Claim Missing Document
Check
Articles

Found 21 Documents
Search

SINTESIS NANOPARTIKEL PERAK DAN UJI AKTIVITASNYA TERHADAP BAKTERI E. coli DAN S. aureus Wahyudi, Tatang; Sugiyana, Doni; Helmy, Qomarudin
Arena Tekstil Vol 26, No 1 (2011)
Publisher : Arena Tekstil

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (813.881 KB)

Abstract

Pada penelitian ini dipelajari sintesis nanopartikel perak dan uji aktivitasnya sebagai anti-mikroba terhadapEscherichia coli dan Staphylococcus aureus. Nanopartikel perak disintesis melalui pembentukan larutan koloidperak dengan metode reduksi perak nitrat dengan zat pereduksi natrium borohidrida. Performa hasil sintesis larutankoloid nanopartikel perak dalam menghambat pertumbuhan mikroba dievaluasi melalui uji aktivitas terhadapEscherichia coli dan Staphylococcus aureus. Pada perbandingan molar NaBH4/AgNO3 = 1,2 dan perbandinganberat Ag/asam poli akrilat (PAA) = 10,7, diperoleh diameter rata-rata nanopartikel perak sebesar 71,8 nm dengannilai polydispersity index (PI) sebesar 0,293. Hasil sintesis larutan koloid nanopartikel memperlihatkan kemampuandalam menghambat pertumbuhan bakteri, dan daya hambat terhadap Staphylococcus aureus ditemukan 30% lebihkuat dibanding terhadap bakteri Escherichia coli. Hasil uji aktivitas antimikroba secara kuantitatif menunjukkanbahwa persentase reduksi bakteri dapat mencapai hingga lebih dari 99%.
PRODUKSI DAN KARAKTERISASI GUM XANTHAN DARI AMPAS TAHU SEBAGAI PENGENTAL PADA PROSES TEKSTIL Gustiani, Srie; Helmy, Qomarudin; Kasipah, Cica; Novarini, Eva
Arena Tekstil Vol 32, No 2 (2017)
Publisher : Arena Tekstil

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (378.378 KB)

Abstract

Pada proses pencapan tekstil diperlukan zat pembantu berupa pengental untuk menghantarkan warna pada kain. Beberapa pengental alam dapat digunakan untuk proses pencapan tersebut salah satu diantaranya adalan gum xanthan. Gum xanthan dapat diperoleh dari aktivitas mikroorganisme dengan diberikan nutrisi yang mencukupi untuk pertumbuhannya, seperti sumber karbon dan nitrogen. Sumber karbon dapat diperoleh dari ampas tahu sisa dari kegiatan industri pembuatan tahu. Pada penelitian ini, digunakan ampas tahu sisa dari proses pembuatan tahu di industri tahu rumahan, sebagai substrat dalam produksi gum xanthan oleh bakteri Xanthomonas campestris. Gum xanthan yang dihasilkan dicoba sebagai pengental pada proses tekstil dengan melihat sifat-sifat dari pengental diantaranya viskositas, dilihat gugus-gugus fungsional gum xanthan dengan analisis FTIR, melihat morfologi gum xanthan serbuk menggunakan SEM, kadar air, kadar abu, derajat putih dan kekakuan kain. Hasil dari Penelitian ini diperoleh gum xanthan sebanyak 35 g/L pada kondisi konsentrasi tepung ampas tahu sebanyak 2% (b/v), penambahan sukrosa 1% (b/v), volume kultur bakteri Xanthomonas campestris sebanyak 20% (v/v) dan proses fermentasi yang dilakukan selama 5 hari. Dari hasil tersebut membuktikan bahwa bakteri Xanthomonas campestris mampu mengkonversi gula menjadi gum xanthan maksimal sebesar 87,5%. Dari hasil karaktisasi derajat putih dan kekakuan kain, gum xanthan dari tepung ampas tahu dapat digunakan sebagai pengental pada proses tekstil baik untuk serat sintetis maupun serat alam.
DEGRADASI SURFAKTAN SODIUM LAURYL SULFAT DENGAN PROSES FOTOKATALISIS MENGGUNAKAN NANO PARTIKEL ZNO Maretta, Aldila; Helmy, Qomarudin
Jurnal Teknik Lingkungan Vol 21, No 1 (2015)
Publisher : ITB Journal Publisher, LPPM ITB

