Claim Missing Document
Check
Articles

Found 10 Documents
Search

Pitting Depth Prediction Caused by SRB using Empirical Equation Fatah, Martin; Ismail, Mokhtar C; Wahjoedi, Bambang A; Rusdi, Halim; Sulistyo, Eko
Jurnal Rekayasa Mesin Vol 10, No 1 (2019)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/ub.jrm.2019.010.01.6

Abstract

Microbiologically influenced corrosion (MIC) is a serious problem in the oil and gas industry. The most common microorganism responsible for MIC is sulfate-reducing bacteria (SRB) which produces detrimental sulfide ions into the environment. Currently, there are some prediction models that develop to predict corrosion rate caused by SRB. However, among the models, the prediction is limited to predict the general corrosion rate, whereas, SRB caused localized corrosion. Thus, the objective of this work is to predict the pitting depth caused by SRB using available empirical equation. The study showed that the pitting depth increased with the increasing of sulfide concentration. In contrast, the pitting depth decreased with increasing sulfite concentration.  The decreasing of pitting depth is related to the inhibitive FeS film formed, while the increasing of pitting depth is caused by the decreasing of the film thickness in the presence of sulfite.
Implementasi Solar Cell Panel Untuk Penerangan Umum Di Wilayah Serang Baru - Bekasi Ibnu Hajar; Yuliansyah Yuliansyah; Jumiati Jumiati; Dhami Johar Damiri; Martin Choirul Fatah; I Made Indradjaja Marcus Brunner
Unri Conference Series: Community Engagement Vol 3 (2021): Seminar Nasional Pemberdayaan Masyarakat
Publisher : Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31258/unricsce.3.289-295

Abstract

Community Service (PkM) partner are located in Kp. Cipalahlar RT. 010/005 Sukaragam Village, Serang Baru District, Bekasi Regency, Jawa Barat Province. The Kp. Cipalahlar, although.it is surrounded by a residential area and not far from an industrial area in Bekasi, this village has received less attention from the Bekasi Regency Government, it can be seen the electrical cable network that is connected to the houses of the villagers is only put on trees and no electricity poles at all. So, it can be understood when in Kp. Cipalahlar does not have public street lighting facility (PJU) so when night comes the village becomes very dark. Therefore, to help residents get lighting at night, especially lighting on concrete roads, the community service (PkM0 team installed three public street lighting (PJU). The PJU is very useful for residents to carry out their activities at night such as going to the mosque for congregational prayers. The mosque will be lively with the presence of children to recite the Qur’an. The type of PJU installed is PJU based on solar cell panels because it is more practical and requires almost no maintenance in operation and has a long service life, up to 25-30 years.
ANALISA PROPERTIES MATERIAL PIPA ECONOMIZER PLTU JATENG 2 ADIPALA 1 X 660 MW Martin Fatah; Dhami Johar Damiri; Halim Rusjdi; rafsanjani rafsanjani
JURNAL POWERPLANT Vol 6 No 2 (2018): JURNAL POWER PLANT
Publisher : Sekolah Tinggi Teknik - PLN

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33322/powerplant.v6i2.301

Abstract

A leaking of welding joint in the economizer tube was observed at PLTU Adipala. The tube was just operated for 2 months (1440 hours) since the commissioning. The leaking might be caused by the aggressive working environment of the tube. This aggressive environment might also decrease the performance of material properties. The objective of the research is to investigate the tube material properties after 2 months operation. The material properties was analysed using mechanical, visual and metallography test, i.e. tensile test, hardness test, optical microscope as well as SEM/EDX. It is observed that the yield tregth and UTS of the tube are within SA210 C carbon steel standard. Hardness of the tube is slightly lower than SA210 C standard.. Visual inspection both on fireside and waterside shows corrosion attack. SEM shows pitting corrosion on the inner surface. However, EDX doesn’t show any corrosive species in the inner surface of the tube.
Pelatihan Penulisan Jurnal Ilmiah untuk Civitas Akademika Universitas Brawijaya Malang Ibnu Hajar; Martin Choirul Fatah; Edy Ispranyoto; Agus Yogiyanto; yuliansyah yuliansyah; Supriadi Legino
Terang Vol 2 No 2 (2020): TERANG : Jurnal Pengabdian Pada Masyarakat Menerangi Negeri
Publisher : Sekolah Tinggi Teknik - PLN

