cover
Article Per Year (5 Year)
All
Home Page
OAI Link
Editorial Team
Contact
Reviewer
Google Scholar
Contact Name
Aswin Lim
Contact Email
aswinlim@unpar.ac.id
Phone
-
Journal Mail Official
igj.isge@gmail.com
Editorial Address
Graha HATTI Jl. Asmin No. 45, Kelurahan Susukan, Kecamatan Ciracas Jakarta Timur - Indonesia 13750
Location
Unknown,
Unknown
INDONESIA
Indonesian Geotechnical Journal
Published by Himpunan Ahli Teknik Tanah Indonesia
ISSN : -     EISSN : 28297520     DOI : https://doi.org/10.56144/igj.v1i3
Core Subject : Science,
Earth & Planetary Sciences
As all geotechnical engineers are aware of, soil behaviour can vary significantly from places to places. Design methodologies available in existing literature, especially on correlations of soil investigation and soil parameters, may not apply to local conditions. It is necessary to tailor well-established knowledge to the geotechnical problems related to Indonesia. The Indonesian Geotechnical Journal aims to address this problem by providing an open-access peer-reviewed journal. This journal provides a platform for authors to publish their state-of-the-art knowledge for practicing engineers as well as the academic society. Although the Indonesian Geotechnical Journal is intended to provide an outlet for Indonesia geotechnical research, suitable contributions from other countries will be most welcomed. Indonesia has a very complex geology, a meeting point of two continental plates and two oceanic plates. This means that the soil conditions in different part of Indonesia can vary greatly. Being at the meeting point of tectonic plates also mean that Indonesia, in addition to earthquake prone, has hilly and mountainous terrains. Further aggravating the conditions, Indonesia has a tropical climate, meaning high rainfall. Hilly terrain with high rainfall and earthquake is a recipe for slope failures. Mitigation of slope failure is something sought throughout Indonesia. Indonesia also has significant soft soil problems, with the fast-paced development of infrastructure in the recent years, various ground improvement techniques were adopted. The success and not so successful stories can be shared through the Indonesian Geotechnical Journal. Allowing exchange of knowledge and experience to enable engineers to build a better Indonesia. The scopes of topics include soil and rock mechanics, material properties and fundamental behaviour, site characterization, foundations, excavations, tunnels, dams and embankments, slopes, landslides, geological and rock engineering, ground improvement, bio-geotechnics, Geotechnical earthquake engineering, liquefactions, waste management, geosynthetics, offshore engineering, risk and reliability applications, physical and numerical modelling, and case-history.
Arjuna Subject : Ilmu Bumi dan Planet (semua kategori) - Teknik Geologi dan Geologi Teknik
Articles 70 Documents
 3   4   5   6   7 
Seismic Safety Evaluation of Mechanically Stabilized Earth (MSE) Wall for Highway Construction Rizali, Muhammad Adi Ibrahim; Yusep Muslih Purwana
Indonesian Geotechnical Journal Vol. 3 No. 2 (2024): Vol. 3, No. 2, August 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i2.78

Abstract

The usage of Mechanically Stabilized Earth (MSE) Walls has grown in popularity over the last few decades and has been widely used in many countries for highway construction, including Indonesia. As a country with a high risk against seismic hazards, a considerable stability analysis against earthquakes for construction must be conducted. This paper is directed to evaluate the static and seismic stability of MSE wall by adopting design criteria from SNI 8460:2017 using the pseudo-static approach with Limit Equilibrium Method (LEM) which modelling earthquake as a seismic coefficient, a one-way constant load and dynamic response approach with Finite Element Method (FEM) which modelling earthquake as ground motion, a fluctuating load which varies in time. The stability analysis is performed by considering three failure mechanisms that mostly occurred in MSE Walls; base sliding, tensile overstress, and slope failure. The earthquake load is modelled based 1000-year return period earthquake. Based on the analysis result, the most potential failure mechanism that may occur in the MSE wall is tensile overstress, while the least potential failure is base sliding. The analysis result also shows that the finite element method obtained higher safety factors compared to limit equilibrium, while on the other hand, the remaining two failure mechanisms shows the different result, with the finite element method obtaining lower safety factors than limit equilibrium. Modelling seismic load as an accelerogram indicates that earthquakes have higher impacts on structure stability compared to seismic coefficient, based on seismic safety factor reduction of each method. Although show differences in the value of the safety factor, the minimum safety factor required still complies with both methods.
Fiber-reinforcement MICP for Durability Improvements Daryono, Lutfian Rusdi; Abe, Tomohiko; Kano, Masanao; Nakashima, Kazunori; Kawasaki, Satoru
Indonesian Geotechnical Journal Vol. 3 No. 2 (2024): Vol. 3, No. 2, August 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i1.79