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/jtl.2015.21.1.1

Abstract

Abstrak: Sodium lauryl sulfat (SLS) merupakan salah satu surfaktan anionik yang terkandung di dalam sabun, shampo, deterjen, dan bahan pembersih lainnya. Penggunaan surfaktan SLS dalam aktivitas sehari ? hari menghasilkan limbah yang mengandung surfaktan SLS yang selanjutnya akan masuk ke dalam lingkungan. Keberadaan SLS pada lingkungan perairan dapat menggangu ekosistem seperti busa yang ditimbulkan dapat menurunkan konsentrasi oksigen terlarut dan dapat mengganggu perkembangbiakan organisme perairan. Diperlukan suatu teknologi pengolahan limbah yang mengandung surfaktan untuk mencegah efek buruk terhadap lingkungan. Fotokatalisis merupakan salah satu solusi dalam mengolah limbah yang mengandung surfaktan khususnya SLS. Tujuan dari penelitian ini untuk menentukan kondisi optimum pada proses fotokatalisis dalam mendegradasi senyawa SLS. Proses fotokatalisis dilakukan menggunakan sinar UV-C dengan panjang gelombang 200 ? 280 nm dan fotokatalis nano partikel ZnO. Fotokatalis nano partikel ZnO dibuat melalui proses presipitasi dan dilakukan analisis SEM yang menunjukan bahwa fotokatalis ZnO memiliki ukuran partikel yang termasuk dalam skala nano partikel. Kondisi optimum proses fotokatalisis didapat melalui percobaan menggunakan sebuah reaktor batch. Percobaan dilakukan dengan melakukan tiga jenis variasi percobaan yaitu variasi konsentrasi nano partikel ZnO sebesar 0,05, 0,1, 0,2, 0,4, dan 0,8 g. l?1, variasi pH sebesar 3, 5, 7, 9, dan 11, dan variasi proses yaitu menggunakan nano partikel ZnO saja, nano partikel ZnO dan sinar UV, sinar UV saja, dan tanpa menggunakan fotokatalis nano partikel ZnO maupun sinar UV. Hasil percobaan yang didapat menunjukkan bahwa kondisi optimum proses fotokatalisis yaitu menggunakan fotokatalisis nano partikel ZnO dan sinar UV dengan konsentrasi nano partikel ZnO sebesar 0,4 g. l?1, dan pada pH 9. Kata kunci: surfaktan, sodium lauryl sulfat (SLS), fotokatalisis, sinar UV, nano partikel ZnO, pH. Abstract: Sodium Lauryl Sulfat (SLS) is one of anionic surfactant which is contained in soap, shampoo, detergent, and other cleansers. Using SLS surfactant in daily activities produces wastewater which contains SLS surfactant that will be go into the environment. The presence of SLS surfactant in the water environment can disupt ecosystems such as reducing the dissolved oxygen by the presence of foam and can disrupt organisms breeding. A SLS surfactant wastewater treatment technology is needed to avoid the bad effect to the enviroment. Photocatalytic is one of solution to treat wastewater which contains surfactant especially SLS. The objective of this research is to determine the optimum conditions of photocatalytic process for SLS surfactant degradation. Photocatalytic process has done using UV-C ray with wavelength in range 200 ? 280 nm and ZnO nano particle as the photocatalyst. ZnO nano particle photocatalyst was made by precipitation process and the SEM anaysis has been done to show that the ZnO photocatalyst has particle size in nano particle scale. The optimum condition of photocatalytic process was obtained by experiment using a batch reactor. The experiment has been done by doing three kind of variations, that are Zno nano particle concentration variations as 0,05, 0,1, 0,2, 0,4, and 0,8 g. ?1, pH variations as 3, 5, 7, 9, amd 11, and process variations as just using ZnO nano particle, using ZnO nano particle and UV ray at the same time, just using UV ray, and without ZnO nano particle photocatalyst and UV ray. The result of the experiments show that the optimum condition of photocatalytic process is using ZnO nano particle photocatalysist and UV ray at the same time with ZnO nano particle concentration as 0,4 g. ?1at pH 9. Keywords: surfactant, sodium lauryl sulfate (SLS), Photocatalytic, UV ray, ZnO nano particle, pH.
Removal Of Color and Chemical Oxygen Demand From Textile Wastewater Using Advanced Oxydation Process (AOPs) Helmy, Qomarudin; Notodarmojo, Suprihanto; A. Aruan, Indah; Apriliawati, Rizki
IPTEK Journal of Proceedings Series No 6 (2017): The 3rd International Conference on Civil Engineering Research (ICCER) 2017
Publisher : Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (519.583 KB) | DOI: 10.12962/j23546026.y2017i6.3292

