Claim Missing Document
Check
Articles

Found 27 Documents
Search

Perancangan dan Implementasi Sistem Jemuran Otomatis Berbasis Internet of Things Menggunakan Sensor Cuaca Irsyad Nugraha; Lucky Indra Kesuma; Kemas Muhammad Wahyu Hidayat
JURNAL TEKNIK INFORMATIKA UNIS Vol. 14 No. 1 (2026): Jutis (Jurnal Teknik Informatika)
Publisher : Universitas Islam Syekh Yusuf

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33592/jutis.v14i1.9381

Abstract

Penjemuran pakaian secara konvensional memiliki kendala ketika hujan turun saat pengguna tidak berada di rumah. Kondisi tersebut dapat menyebabkan pakaian kembali basah sehingga diperlukan sistem yang mampu memindahkan jemuran secara otomatis berdasarkan kondisi cuaca. Penelitian ini bertujuan merancang dan mengimplementasikan sistem jemuran otomatis menggunakan sensor hujan berbasis Arduino Uno. Metode penelitian yang digunakan adalah penelitian dan pengembangan dengan pendekatan prototipe, yang meliputi analisis kebutuhan, perancangan perangkat keras dan perangkat lunak, implementasi, serta pengujian fungsional. Sistem menggunakan Arduino Uno sebagai pengendali, sensor hujan sebagai pendeteksi air, dan motor servo SG90 sebagai penggerak jemuran. Pengujian dilakukan pada tiga kondisi, yaitu sensor kering, sensor terkena air, dan sensor tetap basah. Hasil pengujian menunjukkan bahwa jemuran tetap berada pada posisi awal ketika sensor kering, bergerak ke posisi aman ketika sensor mendeteksi air, dan tetap berada pada posisi tersebut selama sensor masih basah. Hasil ini menunjukkan bahwa fungsi dasar prototipe telah berjalan sesuai dengan rancangan pada skenario pengujian. Namun, sensor yang masih basah setelah hujan berhenti dapat menyebabkan jemuran tetap berada pada posisi masuk. Oleh karena itu, pengembangan logika kendali dan pengujian lanjutan diperlukan untuk meningkatkan respons sistem.
Design of a Delivery Order Archiving Information System at PT Prima Sukses Amanda Melia Sari; Kemas Muhammad Wahyu Hidayat; Jimmie Jimmie
International Journal of Multidisciplinary Sciences and Arts Vol. 5 No. 4 (2026): International Journal of Multidisciplinary Sciences and Arts, Article October 2
Publisher : Information Technology and Science (ITScience)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/ijmdsa.v5i4.9735

Abstract

PT Prima Sukses is a company engaged in the production and distribution of concrete piles. Delivery notes are used to document shipments, including shipment dates, recipients, destinations, and item details. However, the recording and archiving of these documents have been handled manually, making older records difficult to retrieve and requiring staff to summarize shipment information by reviewing physical files. These practices may increase processing time and expose records to risks of damage, loss, and recording errors. This study aims to design and develop a web-based delivery note archiving information system to support the recording, storage, retrieval, and reporting of delivery note data at PT Prima Sukses. The study adopts a Research and Development approach and applies the Waterfall model, which comprises requirements analysis, system design, implementation, testing, and maintenance. Data were collected through observation, interviews with personnel involved in administration and logistics, and documentation of delivery note records. The system was implemented using PHP, MySQL, HTML, and CSS. Its principal functions include user authentication, user and reference-data management, delivery note entry and maintenance, archive search, document upload, and report generation. Functional verification was conducted using black-box testing, in which system outputs were checked against expected functions without inspecting the program code. The manuscript reports that the implemented features operated according to the specified requirements. The resulting application provides a centralized digital repository and a more structured process for managing delivery note records. Further evaluation involving documented test cases and user feedback is recommended to quantify usability and efficiency improvements.
Design and Development of a Donut Sales Website as an Online Sales Medium Az zahrah Sartika Putri; Kemas Muhammad Wahyu Hidayat; Jimmie Jimmie
International Journal of Multidisciplinary Sciences and Arts Vol. 5 No. 4 (2026): International Journal of Multidisciplinary Sciences and Arts, Article October 2
Publisher : Information Technology and Science (ITScience)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/ijmdsa.v5i4.9736

