Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

Bulletin of Electrical Engineering and Informatics

EEI
Website

Published by Universitas Ahmad Dahlan

ISSN : - EISSN : - DOI : -

Core Subject : Engineering,

Electrical & Electronics Engineering

Bulletin of Electrical Engineering and Informatics (Buletin Teknik Elektro dan Informatika) ISSN: 2089-3191, e-ISSN: 2302-9285 is open to submission from scholars and experts in the wide areas of electrical, electronics, instrumentation, control, telecommunication and computer engineering from the global world. The journal publishes original papers in the field of electrical, computer and informatics engineering.

Arjuna Subject : -

Articles 2,901 Documents

51 52 53 54 55

Community reporting system: road violation M. R. Roslan; Suriza Ahmad Zabidi
Bulletin of Electrical Engineering and Informatics Vol 8, No 4: December 2019
Publisher : Institute of Advanced Engineering and Science

In the era of internet and wireless, an online community reporting system that is easy to use and hustle free is much needed to allow the user to place a misconduct report to the relevant authority. The available system is inefficient and time-consuming since mostly are using web-based which makes the user unwilling to make a report to the authority. The objective of this project is to design a system using android application that is cost-effective and easy to use. The scope of this project is on the road violation reporting system. The outcome of the system will provide a user with an easy reporting system and also the authority can manage the report easily. The development of the system is expected to enhance the reporting system and betterment for the community as well as the authority as a whole.

Video streaming over Ad hoc on-demand distance vector routing protocol Othman O. Khalifa; Diaa Eldin Mustafa Ahmed; Aisha Hassan Abdalla Hashim; Mudathir Yagoub
Bulletin of Electrical Engineering and Informatics Vol 8, No 3: September 2019
Publisher : Institute of Advanced Engineering and Science

Video streaming is content sent in compressed form over the netwoks and viwed the users progressively. The transmission of video with the end goal that it can be prepared as consistent and nonstop stream. The point is that to give client support to client at anyplace and at whatever time. Mobile Ad hoc Networks (MANETs) are considered an attractive nertwork for information transmission in many applications where the customer programme can begin showing the information before the whole record has been transmitted. Ad hoc On-demand Distance Vector (AODV) protocol is considered as one of the most important routing protocols in MANET. However, routing protocols assume a crucial part in transmission of information over the network. This paper investigates the performance of AODV Routing Protocol under video traffic over PHY IEEE 802.11g. The protocol model was developed in OPNET. Different outcomes from simulation based models are analyzed and appropriate reasons are also discussed. A different scenarios of video streaming were used. The metric in terms of throughput, end to end delay, packet delivery ratio and routing overhead were measured. A comparision with GRP and GRP are also reported.

On the analysis of received signal strength indicator from ESP8266 Rafhanah Shazwani Rosli; Mohamed Hadi Habaebi; Md Rafiqul Islam
Bulletin of Electrical Engineering and Informatics Vol 8, No 3: September 2019
Publisher : Institute of Advanced Engineering and Science

Recently, the concept o Internet of Things has gained a tremendous momentum in the technological world. Internet of Things efficienty connects devices hence improving their quality of life from various aspects. One of the most heavily used device for Internet of Things application is ESP8266 WiFi serial transceiver module. It features access to the Received Signal Strength Indicator readings from the module. In this paper, a characteristic analysis of the Received Signal Strength Indicator readings collected using ESP8266 WiFi serial transceiver module is carried out. The aim is to explore the future possibilities of Received Signal Strength Indicator value as a stand-alone and unique parameter to be used in various applications especially in the domain of Internet of Things. In addition, the potential of the cheap yet sophisticated ESP8266 WiFi serial transceiver module is also highlighted. The findings have shown an insight into the characteristics of Received Signal Strength Indicator readings and how it can be utilized for other different purposes. The findings have brought up a few stimulating issues that may arise from some implementation of Received Signal Strength Indicator readings such as the significant effect of obstruction in the Line of Sight. However, its solution will thrust the Internet of Things’ technological advancementsahead.