Abstract

Large quantities of dyes used in the textile industry are lost to the effluents and flows into surface water during the manufacturing and processing operations. Many methods have been used such as biological, physical and chemical treatment of dye containing wastewater. Among these treatment technique, activated sludge, flocculation, and adsorption are the most commonly applied methods in Indonesia. Dyes are usually resistant to aerobic degradation, for example decolorization of azo dyes has been found to be less effective solely using this treatment. On the other hand, flocculation and adsorption methods are not destructive, mainly just concentrate and separate the pollutants phases. This research paper investigates the removal of color and chemical oxygen demand/COD from textile wastewater using advanced oxydation process either by ozone-UV and zinc oxide photocatalyst. Effects of various variables on decolorization and COD removal process have been investigated. The results showed that ozone/UV could achived a complete decolorization (100% removal) when 40 mg/l dye initial concentration was treated with 170.43 ppm/min ozonation for 120 min of incubation period. The same color removal efficiency also achieved when 20 mg/l dye initial concentration treated in the photocatalytic reactor contained 0.71 mg/cm2 of ZnO nanoparticle after 135 min of incubation period. COD removal efficiency for ozone/UV and ZnO photocatalytic treatment was 60% and 77%, respectively.
IMOBILISASI KULTUR CAMPURAN MIKROBA DAN KARAKTERISTIK AKTIFITASNYA DALAM MENURUNKAN ORGANIK DAN AMONIAK PADA LIMBAH CAIR DOMESTIK Kardena, Edwan; Prabowo, Himawan G; Helmy, Qomarudin
Jurnal Teknik Lingkungan Vol 26, No 1 (2020)
Publisher : ITB Journal Publisher, LPPM ITB

