Garuda - Garba Rujukan Digital

All

Padjadjaran Journal of Dentistry

PJD
Website

Published by Universitas Padjadjaran

ISSN : 19790201 EISSN : 25496212 DOI : -

Biochemistry, Genetics & Molecular Biology Dentistry Health Professions Immunology & microbiology Medicine & Pharmacology Public Health

Padjadjaran Journal of Dentistry or known as PJD, is an English-language scientific periodicals published by the Faculty of Dentistry Universitas Padjadjaran thrice a year on every March, July and November. The submission process of manuscript is open throughout the year. All submitted manuscripts will go through the double-blind peer review and editorial review before being granted with acceptance for publication. Designed as a medium of information and scientific knowledge, Padjadjaran Journal of Dentistry publishes numerous research articles, in the area of Oral Biology, Dental Material Science and Technology, Oral and Maxillofacial Surgery, Pedodontics, Dental Public Health and Community Dentistry, Conservative Dentistry, Periodontics, Prosthodontics, Orthodontics, Oral Medicine, Dental Radiology, as well as with their development through interdisciplinary and multidisciplinary approach. Initially published as Padjadjaran Journal of Dentistry (PJD) magazine ISSN 1979-0201(print) on 2007 in form of printed issues. In 2017, the magazine had its online published version under the same with ISSN 2549-6212 (online) in accordance with the policy of LIPI. Padjadjaran Journal of Dentistry has been using Open Journal System requiring all writers to register in advance before they are allowed to upload the manuscript they write online. Afterwards, the editors, peer reviewers, and writers can monitor the manuscript processing. Several other changes are informed in the Journal History.

Arjuna Subject : -

Articles 10 Documents

Search results for , issue "Vol 19, No 1 (2007): March 2007" : 10 Documents clear

Treatment of bilateral ankylosis of the temporomandibular joint with temporalis superficial fascia interpositional flap Yusuf, Harmas Yazid; Kasim, Alwin; Karasutisna, Tis
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Universitas Padjadjaran

Ankylosis of the temporomandibular joint (TMJ) involves fusion of the mandibular condyle to the base of the skull. Trauma and infection are the leading causes of ankylosis. A case of true bilateral ankylosis of the temporomandibular joint is presented. A 21-year-old male patient had a multiple bone fractures history at the age of 13 due to a sports injury. A TMJ injury might not be detected at that time resulting in a progressive restriction of his mouth opening. He presented with almost complete lack of mobility of the mandible. Surgical treatment was a resection of the ankylotic bone mass, interposition temporalis superficial fascia flaps, and early mobilization and aggressive physiotherapy. The functional results showed good remarks.

Saliva secretion difference before and after rinsing with baking soda on menopause women Anggraeni, Dewi; Tjahajawati, Sri; Wihardja, Rosiliwati
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Universitas Padjadjaran

Menopause women can experience a decrease in saliva secretion (decrease). To understand the clear picture about saliva secretion, the volume, flow rate, pH and viscosity were then measured. The aim of this research was to obtain a picture about the difference of saliva secretion before and after rinsing with baking soda on menopause women. The type of the research used was a laboratory quasi-experiment with comparative descriptive form. The technique used in this research is the survey method, and samples were taken using the multistage cluster random sampling method, and t-student statistical analysis. This research was conducted with the saliva collected with spitting method on 45 menopause women. The results show that the average volume, flow rate, pH and viscosity before rinsing with baking soda was 1.79 ml, 0.18 ml/minute, 7.40 and 0.81 mm2/second. The average volume, flow rate, pH and viscosity after rinsing with baking soda were 2.66 ml; 0.27 ml/minute; 8.67 and 0.78 mm2/second. Statistical analysis t-student on α = 0.05 shows volume changes, flow rate, pH and saliva viscosity before and after rinsing with baking soda was 0.873; 0.086; 1.273 and 0.037 respectively. The conclusion shows a significant difference between saliva secretion before and after rinsing with baking soda, and saliva secretion after rinsing with baking soda on menopause women.

Sedation as a technique to aid in the supportive examination for children with special needs Risti Saptarini Primarti; Arlette Suzy Puspa Pertiwi
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Faculty of Dentistry Universitas Padjadjaran

Undergoing medical procedures often extremely distress people, especially patients with special needs. Supportive examinations, such as radiographic and laboratory examinations, as a part of medical procedure sometimes are impossible to be done in those patients, while we demand those tests for diagnostic and treatment reasons. A variety of techniques are available to the dental and medical professional to aid in the management of these patients regarding medical procedures, one of them is sedation. By eliminating patient’s fear and anxiety throughout sedation, all medical procedure including taking a supportive examination may be successfully completed. This paper will report the role of sedation as a technique to aid in the supportive examination for special needs child (Down’s syndrome) in Hasan Sadikin General Hospital, Bandung, West Java Indonesia.