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33322/terang.v2i2.372

Abstract

In high education, scientific journal has an important role in advancing the development of sciences as well as career development for researchers and academics. For the academics community (lecturer, researcher, and student), of course they have to do research. After research finished, and then it will be finished to do a research report. The research report has varying forms. For lecturer research it is usually in the form of a research report, while research report as an end product from every high education level, it can be a thesis, or dissertation. For widely publication of a result of research, a research report can be made in a article that it can be published in reputable scientific journal both nasionally and internationally. But generally, most academics community do not / have not thought about doing research and then the results of their research are written and published in the form of a journal. It is right that several difficulties that faced akademics community in writing a scientific journal such as lazy, don’t know (there is no idea) about what will be written, there is a idea but don’t know how to start it, and various other reason. Therefore, various obstacles, and difficulties they faced in writing a scientific journal, the team of community services (PKM) of Electrical Engineering, STT PLN Jakarta offer a solution i.e workshop in writing scientific journal through community service activities. This workshop has been carried out due to cooperation with our partner that is Machanical Engineering Department, Engineering Faculity, Brawijaya University. Our partner Brawijaya University prepared participants and workshop venue. The implementation of this workshop in writing scientific journal received a very good response from the participants and provide motivation to them to do research which is then published in the form of scientific journal articles.
Penerapan Metode Kendali Aliran Sebagai Upaya Pelestarian Sumber Daya Air Di Pondok Pesantren Nurul Haramain Ibnu Hajar; I Made Indradjaja Marcus Brunner; Dhami Johar Damiri; Martin Choirul Fatah; Yuliansyah Yuliansyah; Jumiati Jumiati
Terang Vol 5 No 2 (2023): TERANG : Jurnal Pengabdian Pada Masyarakat Menerangi Negeri
Publisher : Sekolah Tinggi Teknik - PLN

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33322/terang.v5i2.1760

Abstract

Environmental damage can be caused by an imbalance of the earth’ constituent elements, which one of the elements is scarcity of clean water in the earth. Dearth of clean water is predicted that will be experienced more than a half of word population of nine million of human being in 2050. The phenomenon of the scarcity of the clean water has been occurred especially in Indonesia that it is a country which has six percent of the potential of the clean water, but in fact it shows the need of the clean water of Indonesia population are still not enough. The dearth of the clean water needs to get serious attention from all stake holder, included people in the boarding school. An effort to decrease the scarcity of the clean water rate is by behaving frugally in using the clean water. To do that need to do socialization massively to the people and it require a long time. Therefore, beside the socialization massively, engineering to decrease the flow rate in using the clean water through the valves that is by applicating flow control method. This simple technology of flow control application, the community service team and Nurul Haramain boarding school located in Kampung Saitem, Ciburayut, Cigombong, Bogor, West Java are collaborated. A measurement result of flow rate before the flow restrictor is applicated in the valve is 7.76 liter/minute and after applicated decrease to 1.13 litter/minute. Percentage of decreasing is to reach 83 percent.
PERSAMAAN REGRESI LINIER BERGANDA UNTUK MEMPREDIKSI EFISIENSI BOILER Eko Sarwono; Martin Choirul Fatah; Brunner, I Made Indradjaja Marcus Brunner
Jurnal Rekayasa Mesin Vol. 15 No. 2 (2024)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v15i2.1179

