rujukan Digital

p-Index From 2021 - 2026

4.033

P-Index

This Author published in this journals

All Journal Paduraksa : Jurnal Teknik Sipil Universitas Warmadewa JOURNAL OF CIVIL ENGINEERING, BUILDING AND TRANSPORTATION BENTANG : Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil Abdimas Dewantara Praxis : Jurnal Sains, Teknologi, Masyarakat dan Jejaring Jurnal Rekayasa Konstruksi Mekanika Sipil Jurnal Pensil : Pendidikan Teknik Sipil Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan Jurnal Abdi Insani Jurnal ComunitA Servizio Jurnal Rekayasa Teknik Sipil dan Lingkungan Asian Journal of Community Services (AJCS) Journal of Infrastructure Planning and Engineering Jurnal Abdimas Maduma

Sudarno P Tampubolon

Teknik Sipil, Universitas Kristen Indonesia (UKI), Jakarta

Author-ID : 2783429

Agriculture, Biological Sciences & Forestry Arts Humanities Biochemistry, Genetics & Molecular Biology Chemical Engineering, Chemistry & Bioengineering Chemistry Civil Engineering, Building, Construction & Architecture Computer Science & IT Decision Sciences, Operations Research & Management Economics, Econometrics & Finance Education Electrical & Electronics Engineering Energy Engineering Environmental Science Health Professions Industrial & Manufacturing Engineering Languange, Linguistic, Communication & Media Law, Crime, Criminology & Criminal Justice Library & Information Science Materials Science & Nanotechnology Mathematics Nursing Public Health Social Sciences Transportation Other

Published : 31 Documents Claim Missing Document

Claim Missing Document

Articles

1 2 3 4

STUDI PERBANDINGAN ANALISA KETELITIAN TINGGI MENGGUNAKAN TOTAL STATION DAN SIPAT DATAR Mulyani, Agnes Sri; Tampubolon, Sudarno
Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan Vol 5, No 2 (2021): Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan
Publisher : Universitas Tarumanagara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24912/jmstkik.v5i2.7540

This research was conducted to analyze and determine the height difference accuracy using the method of measuring the different heights of a closed loop using Waterpass B2 and Total Station Kolida 420SR. The location of research in the Ciloto area, Puncak, West Java with coordinates 107˚ east longitude and 06˚ south latitude, on 14-15 December 2014 using a local high point reference. Measurements were made three times with different looped but the starting and ending points were the same points. Accuracy of calculation is done by calculating the average of the least squares to determine the standard deviation of the measurement results with each equipment. The result is the standard deviation of the height difference with the waterpass is 0.01mm, while with the Total Station it is 0.02 mm. Based on the results of the standard deviation of the height difference, the Total Station can be used for height measurements in civil engineering project that does not require very high accuracy and height difference measurements with the Total Station are more economical because the time required for measurement is a quarter of the time required height difference measurement with Waterpass. Keywords: height measurement; Waterpass; Total station. AbstrakPenelitian ini dilakukan untuk menganalisis dan mengetahui ketelitian beda tinggi menggunakan metode pengukuran beda tinggi suatu ring tertutup menggunakan Waterpass B2 dan Total Station Kolida 420SR. Lokasi penelitian terletak di daerah Ciloto, Puncak Jawa Barat dengan koordinat 107o bujur timur dan 06o lintang selatan, pada tanggal 14 dan 15 Desember 2014 dengan menggunakan referensi titik tinggi lokal. Pengukuran dilakukan tiga kali dengan ring yang berbeda namun titik pangkal dan ujung adalah titik yang sama. Hitungan ketelitian dilakukan dengan hitung perataan kuadrat terkecil untuk mengetahui standar deviasi hasil pengukuran dengan masing-masing alat. Hasilnya adalah standar deviasi beda tinggi dengan waterpass sebesar 0.01mm, sedangkan dengan Total Station sebesar 0.02 mm. Berdasarkan hasil perhitungan nilai standar deviasi pengukuran beda tinggi, maka Total Station dapat digunakan untuk pengukuran beda tinggi pada pekerjaan teknik sipil yang tidak memerlukan ketelitian yang sangat tinggi, dan pengukuran beda tinggi dengan Total Station lebih ekonomis karena waktu yang diperlukan untuk pengukuran adalah seperempat dari waktu yang diperlukan pengukuran beda tinggi dengan Waterpass.

