Claim Missing Document
Check
Articles

Found 20 Documents
Search

PROFIL LEMBAR KERJA PESERTA DIDIK (LKPD) UNSUR, SENYAWA, DAN CAMPURAN DENGAN PENDEKATAN STEM Fitriyah, Lina Arifah; Humaidillah Kurniadi Wardana
Jurnal Zarah Vol 7 No 2 (2019): Jurnal Zarah
Publisher : Fakultas Keguruan dan Ilmu Pendidikan, Universitas Maritim Raja Ali Haji

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (345.748 KB) | DOI: 10.31629/zarah.v7i2.1430

Abstract

Penelitian ini bertujuan untuk mengembangkan Lembar Kerja Peserta Didik (LKPD) Berbasis Pendekatan Sains, Teknologi, Rekayasa dan Matematika yang berkualitas berdasarkan kesahihan. Penelitian ini termasuk penelitian pengembangan. Prosedur pengembangan yang digunakan terdiri dari merumuskan kompetensi, mengembangkan produk yaitu merancang dan membuat LKPD serta instrumen penilaiannya serta evaluasi yang berkualitas dan sahih untuk digunakan dalam proses pembelajaran. Hasil pengembangan menunjukkan bahwa penilaian dari ahli kimia, ahli media, dan pendidik/guru sangat sahih yaitu rata-rata 3,75 dan 93,75 % yang artinya memenuhi standar kesahihan (kelayakan) suatu bahan ajar.
Prototipe Monitoring Suhu dan Kelembaban dalam Pengolahan Air Menggunakan SHT11 Wardana, Humaidillah Kurniadi
Reaktom : Rekayasa Keteknikan dan Optimasi Vol 2 No 1 (2017)
Publisher : Universitas Hasyim Asy'ari

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33752/reaktom.v2i1.151

Abstract

Telah berhasil dirancang dan dibuat prototipe monitoring suhu dan kelembaban dalam pengolahan air. Sistem monitoring dibuat menggunakan sensor SHT 11 dihubungkan dengan rangkaian minimum ATMega 16 yang ditampilkan pada LCD 16x2 sebagai keluaran output. Pengambilan data dilakukan sebanyak 3 kali pengukuran dengan tiap pengukuran diambil data sebayak 10 kali selama 10 menit. Tiap pengukuran dari pertama ke pengukuran kedua maupun ketiga memiliki rentang waktu 1 jam Kata Kunci: Air, Suhu, Kelembaban, SHT11, ATMega16.
Perbandingan Nilai Urin Puasa dan Urin Acak Pada Penderita DM (DIABETES MELLITUS) Menggunakan Metode Resistansi dan Perbedaan Warna RGB Berbasis Arduino Wardana, Humaidillah Kurniadi; Indahwati, Elly; Fitriyah, Lina Arifah
Reaktom : Rekayasa Keteknikan dan Optimasi Vol 2 No 2 (2017)
Publisher : Universitas Hasyim Asy'ari

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33752/reaktom.v2i2.198

Abstract

AbstrakPengukuran kadar glukosa dalam urin pada penelitian ini menggunakan prinsip resistansi dan perbedaan warna berdasarkan RGB nya. Pengukuran dilakukan dengan menggunakan urin puasa dan urin acak. Nilai resistansi diperoleh dari sel elektroda yang dihubungkan pada salah satu lengan rangkaian jembatan wheatstone dan warna didapatkan dari sensor tcs3200 yang dihubungkan pada arduino uno dan ditampilkan pada lcd 16x4. Hasilpengukuran menunjukkan bahwa nilai urin acak lebih tinggi dua kali lipat dari urin puasa dan hasil deteksi warna untuk penderita DM urin berwarna biru sedangkan yang tidak DM berwarna merah.Kata Kunci: Urin, DM, Resistansi, RGB, Arduino.AbstractMeasurements of the levels of glucose in the urine in this study uses the principle of resistance and the difference in color based on RGB. The measurement is carried out using urine fasting and random urine. The resistance value obtained from the cell electrodes are connected on one arm of the bridge circuit wheatstone and the color obtained from sensors connected on tcs3200 arduino uno and 16x4 displayed on the lcd. The results of themeasurements show that the value of the higher random urine twice as fast, and the results of the urine color detection for sufferers of DM blue urine while not DM is red.Keywords: Urine, DM, Resistance, RGB, Arduino.
PENGENDALIAN PERALATAN RUMAH TANGGA MENGGUNAKAN ARDUINO UNO BERBASIS BLUETOOTH Fauzi, Ahmad; Rijanto, Tri; Kurniadi Wardana, Humaidillah
Reaktom : Rekayasa Keteknikan dan Optimasi Vol 4 No 1 (2019)
Publisher : Universitas Hasyim Asy'ari

