Garuda - Garba Rujukan Digital

Designing an Internet of Things Based Automatic Clothesline Irvan A. Salihi; Stephan Adriansyah Hulukati; Steven Humena
Journal of Sustainable Engineering: Proceedings Series Vol 1 No 2 (2019)
Publisher : Fakultas Teknik Universitas Sam Ratulangi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35793/joseps.v1i2.33

In Indonesia, there are 2 seasons, rainy season and dry season. The rainy season occurs from November to March, while the dry season occurs from April to October. With the changing seasons that are very unpredictable, so that the weather cannot be regulated by humans so that it requires the latest technology in this case the internet of things, that concern increases when outside the home and at that time there is no one at home. for fear of clothes that are dried wet with rain water as a result also if clothes that have been dried in the sun and will be exposed to rain water do not rule out the clothes we use will cause a bad odor. By using the mcu node esp 8266 dried is controlled by using a smartphone so that it can be controlled with a long distance then add a rain sensor to anticipate sudden rain fall. If a rain sensor is detected by water, the web system of the relay component will be active and give a command to Nodemcu esp8266, after the program runs the relay will be active and the motor can run forward or backward if the relay is on and the Relay is Off then the motor unable to work forward or backward. Fabric weight is measured by a scale so that it can calculate the weight of the wet cloth obtained. The maximum number of fabrics to be used in this automatic clothesline is to keep the motor running and the motor won't be damaged easily.

RANCANG BANGUN ALAT WUDHU OTOMATIS BERBASIS ARDUINO UNO DI MESJID AL – ICHSAN GORONTALO Stephan Adriansyah Hulukati; Irvan A Salihi
DIELEKTRIKA Vol 2 No 2 (2015): DIELEKTRIKA
Publisher : Jurusan Teknik Elektro Fakultas Teknik Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (540.005 KB)

Mesjid Al – Ichsan Universitas Ichsan Gorontalo merupakan mesjid yang berada di lingkungan akademik sehingga memungkikan untuk dimasukan dalam pengembangan teknologi tepat guna berupa pemanfaatan alat wudhu otomatis. Sistem pengambilan wudhu secara konvensional ini memiliki kelemahannya dimana pemakaian air yang boros karena manusia lupa mematikan kran ataupun kran yang mudah rusak akibat sering di gunakan oleh manuasia. Dengan memanfaatkan alat wudhu otomatis dengan sensor jarak (SRF04) sebagai pendeteksi manusia dalam mengmbil air wudhu dan sistem kontrolnya adalah arduino uno, Arduino ini akan mengirimkan instruksi ke relay untuk mengaktifkan selenoid valve untuk mematikan dan menghidupkan air. Jarak aktif alat ini dimulai pada jarak 3 cm sampai dengan 50 cm dengan konsumsi daya pada saat selenoide valve tidak aktif dengan nilai tegangan : 11,938 volt, Arus : 0,039 Ampere, dan Daya : 0,466 Watt kemudia pada saat selenoide valve aktif dimana tegangan : 11,938 volt, Arus : 0,068 Ampere, dan Daya : 0,816 Watt.

RANCANG BANGUN ALAT WUDHU OTOMATIS BERBASIS ARDUINO UNO DI MESJID AL – ICHSAN GORONTALO Stephan Adriansyah Hulukati; Irvan A Salihi
DIELEKTRIKA Vol 5 No 2 (2018): DIELEKTRIKA
Publisher : Jurusan Teknik Elektro Fakultas Teknik Universitas Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (540.005 KB)

Mesjid Al – Ichsan Universitas Ichsan Gorontalo merupakan mesjid yang berada di lingkungan akademik sehingga memungkikan untuk dimasukan dalam pengembangan teknologi tepat guna berupa pemanfaatan alat wudhu otomatis. Sistem pengambilan wudhu secara konvensional ini memiliki kelemahannya dimana pemakaian air yang boros karena manusia lupa mematikan kran ataupun kran yang mudah rusak akibat sering di gunakan oleh manuasia. Dengan memanfaatkan alat wudhu otomatis dengan sensor jarak (SRF04) sebagai pendeteksi manusia dalam mengmbil air wudhu dan sistem kontrolnya adalah arduino uno, Arduino ini akan mengirimkan instruksi ke relay untuk mengaktifkan selenoid valve untuk mematikan dan menghidupkan air. Jarak aktif alat ini dimulai pada jarak 3 cm sampai dengan 50 cm dengan konsumsi daya pada saat selenoide valve tidak aktif dengan nilai tegangan : 11,938 volt, Arus : 0,039 Ampere, dan Daya : 0,466 Watt kemudia pada saat selenoide valve aktif dimana tegangan : 11,938 volt, Arus : 0,068 Ampere, dan Daya : 0,816 Watt.