Investigation of time diversity gain for earth to satellite link using rain rate gain Md. Moktarul Alam; Islam Md. Rafiqul; Khairayu Badron; Farah Dyana A. R.; Hassaan Dao; M. Rofiqul Hassan; Ali Kadhim Lwas
Bulletin of Electrical Engineering and Informatics Vol 8, No 3: September 2019
Publisher : Institute of Advanced Engineering and Science

The utilization of satellites for communication systems has expanded considerably in recent years. C and Ku-bands of frequencies are already congested because of high demand. Future directions of satellite communications are moving towards Ka and V-bands. Earth to satellite communications are moving towards higher frequency bands in future which are more sensitive to environment. Rain causes severe degradation in performances at higher frequency bands specially in tropical regions. Several mitigation techniques are proposed to design reliable system. Time diversity is one of the potential candidate for it. However, time diversity analysis requires measured rain attenuation data. For future high frequency link design those data are not available at most of the places. This thesis proposes a method to utilize 1-minute rain rate to analyze time diversity technique at any desired frequency. This paper proposes a method to utilize 1-minute rain rate to analyse time diversity rain rate gain. In proposed method, it is assumed that rain rate gain with delay can represent rain attenuation gain with delay for same period of time at same location. The characteristics of rain rate and rain attenuation almost same because the attenuation causes due to rain. One year measured rain rate in Malaysia is used to predict rain rate gain. The measured gain at 12.225 GHz signal is compared with that predicted by ITU-R based on rain rate measurement and is found good agreement. Hence it is recommended that the time diversity gain can be predicted using measured rain rate for any desired frequencies.

Modeling and development of radio frequency planar interdigital electrode sensors Muhammad Farhan Affendi bin Yunos; Anis Nurashikin Nordin; Anwar Zainuddin; Sheroz Khan
Bulletin of Electrical Engineering and Informatics Vol 8, No 3: September 2019
Publisher : Institute of Advanced Engineering and Science

The interdigital sensor has been implemented in various field of applications such as microwave device, chemical sensor and biological sensor. This work describes the design and fabrication of an interdigital sensor (IDS) design that has the potential of estimating blood glucose levels using capacitive measurements. The IDS was first designed using theoretical equations and later was optimized by using CST Microwave Studio®. The electrode widths of the sensor were varied from 0.5mm to 0.7mm and the S11 reflection characteristics were simulated.Upon completion of simulations, the sensor was fabricated using copper clad FR4 boards. The fabricated sensors were measured using a vector network analyzer (VNA) and produced resonance frequencies of 2.02, 2.11 and 2.14 GHz. The highest Q obtained was 11.72 from the 2.11 GHz sensor.

Smartphone aided real-time blood vein detection system Istiaque Ahmed, Kazi; Hadi Habaebi, Mohamed; Islam, Md. Rafiqul
Bulletin of Electrical Engineering and Informatics Vol 8, No 3: September 2019
Publisher : Institute of Advanced Engineering and Science

This paper aims to develop a real-time integrated system for the detection of the blood vein utilizing an Android Mobile App. The system is intended to be a low cost solution for medical teams at clinics, emergency rooms and hosptials. The system reduces the enjuries incurred due to inaccuracies during the process of frequent needle injection when blood vein is not visible during patientâ€™s skin inspection. Illuminated infrared light in the blood cells of the vein is absorbed due to the manifestation of the Haemoglobin in blood and the IR non-blocking camera can capture the vein patterns in the IR light spectrum. Contrast Limited Adaptive Histogram Equalization (CLAHE) algorithm was used to enhance the pattern of the vein in the Android application developed using OpenCV3. Developed system can detect the veins up to 7mm underneath of human skin in real time with a frame rate of 25fps. This is a far better improvement than commercial systems that can detect veins only below 10mm underneath the skin. Moreover, this system not only focused on needle infusion but also it can be used to indicate the place of bleeding for the clots from the human body strokes, etc. in the upper layer of skin. It can also be used to detect and measure liquids in encapsulated in confined dark bottles, for example, liquid chemical pouring into the bottles in the chemical companies, liquid medicine pouring to bottles, etc. The system can be further developed to detect skin infection and other dermatological diseases underneath the skin.

