Garuda - Garba Rujukan Digital

Development of learning module to improve competency achievement in the department of civil engineering education in Indonesia Daryono, Rihab Wit; Rochmadi, Sunar
Psychology, Evaluation, and Technology in Educational Research Vol 3, No 1 (2020)
Publisher : Research and Social Study Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33292/petier.v3i1.54

The purpose of this study was to determine the process of preparation and feasibility of the Building Maintenance learning module in the Department of Civil Engineering in vocational high schools. This research is a research and development (R&D) study using the Four D (4D) model. The Building Maintenance learning module is validated by one material expert and one media expert and the Building Maintenance subject teacher. The module contains a title, introduction, learning, evaluation questions, UAS, answer key, and bibliography. The analysis shows that the learning module as a whole is very feasible to be used as a teaching material. The results of the analysis of the data obtained an average score from the material experts isÂ 90.0% so that it belongs to the "very feasible" category, the average score from the results of the media experts is 74.194% so that it belongs to the "feasible" category, and the average score of the teacher is 88.46% so it is included in the "very feasible" category. Then it can be concluded that the Building Maintenance module is in the very feasible category.

MEMELIHARA LINGKUNGAN DENGAN PENGATURAN TATA RUANG PENGGUNAAN LAHAN Sunar Rochmadi
Jurnal Cakrawala Pendidikan CAKRAWALA PENDIDIKAN, EDISI 2,1995,TH.XIX
Publisher : LPMPP Universitas Negeri Yogyakarta

Kepentingan uotuk memelihara lingkungan sering berbenturandengan kebutuhan untuk mcmbangun. Pengaturan tata ruangpengunaan lahan dapat dip~kai untuk menengahi konflik antaradua kepentingan tersebut. Dengan demikian pembangunan yangberkesinambungan (sustainable development) dapat berjalan.Beberapa aspek yang perlu diperhitungkan dalam pcngaturantata ruang antara lain aspek topografi. hidrolgi. geologi. tanah,vegctasi dan penggunaan Jahan. Masing-masing aspek tersebutperlu ditinjau kesesuaiannya terhadap berbagai jenis penggunaan1ahan. Dalam studi kelayakan. kesesuaian tcrsebut dapat dituangkandalum bentuk peta-peta kesesuaian untuk kemudian dibuatpeta kcsesuaian gabungan yang mencakup semua aspek. HasHsudi kelayakan ini dapat digunakan untuk penyusunan rencana tataruang penggunaan lahan.

PERAWATAN ALAT UKUR TANAH DIGITAL Sunar Rochmadi
Inersia : Jurnal Teknik Sipil dan Arsitektur Vol 1, No 1 (2005): Maret
Publisher : Universitas Negeri Yogyakarta

ABSTRACTThis research aims to gather information of the maintenance methods fordigital surveying instruments to be ready-to-use condition. The instrumentmaintenance consists of maintenance in the laboratories including maintenanceof storing and borrowed and returned checking, and maintenance in the fieldsincluding maintenance of storing in camp, transporting, and using.This research applies descriptive-qualitative approach. The chosen researchsubjects are five surveying laboratory managers and technicians, and five seniorsurveyors, in Yogyakarta City and surroundings. The data are collected by indepthinterviews, participatory observations, and document analyses. The dataare analysed by categorization, data reduction, data display, and verificationprocesses. To achieve credibility of the research results, data triangulation isconducted, for both data sources and data collection methods.The research results show that the maintenance method in instrumentstoring, both in the laboratories and in the fields, mainly preventing humiditytriggering fungi growth and keeping instrument security. The maintenance methodin instrument

INDUSTRY PARTNERSHIPS LEARNING MODELS FOR SURVEYING AND MAPPING OF VOCATIONAL HIGH SCHOOLS Sunar Rochmadi
Jurnal Pendidikan Teknologi dan Kejuruan Vol 23, No 2 (2016): (October)
Publisher : Faculty of Engineering, Universitas Negeri Yogyakarta

This study aims to identify a learning involving the world of work, to formulate the learning model, and to evaluate the learning model. This study used a qualitative approach for design and development research, consisting of the development and validation steps. The study concludes as follows. (1) the learning through partnerships having been conducted in all vocational high schools were industrial practice and vocational practice examination. (2) the constraints of learning through partnerships were mainly the far distance and the industry schedules that did not always match with the school’s. (3) the model development could be done by improving the learning quality by industrial practices in the private companies and with adding the learning model by industry visits, guest teaching, and up-to-date technology training. (4) the implementation of the developed model showed the feasibility and the effectiveness to prepare the students with the competencies required by the world of work. (5) the learning models through partnerships that could be practiced were guest teaching, orientation for industrial practice, industrial practices, students’ industry visits, up-to-date technology training, and vocational practice examination.