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33752/reaktom.v4i1.425

Abstract

With increasing preoccupation of mankind it takes a smart home system innovation which is the concept of home automation control device comprising of a smartphone. Smart home system aims tofacilitate the work of humans in controlling household appliances using a smartphone. The research method used is the method of measurement of the distance to reach. On the sensor LightDependent Resistor (LDR) and method of reading the average light intensity on the morning and afternoon.A method of Passive Infrared sensor on Receaver (PIR) by detecting the distance sensitivity of humanmovement response. The results showed the distance which can be reached by a hc-05untuk bluetooth to control the lightsand the fan as far as 75 metres to condition without hindrance, while sensors LDR with an average 20.5 luxin the morning while in the evening with an average 19.5 lux, sensor PIR respond to human movement asfar as 7 meters. Keywords: Bluetooth hc-05, Smart home, Sensor Light Dependent Resistor (LDR), Infrared Sensor Receaver (PIR)
Application of Early Diagnosis of Diabetes Mellitus (DM) Equipped with Calorie Needs for DM Sufferers using the Fuzzy Mamdani Method Wardana, Humaidillah Kurniadi; Ummah, Imamatul; Fitriyah, Lina Arifah
Kinetik: Game Technology, Information System, Computer Network, Computing, Electronics, and Control Vol. 5, No. 4, November 2020
Publisher : Universitas Muhammadiyah Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22219/kinetik.v5i4.1088

Abstract

Diabetes Mellitus (DM) is one of the deadliest degenerative diseases in the world. The prevalence of DM in Indonesia from year to year shows asignificant increase. The high number of these causes the need for appropriate action and anticipation for health workers, DM families and DM people themselves. In this study, a system application model was created by using informatics techniques in health for early diagnosis of DM and what calorie needs needed for DM sufferers. This system was created using a GUI application and the Mamdani fuzzy method. The purpose of creating this system is to help in making an initial decision for DM diagnosis. The results obtained, first a DM diagnosis system with 6 input variables, 3 output variables, and 155 rules with MAPE achieved 29.48%. The second is the calorie requirements system with 2 input variables, 2 output variables namely BMI with MAPE 10.57% BMR with MAPE 9.7% and 9 rules with the results achieved by 99%.
Otomatisasi Penyiraman Tanaman Cabai Dan Tomat Berbasis Iot Nurul Fauzia, Nur Kholis, Humaidillah Kurniadi Wardana
Reaktom : Rekayasa Keteknikan dan Optimasi Vol 6 No 1 (2021): Juni 2021
Publisher : Universitas Hasyim Asy'ari