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5614/j.tl.2020.26.1.5

Abstract

Abstrak. Air limbah domestik yang mengandung senyawa organik dapat berpotensi mencemari lingkungan dan menyebabkan eutrofikasi bila tidak diolah. Salah satu upaya untuk mengurangi kandungan organik dari air limbah adalah dengan menggunakan IPAL yang memanfaatkan proses biologi. Proses biologi dinilai baik karena kandungan organik dari air limbah dapat berguna untuk pertumbuhan mikroba, operasionalnya murah, dan tidak menghasilkan produk sampingan yang berbahaya. Teknologi pengolahan air limbah secara konvensional umunya menggunakan prinsip pertumbuhan mikroba tersuspensi, adapun perkembangan teknologi pengolahan dewasa ini mengarah pada prinsip pertumbuhan mikroba terlekat, termasuk diantaranya adalah teknologi imobilisasi mikroba. Penggunaan mikroba terimobilisasi ini dinilai memiliki kelebihan yaitu konsentrasi selnya yang tinggi dan mampu berinteraksi dengan lingkungan ekstrim. Pada penelitian ini dibuat imobilisasi mikroba dengan tujuan untuk menurunkan kadar organik dari air limbah domestik, dengan 3 macam variasi penggunaan mikroba terimobilisasi sebanyak 3 g, 6 g, dan 9 g. Hasil penelitian menunjukkan bahwa reaktor dengan mikroba sebanyak 3 g, 6 g, dan 9 g mampu menurunkan kandungan organik COD dengan efisiensi sebesar 81,3%, 87,5%, dan 87,5%; BOD sebesar 83,96%, 93,75%, dan 93,34%; dan amonia sebesar 71,14%, 75,31%, dan 78,29%. Mikroba campuran yang terjerat dalam matriks alginate serta lama penyimpanan matriks tidak berpengaruh nyata terhadap jumlah dan viabilitas sel mikroba. Kata kunci: alginat, imobilisasi, kultur campuran, limbah domestic, senyawa organik  Abstract. Domestic wastewater that contains organic compounds can potentially pollute the environment and cause eutrophication if not treated. One effort to reduce the organic content of wastewater is to use WWTP which utilizes biological processes. Biological processes are considered good because the organic content of wastewater can be useful for microbial growth, is inexpensive and does not produce harmful byproducts. Conventional wastewater treatment technology generally uses the principle of suspended microbial growth, while the development of treatment technology today leads to the principle of embedded microbial growth, including microbial immobilization technology. The use of immobilized microbes is considered to have advantages, namely high cell concentration and being able to interact with extreme environments. In this study microbial immobilisation was made with the aim of reducing organic content from domestic wastewater, with 3 variations of the use of immobilized microbes of 3 g, 6 g, and 9 g. The results showed that reactors with microbes of 3 g, 6 g and 9 g were able to reduce the organic content of COD with efficiencies of 81.3%, 87.5%, and 87.5%; BOD of 83.96%, 93.75% and 93.34%; and ammonia at 71.14%, 75.31% and 78.29%. Mixed microbes that are trapped in the alginate matrix and the length of storage of the matrix have no significant effect on the number and viability of microbial cells. Keywords: Alginate, domestic wastewater, immobilization, mixed culture, organic compound
Kinerja Microbial Fuel Cell dengan Variasi Hambatan Eksternal dalam Menghasilkan Energi Listrik dan Menyisihkan Senyawa Organik pada Limbah Cair Hidayat, Syarif; Aghnia, Dini Widyani; Kardena, Edwan; Helmy, Qomarudin
Jurnal Presipitasi : Media Komunikasi dan Pengembangan Teknik Lingkungan Vol 17, No 3 (2020): November 2020
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (800.985 KB) | DOI: 10.14710/presipitasi.v17i3.223-232

Abstract

wastewater into direct electrical energy. In this study, the applied external resistance in the MFC reactor was optimized to determine its optimum conditions in generating electrical energy and removing organic compounds in wastewater. The MFC reactor's performance was evaluated by cell potential, power density, Coulombic efficiency (CE), and organic removal efficiency. The purpose of measuring these parameters is to determine the MFC reactor's performance in producing electrical energy and removing organic compounds for each experiment variation. Biochemical tests were carried out to choose the type of microorganisms in the anode electrode. This measurement is essential for the optimization of environmental conditions for subsequent experiments. MFC reactor with 100 Ω was selected as an optimum condition since it produced the highest power density and efficiency organic removal. In this condition, the CE value was 57%, slightly lower than the MFC reactor with an external resistance of 50 Ω, 65%. Based on biochemical tests, microorganisms that grow on the anode electrode were closed to the Clostridium (Clostridium sp1 and Clostridium sp2), a type of bacteria that belongs to the class of the exoelectrogen. The results showed that the applied external resistance influenced the performance of the MFC reactor. Thus the selection of the proper external resistance is an essential factor in the MFC reactor's operation.
Textile Dye Reactive Black 5 (RB5) Bio-Sorption with Moving Bed Biofilm Reactor and Activated Sludge Suryawan, I Wayan Koko; Helmy, Qomarudin; Notodarmojo, Suprihanto; Pratiwi, Riska; Septiariva, Iva Yenis
Indonesian Journal of Environmental Management and Sustainability Vol. 5 No. 2 (2021): June
Publisher : Research Centre of Inorganic Materials and Complexs