PENERAPAN SISTEM EMULSI MEMBRAN TERHADAP KONTROL AIR TAMBAK DAN SISTEM IJUK TERHADAP PENYEDIAAN AIR BERSIH DI BUMI DIPASENA Nelius Harefa; Setiyadi -; Sudarno Tampubolon; Lamhot Naibaho
JURNAL ComunitÃ Servizio : Jurnal Terkait Kegiatan Pengabdian kepada Masyarakat, terkhusus bidang Teknologi, Kewirausahaan dan Sosial Kemasyarakatan Vol. 1 No. 1 (2019): APRIL
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM), Univesitas Kristen Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cs.v1i1.950

Abstrak Pengabdian kepada masyarakat ini bertujuan untuk meningkatkan pemahaman dan kesadaran masyarakat serta sebagai mediator dalam menyelesaikan masalah penurunan hasil panen udang dan ketersediaan air bersih di Bumi Dipasena. Hasil panen udang masyarakat berada dibawah standar dan sangat jauh berbeda dibanding hasil panen perusahaan. Ketersediaan air bersih mengandalkan air hujan yang memiliki batas waktu layak pakai dan menjadi barang langka dimusim kemarau. Kedua permasalahan tersebut menjadi permasalahan utama dan belum terselesaikan selama bertahun-tahun. Banyak alasan yang menjadi penyebab tidak terselesaikannya masalah, mulai dari biaya, tidak adanya kolaborasi antar masyarakat, dan lain sebagainya. Oleh sebab itu, mereka membutuhkan solusi yang tidak hanya tepat guna namun dapat mengakomodasi kepentingan masyarakat. Maka, alternatif solusi permasalahan penurunan hasil panen udang yang disarankan adalah pengontrolan air tambak udang masyarakat dengan menggunakan sistem emulsi membran dan penyediaan air bersih menggunakan sistem ijuk. Kedua solusi tersebut diyakini dapat terealisasi karena terjangkau dari sisi biaya, sistem kontrol tidak kompleks, dan bahan dasar pembuatan sistem dihasilkan oleh masyarakat sendiri. Alasan tersebut menstimulus masyarakat untuk antusias dalam merespon kedua sistem yang ditawarkan dan menginginkan supaya sistem tersebut direalisasikan. Kata Kunci: Sistem Emulsi Membran; Sistem Ijuk Abstract This community service aims to increase people's understanding and awareness as well as a mediator in resolving the problem of decreasing shrimp yields and the availability of clean water on Bumi Dipasena. Community shrimp yields are below the standard and very much different from the company's harvest. The availability of clean water relies on rainwater which has a time limit for proper use and is a rare item in the dry season. Both of these problems have become major problems and have not been resolved for years. Many reasons are the cause of unresolved problems, starting from costs, the absence of collaboration between communities, and etc. Therefore, they need solutions that are not only effective but can accommodate the interests of the community. So, the alternative solution to the problem of decreasing shrimp yields suggested is the control of community shrimp farm water using a membrane emulsion system and the provision of clean water using a palm fiber system. The two solutions are believed to be realized because they are affordable in terms of costs, the control system is not complex, and the basic material for making the system is produced by the community itself. The reason stimulates the community to be enthusiastic in responding to the two systems offered and wants the system to be realized. Keywords: Membrane Emulsion System, Palm Fiber System