Streptococcus Alpha growth in gingivitis patient’s dental plaque after rinsing with green tea extract (Camellia Sinensis) Isti Endah Kurniwati; Juni Handajani; Regina TC. Tandelilin
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Faculty of Dentistry Universitas Padjadjaran

Green tea (Camellia sinensis) has been widely known as a healthy drink since long time ago. One of the substances in green tea which can give health benefit is catechin, an antibacterial substance. The purpose of this research is to know the efficacy of rinsing with green tea extract to Streptococcus alpha growth on gingivitis patient’s dental plaque. The research subjects include 30 mild gingivitis patients, and these subjects are divided into two groups: treatment group (20 patients) and control group (10 patients). Ten patients of treatment group rinse their mouth with 0.25% green tea extract and 10 other patients with 0.5% green tea extract. Meanwhile, control group use Bactidol (0.1% Hexetidine). Rinsing the mouth is performed every morning and night for five days. Sampling is conducted on the first and sixth day. Before rinsing data is analyzed using ANOVA and the result shows a significant difference. ANAVA testing then is done using proportion value. ANAVA Testing result shows that there is no significant difference among the patients in the treatment group. This result indicates that the effect of rinsing with 0.25% and 0.5% green tea extract is equivalent to the control (0.1% Hexetidine) to inhibit S. alpha growth on mild gingivitis patient’s dental plaque. From these two concentrations, it has not been known which one is the most effective concentration to inhibit S. alpha growth on mild gingivitis patient.

The comparison of speed and accuracy between manual and computer-aided measurements of dental arch and jaw arch lengths in study model casts Wibisono, Dinah; Thahar, Bergman; Hambali, Tono S.; Salim, Jono
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Universitas Padjadjaran

This research is aimed at observing whether there are differences in the measurement results between dental arch length and arch length measured manually and by using computer software, i.e. Corel Draw 12, in study model cast as well as the measurement speed in both techniques. The method used in this research is the descriptive comparative method. The measurement is performed to 52 study model cast samples with the Spee Curve depth of < 1.5 mm, between 1.5 and 3 mm, > 3 mm. The measurements are performed using 2 techniques: a manual technique using a calliper and by using Corel Draw 12, a computer program with a computer scanner. The t-test statistic is used to reveal whether there are differences in the measurement results between the two techniques and which method needs shorter time. Statistically, there are significant differences either in the speed of the measurement or the results of the measurement using both techniques where t-calculated > t table. The deeper the Spee curve, the more different the results from the manual technique and computed technique. The differences are in the range of 0.32 to 0.52 mm for dental arch length and 0.33 to 0.43 mm for arch length. These differences are still acceptable clinically. By referring to the results of this research, it is expected that computer usage can be increased and become an alternative against manual technique of measurement.

RPI and RPL clasp masticatory load distribution in lower free end denture case with photoelastic methods Sutanto, Dahlia; Mahmud, Muslich; Rahajoeningsih, Poedji
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Universitas Padjadjaran

The extent and direction of movement of removable partial dentures during function are influenced by the nature of supporting structures and the design of the prosthesis since forces are transmitted to abutment teeth by rest, guide planes, and direct retainers during functional movements. Because of the lack of tooth support distally, the denture base will have tissueward underfunction proportionate to the quality (displaceability) of the supporting soft tissue, the accuracy of the denture base, and the total occlusal load applied. The movement of the base under function determines the occlusal efficiency of the partial denture and the degree to which the abutment teeth are subjected to torque and tipping stresses.The purpose of this study is to know the functional load exerts with RPI and RPL direct retainer in bilateral distal extension. This study is a laboratory experiment employing samples of 5 frames using RPI and 5 frames using RPL direct retainer design. Testing was conducted by Vishay Teaching Polariscope type 080. The result was noted and analyzed statistically using ANOVA.The result of this study indicates that F calculation value for frame with RPI and RPL direct retainer design is 5,35 and 6,11 Mpa; F calculation for the occlusal load distribution on first premolar and edentulous area is 276,90 Mpa and 171,53 Mpa; F calculation for occlusal load distribution on first premolar and edentulous area employing RPI and RPL direct retainer design is 9,17 and 11,96 Mpa. This statistical calculation shows that there is a significant difference between RPI and RPL direct retainer design, the occlusal load concentrated at edentulous area either RPI or RPL direct retainer, and the occlusal load distribution between the first premolar and edentulous area are more uniform on RPI direct retainer design.