Abstract

Microbially Induced Carbonate Precipitation (MICP) technology, a method for soil enhancement, has recently garnered considerable attention within geotechnical communities. This study places a significant focus on addressing the paramount concern pertaining to the endurance of MICP-treated specimens. The research centers on MICP-treated samples fortified with plant-derived natural fibers, specifically jute. It evaluates their robustness when subjected to exposure to both distilled water (DW) and artificial seawater (ASW). The primary objectives encompass acquiring a comprehensive understanding of their prolonged performance under varied conditions, appraising the consequences of fiber reinforcement, and augmenting the suitability of MICP-treated samples for applications in the safeguarding of coastal regions against erosion. The investigation subjected these specimens to 12 wetting-drying cycles utilizing artificial seawater following treatment periods of 5 days, 7 days, and 14 days. The findings unveiled an approximate 8.5% diminution in sample mass, with the fibers constituting 2% of the sand's total weight. Moreover, the study underscores the adeptness of the integrated fiber in withstanding the wetting-drying (WD) cyclic process, amplifying the mechanical and physical attributes of the fiber-reinforced MICP-treated specimens, thus contributing significantly to their overall durability.
Investigation on the Effects of Different Concentration of CO2 Gas Injected into Fresh Cement Paste Along with the Addition of Superplasticizer on the Mechanical Properties of Cement Soesilo, Egy Crystal; Putera, Muhammad Akmal; Daryono, Lutfian Rusdi; Abe, Tomohiko
Indonesian Geotechnical Journal Vol. 3 No. 2 (2024): Vol. 3, No. 2, August 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i2.95

Abstract

This paper focused on examining the impact of injecting varying concentrations of carbon dioxide (CO2) gas on the mechanical characteristics of both the fresh and hardened states of cement paste. This study also considered the influence of the presence or absence of polycarboxylate superplasticizer in cement mixture on these properties. Many researchers discovered the benefit of CO2 gas utilization in cement mixture to accelerate the early strength of cement or concrete hydration by its carbonation that form calcium carbonate (CaCO3). The application method is to directly inject CO2 gas in a curing chamber for air-curing of precast concrete. Alternatively, carbonated water is mixed with cement during concrete mixing. However, the use of CO2 gas does not significantly improve the 28-day strength of concrete. This study explores how to improve the carbonation impact on mechanical properties of cement paste and apply it to ground improvement. In this study, the method adopted is direct injection of  CO2 gas during cement slurry mixing with different injection duration. The influence of CO2 in the presence of superplasticizer (SP) in cement slurry was also studied as SP is generally used for grouting. The results showed that the carbonation of cement paste with additional of superplasticizer significantly affect its flow, viscosity and bleeding properties. Unlike samples with SP addition, the samples without SP addition showed higher compressive strength after 28 days of curing up to certain CO2 injection time. For all CO2 gas injection time, smaller porosity rates were observed for 7-day cured samples with SP addition compared to those without SP addition. This is due to accelerated carbonation due to SP presence in cement mixture. From the results, the optimum of CO2 gas injection time for one liter mixture of cement paste to improve its compressive strength (up to 123% increase) have been discovered. It can be inferred that the addition of superplasticizer in cement slurry reduces the amount of CO32- ions and Ca2+ ions during carbonation process of cement hydration products, which are strongly related to the pH level in pore solution. These ions play a significant roles in determining the mechanical properties of cement slurry.
Deep Neural Networks for Predicting the Settlement of Earth Dams Based on the InSAR Outputs Amirhossein Babaei; Sadeghi, Hamed; Zahra Ghorbani
Indonesian Geotechnical Journal Vol. 3 No. 2 (2024): Vol. 3, No. 2, August 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i2.102