Game Petualang Edukasi Bahasa Inggris Pada Anak Sekolah Dasar Nuriman Hamka Genti; Irvan Abraham Salihi; Warid Yunus
Jurnal Cosphi Vol 4, No 2 (2020): Agustus-Desember 2020
Publisher : Teknik Elektro - Universitas Ichsan Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (405.357 KB)

Seiring dengan kebanyakan sekolah dasar masih menerapkan metode pembelajaran menggunakan media buku panduan, begitu pula dengan metode belajar pada Sekolah Dasar Negeri, adapun sekolah-sekolah masih sering menggunakan metode cerama maka dari itu siswa hanya jadi penonton saja, maka, penulis berinisiatif membuat suatu aplikasi game edukasi untuk suatu pembelajaran pada anak-anak dalam bahasa inggris. Kelebihan dari game ini adalah dijalankan dalam keadaan offline dan dapat membuat si anak mudah untuk mengikuti pelajaran tanpa harus menunggu guru dan memotivasi si anak untuk giat belajar mempelajari bahasa inggris. Hasil Penelitian menunjukan bahwa peneliti berhasil membuat sebuah aplikasi yang akan membuat anak-anak sekolah dasar senang ketika belajar dan akan menambah kosa kata bahasa inggris yang mereka ketahui.

Sistem Pengontrol Pintu Otomatis Ruangan Fakultas Ilmu Komputer Berbasis IOT irvan salihi
Jurnal Ilmiah Ilmu Komputer Banthayo Lo Komputer Vol 1 No 1 (2022): Edisi Mei 2022
Publisher : Teknik Informatika Fakultas Ilmu Komputer Universitas Ichsan Gorontalo

Abstract: IoT (Internet of Things) is a technology concept that allows every device to be connected to the internet network. A security system, in general, is to secure an object where the object contains important things security matters such as a house, room, building, or other things. The problem, in general, is that today's doors still utilize conventional locks, which are still less secure because they are easy to break by thieves. The system development method used is a prototype model. The presentation of the hardware aspects to be built will appear to the user quickly. The prototype is evaluated by both parties so that the screening of hardware development needs can be quickly carried out to meet the wishes and needs. This study employs the NodeMcu ESP8266 microcontroller functioned as the main chip that controls all processes occurring. The input from this microcontroller comes from a smartphone that sends values to the NodeMcu ESP8266, which will later be processed. This system has the output of the process carried out by the NodeMcu ESP8266. It is by activating the relay to provide voltage to the solenoid, so the door can be opened and locked. This automatic door control system runs as expected. It is able to open or lock doors that are controlled remotely by the user by giving commands or conditions through the Google Assistant application.

Prediksi Penjualan Tempered Glass Handphone Xiaomi Menggunakan Metode Least Square Fahriansyah Patompo; Irvan Abraham Salihi
Jurnal Ilmiah Ilmu Komputer Banthayo Lo Komputer Vol 1 No 2 (2022): Edisi November (2022)
Publisher : Teknik Informatika Fakultas Ilmu Komputer Universitas Ichsan Gorontalo

ABSTRACT The Amanda Cell store is a Xiaomi handphone tempered glass sales store. So far, the Amanda Cell Store has not been able to predict the ups and downs of Xiaomi cell phone tempered glass sales. This problem affects the ordering process for goods while in fact, some have to wait for sold-out sales. It is a result of the emptiness of tempered glass on other cellphone brands and the cumulation of unsold tempered glass causing some losses. To overcome the problems, an application that can perform a prediction to find out the types of Tempered Glass Xiaomi Mobile is required. The purpose of this study is to find out the results of applying the Least Square Method to predict sales of Tempered Glass for Xiaomi Mobile Phones and to know the level of accuracy of Xiaomi's Tempered Glass sales prediction using the Least Square method. This study results in a conclusion that June 2022 's Prediction is 27,037 and July 2022's prediction is 7,087 Keywords: Sales Prediction, Least Square

Penerapan Metode K-Means Untuk Clustering Penjualan Suku Cadang Kendaraan Viar (Studi Kasus: CV. Gotama Viar Gorontalo) Iftinan Inayah Mohamad; Irvan Abraham Salihi; Kartika Chandra Pelangi
Jurnal Ilmiah Ilmu Komputer Banthayo Lo Komputer Vol 2 No 1 (2023): Edisi Mei 2023
Publisher : Teknik Informatika Fakultas Ilmu Komputer Universitas Ichsan Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37195/balok.v1i2.399

Until now motorcycles are still one of the most widely used means of transportation by Indonesian people. One of the authorized VIAR dealers in Sulawesi is CV Gotama VIAR Gorontalo. The company sells several VIAR-branded motorcycles and some genuine spare parts. There are stock-outs in several types of VIAR vehicle spare parts that are sold because many consumers buy them. There is a stacking of stock of other types of VIAR vehicle spare parts in the warehouse because they are not well sold. It is caused by the company experiencing confusion in determining what types of spare parts are more and less in-demand. The purpose of this study is to group several types of vehicle spare parts that are more and less in demand. The K-Means method is one of the methods in partitional clustering which works in grouping large data by dividing the data into one or more clusters. Based on the results of this study, it can be concluded that the results obtained explain that there are 373 types of goods categorized as more in-demand and 7 types of goods categorized as less in-demand. The system created can obtain a system that can classify spare parts sales data using the K-Means method which is reliable when applied.

