cover
Contact Name
Risky Ayu Kristanti
Contact Email
ayukristanti@gmail.com
Phone
+6282153870439
Journal Mail Official
csue@tecnoscientifica.com
Editorial Address
Jalan Asem Baris Raya No 116 Kebon Baru, Tebet, Jakarta Selatan Jakarta 12830, Indonesia
Location
Kota adm. jakarta selatan,
Dki jakarta
INDONESIA
Civil and Sustainable Urban Engineering
Published by Tecno Scientifica
ISSN : -     EISSN : 28089200     DOI : https://doi.org/10.53623/csue.v1i1
The journal is intended to provide a platform for research communities from different disciplines to disseminate, exchange and communicate all aspects of basic and applied research involving three important divisions of Civil Engineering, Construction Management and Urban Engineering. The journal will focus on the dissemination of knowledge on both theoretical aspects and practical applications. It would be the platform for the diffusion of new and innovative methods, tools, techniques, technologies, and applications in different disciplines. Topics of specific interest include, but not limited to, are: Civil Engineering: Structure Engineering, Dynamics of Structures, Materials, Infrastructure Engineering, Geotechnical Engineering, Water Resources and Hydraulic Engineering. Construction Management: Project Management Planning, Cost Management, Time Management, Contract Administration, Safety Management, CM Professional Practice, construction materials and management, energy efficiency, energy in buildings, Sustainable Infrastructures, Sustainable Design & Construction, Building Information Modeling (BIM), Concrete Technology and Waste Research. Urban Engineering: Urban transportation, smart cities, Transportation planning, Sustainable transportation, active transportation, transport policy and applied soft computing for sustainable transportation.
Articles 85 Documents
Infiltration Control and Precipitation Management: Panacea for Soil Erosion, Erosion Wadis and Aggradation of Orogodo River in Agbor Metropolis Augustine Anyiam Oputa; Elvis Emifinoye; Reuben Ishiekwene; Kingsley Atusa; Martins Elusaiwe; Daniel Atabule Ogwu
Civil and Sustainable Urban Engineering Volume 6 - Issue 2 - 2026
Publisher : Tecno Scientifica Publishing & Society of Tropical Science and Technology

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i2.1166

Abstract

Globally, water is the most potent agent of soil erosion. Its potency at room temperature depends on the flow energy. Water induced soil erosion involve breakdown, and transport of broken-down soil aggregates from place of origin to where the displaced particles are deposited, thus stagnant water has very low erosive potentials. Currently, one of the major sources of colossal plagues in Agbor metropolis is soil degradation through soil erosion. Prominence of soil erosion in the metropolis is attributable to high infiltration density, severe rainfalls and long steep topography. This paper examines infiltrations, severe rainfall, topography and urbanization effects on soil erosion, and Orogodo River sustenance in Agbor metropolis. The metropolis mean annual precipitation (1787 mm) was estimated from Delta State annual rainfall data (2005‒2015). Curve number method and Pythagoras theorem apply to estimate the metropolis runoff volume and topography gradient. Newton’s laws of motion apply to estimate runoff acceleration, velocity, force, kinetic energy, and momentum. Volume of sediment deposits in Orogodo River for 28 years (1998−2026) was estimated using the rational method. Research findings reveal Agbor metropolis runoff potentials: flow volume, velocity, acceleration, kinetic energy, force, and momentum is [(779580863.3) m3, (2.5) m/s, (0.026) m/s2, (2.43619E+12) J, (20269102449) N and (3.82964E+13) kgms-1]. Outstanding runoff potentials and unethical waste management aggravate soil erosion, while debris transport downslope is fast sinking Orogodo River. Residents should establish samba and channel courtyard runoffs to it, adopt ethical waste management and provide drainage systems with concrete slab covers to prevent waste deposition into it.
Imperative and Profound Regulatory Efficacy: Engineering Panacea for Flood Mitigation in Lower Niger Floodplain/Riverine Communities, South-South Nigeria Augustine Anyiam Oputa; Elvis Emifoniye; Reuben Ishiekwene; Kennedy Chinedu Owuama; Kingsley Atusa; Martins Elusaiwe
Civil and Sustainable Urban Engineering Volume 6 - Issue 2 - 2026
Publisher : Tecno Scientifica Publishing & Society of Tropical Science and Technology