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26554/ijems.2021.5.2.67-71

Abstract

Reactive Black 5 (RB5) is one of the dyes used in textile industries in Indonesia. However, the high color content can interfere with the condition of water bodies if not treated. This waste treatment process is usually treated with biological treatment processes. Biological processing often used is the MBBR unit and activated sludge. This study aims to determine the RB5 dye’s bio-sorption efficiency using MBBR processing and activated sludge. MBBR processing and activated sludge consist of seeding, acclimatization, and running stages. This research was carried out using a real textile wastewater approach by adding 100 mg/L RB5 and adding 1000 mg/L starch solution. The processing results of the seeding stage indicate increasing in biomass. The acclimatization stage with 50% and 75% of wastewater indicates increased biomass and color removal. The RB5 color removal efficiency results in the MBBR unit and activated sludge show 41% and 84% values. The MBBR processing shows fluctuations each time where the desorption process occurs in the color removal. For this reason, the ozone pre-treatment process is conducted in the MBBR unit. The integrated pre-treatment with MBBR results show the same fluctuation as the previous processing with a color removal efficiency of 43% with a color removal efficiency of 43%.
INFLUENCE OF ORGANIC LOADING AND MIXING TO THE STABILIZED LEACHATE COD REMOVAL USING CIRCULATING ANAEROBIC REACTOR Aghasa Aghasa; Qomarudin Helmy; Mochammad Chaerul
Reaktor Volume 17 No. 2 Juni 2017
Publisher : Dept. of Chemical Engineering, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (260.718 KB) | DOI: 10.14710/reaktor.17.2.59-66

Abstract

Abstract In Indonesia, several leachate treatments were operated with most of the treatments are using conventional anaerobic lagoon system in pre-treatment section. However, most of the treatments still have low organic removal efficiency. In several studies, removal efficiency could be increased through several modifications inside the pond and one of them is by using mixing addition. Therefore, the aim of this study was to compare leachate organic removal efficiency by using mixing and without using mixing modification. This research used 3 kinds of Circulating Anaerobic Reactor (CAR) where 0.5 kg/m3∙day Organic Loading Rate (OLR) in reactor-1 (with mixing) and reactor-3 (without mixing) and 1.0 kg/m3∙day OLR in reactor-2 (with mixing) were operated inside the reactor. From the results, the organic removal efficiency in reactor-1 was 81.82%, reactor-2 was 82.22%, and reactor-3 was 41.67%. It can be proven that leachate organic removal efficiency was possible to be increased with the addition of mixing inside the treatment system. Keywords: Circulating Anaerobic Reactor; leachate; mixing; organic loading; removal efficiency  Abstrak PENGARUH BEBAN ORGANIK DAN PENGADUKAN TERHADAP PENYISIHAN COD LINDI TERSTABILISASI DENGAN MENGGUNAKAN CIRCULATING ANAEROBIC REACTOR. Di Indonesia, pengolahan lindi dioperasikan dengan sebagian besar pengolahan menggunakan sistem kolam anaerobik konvensional pada bagian pre-treatment. Akan tetapi, sebagian besar pengolahan masih memiliki penyisihan organik yang rendah. Dalam beberapa penelitian, efisiensi penyisihan dapat ditingkatkan melalui beberapa modifikasi di dalam kolam dan salah satunya adalah dengan menggunakan pengadukan. Oleh karena itu, tujuan dari penelitian ini adalah untuk membandingkan efisiensi penyisihan organik lindi dengan menggunakan pengadukan dan tanpa menggunakan pengadukan. Pada penelitian ini digunakan 3 jenis Circulating Anaerobic Reactor (CAR) dimana reaktor tersebut dioperasikan dengan Organic Loading Rate (OLR) sebesar 0,5 kg/m3∙hari di dalam reaktor-1 (dengan pengadukan) dan reaktor-3 (tanpa pengadukan) dan OLR sebesar 1,0 kg/m3∙hari dalam reaktor -2 (dengan pengadukan). Dari hasil penelitian, efisiensi penyisihan organik di dalam reaktor-1 adalah sebesar 81,82%, reaktor-2 sebesar 82,22%, dan reaktor-3 sebesar 41,67%. Melalui hal tersebut, dapat dibuktikan bahwa efisiensi penyisihan organik pada lindi memungkinkan untuk ditingkatkan dengan penambahan pengadukan di dalam sistem pengolahan. Kata kunci: Circulating Anaerobic Reactor; lindi; pengadukan; beban organic; efisiensi penyisihan  
PRODUKSI DAN KARAKTERISASI GUM XANTHAN DARI AMPAS TAHU SEBAGAI PENGENTAL PADA PROSES TEKSTIL Srie Gustiani; Qomarudin Helmy; Cica Kasipah; Eva Novarini
Arena Tekstil Vol 32, No 2 (2017)
Publisher : Balai Besar Tekstil