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33752/reaktom.v6i1.2172

Abstract

Watering plants on agricultural land by applying IoT application that can be monitored on smartphone is veri necessary for farmers to faciliitate farmers to monitor and care for plants easily, effectively and efficiently. The purpose of this research to design and make watering devices for chili and tomato plants that can watering automatically IoT based. The research method used is an experimental method designed using esp32 as the main control module of the system, humidity sensor YL-69 to measure soil moisture, ultrasonic sensor HCSR-04 to control water availability in reservoirs, and blynk application as a display on smartphone. The result of research on the design of automatic watering on chili and tomato plants carried out for 3 consecutive days starting at 07:00 WIB to 17:00 WIB. The result of research on the design of watering plants for chilies and tomatoes can function well and can work with adc values of > 600 pumps on up to < 600 pumps off.
Pengaruh Kecepatan Angin Pada Pembangkit Listrik Tenaga Angin Memanfaatkan Kubah Masjid Putar Rahmat Kholiq Al Mujasir, Nur Kholis, Humaidillah Kurniadi Wardana
Reaktom : Rekayasa Keteknikan dan Optimasi Vol 6 No 1 (2021): Juni 2021
Publisher : Universitas Hasyim Asy'ari

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33752/reaktom.v6i1.2173

Abstract

This research aims to develop and research further about the potential of wind in Jombang to be used as analternative to wind power plants by utilizing the domed swivel mosque. The method in this research is experimentalresearch related to science and engineering technology, namely the making of a mosque turning dome as an alternativeto wind power generation. This tool utilizes the spinning dome of a turning mosque as a producer of motion energywhich is connected to a dc generator using gear and chains as a transformer of rotary motion energy into electricalenergy that produces dc electricity output. The DC electricity is supplied to the Buck boost converter to be regulatedand stabilized the voltage entering the charger module to charge the battery. The output from the battery is then insertedinto a step up step down to be regulated and the voltage is stabilized to 12 v towards the volt ampere meter input as atool to read the voltage on the battery and the current on the lamp. Based on the results of this study, it can be found thatthe blow angle of the blower against the dome 30 ° to the dome is less effective, if the blow angle of the blower againstthe dome is 40 ° it has good effectiveness and greatly affects the stability and speed of the dome rotation and theincrease in load applied to the dc generator results in drop voltage so it greatly affects the supply to the battery.
Rancang Bangun Monitoring Solar Tracking System Menggunakan Arduino dan Nodemcu Esp 8266 Berbasis IoT Mochamad Aji Prasetyo; Humaidillah Kurniadi Wardana
RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer) Vol 4, No 2 (2021): RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer)
Publisher : Universitas Muhammadiyah Jakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24853/resistor.4.2.163-168

Abstract

Telah dirancang dan dibuat monitoring solar tracking system menggunakan mikrokontroler arduino, nodemcu esp 8266, sensor LDR, sensor INA219, sensor BH1750, sensor MPU6050 berbasis IoT yang ditampilkan pada web thinger.io. Solar tracking dibuat dengan tujuan untuk menganalisis secara langsung sistem monitoring solar tracking system dan menganalisis hasil pengujian pengujian monitoring solar tracking system. Metode penelitian yang digunakan berupa pengujian monitoring solar tracking system dari hasil pengukuran kemiringan panel surya, tegangan, arus serta intensitas cahaya menggunakan alat rancangan yang dibuat dibandingkan dengan alat ukur standar. Kemudian dihitung berapa persen prosentase kesalahan dari tiap pengukuran tersebut. Hasil dari pengukuran selama 5 hari monitoring solar tracking system memiliki tingkat presentasi kesalahan berkisar antara  0% - 10%  pengukuran arus, 0% pengukuran tegangan, 0% - 3% derajat kemiringan, dan 21% - 43% pengukuran intensitas cahaya.A solar tracking system monitoring has been designed and made using an Arduino microcontroller, nodemcu esp 8266, LDR sensor, INA219 sensor, BH1750, IoT-based MPU6050 sensor which is displayed on the web thinger.io. Solar tracking is made with the aim of directly analyzing the solar tracking system monitoring system and analyzing the test results of the solar tracking system monitoring test. The research method used is a solar tracking system monitoring test from the results of measuring the slope of the solar panel, voltage, current and light intensity using a design tool made compared to standard measuring instruments. Then the percentage of error is calculated for each of these measurements. The results of measurements for 5 days of monitoring the solar tracking system have error presentation rates ranging from 0% - 10% current measurement, 0% voltage measurement, 0% - 3% slope degree, and 21% - 43% light intensity measurement.
Sistem Pakar Fuzzy dengan Metode Sugeno Untuk Diagnosa Penyakit Diabetes Mellitus Humaidillah Kurniadi Wardana; Imamatul Ummah; Lina Arifah Fitriyah
Jurnal Fisika Flux: Jurnal Ilmiah Fisika FMIPA Universitas Lambung Mangkurat Vol 19, No 2 (2022): Jurnal Fisika Flux: Jurnal Ilmiah Fisika FMIPA Universitas Lambung Mangkurat
Publisher : Lambung Mangkurat University Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1308.416 KB) | DOI: 10.20527/flux.v19i2.9607