Abstract

Boiler efficiency calculation is crucial to determine the reliability of boiler performance. Generally, boiler efficiency is calculated by the heat loss method, which considers losses in the combustion process. The calculation consumes more time due to detailed procedure and analysis. This research aims to develop a multiple linear regression equation in predicting boiler efficiency based on performance test data from PLTU X unit 1. The equation was then validated with a classical assumption test, i.e. normality, linearity, multicollinearity, heteroscedasticity, autocorrelation, and hypothesis test. In addition, the equation was used to calculate the boiler efficiency at PLTU ABC (unit 1 & 2) and PLTU XYZ (unit 1). The results show that there is approximately 0.49% boiler efficiency discrepancy among equation and heat loss method calculations.
Optimasi Dielektrika Isolator Polimer Silicone Rubber menggunakan Bahan Pengisi Limbah Coal Fly Ash THAHARA, ANDI AMAR; FATAH, MARTIN CHOIRUL; MULYANA, IWA GARNIWA; TIO, CHRISTIONO; FIKRI, MIFTAHUL
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 11, No 4: Published October 2023
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v11i4.1075

Abstract

ABSTRAKBerdasarkan penelitian dengan judul “Electrical and Mechanical Properties of Fly Ash Filled Silicone Rubber for High Voltage Insulator” oleh Manjang dkk., (2015), telah dilakukan eksperimen uji karakteristik dielektrika fly ash sebagai filler pada isolator Silicone Rubber (SiR), namun belum adanya analisa optimasi komposisi kadar fly ash yang dilakukan, sehingga belum diperoleh nilai rekomendasi komposisi terbaik. Oleh karena itu, tujuan pada penelitian ini dilakukan studi lebih lanjut untuk menentukan nilai optimasi dari jenis komposisi pemanfaatan fly ash sebagai filler pada isolator SiR dengan metode analisa regresi kuadratik dan memperoleh model kuadrat komposisi fly as yang mengoptimalkan kekuatan dielektrika. Hasil optimasi komposisi fly ash pada pengujian sifat hidrofobik sebesar 20.69% dari komposisi fly ash dan pengujian permitivitas relatif sebesar 80% dari komposisi fly ash.Kata kunci: fly ash batu bara, filler, optimasi, regresi kuadratik, silicone rubber ABSTRACTBased on research entitled "Electrical and Mechanical Properties of Fly Ash Filled Silicone Rubber for High Voltage Insulators" by Manjang et al., (2015), experiments have been carried out to test the dielectric characteristics of fly ash as a filler on Silicone Rubber (SiR) insulators, but there is no the optimization analysis of the composition of the fly ash content was carried out, so that the best composition recommendation value has not been obtained. Therefore, the aim of this research is to conduct further studies to determine the optimization value of the type of composition utilizing fly ash as filler in SiR insulators using the quadratic regression analysis method and obtain a quadratic model of fly ash composition that optimizes dielectric strength. Optimization results of the fly ash composition in testing the hydrophobic properties of 20.69% of the fly ash composition and relative permittivity testing of 80% of the fly ash composition.Keywords: coal fly ash, filler, optimization, quadratic regression, silicone rubber
Analisis Desain PLTS Atap Tipe Gable Roof menggunakan Metode Weight Score MUCHAROMAH, NURUL MAGHFIROH; FATAH, MARTIN CHOIRUL; AKBAR, ZICO ALAIA
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 11, No 2: Published April 2023
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v11i2.408