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i2.1168

Abstract

The Niger River and its flow channels constitute major cultural, drainage, and socioeconomic resources for riverine communities. However, widespread degradation of river valleys and floodplains in Nigeria has increased flood risks, particularly in the Lower Niger and Niger Delta. This study examined the causes, effects, trends, and control measures associated with flooding in Delta State floodplain communities. It analyzed rainfall patterns in the Niger River Basin, Niger River flow characteristics, population growth and urbanization trends in Nigeria from 1950 to 2023, and waste management practices. The findings revealed high annual rainfall across the Niger River Basin, with river flow and wet-season discharge strongly influenced by rainfall. Population growth, urbanization, infrastructure development, inadequate environmental conservation, and poor waste management have accelerated the degradation of river channels and floodplains. These conditions increase surface flow into adjacent low-lying areas, intensifying annual flooding. Flooding in Delta State was therefore attributed to the combined effects of intense rainfall, degraded river systems, and inadequate implementation and enforcement of environmental protection and urban planning policies. Effective flood mitigation requires restoration of the Niger River system, sustainable waste management, stronger enforcement of environmental regulations, improved administrative controls, and community-based behavioral management strategies.
Evaluating the Outputs of the Tourism Village Program Through the 4A Tourism Development Components: Evidence from East Manggarai Regency, Indonesia Waldenses Rojeri Babut; Agam Marsoyo
Civil and Sustainable Urban Engineering Volume 6 - Issue 2 - 2026
Publisher : Tecno Scientifica Publishing & Society of Tropical Science and Technology

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i2.1304

Abstract

The tourism village program became a key strategy of the Indonesian government to stimulate local economic growth through community-based tourism; however, its implementation in lagging regions was rarely evaluated systematically. This study aimed to evaluate the outputs of the tourism village program in three villages of East Manggarai Regency—Colol, Golo Loni, and Compang Ndejing—based on the four components of tourism destination development (4A): attraction, accessibility, amenity, and ancillary. A mixed-methods approach within a formative evaluation framework was applied. Data were collected through field observations, in-depth interviews, documentation, and questionnaires involving 45 purposively selected informants. Twenty-three sub-variables were assessed against predetermined ordinal indicators (Good, Fair, and Poor) and summarized using percentage-distribution descriptive analysis. The findings showed that the overall program outputs remained suboptimal: only 15.9% of the assessments were categorized as Good, 39.1% as Fair, and 44.9% as Poor. The attraction component performed relatively well (66.7% Fair), whereas accessibility was the weakest (66.7% Poor; 0% Good), with the availability of public transportation and parking areas rated as Poor in all villages. The ancillary component revealed a marked institutional gap between villages, recording the highest proportion of Good ratings (33.3%) alongside a high proportion of Poor ratings (44.4%). These results highlighted that infrastructure improvement and institutional strengthening should be prioritized so that the existing attraction and accommodation potentials could function as operational tourism products in moderately developed rural destinations.
A BIM-Informed Multi-Objective Work-Zone Scheduling Model for Improving Crew Continuity and Resource Stability in Multi-Story Building Projects Sultan Alkarawi; Firas Kh. Jaber; Aws S. Noaman
Civil and Sustainable Urban Engineering Volume 6 - Issue 2 - 2026
Publisher : Tecno Scientifica Publishing & Society of Tropical Science and Technology