APLIKASIPROGRAM TOPOCAD UNTUK PENGGAMBARAN HASIL UKUR TANAH Sunar Rochmadi , Afif Nofarida
Inersia : Jurnal Teknik Sipil dan Arsitektur Vol 2, No 1 (2006): Maret
Publisher : Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/inersia.v2i1.8304

ABSTRACTConstruction works need various drawings, including the drawings ofearth surface profiles used to prepare plan and design of construction works.If the drawing process of earth surface profile is conducted manually, it will takerelatively longer time. Using Topocad program it is hoped to produce highprecission earth surface profiles. This research aims to prove that the drawingprocess is more effective and efficient using Topocad computer program.This research was conducted using the Football Field ReplacementDevelopment Project in Dusun Kayen, Desa Sinduadi, Kecamatan Mlati,Kabupaten Sleman, Yogyakarta. The field measurement was conducted togather data used to calculate distance and height difference between points.The data were processed in the Surveying Laboratory, FaCUlty of Engineering,UN~Based on data analysis, it is concluded that the calculation process ofsurveying data is more effective and efficient supported by Microsoft Excelsoftware. Applying Topocad program using the surveying data results singlecross sections, multiple cross section, single long section, polygon and crosssection detail were drawn digitally. The drawings produced utiliZing Topocadprogram are easy to be edited and therefore should be suitable for planningand designing civil construction works, because the drawings are in theenvironment of the AutoCAD software.Key words: Earth surface~ profile, computer aided drawing, surveying drawing.

PENGGUNAAN KOMPUTER UNTUK MENGHITUNG OATA UKUR TANAH DI KALANGAN PARA SURVEYOR Sunar Rochmadi
Inersia : Jurnal Teknik Sipil dan Arsitektur Vol 2, No 2 (2006): September
Publisher : Universitas Negeri Yogyakarta

AbstractThis research aims to gather information of computer uses for landsurveying data calculation in the work field of land surveying andmapping in the Yogyakarta Province and surroundings. The researchfocuses on the actors of computer uses, surveying data types, softwaretypes, and its linkage with the drawing process.This research applies qualitative approach. The chosenresearch subjects are seven land surveyors in Yogyakarta andsurroundings. The data were collected by in-depth interview,participating observation, and document analysis. The data analysisconsists of the processes of categorizing, data reduction, data display,and verification.The research results show that the computer uses for landsurveying data calculation are applied by various levels of surveyor, fromthe lower competency level, Young Surveyor or operator, with seniorhigh-school education background, to the highest level, Main Surveyoror Senior Professional Surveyor. Computer aided calculation is appliedfor all surveying data types, especially mapping framework surveyingdata. traverses and levels. The common software used for surveyingdata calculation is Microsoft Excel, utilizing formulae and functionmenus. The drawing processes of calculation results can be categorizedinto three groups: manual drawing, computer drawing using AutoCADsoftware, and drawing with the integrated program for calculation anddrawing.Keywords: computer uses, land-surveying data, surveying datacalculation.

Development of learning module to improve competency achievement in the department of civil engineering education in Indonesia Rihab Wit Daryono; Sunar Rochmadi
Psychology, Evaluation, and Technology in Educational Research Vol. 3 No. 1 (2020)
Publisher : Research and Social Study Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33292/petier.v3i1.54

The purpose of this study was to determine the process of preparation and feasibility of the Building Maintenance learning module in the Department of Civil Engineering in vocational high schools. This research is a research and development (R&D) study using the Four D (4D) model. The Building Maintenance learning module is validated by one material expert and one media expert and the Building Maintenance subject teacher. The module contains a title, introduction, learning, evaluation questions, UAS, answer key, and bibliography. The analysis shows that the learning module as a whole is very feasible to be used as a teaching material. The results of the analysis of the data obtained an average score from the material experts isÂ 90.0% so that it belongs to the "very feasible" category, the average score from the results of the media experts is 74.194% so that it belongs to the "feasible" category, and the average score of the teacher is 88.46% so it is included in the "very feasible" category. Then it can be concluded that the Building Maintenance module is in the very feasible category.

The Development of Interactive Media Based on Video Animation in the Use of a Total Station for Measurement Stake out the Building Muhammad Bachrawi Luthfi; Sunar Rochmadi; Rihab Wit Daryono; Rozan Pajri Sandria Saputra
Budapest International Research and Critics in Linguistics and Education (BirLE) Journal Vol 4, No 1 (2021): Budapest International Research and Critics in Linguistics and Education, Februa
Publisher : BIRCU

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33258/birle.v4i1.1767

This study aims to: (1) develop the concept of instructional media based on total station animation video which is used to measure building stake out; (2) developing interactive media designs; (3) due diligence of interactive media; and (4) dissemination of interactive media. This research is a research and development which refers to the 4D model. Non-test instruments with four-scale answer choices were used. The questionnaire was used in the expert validation process and the student's feasibility assessment. Data were analyzed quantitatively. The results of this research and development of instructional media conclude: (1) the concept of instructional media based on video animation of the total station is used to measure building stake out; (2) the initial media design consists of five main menus; (3) based on the assessment of instructional media by material experts it is categorized as "very feasible" with a percentage of 85.278% for the five aspects assessed; based on the evaluation of media experts, it is categorized as "very feasible" with a percentage of 90.409% for the three aspects assessed; and based on users (students) the percentage is 81.306% with the category "very feasible"; (4) dissemination using two methods: offline and online.