Microscrew implant as an orthodontic anchoring device Supriadi, Mira Nurtania; Soeria Soemantri, Eky Setiawan; Evangelina, Ida Ayu
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Universitas Padjadjaran

Microscrew implant is a new alternative of an orthodontic anchoring device which is planted by simple surgery procedure into soft tissue and mandibular bone to utilize mandibular bone as an intraoral anchoring source. Microscrew implant is a small screw and consists of four components that can give various advantages, made from a titanium material, and developed in various sizes and designs. Microscrew implant is strong, stable, and effective to be used as an absolute anchoring device in orthodontic treatment without losing the anchoring.

The comparison of 0.05% sodium fluoride and 0.2% chlorhexidine usage and aquadest to the plaque index on fixed orthodontic patients Wiraja, Veronica Vera D.; Hambali, Tono S.; Lambri, Soertini E.
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Universitas Padjadjaran

The fixed orthodontic appliance will cause changes in microbial flora the oral cavity and food debris accumulation and will be formed especially around the gingival sulcus. Plaque control using chemical means can be done by using mouth rinse. This research compared the influence of 0.05% sodium fluoride mouth rinse with aquadest and 0.2% chlorhexidine to the plaque index in fixed orthodontic patients. A double-blind and cross over clinical assessment were applied using a sample size of 16 male fixed orthodontic patients with the age above 21 years. 0.05% sodium fluoride, 0.2% chlorhexidine mouth rinse was given to all patients as a positive control and aquadest as a negative control. Plaque index was then measured after 24 hours without tooth brushing, after using the mouth rinse and a week after using the mouth rinse with tooth brushing. The results showed that the use of 0.05% sodium fluoride mouth rinse reduced plaque index more significantly compared to 0.2% chlorhexidine. The mechanical plaque control by tooth brushing is still the most influential mean to reduce plaque index in fixed orthodontic patients. Mouth rinse is just an additional mean to reduce plaque.

Contaminant bacteria in traditional-packed honey Pramesti, Hening Tjaturina; Hardjawinata, Karlina; Fath, Putra Qadri
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Universitas Padjadjaran

Honey may be contaminated by microorganisms during its harvesting, processing, and packaging. Honey selected for clinical purposes must safe, sterile, and contain antimicrobial activity, so it must be evaluated using laboratory testing. The aim of this descriptive laboratory study was to isolate and identify the bacterial contaminant in the traditional-packed honey dealing with the use of honey for medical purposes. the colony forming units of honey sample cultured on blood agar were counted using Stuart bacterial colony counter. The suspected bacterial colonies were isolated and identified based on cultural morphology characteristics. The isolates of suspected bacterial colonies were stained according to Gram and Klein method and then were examined by the biochemical reaction. The results showed that there were two contaminant bacteria. Gram-positive cocci which were presumptively identified as coagulase-negative Staphylococci and gram-positive rods which were presumptively identified as Bacillus subtilis. In conclusion, the contaminant bacteria were regarded as low pathogen bacteria. The subtilin enzyme of B subtilis may cause an allergic reaction and coagulase-negative Staphylococci, Staphylococcus epidermidis is also an opportunist pathogen. Inevitably, for medical purposes, traditional-packed honey must be well filtered, water content above 18%, and standardized sterilization without loss of an antibacterial activity or change in properties.

Relationship of clinical assessment of stability and bearing area of maxillary and mandibular denture towards the complete denture wearers satisfaction Ritonga, Putri Welda Utami; Prabakaran, Luveena Loshini
Padjadjaran Journal of Dentistry Vol 19, No 1 (2007): March 2007
Publisher : Universitas Padjadjaran

Introduction:Clinical assessment of complete denture by the dentists may differ from the patient’s satisfaction. Dentists will prioritise the clinical aspects of dentures, while patients will prioritise more on their satisfaction. The purpose of this study was to determine the relationship between the stability and bearing area of maxillary and mandibular denture towards the complete denture wearers satisfaction. Methods: This study was a cross-sectional study with purposive sampling method. The subject of this study was as much as 30 people. The research was conducted in each patient’s house to obtained more honest review of the patient’s satisfaction towards their complete dentures without being affected by any clinical environment, and in accordance to the information of their medical records. All the subjects were interviewed using a questionnaire before a clinical evaluation was conducted. The test analysis used was the Fisher test. Clinical examination was used to assess denture stability and bearing area. Evaluation of the patient’s satisfaction level was performed using a questionnaire regarding mastication and comfort. Results:There was a significant association between the clinical evaluation towards the patient’s satisfaction level which were the stability of maxillary denture towards mastication (p = 0.012); and mandibular denture towards mastication (p = 0.029). Whereas no relationship found between maxillary denturebearing area towards comfort (p = 0,051) and mandibular denture-bearing area towards comfort (p =0,547).Conclusion:Stability of maxillary and mandibular denture affected the patient’s mastication satisfaction, whereas bearing area of maxillary and mandibular denture was not affected the patient’s comfort satisfaction.