Pemanfaatan Tanaman Bambu untuk Membuat Lampu Hias di Desa Bondawuna Kecamatan Suwawa Kabupaten Bone Bolango Irvan Salihi; Zohrahayaty Zohrahayaty; Swastiani Dunggio; Syahrir Abdussamad
ELDIMAS: Jurnal Pengabdian Pada Masyarakat Vol 1 No 1 (2023): Mei - Oktober 2023
Publisher : Electrical Engineering Department Faculty of Engineering State University of Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37905/ejppm.v1i1.4

Community service activities in the form of Thematic Real Work Lectures carried out by Ichsan Gorontalo University students located in Bondawuna Village, Suwawa District, Bone Bolango Regency are one of the activities carried out in this village. This activity program was chosen based on the problems of partners who still lack guidance in utilizing natural resources in the form of bamboo trees which can be processed into decorative lighting products so that they can increase the income of the surrounding community. The method given in this service is partners who are given training and hands-on practice on how to process and make decorative lamps from bamboo. The manufacturing process starts with selecting bamboo trees to be used as decorative lighting products, after which the bamboo is cleaned and then cut and mashed according to the size for the decorative lighting products. After that, the process of installing lights and cables and painting the product. The final result of the assembly obtained is the existence of decorative lighting products made of bamboo material which can be used as decorative lamps for bedrooms and living rooms that look minimalist

Sistem Kendali Pemberian Pakan Ayam Broiler Otomatis Berbasis Mikrokontroler Tongkonoo, Agustian; Salihi, Irvan Abraham; Taliki, Sunarto
Jurnal Ilmiah Ilmu Komputer Banthayo Lo Komputer Vol 2 No 2 (2023): November 2023
Publisher : Teknik Informatika Fakultas Ilmu Komputer Universitas Ichsan Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37195/balok.v2i2.180

ABSTRACT ; A control system is a system that produces a certain value as its output through controlling or changing the provisions of the system input. Feeding is an important element in determining the level of broiler production. Likewise, there is one farmer in Bilungala Village, Bone Pantai Subdistrict producing broiler chickens. Feeding chickens can be made easier by using a mechanical device controlled by equipment. This system uses a microcontroller connected to an Arduino and a timer for feeding chickens with a Real-Time Clock (RTC). This automatic tool has two parts, namely, the main container serves as a place to store food reserves and the second container as a place to feed the chickens. The Real-Time Clock functions to regulate the feeding hours of broilers. A Solenoid Valve functions as a faucet for feeding the broilers carried out from 07.00 through 17.00. It is for the morning, noon, and evening feedings regulated by the Real-Time Clock (RTC).Keywords: control system, chicken feeding, automatic, RTC (Real Time Clock), Solenoid Valve

Internet of Things (IoT) dalam Estuarine Ecosystem: Kajian Bibliometrik Abraham Salihi, Irvan; Lihawa, Fitryane; Hasim; Wahyuni K Baderan, Dewi; Mahmud, Marike
Jurnal Biogenerasi Vol. 9 No. 1 (2024): Terbit volume 9 nomor 1 tahun 2024
Publisher : Universitas Cokroaminoto Palopo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30605/biogenerasi.v9i1.3661

Studi ini bertujuan untuk menganalisis dan menyelidiki literatur ilmiah terkait penerapan Internet of Things (IoT) dalam konteks ekosistem estuaria. Ekosistem estuaria adalah lingkungan yang kompleks dan penting, sering menjadi fokus upaya konservasi dan pengelolaan lingkungan. Dengan kemajuan teknologi IoT, ada potensi besar untuk memantau, mengelola, dan melindungi ekosistem estuaria dengan lebih efektif. Penelitian ini menyajikan hasil dari studi bibliometrik terhadap 500 judul dengan kata kunci Internet of Things Estuarine Ecosystem dalam sistem pencarian menggunakan Publish or Perish (PoP) dan VOS Viewer, menghasilkan tren penelitian, topik utama, dan kesenjangan pengetahuan yang dapat memandu peneliti yang tertarik dalam bidang IoT. Tren penelitian terkait kata kunci Internet of Things Estuarine Ecosystem diidentifikasi dalam 5 (lima) kata kunci tren penelitian: prediksi, deep learning, laguna, sensor, teknologi, dan informasi, yang diharapkan dapat merangsang diskusi dan inovasi lebih lanjut dalam penerapan IoT untuk menjaga keberlanjutan ekosistem estuaria. Kata kunci : Internet of Things (IoT), ekosistem estuaria, studi bibliometrik.

Title

Found 14 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 14 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 14 Documents
Search