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (378.378 KB) | DOI: 10.31266/at.v32i2.3528

Abstract

Pada proses pencapan tekstil diperlukan zat pembantu berupa pengental untuk menghantarkan warna pada kain. Beberapa pengental alam dapat digunakan untuk proses pencapan tersebut salah satu diantaranya adalan gum xanthan. Gum xanthan dapat diperoleh dari aktivitas mikroorganisme dengan diberikan nutrisi yang mencukupi untuk pertumbuhannya, seperti sumber karbon dan nitrogen. Sumber karbon dapat diperoleh dari ampas tahu sisa dari kegiatan industri pembuatan tahu. Pada penelitian ini, digunakan ampas tahu sisa dari proses pembuatan tahu di industri tahu rumahan, sebagai substrat dalam produksi gum xanthan oleh bakteri Xanthomonas campestris. Gum xanthan yang dihasilkan dicoba sebagai pengental pada proses tekstil dengan melihat sifat-sifat dari pengental diantaranya viskositas, dilihat gugus-gugus fungsional gum xanthan dengan analisis FTIR, melihat morfologi gum xanthan serbuk menggunakan SEM, kadar air, kadar abu, derajat putih dan kekakuan kain. Hasil dari Penelitian ini diperoleh gum xanthan sebanyak 35 g/L pada kondisi konsentrasi tepung ampas tahu sebanyak 2% (b/v), penambahan sukrosa 1% (b/v), volume kultur bakteri Xanthomonas campestris sebanyak 20% (v/v) dan proses fermentasi yang dilakukan selama 5 hari. Dari hasil tersebut membuktikan bahwa bakteri Xanthomonas campestris mampu mengkonversi gula menjadi gum xanthan maksimal sebesar 87,5%. Dari hasil karaktisasi derajat putih dan kekakuan kain, gum xanthan dari tepung ampas tahu dapat digunakan sebagai pengental pada proses tekstil baik untuk serat sintetis maupun serat alam.
SINTESIS NANOPARTIKEL PERAK DAN UJI AKTIVITASNYA TERHADAP BAKTERI E. coli DAN S. aureus Tatang Wahyudi; Doni Sugiyana; Qomarudin Helmy
Arena Tekstil Vol 26, No 1 (2011)
Publisher : Balai Besar Tekstil

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (813.881 KB) | DOI: 10.31266/at.v26i1.1442

Abstract

Pada penelitian ini dipelajari sintesis nanopartikel perak dan uji aktivitasnya sebagai anti-mikroba terhadapEscherichia coli dan Staphylococcus aureus. Nanopartikel perak disintesis melalui pembentukan larutan koloidperak dengan metode reduksi perak nitrat dengan zat pereduksi natrium borohidrida. Performa hasil sintesis larutankoloid nanopartikel perak dalam menghambat pertumbuhan mikroba dievaluasi melalui uji aktivitas terhadapEscherichia coli dan Staphylococcus aureus. Pada perbandingan molar NaBH4/AgNO3 = 1,2 dan perbandinganberat Ag/asam poli akrilat (PAA) = 10,7, diperoleh diameter rata-rata nanopartikel perak sebesar 71,8 nm dengannilai polydispersity index (PI) sebesar 0,293. Hasil sintesis larutan koloid nanopartikel memperlihatkan kemampuandalam menghambat pertumbuhan bakteri, dan daya hambat terhadap Staphylococcus aureus ditemukan 30% lebihkuat dibanding terhadap bakteri Escherichia coli. Hasil uji aktivitas antimikroba secara kuantitatif menunjukkanbahwa persentase reduksi bakteri dapat mencapai hingga lebih dari 99%.