Abstract

Telah berhasil dibuat sistem pakar fuzzy metode Sugeno  untuk mendeteksi penyakit diabetes mellitus atau tidak. Tujuan dibuatnya sistem pakar  ini untuk membantu membuat suatu keputusan dengan cepat dalam mendiagnosa penyakit diabetes mellitus.Variabel 7 inputan pada himpunan fuzzy berasal dari laboratorium RSUD Jombang yaitu tekanan darah sistol, tekanan darah diastol, glukosa sewaktu, kolestrol total, kadar HDL, kadar LDL, dan trigliserida. Sedangkan variabel output untuk mendiagnosa penyakit diabetes mellitus meliputi normal, pre diabetes, dan diabetes. Hasil dari pengujian dengan rule 129 dan tingkat keakuaratan sistem ini sebesar 68%.
Pelatihan Kendali Lampu LED Berbasis IoT di SMK Dwija Bhakti 1 Jombang Untuk Meningkatkan Kemampuan Siswa di Era Revolusi Industri 4.0 Humaidillah Kurniadi Wardana; Nanndo Yannuansa; Imamatul Ummah
Jurnal Anugerah Vol 4 No 1 (2022): Jurnal Anugerah: Jurnal Pengabdian kepada Masyarakat Bidang Keguruan dan Ilmu Pen
Publisher : Fakultas Keguruan dan Ilmu Pendidikan Universitas Maritim Raja Ali Haji

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (562.006 KB) | DOI: 10.31629/anugerah.v4i1.4291

Abstract

Pengetahuan dan keterampilan tentang IoT di era revolusi industri 4.0 sangat diperlukan dan banyak diterapkan dalam kehidupan manusia. Banyaknya peralatan yang dikontrol menggunakan IoT juga diterapkan di dunia pendidikan. Untuk itu diperlukan pengetahuan dan pelatihan awal mengenai IoT pada siswa Sekolah Menengah Kejuruan (SMK). Kegiatan pengabdian kepada masyarakat dikemas dalam pelatihan yang dilaksanakan di SMK Dwija Bhakti 1 Jombang dengan jumlah peserta sebanyak 30 orang siswa. Pelatihan ini berupa mempelajari rangkaian dan pemograman kendali 2 lampu led dan 1 kipas dc berbasis IoT menggunakan nodemcu esp 32 sebagai mikrokontroler dan aplikasi blynk yang digunakan untuk menampilkan pengendalian di smartphone. Tujuan dari kegiatan ini adalah untuk mengetahui kelayakan dari materi pelatihan IoT, kelayakan penyampaian materi, dan kelayakan kegiatan pelatihan IoT. Kegiatan dilakukan melalui tiga tahap yaitu tahap persiapan, penerapan, dan akhir. Hasil yang diperoleh dari pelatihan ini berupa respon peserta terhadap isi materi pelatihan dengan persentase kelayakan 92,81% (layak), terhadap penyampaian materi dengan persentase 96,25% (layak), terhadap kegiatan pelatihan dengan persentase 97,81% (layak).