Peningkatan Kesadaran Masyarakat terhadap Kerusakan Bangunan dan Lingkungan Pasca Gempa, Tsunami dan Likuifaksi di Palu Sulawesi Tengah Hutabarat LE; Simanjuntak P; Tampubolon S
JURNAL ComunitÃ Servizio : Jurnal Terkait Kegiatan Pengabdian kepada Masyarakat, terkhusus bidang Teknologi, Kewirausahaan dan Sosial Kemasyarakatan Vol. 1 No. 2 (2019): OKTOBER
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat (LPPM), Univesitas Kristen Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cs.v1i2.1290

Abstrak Kejadian Gempa Palu pada tanggal 28 September 2018 telah menimbulkan korban jiwa dan kerugian besar dengan kerusakan pada infrastruktur dan bangunan di tiga daerah Palu, Sigi dan Donggala. Tragedi ini diakibatkan oleh magnitudo gempa yang sangat kuat M 7.4 diikuti oleh tsunami dan peristiwa likuifaksi yang sangat dahsyat. Karena itulah perlu dilakukan survey berikut assesmen data kerusakan bangunan yang terjadi di Palu sekaligus penyuluhan terkait teknis bangunan rumah tinggal tahan gempa. Sesuai hasil survei, likuifaksi terjadi di tiga lokasi yaitu Petobo, Balaroa dan Sigi. Sedangkan tsunami terjadi di pesisir pantai Donggala akibat terjadinya keruntuhan massa tanah yang besar saat terjadi likuifaksi. Beberapa bangunan dan infrastruktur yang mengalami kerusakan disebabkan oleh sifat teknis bangunan yang tidak mampu menahan beban gempa. Secara umum para warga warga Palu dan Sekitarnya di Sulawesi Tengah belum sepenuhnya memahami konsep bangunan tahan gempa khususnya untuk rumah tinggal sederhana. Kata Kunci: likuifaksi, tsunami, kerusakan bangunan, survei, asessemen Abstract The Palu earthquake on 28 September 2018 caused heavy casualties and losses with damage to infrastructure and buildings in three areas which are Palu, Sigi and Donggala. This tragedy was an impact of a very strong earthquake magnitude 7.4 followed by a tsunami and a very terrible liquefaction. It was necessary to conduct a survey following the assessment of building damage data that occurred in Palu as well as technical assistance to understand the earthquake resistant residential buildings concept. Based on the survey results, liquefaction occurred in three locations namely Petobo, Balaroa and Sigi. While the tsunami occurred on the coast of Donggala due to large land mass collapse during liquefaction. Some buildings and infrastructure that were damaged due to the lack of technical requirement of the earthquake loads resistancy building. In general, the society of Palu and the surrounding areas were not having adequate knowledable for the concept of earthquake resistant buildings, especially for simple residential buildings. Keywords:. liquefaction, tsunami, building damage, surveys, assessments

ANALISA PERBANDINGAN HASIL PENGUJIAN LABORATORIUM DAN SIMULASI PADA BALOK BETON BERTULANG Sudarno P Tampubolon
PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa Vol. 10 No. 1 (2021)
Publisher : Program Studi Teknik Sipil, Fakultas Teknik dan Perencanaan, Universitas Warmadewa

A reinforcement concrete beam behavior is substantial to design structure. Some failures can found in the beam because the beam reinforcement structure does not install like procedure design, this problem made failure for the structure. Knowing the behavior of the beam structure resulting from the load is necessary, as it can help to predict the strength of the structural beam and comfort of the structure being worked on. To find out and predict the strength and comfort of the structure reinforced concrete beam as a result of the load received is the experimental test and simulation. The simulation VecTor2 was used to predict the shear force, crack, and displacement of the reinforced concrete beam when applied to the displacement load. This simulation considered the effect of the bond stress-slip effects of behavior reinforced concrete. Bonds stress-slip (0.139) gives a substantial influence on the strength and hysteretic response of the reinforced concrete beam. That is why this study considers the effect of the bond stress-slip on reinforced concrete. The results of the experiment test and simulations performed, the ratio of load capacity ranges from 1.00-1.095, and the crack pattern forms an angle of 45. All the results of simulation VecTor2 using the bond stress-slip effect would be compared with the result of the experimental test to see the behavior and accuracy of the simulation test.