Abstract

ABSTRAKPLTS merupakan salah satu pembangkit yang dapat diterapkan di lingkungan perkotaan dengan memanfaatkan atap gedung sebagai lokasi pemasangannya. Salah satu lokasi yang berpotensi untuk dilakukan pemasangan PLTS adalah pada atap gedung perkantoran PT. PLN (Persero) UPT Cirebon yang memiliki luas total atap sebesar 3.150,65 m2. Desain PLTS pada lokasi penelitian dibuat menggunakan software PVSOL dengan menguji tiga skenario yaitu: penggunaan 13 inverter, 9 inverter dan optimalisasi sudut dengan 9 inverter. Dari hasil simulasi pemasangan PLTS atap pada lokasi penelitian menggunakan PVSOL didapatkan hasil produksi energi sebesar 376.354,87-386.934,28 kWh per tahun, persentase IRR sebesar 13,94%-14,35% dan penurunan emisi sebesar 272,828-280,498 kgCO2 per tahun, yang selanjutnya akan diolah menggunakan metode weight score untuk menentukan skenario terbaik yang dapat diterapkan di lokasi penelitian. Dari hasil pengolahan data menggunakan metode weight score didapatkan skenario tiga merupakan skenario terbaik (dengan nilai 0,335) yang dapat diterapkan di lokasi penelitian.Kata kunci: PLTS atap, gable roof, weight score, PVSOL ABSTRACTA solar power plant is one of the power generators in an urban environment which does not need large land assets by utilizing a building roof as the installation place. One of the potential installation places is the roof of the PT. PLN (Persero) UPT Cirebon office building which has a total roof area of 3,150.65 m2. The design of the solar power plant was made using PVSOL software using 3 scenarios, which are: 9 inverters, 13 inverters, and optimizing angles with 9 inverters. From the simulation results, it is observed that the energy production results are 376,354.87-386,934.28 kWh per year, the IRR percentage is 13.94%-14.35% and the emission reduction is 272,828-280,498 kgCO2 per year. To define the best scenario from the above results, weight score method were employed whereby scenario three is the best scenario (with a score of 0.335) that can be applied at the location.Keywords: Rooftop solar power plant, gable roof, weight score, PVSOL
PERSAMAAN REGRESI LINIER BERGANDA UNTUK MEMPREDIKSI EFISIENSI BOILER Eko Sarwono; Martin Choirul Fatah; Brunner, I Made Indradjaja Marcus Brunner
Jurnal Rekayasa Mesin Vol. 15 No. 2 (2024)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/jrm.v15i2.1179

Abstract

Boiler efficiency calculation is crucial to determine the reliability of boiler performance. Generally, boiler efficiency is calculated by the heat loss method, which considers losses in the combustion process. The calculation consumes more time due to detailed procedure and analysis. This research aims to develop a multiple linear regression equation in predicting boiler efficiency based on performance test data from PLTU X unit 1. The equation was then validated with a classical assumption test, i.e. normality, linearity, multicollinearity, heteroscedasticity, autocorrelation, and hypothesis test. In addition, the equation was used to calculate the boiler efficiency at PLTU ABC (unit 1 & 2) and PLTU XYZ (unit 1). The results show that there is approximately 0.49% boiler efficiency discrepancy among equation and heat loss method calculations.
Corrosion Behavior of a Motor-Driven Filter Pipeline in Seawater Using the Weight Loss Method: Effect of Temperature and Flow Martin Fatah; Ahmad Pratama; Andhika Pramono
Jurnal Mesin Nusantara Vol 9 No 1 (2026): Jurnal Mesin Nusantara
Publisher : Universitas Nusantara PGRI Kediri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29407/jmn.v9i1.27196

Abstract

Failure of a motor-driven filter pipeline was reported due to seawater-induced corrosion. The objective of this study was to investigate the corrosion behavior of the pipeline material in seawater under static and dynamic conditions at temperatures of 27, 40, 60, and 80°C using the weight-loss method. Surface characterization was performed using scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD). At 80°C, both static and dynamic conditions exhibited corrosion rates approximately twice those observed at 27°C. SEM observations revealed the formation of a dense and adherent corrosion-product layer at 27°C. However, at 80°C, cleavage and cracking of the corrosion-product layer were observed, allowing corrosive species to diffuse more readily to the metal surface and thereby accelerating corrosion. XRD analysis confirmed that the corrosion products consisted primarily of Fe2O3 (hematite) and Fe3O4 (magnetite).