Capacitive electrode sensor implanted on a printed circuit board designed for continuous water level measurement Salami Ifedapo Abdullahi; Mohamed Hadi Habaebi; Noreha Abdul Malik
Bulletin of Electrical Engineering and Informatics Vol 8, No 2: June 2019
Publisher : Institute of Advanced Engineering and Science

Water level sensors are one of the practical ways to get the actual measurement of the depth of a dam or canal. The ease of deployment and easy data acquisition makes them widely used in many fields. Therefore, it will be advantageous to have a miniaturized water level sensor for easier mobility and deployment. A novel method for measuring water level using a Printed Circuit Board has been proposed in this paper. The design stages of circuit sketching, printing of sketch on PCB and etching are discussed for the electrode water level sensor. A signal conditioning circuit is necessary to maintain a steady flow of current from the power source. The fabricated electrode water level sensor was tested based on its capacitive effect while charging up and the amount of current at each electrode finger at the saturation stage. The hardware enablers for this test were the multimeter and LCR meter. Arduino microprocessor was used to test and measure the transient response time for each electrode finger. The transient response sensitivity of the electrode sensor is measured to be 0.0873 millisecond/cm while the resolution of the electrode sensor is 0.1cm over a range of 30cm water level. A multiple correlation of 0.921 was achieved for the water level, measured current and measured capacitance with P-values less than 0.05 indicating strength of the data obtained from the tests conducted. The result showed strong evidence that the electrode water level sensor can be an alternative method of measuring water level.

Design and optimize microstrip patch antenna array using the active element pattern technique Khamis Ali; Norun Abdul Malek; Ahmad Zamani Jusoh; Sarah Yasmin Mohamad; Zuhairiah Zainal Abidin; Ani Liza Asnawi
Bulletin of Electrical Engineering and Informatics Vol 8, No 3: September 2019
Publisher : Institute of Advanced Engineering and Science

Microstrip patch antennas are widely used in modern day communication devices due to their light weight, low cost and ease of fabrication. In this paper, we have designed and fabricated two Microstrip Patch Antennas (slotted-ring and truncated-slotted ring) and array at 2.4 GHz for Wireless Local Area Network (WLAN) applications using Computer Simulation Technology, CST. The antenna design consists of rectangular radiating patch on Rogers RT5880 substrate and is excited by using coaxial probe feeding technique. The truncated-slotted ring has been designed on top of the radiating patch to improve bandwidth. The simulation and measurement results of the both antennas are in close agreement with each other. Due to the good agreement of simulation and measurement results of truncated-slotted ring antenna in comparison with slotted-ring antenna, it has been selected for antenna array design. The simulated and measured S11 of truncated-slotted ring antenna shows -21dB and -15.6 dB at 2.4 GHz respectively. Then, the antenna has been formed into 1x4 array in order to observe its beamforming capability. The proposed antenna array is suitable for 802.11b/g/n Wi-Fi standard which is proposed to be used for IoT.

Distinctive features for normal and crackles respiratory sounds using cepstral coefficients N. H. Mohd Johari; Noreha Abdul Malik; K. A. Sidek
Bulletin of Electrical Engineering and Informatics Vol 8, No 3: September 2019
Publisher : Institute of Advanced Engineering and Science

Classification of respiratory sounds between normal and abnormal is very crucial for screening and diagnosis purposes. Lung associated diseases can be detected through this technique. With the advancement of computerized auscultation technology, the adventitious sounds such as crackles can be detected and therefore diagnostic test can be performed earlier. In this paper, Linear Predictive Cepstral Coefficient (LPCC) and Mel-frequency Cepstral Coefficient (MFCC) are used to extract features from normal and crackles respiratory sounds. By using statistical computation such as mean and standard deviation (SD) of cepstral based coefficients it can differentiate between crackles and normal sounds. The statistical computations of the cepstral coefficient of LPCC and MFCC show that the mean LPCC except for the third coefficient and first three statistical coefficient values of MFCC’s SD provide distinctive feature between normal and crackles respiratory sounds. Hence, LPCCs and MFCCs can be used as feature extraction method of respiratory sounds to classify between normal and crackles as screening and diagnostic tool.