Abstract

This study aims to design and develop a web-based donut sales system to address limitations in conventional sales, particularly in product information delivery, transaction recording, and sales administration. The system was developed using the Waterfall method, comprising requirements analysis, system design, implementation, testing, and maintenance planning. System design used UML models to describe user interactions and system processes, while PHP and MySQL were used for implementation and data management. The resulting application provides user registration and login, product browsing and searching, shopping-cart and wishlist functions, online ordering, and administrative features for managing products, categories, customer accounts, orders, and sales information. The main website features were checked independently by the developer to obtain an initial overview of their functionality. However, further systematic testing and evaluation involving actual users are needed to assess the system’s usability, reliability, and potential impact on sales administration. The article describes the system workflow and the interfaces available to administrators and customers. The developed platform is intended to make product information easier to access and to provide a more structured way to record and manage orders than a fully manual process. The administrative features also bring product and order information together in one application, supporting more consistent monitoring of sales activities. The study demonstrates the implementation of a web-based sales application for a donut business; however, further evaluation involving actual users and quantitative performance measures would be needed to establish its effect on sales efficiency and customer satisfaction.
Automatic Water Dispenser Based on Ultrasonic Sensor and Arduino Uno to Improve Hygiene Rara Viona Angelia; Zulhipni Reno Saputra Elsi; Kemas Muhammad Wahyu Hidayat
International Journal of Multidisciplinary Sciences and Arts Vol. 5 No. 4 (2026): International Journal of Multidisciplinary Sciences and Arts, Article October 2
Publisher : Information Technology and Science (ITScience)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/ijmdsa.v5i4.9737

Abstract

Automatic water dispensing technology can reduce direct contact with dispenser surfaces and support better control of water use. This study aimed to design and develop an automatic water dispenser using an HC-SR04 ultrasonic sensor and Arduino Uno to improve hygiene during the water dispensing process. The research used a design and development approach consisting of problem identification, literature study, hardware and software design, prototype assembly, system integration, testing, and evaluation. The HC-SR04 sensor was used to detect the presence and distance of a glass, while the Arduino Uno processed the sensor readings and controlled a water pump through a relay. System testing was conducted at several glass detection distances and through repeated measurements of the volume of water dispensed. The results showed that the sensor detected a glass at distances of 3, 5, 7, and 10 cm, while an object positioned beyond 12 cm was not detected. Five water volume tests produced 190, 195, 200, 192, and 198 mL, with an average volume of 195 mL per filling cycle. Functional testing also showed that the pump turned on when a glass was detected and turned off when the glass was removed. These findings indicate that the prototype operated according to the designed system and enabled water dispensing without direct contact. In practical terms, the system can support more hygienic dispenser use and reduce unnecessary water flow by activating the pump only when a glass is detected. Further development can focus on water-level monitoring, IoT integration, enclosure improvement, and longer testing.
Arduino Uno-Based Automatic Hand Soap Dispenser Using Ultrasonic Sensors for Hand Hygiene Ismiy Safitri; Apriansyah Apriansyah; Kemas Muhammad Wahyu Hidayat
International Journal of Multidisciplinary Sciences and Arts Vol. 5 No. 4 (2026): International Journal of Multidisciplinary Sciences and Arts, Article October 2
Publisher : Information Technology and Science (ITScience)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/ijmdsa.v5i4.9738