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i2.1395

Abstract

Construction scheduling methods often lack effective integration of daily resource stability, work-zone sequencing, and specialist crew continuity, particularly in multi-story projects employing bottom-up floor sequencing. This study developed a BIM-informed multi-objective work-zone scheduling model to address these challenges. The model was applied to a five-story office building comprising 15 work zones and six repetitive activities, represented by 90 activity-zone records. The Non-dominated Sorting Genetic Algorithm II (NSGA-II) was employed to minimize work-package duration, cumulative crew idle time, and daily resource variation while satisfying precedence, crew exclusivity, non-preemption, workforce, workspace, concurrency, and bottom-up progression constraints. Ten independent runs were performed with a population size of 100 over 200 generations. The selected solution (168, 380, 219) achieved a work-package duration of 168 working days, cumulative crew idle time of 380 days, and a resource variation value of 219, representing reductions of 58.4%, 78.9%, and 18.6%, respectively, compared with sequential execution. An exhaustive evaluation of all 7,776 feasible sequences reproduced the same two-vector Pareto front, confirming the complete set of non-dominated solutions within the modeled search space. Sensitivity analysis identified crew efficiency and allowable zone concurrency as the primary factors influencing scheduling performance. The proposed model offers a practical decision-support tool for construction planners to balance project duration, crew continuity, and resource stability while maintaining a feasible and operationally interpretable bottom-up construction sequence.
Numerical Evaluation of Axial Capacity and Settlement of a Bored Pile Foundation for a Hospital Building Using Finite Element and AllPile Analyses Rashiqa Mutia Zahratunisa RH; Rudianto Surbakti; Salsabila Sahfa
Civil and Sustainable Urban Engineering Volume 6 - Issue 2 - 2026
Publisher : Tecno Scientifica Publishing & Society of Tropical Science and Technology

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i2.1402

Abstract

The performance of bored pile foundations for hospital buildings must satisfy both axial capacity and serviceability requirements, as excessive settlement may adversely affect structural and non-structural components, sensitive medical equipment, and overall building functionality. This study evaluated the axial bearing capacity and displacement response of a single bored pile at point P-86 of an Integrated Oncology Hospital Building project by comparing two numerical approaches, finite element method (FEM) analysis and AllPile Vertical Analysis, against field measurements obtained from a Pile Driving Analyzer (PDA) test. The investigated pile had a diameter of 0.80 m, an embedded length of 25 m, and a working load of 918 kN. Subsurface conditions were characterized using borehole BH-2 data, with groundwater encountered at approximately 10.5 m below ground level. The FEM analysis predicted an ultimate axial capacity of 985.98 tons and a displacement of 6.00 mm, whereas AllPile predicted an ultimate capacity of 1,365.21 tons, an allowable compressive capacity of 455.17 tons, and a settlement of 3.119 mm. In comparison, the PDA test indicated an ultimate capacity of 429 tons and a displacement of 7.60 mm. Relative to the PDA results, the FEM and AllPile ultimate capacities were higher by 129.83% and 218.23%, respectively, while the corresponding displacement differences were 21.05% and 58.96%. Thus, FEM provided predictions closer to the PDA results for both axial capacity and displacement, although a substantial discrepancy remained in the predicted ultimate capacity. The pile nevertheless satisfied the adopted working-load and serviceability requirements. These findings demonstrate that numerical predictions require site-specific calibration and validation against field measurements. Moreover, PDA-derived capacity should be interpreted as a dynamic field reference rather than as a direct substitute for conventional static pile load testing.
Performance Evaluation of Low-Density Polyethylene Food Packaging Waste as a Modifier in Performance Grade 70 Porous Asphalt Mixtures Mochamad Indra Ramadhan; Aditya Rizkiardi; Nurani Hartatik; Siti Sekar Gondoarum
Civil and Sustainable Urban Engineering Volume 6 - Issue 1 - 2026
Publisher : Tecno Scientifica Publishing