Efficient 3D stereo vision stabilization for multi-camera viewpoints Sharif Shah Newaj Bhuiyan; Othman O. Khalifa
Bulletin of Electrical Engineering and Informatics Vol 8, No 3: September 2019
Publisher : Institute of Advanced Engineering and Science

In this paper, an algorithm is developed in 3D Stereo vision to improve image stabilization process for multi-camera viewpoints. Finding accurate unique matching key-points using Harris Laplace corner detection method for different photometric changes and geometric transformation in images. Then improved the connectivity of correct matching pairs by minimizing the global error using spanning tree algorithm. Tree algorithm helps to stabilize randomly positioned camera viewpoints in linear order. The unique matching key-points will be calculated only once with our method. Then calculated planar transformation will be applied for real time video rendering. The proposed algorithm can process more than 200 camera viewpoints within two seconds.

Page 53 of 291 | Total Record : 2901

51 52 53 54 55

Filter by Year

2012 2025

Filter By Issues

All Issue Vol 14, No 6: December 2025 Vol 14, No 5: October 2025 Vol 14, No 4: August 2025 Vol 14, No 3: June 2025 Vol 14, No 2: April 2025 Vol 14, No 1: February 2025 Vol 13, No 6: December 2024 Vol 13, No 5: October 2024 Vol 13, No 4: August 2024 Vol 13, No 3: June 2024 Vol 13, No 2: April 2024 Vol 13, No 1: February 2024 Vol 12, No 6: December 2023 Vol 12, No 5: October 2023 Vol 12, No 4: August 2023 Vol 12, No 3: June 2023 Vol 12, No 2: April 2023 Vol 12, No 1: February 2023 Vol 11, No 6: December 2022 Vol 11, No 5: October 2022 Vol 11, No 4: August 2022 Vol 11, No 3: June 2022 Vol 11, No 2: April 2022 Vol 11, No 1: February 2022 Vol 10, No 6: December 2021 Vol 10, No 5: October 2021 Vol 10, No 4: August 2021 Vol 10, No 3: June 2021 Vol 10, No 2: April 2021 Vol 10, No 1: February 2021 Vol 9, No 6: December 2020 Vol 9, No 5: October 2020 Vol 9, No 4: August 2020 Vol 9, No 3: June 2020 Vol 9, No 2: April 2020 Vol 9, No 1: February 2020 Vol 8, No 4: December 2019 Vol 8, No 3: September 2019 Vol 8, No 2: June 2019 Vol 8, No 1: March 2019 Vol 7, No 4: December 2018 Vol 7, No 3: September 2018 Vol 7, No 2: June 2018 Vol 7, No 1: March 2018 Vol 6, No 4: December 2017 Vol 6, No 3: September 2017 Vol 6, No 2: June 2017 Vol 6, No 1: March 2017 Vol 5, No 4: December 2016 Vol 5, No 3: September 2016 Vol 5, No 2: June 2016 Vol 5, No 1: March 2016 Vol 4, No 4: December 2015 Vol 4, No 3: September 2015 Vol 4, No 2: June 2015 Vol 4, No 1: March 2015 Vol 3, No 4: December 2014 Vol 3, No 3: September 2014 Vol 3, No 2: June 2014 Vol 3, No 1: March 2014 Vol 2, No 4: December 2013 Vol 2, No 3: September 2013 Vol 2, No 2: June 2013 Vol 2, No 1: March 2013 Vol 1, No 4: December 2012 Vol 1, No 3: September 2012 Vol 1, No 2: June 2012 Vol 1, No 1: March 2012 List of Accepted Papers (with minor revisions) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota yogyakarta,

Daerah istimewa yogyakarta

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota yogyakarta, Daerah istimewa yogyakarta INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota yogyakarta,

Daerah istimewa yogyakarta

INDONESIA