Analisis Kekuatan Geser Pada Hubungan Balok-Kolom Interior Beton Bertulang Sudarno Tampubolon
JOURNAL OF CIVIL ENGINEERING BUILDING AND TRANSPORTATION Vol 5, No 1 (2021): JCEBT MARET
Publisher : Universitas Medan Area

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31289/jcebt.v5i1.3731

Pertemuan antara balok-kolom pada beton bertulang merupakan bagian dari struktur yang sangat kritis bila terjadi gempa bumi. Hal ini dapat terjadi karena balok-kolom menerima gaya geser yang besar dan sering tidak diberi pendetailan yang baik. Studi analisa ini akan membahas nilai dari kekuatan geser horizontal dari sebelas spesimen pada pertemuan balok-kolom interior dengan mempergunakan metode Softened Strut-and-Tie dan ACI, lalu membandingkannya dengan hasil uji laboratorium yang tersedia di literatur untuk mengetahui keakuratan dari metode yang dipergunakan dalam menentukan nilai dari kekuatan geser. Dari analisa dan verifikasi terhadap sebelas spesimen, metode Softened Strut-and-Tie memberikan hasil yang lebih baik dan mendekati hasil uji laboratorium dibandingkan dengan metode ACI.

PENGARUH KEPEMIMPINAN PROJEK MANAJER DAN KINERJA SUPPLY CHAIN TERHADAP KEBERHASILAN PROYEK KONTRUKSI John fernando silalahi; Pinondang Simanjuntak; Sudarno P Tampubolon
Jurnal Rekayasa Teknik Sipil dan Lingkungan - CENTECH Vol. 3 No. 1 (2022): APRIL ISSN 2722-0230 (Online)
Publisher : UKI Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cen.v3i1.3872

Salah satu faktor, tercapainya keberhasilan proyek dipengaruhi oleh peran projek manajer. Untuk mencapai keberhasilan proyek dibutuhkan projek manajer yang handal, yang mengetahui lingkup tugasnya sebagai pemimpin proyek, serta mengetahui persyaratan kompetensi yang dibutuhkan. Kompetensi seorang projek manajer dapat diukur oleh tiga aspek yaitu Knowledge (pengetahuan), Skill (Keterampilan) dan Attitude (Sikap). Dalam lapangan kerja kepemimpinan yang baik sangat diperlukan didalam jiwa projek manajem yang merupakan seorang pemimpin didalam suatu proyek. Sehingga fondasi awal yang baik untuk mengarahkan suatu proyek dalam keberhasilan dan berkembang lebih baik. Dalam kaitannya projek manajer pada pekerjaan kontruksi memiliki tingkat kerumitan sangat tinggi dalam mengkoordinasi pengadaan peralatan, material dan sumber daya manusia. Keterlibatan banyak pihak maupun individu dalam proses produksi kontruksi secara tidak langsung akan membentuk Supply Chain yang kompleks. Hubungan tersebut akan membentuk suatu hubungan sebagai salah satu mata rantai dalam suatu produksi kontruksi. Pengumpulan data dilakukan memlalui survey menggunakan kuesioner. Sasaran responden dalam penelitian ini adalah orang-orang yang berpengalaman di bidang jasa konstruksi dan bertindak sebagai projek manajer. Pengolahan data dilakukan dalam tiga tahapan, yaitu analisis faktor untuk mereduksi/ meringkas variabel yang berjumlah banyak menjadi beberapa kelompok faktor yang kemudian menjadi variabel bebas yang baru, dilanjutkan ke tahap uji korelasi dengan metode pearson correlation untuk mengetahui korelasi antara variabel bebas dengan variable terkait.