Abstract

Earth dams play a crucial role in water resource management, necessitating effective maintenance to ensure prolonged functionality and safety. Monitoring these dams traditionally involves methods such as surveying and instrumentation. However, challenges arise from equipment malfunctions and absences, especially in dams affected by environmental changes. In response to these challenges, the cost-effective and adaptable nature of Interferometric Synthetic Aperture Radar (InSAR) has made it a preferred choice for monitoring. Despite their advantages, traditional numerical models like finite element methods have limitations in predicting deformation comprehensively, particularly due to intricate, non-linear correlations involving material type and environmental conditions. To overcome these limitations, this research employs deep learning techniques, specifically Long Short-Term Memory (LSTM) network, to capture intricate relationships and accurately predict dam behavior. Time series data from InSAR, representing settlement, are decomposed into trend and seasonal components using Artificial Neural Networks (ANN) for trend prediction. Furthermore, an LSTM network is utilized to handle the complexity of the seasonal component and its correlation with environmental factors. This network incorporates settlement, precipitation, temperature, and reservoir water level time series as inputs, thereby enhancing prediction accuracy. The research outcome presents a robust solution that holds the promise of increased accuracy and efficiency in predicting, monitoring, and serving as an early warning system for earth dam deformations over time. Such advancements are crucial for ensuring the safety and integrity of critical infrastructure in the face of evolving environmental conditions.
Case Study of Double-Wall Retaining Wall System for Deep Excavation in Jakarta, Indonesia Anthony, Anthony; Wahyuningtyas, Indah Sri; Farkhantiansyah, Aggie
Indonesian Geotechnical Journal Vol. 3 No. 3 (2024): Vol. 3, No. 3, December 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i3.103

Abstract

This paper presents a case study of diaphragm wall behavior in a deep excavation project under double-wall condition. A double-wall condition occurs when two layers of diaphragm wall, either side by side or with gaps between them, are used as a retaining wall system. The project discussed in this paper is located in a soft clay area of Jakarta, Indonesia, with a main excavation depth of approximately 33 meter and a side excavation depth of 23 meter. The project utilizes the top-down construction method, where the retaining walls for both the main and side structures are initially built before the excavation begins, creating the double wall condition. However, due to site issues, main excavation activities commenced after the construction of the main structure wall but before the side structure wall was completed, changing the plan to a single-wall condition. The behavior of the main structure wall under both single-wall and double-wall condition is studied. The study simulated two separate FEM models to evaluate the sequence of construction up to the final excavation level of the main station. According to the analysis result, single wall condition has relatively larger deformation than double wall condition. However, the wall bending moment did not change much, meaning that double-wall did not contribute effectively towards providing higher stiffness. The results contradict the initial assumption that the double-wall condition would be more advantageous for the main structure wall design than single-wall condition. Several critical parameters were found to significantly influence the outcome. The findings of this case study can provide valuable insights for the preliminary design of future excavation projects.
Evolution of Crushing Surface of Ta-d Pumice in Triaxial Compression Tests Sato, Itsuki; Kuwano, Reiko; Otsubo, Masahide; Mohri, Atsushi
Indonesian Geotechnical Journal Vol. 3 No. 3 (2024): Vol. 3, No. 3, December 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i3.104

Abstract

Crushable porous granular materials like volcanic pumice, distributed worldwide, cause various engineering problems, including slope hazards. These materials are often classified as problematic soils due to their complex mechanical properties, which arise from high compressibility and changes in grain size due to particle crushing. Consequently, their behaviour is typically discussed on a case-by-case basis, and a systematic understanding has yet to be established. This study aims to elucidate the relationship between the mechanical properties and particle crushing of porous granular materials through a series of tests on natural volcanic pumice. The intra-particle void ratio was measured alongside isotropic consolidation and CD/CU triaxial compression tests, with particle crushing assessed before and after the experiments. The results indicate that the intra-particle void ratio correlates with particle size, with larger particles generally having higher porosity. Additionally, the mechanical behaviour of these materials shows high compressibility, and their stress paths resemble those obtained from undrained triaxial tests on loose sand, ultimately reaching the critical state. The relationship between the amount of particle crushing and mean effective stress at the end of the tests can be represented by a single curve for isotropic consolidation tests, CD, and CU triaxial tests, respectively. The amount of crushing generally increases with the progression of axial strain during the compression process, and in CU tests, when reaching the critical state, no further increase in crushing occurs with increased axial strain. Furthermore, critical state and isotropic consolidation state of each material can be represented on its own unique surface, each referred to as a "Crushing Surface," defined by the crushing volume, void ratio, and mean effective stress for that specific soil.
Influence of Sugarcane Bagasse Biochar Amendment on Low Plastic Clay Soil Performance: A Novel Approach for Geotechnical and Geo-environmental Applications Yadav, Shailesh Kumar; Raj, Amrit; Bag, Ramakrishna
Indonesian Geotechnical Journal Vol. 3 No. 3 (2024): Vol. 3, No. 3, December 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i3.105