Page 1 of 1 | Total Record : 10

Filter by Year

2007 2007

Filter By Issues

All Issue Vol 37, No 1 (2025): April 2025 (Supplements 1) Vol 37, No 3 (2025): November 2025 Vol 37, No 2 (2025): July 2025 Vol 37, No 1 (2025): March 2025 Vol 36, No 3 (2024): November 2024 Vol 36, No 2 (2024): July 2024 Vol 36, No 1 (2024): March 2024 Vol 35, No 3 (2023): November 2023 Vol 35, No 2 (2023): July 2023 Vol 35, No 1 (2023): March 2023 Vol 34, No 3 (2022): November 2022 Vol 34, No 2 (2022): July Vol 34, No 1 (2022): March Vol 33, No 2 (2021): July 2021 Vol 33, No 1 (2021): March 2021 Vol 33, No 3 (2021): November Vol 32, No 3 (2020): November 2020 Vol 32, No 2 (2020): July 2020 Vol 32, No 1 (2020): March 2020 Vol 31, No 3 (2019): November 2019 Vol 31, No 2 (2019): July 2019 Vol 31, No 1 (2019): March 2019 Vol 30, No 3 (2018): November 2018 Vol 30, No 2 (2018): July 2018 Vol 30, No 1 (2018): March 2018 Vol 30, No 2 (2018): July Vol 30, No 1 (2018): March Vol 29, No 3 (2017): November 2017 Vol 29, No 2 (2017): July 2017 Vol 29, No 1 (2017): March 2017 Vol 29, No 3 (2017): November Vol 29, No 2 (2017): July Vol 29, No 1 (2017): March Vol 28, No 3 (2016): November 2016 Vol 28, No 2 (2016): July 2016 Vol 28, No 1 (2016): March 2016 Vol 28, No 3 (2016): November Vol 28, No 2 (2016): July Vol 28, No 1 (2016): March Vol 27, No 3 (2015): November 2015 Vol 27, No 2 (2015): July 2015 Vol 27, No 1 (2015): March 2015 Vol 27, No 3 (2015): November Vol 26, No 3 (2014): November 2014 Vol 26, No 2 (2014): July 2014 Vol 26, No 1 (2014): March 2014 Vol 26, No 3 (2014): November Vol 25, No 3 (2013): November 2013 Vol 25, No 2 (2013): July 2013 Vol 25, No 1 (2013): March 2013 Vol 25, No 3 (2013): November Vol 25, No 2 (2013): July Vol 25, No 1 (2013): March Vol 24, No 3 (2012): November 2012 Vol 24, No 2 (2012): July 2012 Vol 24, No 1 (2012): March 2012 Vol 24, No 1 (2012): March Vol 23, No 3 (2011): November 2011 Vol 23, No 2 (2011): July 2011 Vol 23, No 1 (2011): March 2011 Vol 23, No 3 (2011): November Vol 23, No 2 (2011): July Vol 23, No 1 (2011): March Vol 22, No 3 (2010): November 2010 Vol 22, No 2 (2010): July 2010 Vol 22, No 1 (2010): March 2010 Vol 22, No 3 (2010): November Vol 22, No 2 (2010): July Vol 22, No 1 (2010): March Vol 21, No 3 (2009): November 2009 Vol 21, No 2 (2009): July 2009 Vol 21, No 1 (2009): March 2009 Vol 21, No 3 (2009): November Vol 21, No 2 (2009): July Vol 21, No 1 (2009): March Vol 20, No 3 (2008): November 2008 Vol 20, No 2 (2008): July 2008 Vol 20, No 1 (2008): March 2008 Vol 20, No 3 (2008): November Vol 20, No 2 (2008): July Vol 20, No 1 (2008): March Vol 19, No 3 (2007): November 2007 Vol 19, No 2 (2007): July 2007 Vol 19, No 1 (2007): March 2007 Vol 19, No 3 (2007): November Vol 19, No 2 (2007): July Vol 19, No 1 (2007): March More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota bandung,

Jawa barat

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota bandung, Jawa barat INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota bandung,

Jawa barat

INDONESIA