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i1.901

Abstract

Plastic waste, especially Low-Density Polyethylene (LDPE) from food packaging, poses significant environmental challenges due to its non-biodegradable nature and increasing accumulation. In road engineering, porous asphalt is known for its good drainage properties but has lower stability compared to conventional asphalt. This study evaluates the characteristics of porous asphalt mixtures modified with LDPE food packaging waste as a partial substitute for Performance Grade (PG) 70 asphalt. LDPE waste was sourced from the Pasar Pahing Rungkut Temporary Waste Disposal Site in Surabaya, processed, and incorporated into asphalt mixtures at 3%, 4%, and 5% of total weight. The Australian Asphalt Pavement Association was used as a guideline, and the optimum asphalt content (OAC) was determined to be 4.72%. Laboratory tests included Marshall stability, flow, Marshall Quotient (MQ), permeability, and volumetric properties (Voids in Mixture, Voids in Mineral Aggregate, and Voids Filled with Asphalt). The 5% LDPE mixture showed the best performance, with stability reaching 1101.1 kg, MQ of 930.5 kg/mm, and Voids in Mineral Aggregate (VMA) of 54.9%. All mixtures met Australian Asphalt Pavement Association (AAPA) permeability requirements, and the use of LDPE improved mechanical strength without compromising drainage properties. LDPE food packaging waste has potential as an eco-friendly modifier in porous asphalt, enhancing its stability and technical performance while contributing to sustainable waste management.
Performance Analysis of Porous Asphalt Incorporating Siwalan Fruit Shell Powder as Sustainable Filler Material Dharma Gusti Ramadhan; Aditya Rizkiardi; Nurani Hartatik; I Gede Agus Punarta
Civil and Sustainable Urban Engineering Volume 6 - Issue 1 - 2026
Publisher : Tecno Scientifica Publishing

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i1.904

Abstract

Porous asphalt is an open-graded combination with a lot of air voids that is meant to improve drainage on the surface. Nonetheless, the utilization of organic waste as an alternate filler remains inadequately investigated. This study seeks to assess the Marshall properties of porous asphalt utilizing siwalan (Borassus flabellifer) shell powder as a sustainable filler alternative. The study commenced with preliminary material testing (coarse and fine aggregates, PG 70 asphalt, and filler) in accordance with Bina Marga 2018 specifications, succeeded by laboratory evaluations of Marshall parameters, Asphalt Flow Down (AFD), and Cantabro Loss at asphalt contents of 4%, 4.5%, 5%, 5.5%, and 6%. The results showed that all of the materials met the required specifications. At 4% asphalt concentration, the Marshall stability was at its highest. As the asphalt percentage went up, the VIM and VMA went down, and the VFB went up. AFD results met AAPA (2004) criteria (≤0.3%) only when the asphalt content was 4% or 4.5%. The Cantabro Loss requirements were met when the asphalt content was between 4.5% and 6%. The best amount of asphalt was found to be 4% based on the VIM, AFD, and Cantabro Loss standards. These results indicate that siwalan shell powder is a technically feasible filler material in porous asphalt mixtures and promotes the sustainable utilization of organic waste. It is advisable to do additional research to evaluate the long-term efficacy of the mixture in real-world settings. The study suggests an effective method for encouraging environmentally friendly pavement building through the use of locally sourced waste materials.
A Systematic Literature Review of Hybrid Multi-Criteria Decision-Making and Technique for Order Preference by Similarity to Ideal Solution Methods for Construction Material Supplier Selection Fransiscus Xavirius Rizky Suryoaji Wibowo; Nectaria Putri Pramesti
Civil and Sustainable Urban Engineering Volume 6 - Issue 1 - 2026
Publisher : Tecno Scientifica Publishing

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i1.918

Abstract

Choosing the right supplier is critical in construction supply chain management, as it directly impacts cost, schedule, and material quality. This paper presents a systematic review of the integration of the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) with hybrid Multi-Criteria Decision-Making (MCDM) methods for building material supplier selection. Following the PRISMA procedure and quality assessment criteria adapted from CASP, JBI, and Kitchenham et al., only Scopus-indexed articles from 2020–2025 were considered. Out of 227 initial records, seven studies met all inclusion and quality criteria. Results showed increasing use of hybrid MCDM approaches, primarily in Asian contexts. Common weighting techniques included the Analytic Hierarchy Process (AHP), Best–Worst Method (BWM), and rough set theory, while advanced methods such as Rough–Dombi BWM, game-theoretic approaches, fuzzy–rough systems, and Entropy–G1 weighting were used to handle uncertainty and complex decision problems. Fuzzy-based representations, particularly Triangular Fuzzy Numbers, were widely employed, with evaluation criteria focused on cost, quality, risk, sustainability, and delivery performance. Hybrid MCDM–TOPSIS frameworks generally produced more consistent and structured decision outcomes. However, findings are limited due to the small number of studies. Key research gaps include insufficient empirical validation in developing-country contexts, limited incorporation of sustainability factors, and practical challenges related to data quality and computational complexity. Future research should prioritize real-world applications, integrate sustainability more thoroughly, and develop user-friendly decision-support tools for construction practitioners.
The Application of Content Validity Index in Identifying and Validating Material Delay Risks in Sorong Construction Projects Yohanes Deocaeso Nataputra Prayogo; Nectaria Putri Pramesti
Civil and Sustainable Urban Engineering Volume 6 - Issue 1 - 2026
Publisher : Tecno Scientifica Publishing