Abstract

The application of biochar in geotechnical and geoenvironmental engineering remains relatively understudied, particularly concerning its impact on soil properties when mixed with sugarcane bagasse. This study investigates the influence of sugarcane bagasse-derived biochar on the strength and water retention behavior of low plastic clay soil, representing a novel contribution to the field. Biochar, a carbon-rich material produced by the pyrolysis of organic biomass, has garnered attention for its potential to enhance soil properties and mitigate environmental challenges. Five different percentages of bagasse biochar (0%, 1%, 2%, 3.5%, and 5%) were incorporated into the low plastic clay soil to prepare biochar-amended soil specimens. Unconfined compressive strength and water retention tests were conducted to evaluate the mechanical and hydraulic properties of the amended soils. The findings reveal that the water retention capacity of the biochar-amended soil increased with the addition of bagasse biochar. This observation suggests that biochar incorporation enhances the soil's ability to retain moisture, potentially beneficial for mitigating soil moisture fluctuations and supporting plant growth in geoenvironmental applications. Furthermore, the study also highlights a positive impact on the strength properties of the soil with a 22.1% increase for 1% biochar content compared to no-amended after 28 days. This increase in strength was attributed to changes in soil structure, pore distribution, and inter-particle bonding induced by the presence of biochar. In conclusion, Biochar amendment offers potential for enhancing soil water retention and strength properties and the use of sugarcane bagasse-derived biochar in low plastic clay soil presents promising opportunities for geoenvironmental engineering applications.
Physical and Numerical Modelling of Rockwool Insulated Landfill Liner Materials as a Heat Mitigation Method Widjaja, Emmanuella Stephanie; Ahmad, Afnan; Kumar, Manoj; Anggraini, Vivi
Indonesian Geotechnical Journal Vol. 3 No. 3 (2024): Vol. 3, No. 3, December 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i3.106

Abstract

The growing global amount of waste emphasizes the urgency of effective landfill management. The large amount of organic matter in landfill liners undergoes rapid biodegradation, generating significant heat. This heat production can cause various environmental issues, such as the release of volatile organic compounds, an increased risk of groundwater contamination from leachate migration, unpleasant odors, and a reduction in the structural integrity of the landfill liner. Therefore, efficient heat mitigation methods in landfill liners are crucial for minimizing detrimental environmental effects. Utilizing insulation material in landfills can be an effective and novel method in the environmental geotechnical field while promoting material sustainability. This study aims to evaluate the effectiveness of rockwool as an insulation material in reducing heat transfer inside landfill liners. The effectiveness of rockwool was assessed by using both physical and numerical modelling with varying thicknesses of rockwool, moisture conditions, and elevated temperatures in the landfill liner system. The insulated landfill liner system was simulated numerically using ANSYS software. A wooden box prototype was built to simulate a real-life insulated landfill liner system to evaluate the feasibility of insulation material as a heat mitigation method in landfills. The findings suggest that rockwool is effective in mitigating the heat in landfill liners. Overall, rockwool reduced the elevated temperatures up to 48.45% despite the system being wet which reduces the effectiveness of insulation performance. Comparatively, the 20 mm rockwool was efficient in minimizing average level of elevated temperatures, meanwhile, rockwool with thicknesses of 35 mm and 50 mm were needed to attenuate extremely elevated temperatures. These results were demonstrated through numerical simulation and validated by physical modelling results. It can imply an effective method for mitigating heat in landfill liners, which advances the development of environmental geotechnics for sustainable waste management.
Investigation of a Notable Landslide under Complex Hydrogeological Conditions at Pak Tam Road, Sai Kung, Hong Kong Lam, Kevin Siu Pang; Tracy, Michael Rudolf
Indonesian Geotechnical Journal Vol. 3 No. 3 (2024): Vol. 3, No. 3, December 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i3.107

