Claim Missing Document
Check
Articles

Found 3 Documents
Search
Journal : Jurnal Polimesin

Optimization of electroplating thickness results for SS400 steel using the Taguchi method Ahmad Adib Rosyadi; Firman Gustiawan; Mahros Darsin; Yuni Hermawan; Mochamad Asrofi
Jurnal POLIMESIN Vol 20, No 2 (2022): August
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jpl.v20i2.2860

Abstract

SS400 steel is steel with a low carbon content (max 0.17 %C) or low carbon steel. SS400 applications are widely used in the construction industry, railway industry, bridges and others. The use of SS400 which is in direct contact with the surrounding environment will cause the appearance, quality, and usefulness of the material or material to decrease. One way to prevent and improve metal performance is electroplating. This study used SS400 carbon steel with chrome coating. The parameters in this study are a voltage of 3, 6, and 9 Volts; the temperature of 45, 50, and 55 oC; and the time of 20, 25, and 30 minutes. The Taguchi method L9(33) was used to design the experiments. Analysis of variance (ANOVA) shows that factors of chroming time, voltage, and temperature contribute to coating thickness at the level of 40.615%; 24.951%; and 10.369%, respectively. The maximum thickness of 47.340 µm could be achieved when using combination factors of plating time of 30 minutes, at 9 Volts, and keeping the temperature of the solution at 50 oC.
A study on Flame Characteristics Premixed Burning by Giving Magnetic Field Induction Deny tomy andrianto; Muh. Nurkoyim Kustanto; Yuni Hermawan; Nasrul Ilminnafik; Salahuddin Junus
Jurnal POLIMESIN Vol 21, No 2 (2023): April
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jpl.v21i2.3497

Abstract

This study aims to compare the effect of magnetic field induction on the characteristics of the fire resulting from the combustion of premixed biodiesel calophyllum inophyllum . Further research on premixed combustion flames due to magnetic field induction. As time goes by, petroleum is currently running low, therefore alternative biofuels are needed. One type of non-food vegetable oil is Jatropha and calophyllum inophyllum  oil, besides not being consumed, it can be processed into biodiesel as fuel. To get a more effective and efficient flame, you can apply a magnetic field effect to the fire, especially in terms of the burning rate of the fire. The experimental research method is to heat calophyllum inophyllum biodiesel until it is in the form of steam, then flow it to the burner which will then be given air which is controlled by the flow mass. Then the fire is ignited and the mass of the air flow is increased until the fire is lifted until it is extinguished. Two magnets are placed between the burners by varying the direction of the magnetic field N-S, N-N and the results of this study are the shape of the flame. The resulting fire is more transparent, clearer and more visible. The direction of the N-S magnetic field causes the temperature to be higher than the direction of the N-N magnetic field. The high and low of the flame is affected by the direction of the magnetic field, the stronger the N-S magnetic field. The magnetic field can affect the burning speed of the biodiesel flame. In a poor mixture (ϕ 1) in the presence of magnetic influence, the rate of fire is lower without the influence of a magnetic field, but in a rich mixture (ϕ 1) in the presence of a magnetic influence, the rate of fire is higher than without the influence of a magnetic field. This is due to the magnetic influence that induces oxygen. Oxygen is paramagnetic, so it can be attracted by magnetic fields.
Mechanical properties of FDM 3D printed component using self-made PLA-titanium filament: hardness perspective Mahros Darsin; Faris Ahmad Junaedi; Agus Triono; Yuni Hermawan; Intan Hardiatama; R. Koekoeh Koenjtoro Wibowo; Hari Arbiantara Basuki
Jurnal Polimesin Vol 22, No 2 (2024): April
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/jpl.v22i2.4118

Abstract

3D printing, also known as additive layer manufacturing, is a technique that creates three-dimensional objects or any shape from a digital model. It works by building objects layer-by-layer, similar to how a laser printer operates. Fused Deposition Modeling (FDM) is a widely used technique in 3D printing because it is easy to use, cost-effective in production, and environmentally friendly. This study focuses on a self-made filament made of a PLA-titanium mixture. PLA is a biodegradable thermoplastic polymer sourced from plants, whereas titanium is a strong, lightweight, and corrosion-resistant metal. To measure the hardness of different materials, there are several methods available. In this study, the Shore D hardness test, specifically designed for polymer materials, was used. Data were collected using the Taguchi method, specifically L4 (23), and the data were analysedusingAnalysis of Variance (ANOVA). The variations in print parameters examined in this study include nozzle temperature (230°C and 240°C), layer height (0.2 mm and 0.3 mm), and print speed (30 mm/s and 40 mm/s). The aim of this study was to determine whether there were any changes in the hardness of the specimens. The ANOVA results revealed that the most influential parameter was print speed, with a contribution value of 56.01%. The results demonstrated that the printing parameters affected the hardness of the printed specimens. The highest hardness level of 56.3 Shore D was obtained with a nozzle temperature of 240°C, a layer height of 0.3 mm, and a print speed of 30 mm/s. The application of this study was demonstrated through the creation of dentures made from PLA-titanium.