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i1.938

Abstract

Material delays remained one of the most critical challenges affecting the performance of construction projects in Sorong, Southwest Papua, where geographical isolation, limited logistics capacity, and supply-chain disruptions frequently extended project timelines. This study aimed to identify and validate a context-specific list of material delay risks by applying the Content Validity Index (CVI) to ensure that the selected risk indicators accurately represented the conditions of construction projects in the region. A descriptive–qualitative approach was employed, involving eight experts with a minimum of five years of experience in construction project management in Southwest Papua. Twenty-nine risk events and twenty risk agents derived from the literature were assessed using a 1–4 relevance scale. The results indicated that 14 risk events and 13 risk agents achieved acceptable validity, with I-CVI values ranging from 0.88 to 1.00. The high S-CVI/Ave (0.98) and S-CVI/UA (0.87 for risk events; 0.86 for risk agents) demonstrated strong consensus among experts and confirmed the robustness of the research instrument. These findings suggested that the validated risk list accurately reflected dominant material delay issues in Sorong and was appropriate for subsequent quantitative risk analysis. The validated items were further interpreted as essential inputs for the next phase of research, particularly in applying Failure Mode and Effect Analysis (FMEA) and the House of Risk (HOR) to prioritize dominant risk agents and develop targeted mitigation strategies. This study recommended broadening expert representation in future validations and integrating digital early-warning systems to strengthen material management practices in the region. The validated risk framework provided practical implications for contractors, policymakers, and supply-chain stakeholders in improving project reliability in Sorong.
Evolution of Drainage Treatment in Flexible Pavement Design: Evolution of Drainage Treatment in Flexible Pavement Design: A Comparison of Three Generations of Design Methods Y. Djoko Setiyarto; Mochamad Wildan Pratama Augustiawan
Civil and Sustainable Urban Engineering Volume 6 - Issue 1 - 2026
Publisher : Tecno Scientifica Publishing

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53623/csue.v6i1.954

Abstract

Drainage played a crucial role in flexible pavement performance because moisture accumulation reduced material stiffness, accelerated fatigue cracking, and shortened service life. Along with the evolution of pavement design practice in Indonesia, the concept of drainage shifted from empirical correction toward a mechanistic–empirical system-based design approach. This study examined the evolution of drainage treatment in flexible pavement thickness design by comparing three generations of design methods: the 1993 American Association of State Highway and Transportation Officials (AASHTO) method, the 2017 Indonesian Pavement Design Manual, and the 2024 Indonesian Pavement Design Manual. Quantitative simulations were conducted for the first two methods under three drainage conditions (good, moderate, and poor) to evaluate the influence of drainage on pavement thickness. The 2024 manual was analyzed conceptually because it no longer applied numerical drainage correction but instead emphasized physical drainage system design. The results showed that deterioration of drainage quality from good to poor increased total pavement thickness by approximately 43.2% in the 1993 method and 43.75% in the 2017 manual. In contrast, the 2024 manual did not apply numerical thickness correction, as drainage effects were addressed through permeable layers and subsurface drainage systems. This study demonstrated a paradigm shift from empirical corrective design toward preventive mechanistic–empirical drainage design and discussed its relevance to international pavement engineering practice in moisture-sensitive and tropical environments.