PENGARUH VARIASI AGREGAT KASAR PENYUSUN BETON POROUS TERHADAP KUAT TEKAN DAN POROSITAS BETON Irene Vista Simanjuntak; Sudarno P Tampubolon
Jurnal Rekayasa Teknik Sipil dan Lingkungan - CENTECH Vol. 3 No. 1 (2022): APRIL ISSN 2722-0230 (Online)
Publisher : UKI Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33541/cen.v3i1.3966

The continued use of traditional concrete has resulted in a thicker layer of waterproofing, preventing rainwater from entering the ground and increasing surface run off. As a result, the water table drops during the rainy season, and flooding occurs. One of the innovations to anticipate or overcome these problems is using renewable materials such as aerated concrete. Permeable concrete pavements are intended to reduce puddles on the street. By omitting fine aggregate, porous concrete is simple, lightweight concrete. The interconnected cavities result in a high level of porosity. Porous concrete usually has little to no fine aggregate and enough cement paste to coat the coarse aggregate's surface. Due to the increased porosity, the compressive strength of un-sanded concrete is lower than that of conventional normal concrete. Sand-free concrete has much lower tensile and flexural strength than conventional concrete. In this study, two coarse aggregates with nominal maximum sizes of 12.5 mm and 6.7 mm were used as split rocks with weights of 1.123 kg/m3 and 2.63 kg/m3, respectively. Hence, a FAS of 0.35 and a water volume of 0.35 kg using Portland cement type 1 with a quantity of 389.6 kg/m3. The test object is a concrete cylinder with a diameter of 80 mm and a height of 16 mm. After immersing the specimen in a tub of water, each mixture has three specimens.

Analisa Perilaku Pushover pada Pengujian Balok Beton Bertulang Sudarno P Tampubolon
Bentang : Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil Vol 10 No 1 (2022): BENTANG Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil (Januari 2022)
Publisher : Universitas Islam 45

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33558/bentang.v10i1.3078

Beams are part of the building structure that is important to consider when designing the structure. Some failures that occur in beams due to beam reinforcement are not installed such as planning/ design procedures, this problem can cause structural failure. Knowing the behavior of the beam structure due to the given load can help predict the strength of the structural beam and the comfort of the planned structure. To determine and predict the strength and comfort of the reinforced concrete beam structure due to the received load, experimental and simulation tests are carried out. VecTor2 simulation is used to predict shear, crack, and displacement forces in reinforced concrete beams when displacement loads are applied. The bond stress-slip effect (0.139) has a good effect on the strength and hysterical response of reinforced concrete beams. From the results of pushover testing and simulations, it is obtained that the ratio for load capacity ranges from 1.00-1.095. In addition, the installation of 135˚ hooks on stirrups shows that the crack behavior that occurs forms an angle of 45˚, this indicates that the bond between concrete and reinforcement is going well, this can be seen from the analogous behavior principle of reinforced concrete beams.

Analisis Kerusakan Struktur Bangunan dan Manajemen Bencana Akibat Gempa Bumi, Tsunami, dan Likuifaksi di Palu Sudarno P Tampubolon; I Putu Ellsa Sarassantika; I Wayan Gede Suarjana
Bentang : Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil Vol 10 No 2 (2022): BENTANG Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil (Juli 2022)
Publisher : Universitas Islam 45