PENGEMBANGAN VIDEO PEMBELAJARAN OPEN STREET MAP UNTUK PEMBUATAN PETA DIGITAL FORMAT SHAPEFILE MENGGUNAKAN SPATIAL MANAGER Ilham Marsudi; Febtri Yanna Ramadani; Sunar Rochmadi; Nuryadin Eko Raharjo; Nur Hidayat
Jurnal Pendidikan Teknik Sipil Vol 2, No 2 (2020): November
Publisher : Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jpts.v2i2.36353

Tujuan penelitian ini adalah mengembangkan video pembelajaran OpenStreetMap untuk pembuatan peta digital format shapefile menggunakan Spatial Manager. Penelitian ini termasuk dalam jenis penelitian pengembangan (Research and Development/RD) yang mengacu pada model pengembangan 4D (Define, Design, Development, and Disseminate) oleh Thiagarajan. Teknik pengumpulan data menggunakan angket yang diberikan kepada ahli materi, ahli media, dan pengguna (mahasiswa). Teknik analisis data menggunakan teknik analisis deskriptif kuantitatif. Hasil penelitian dan pengembangan media pembelajaran memperoleh kesimpulan sebagai berikut: (1) Tahap define menghasilkan kebutuhan pembelajaran tentang OpenStreetMap untuk pembuatan peta digital format shapefile menggunakan Spatial Manager; (2) Tahap design menghasilkan flowchart, storyboard, dan take video yang sesuai serta produk yang dihasilkan berupa video pembelajaran dengan teknik animasi dan screen record berformat *.mp4 yang dapat diputar di komputer/laptop maupun smartphone standar, berdurasi selama 15 menit 50 detik, dan ukuran file sebesar 56,7 MB; (3) Tahap development menghasilkan penilaian tingkat kelayakan media video pembelajaran yang dikembangkan berdasarkan penilaian oleh ahli materi adalah 90,91 % termasuk dalam kategori “layak”, sedangkan penilaian oleh ahli media adalah 91,13 % termasuk dalam kategori “layak”, dan penilaian pengguna (mahasiswa) adalah 86,62 % termasuk dalam kategori “layak”; (4) Tahap disseminate merupakan penyebarluasan hasil penelitian berupa produk video yang diunggah melalui platform Youtube dan memberikan file kepada pengguna.

PENGEMBANGAN VIDEO PEMBELAJARAN OPENSTREETMAP UNTUK PEMBUATAN PETA DIGITAL FORMAT SHAPEFILE MENGGUNAKAN ARCGIS Kukuh Setyo Budi; Nuryadin Eko Raharjo; Sunar Rochmadi; Ilham Marsudi; Nur Hidayat
Jurnal Pendidikan Teknik Bangunan Vol 2, No 1 (2022): Jurnal Pendidikan Teknik Bangunan
Publisher : Universitas Pendidikan Indonesia (UPI)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.17509/jptb.v2i1.45973

Tujuan penelitian ini adalah mengembangkan video pembelajaran OpenStreetMap untuk pembuatan peta digital format shapefile menggunakan ArcGIS. Pengembangan video pembelajaran ini dimaksudkan untuk menyediakan media pembelajaran pada Jurusan Pendidikan Teknik Sipil dan Perencanaan FT UNY pada kompetensi pembuatan peta digital mata kuliah Praktikum Geomatika II. Penelitian ini menggunakan metode penelitian dan pengembangan atau research and development (RD) yang mengacu pada model penelitian 4D (Define, Design, Development and Disseminate) oleh Thiagarajan. Teknik pengumpulan data menggunakan kuisioner yang diberikan kepada ahli materi, ahli media dan pengguna (mahasiswa). Teknik analisis data menggunakan teknik analisis deskriptif kuantitatif. Hasil penelitian ini adalah pegembangan media pembelajaran Video OpenStreetMap pembuatan peta digital format shapefile menggunakan ArcGIS dengan model penelitian 4D. Hasil define menghasilkan kebutuhan media pembelajaran video pembuatan peta digital OpenStreetMap. Design menghasilkan konsep media pembelajaran yang dikembangkan, materi yang sesuai, narasi materi video pembelajaran, layout video pembelajaran serta produk yang dihasilkan berupa video pembelajaran dengan teknik animasi dan screen record berformat. Tahap development berdasarkan penilaian ahli materi diperoleh hasil sebesar 3,55 dengan kategori sangat layak, dari ahli media diperoleh hasil sebesar 3,50 dengan kategori sangat layak serta penilaian oleh pengguna (mahasiswa) dengan hasil sebesar 3,57 dengan kategori sangat layak.

Title

Found 13 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 13 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 13 Documents
Search