Abstract

Hand hygiene is a crucial measure for maintaining health and preventing the spread of germs through direct contact. Manual soap dispensers require users to touch specific parts of the container, thereby increasing the risk of cross-contamination. This study aims to design and build an automatic hand soap dispenser using an Arduino Uno and an ultrasonic sensor to minimize direct contact with the dispenser and enhance convenience and hygiene during use. The research employs the Hardware Development Life Cycle (HDLC) methodology, encompassing planning, requirements analysis, system and device design, development, testing, and implementation and maintenance. An Arduino Uno serves as the microcontroller, processing data from the ultrasonic sensor and controlling a relay connected to a DC pump. The ultrasonic sensor detects the presence of a hand within a preset range, prompting the Arduino Uno to signal the relay to activate the pump and automatically dispense the soap. Test results demonstrate that the device successfully detects hands via the ultrasonic sensor and automatically activates the pump according to the programmed logic. The designed device helps reduce the need for direct contact with the soap dispenser while offering a more practical and hygienic soap-dispensing process. Consequently, this automatic hand soap dispenser serves as a simple solution to support the practice of hand hygiene in daily life.
Real-Time Room Temperature and Humidity Monitoring Using DHT11 Sensor and Arduino Chafizul Akbar; Kemas Muhammad Wahyu Hidayat; Karnadi Karnadi
International Journal of Multidisciplinary Sciences and Arts Vol. 5 No. 4 (2026): International Journal of Multidisciplinary Sciences and Arts, Article October 2
Publisher : Information Technology and Science (ITScience)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/ijmdsa.v5i4.9750

Abstract

This study discusses the design and implementation of a real-time room temperature and humidity monitoring system based on an Arduino microcontroller and a digital DHT11 sensor. Ambient temperature and relative humidity are crucial factors affecting human health, comfort, and the operational stability of indoor electronic equipment. Traditional manual measurement methods are deemed inefficient because they fail to provide continuous, responsive data regarding environmental fluctuations. To overcome these challenges, this system was developed by utilizing the DHT11 sensor as a physical input device, while the Arduino board processes the collected data and displays it live on an LCD screen. The research methodology adopts an engineering approach, incorporating hardware integration, software programming, and prototype testing. Experimental evaluations were conducted across different daily time slots and applied to a case study monitoring a tempeh fermentation process over a 48-hour period. The test results demonstrate that the proposed system effectively provides stable, accurate, and real-time readings within the operational tolerance of the sensor. In conclusion, the system successfully replaces manual readings and offers a practical, low-cost solution for indoor environmental tracking with promising potential for future Internet of Things (IoT) expansion.
Design and Development of an IoT-Based Automatic Vehicle Security and Tracking System Using ESP3 Ristariyani Putri Rahayu; Karnadi Karnadi; Kemas Muhammad Wahyu Hidayat
International Journal of Multidisciplinary Sciences and Arts Vol. 5 No. 4 (2026): International Journal of Multidisciplinary Sciences and Arts, Article October 2
Publisher : Information Technology and Science (ITScience)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47709/ijmdsa.v5i4.9782

Abstract

Vehicle security is an important concern that requires practical and accessible monitoring solutions. Conventional vehicle security systems may have limitations in providing remote location information, making Internet of Things (IoT) technology a potential approach to improve vehicle tracking. This study aims to design and develop an IoT-based automatic vehicle security and tracking system using the ESP32 microcontroller and NEO-6M Global Positioning System (GPS) module. The research employed a Research and Development (R&D) approach consisting of literature study, system design, hardware and software implementation, system testing, and result analysis. The hardware integrates the ESP32 microcontroller with the NEO-6M GPS module through a UART serial interface, while Wi-Fi connectivity enables communication with the Telegram Bot API. The system was programmed using Arduino IDE to acquire GPS coordinates, process user commands, validate GPS status, and transmit vehicle location information through Telegram, including Google Maps links. Functional testing covered nine aspects: Wi-Fi connectivity, GPS initialization, GPS data acquisition, Telegram connection, command reception, GPS status validation, location transmission, message delivery, and user identification updates. Based on the results documented in the research report, all nine functional test items were recorded as passed according to their predefined test scenarios. These findings demonstrate that the developed prototype can integrate GPS positioning and Telegram-based communication for vehicle location monitoring. However, quantitative GPS accuracy, response time, power consumption, and long-term reliability were not measured in the reported tests. Further research is therefore needed to evaluate these performance parameters and improve the system's reliability under different environmental and network conditions.