Abstract

On 8 June 2022, an intense rainstorm triggered multiple landslides in the northeastern area of Hong Kong. One of these landslides occurred at the registered soil and rock cut slope adjoining Pak Tam Road in the Sai Kung East Country Park with significant social consequences and widespread media attention. An investigation of this notable landslide was undertaken to study the probable causes and mechanism of the failure, as well as the hydrogeological conditions of the slope. The landslide was a large‑scale rain‑induced sliding failure caused by adversely orientated relict joints within the weathered rock profile. Coupling effects of inadequate slope maintenance, steep slope profile and tension cracks rendered the slope particularly vulnerable to landsliding under severe rainfall. Additionally, heavy seepage was observed from some weep holes within the same slope, which suggested the presence of complex hydrogeological conditions. Field mapping and site‑specific ground investigation revealed preferential flow paths along a network of soil pipes and relict joints in the groundmass that prompted the subsurface flow and the build-up of a transient perched groundwater table. The landslide highlighted the importance of proper and regular slope maintenance of slopes in Hong Kong, and the need of assessing the site holistically when modifying the site with engineering works. A robust design solution is strongly advocated for stabilising slopes.
Shaking Table Tests on Geocell-Based Countermeasures against Pipe Flotation Nagatani, Taishi; Ikebata, Ruka; Sonoda, Yusuke; Ito, Shuji; Sawada, Yutaka
Indonesian Geotechnical Journal Vol. 3 No. 3 (2024): Vol. 3, No. 3, December 2024
Publisher : Himpunan Ahli Teknik Tanah Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.56144/igj.v3i3.108

Abstract

This study investigates the effectiveness of the geocell-based countermeasures against pipe flotation in liquefied ground using shaking table tests. Liquefaction-induced pipe flotation is a significant issue, particularly for agricultural pipelines, which are often installed in areas with high groundwater level. A conventional method, such as using geotextiles combined with gravel, is effective in mitigating this problem. However, the conventional method includes challenges in terms of workability, presenting a need for more efficient solutions. We propose a novel approach that employs geocells to enhance resistance against pipe flotation while potentially reducing labor costs. Geocells, which can be transported in a compact form and expanded on-site, are filled with soil or gravel to form a robust reinforcement around the pipe. This method is expected to offer significant advantages in terms of ease of installation and overall cost-effectiveness. To validate the effectiveness of the proposed method, we conducted shaking table tests using an aluminum pipe buried in saturated sand within a steel container. In this study, four different experimental cases were conducted: an unreinforced case, a case for the conventional geotextile method, and two cases for the geocell reinforcement. For the two cases with geocell reinforcement, the two experimental conditions were varied in the method of fixing the geocells and in the backfill material around the pipe. The results demonstrated that all conventional and geocell-reinforced methods significantly reduced pipe flotation compared to the unreinforced method. Compared to the unreinforced case, the case for the geocell reinforcement reduced pipe flotation by 24.6 times, and the conventional method reduced it by 13.6 times. In conclusion, the proposed method using geocells to prevent pipe flotation in liquefied ground has been confirmed as an effective alternative to the conventional method. This study provides a practical and labor-saving solution for improving the seismic resistance of buried pipelines in earthquake-prone areas.

Page 6 of 7 | Total Record : 70

 3   4   5   6   7 

Filter by Year

2022 2025


Reset
Filter By Issues
All Issue Vol. 4 No. 2 (2025): Vol. 4, No. 2, August 2025 Vol. 4 No. 1 (2025): Vol.4, No .1, April 2025 Vol. 3 No. 3 (2024): Vol. 3, No. 3, December 2024 Vol. 3 No. 2 (2024): Vol. 3, No. 2, August 2024 Vol. 3 No. 1 (2024): Vol. 3, No. 1, April 2024 Vol. 2 No. 3 (2023): Vol. 2, No. 3, December 2023 Vol. 2 No. 2 (2023): Vol.2 , No.2, Agustus 2023 Vol. 2 No. 1 (2023): Vol.2 , No.1, April 2023 Vol. 1 No. 3 (2022): Vol.1 , No.3, December 2022 Vol. 1 No. 2 (2022): Vol.1 , No.2, August 2022 Vol. 1 No. 1 (2022): Vol.1 , No.1, April 2022 More Issue