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33558/bentang.v10i2.3263

The strong column-weak beam is a design concept that needs to be implemented and considered in the planning of building structures (high-rise and low-rise buildings). Generally, structural failure occurs at beam-column joints. Such failure occurred due to the lack of attention to good and correct design concepts. The detailing of reinforcement for columns, beams, and beam-column connections has not yet fully implemented the SNI-2847-2019 standard which results in the reinforcement cannot withstand the combination of tensile, compressive, and shear forces that occur during an earthquake. In addition, the incomplete design of strong column-weak beam in building planning causes the building to fail in the column structure when receiving axial forces. The purpose of this study was to analyze the structural damage and the disaster management system applied during the earthquake in Palu. The research is carried out by investigation/survey methods on the study area as well as checking and recording the data about damage condition of buildings and conducting a hammer test (non-destructive test) to get the strength value of the concrete. Testing result showed the compressive strength value of the f’c concrete used is 20 to 48 MPa. In addition, the details of stirrups reinforcement are also not fully understood about their function on beams and columns, which results in the installation of stirrup reinforcement does not meet the criteria for bending angles of 90˚, 135˚, 180˚ and the addition of tensile and compressive reinforcement lengths. The high potential for earthquake hazard causes Palu and its surroundings tend to have an earthquake risk. For this reason, it is necessary to implement disaster mitigation for Palu region, which aims to reduce the number of casualties when natural disasters occur, both human and property loses.

Column structure strengthening with FRP (Fiber Reinforced Polymer) due to story addition I Wayan Maesa Andreasnata; I Nengah Sinarta; Ni Komang Armaeni; I. P. Ellsa Sarassantika; Dang Thanh Trung; Cintantya Budi Casita; Roro Sulaksitaningrum; Sudarno P. Tampubolon
Journal of Infrastructure Planning and Engineering (JIPE) Vol. 1 No. 1 (2022)
Publisher : Master Program of Infrastructure and Environmental Engineering, Postgraduate Program, Warmadewa University

This study focuses on strengthening scheme of an existing structure with added story. The addition of a new story increases gravitational loading, which affects the seismic and wind responses of the structure and, as a consequence, the loading combination. To ensure the structure’s capacity requirement, the strengthening scheme uses CFRP (Carbon Fiber Reinforced Polymer). In order to adequately define the structure's performance, a series of structural analyses were performed. The structure's state before and after story addition, subsequently the state after CFRP strengthening, were evaluated. It is demonstrated that the additional story to the structure causes an exceedance in internal forces; however, the strengthening with CFRP is sufficient to withstand these forces, proving that the strengthening scheme is effective and beneficial.

Co-Authors Antonius, Dikky Candra Christianti Purnomo Chatarina Finella Dady Supriadi Dang Thanh Trung David , Charly Deviana Pratiwi Munthe Dianty, Grace Putri Doroti, Doroti Elferida Sormin Fau , Martinus Nifotuho Formas Juitan Lase Fuk Jin Oei Fuk Jin Oei Grace Putri Dianty Gracela P. Tarapandjang Haposan Sahala Raja Sinaga Hutabarat, Lolom Hutagalung, Charly David I Gede Dhana Putra Sanjaya I Nengah Sinarta I Putu Ellsa Sarassantika I Wayan Gede Suarjana I Wayan Maesa Andreasnata I. P. Ellsa Sarassantika Ida Bagus Gede Parama Putra Indry, Jessica Miracella Irene Vista Simanjuntak Iwan B. Santoso John fernando silalahi Kafolapada, Yohan K. Kristofel, Andreas Samuel Lolom Evalita Hutabarat Louisa , Agnes Michel Tambunan Mulyani, Agnes Sri Naibaho, Lamhot Nataldo , Benny Tri Nelius Harefa Ni Komang Armaeni Pane , Medyawanti Pane, Medyawanti Paskalis Halawa Pinondang Simanjuntak Pinondang Simanjuntak Priska Marlen Duakaju Purnomo, Candra Christianti Risma M Simanjuntak Roro Sulaksitaningrum Sally Septania Napitupulu Sally Septania Napitupulu Sari , Desma Setiyadi Setiyadi Setiyadi, Setiyadi Setyadi Setyadi Setyadi Simanjuntak P Simanjuntak, Irene Vista Simanjuntak, Risma M SOPHIAN TALENTA MENDROFA Srimulyani, Agnes Steffy Catharina Rebeccha Simbolon Sudarwani , Margareta Maria Tomaluweng, Zefanya Ulinata Ulinata Ulinata Yonathan, Yonathan Zebua, Prestasi Aswinda

Title

Found 31 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 31 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 31 Documents
Search