Claim Missing Document
Check
Articles

Found 19 Documents
Search

ANALISA KERENTANAN TANAH DI KECAMATAN ADIPALA KABUPATEN CILACAP MENGGUNAKAN METODE MIKROTREMOR SEBAGAI UPAYA MITIGASI BENCANA GEMPA BUMI Wachidah, Siti Fauzatun; Agustin, Ninik
BERKALA FISIKA Vol 24, No 1 (2021): Berkala Fisika
Publisher : BERKALA FISIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Telah dilakukan penelitian tentang kerentanan tanah di Kecamatan Adipala, Kabupaten Cilacap, menggunakan  data  rekaman  mikrotremor  untuk  dianalisa  menggunakan  metode  Horizontal  to vertical Spectral Ratio (HVSR). Metode ini digunakan untuk mengetahui nilai frekuensi dominan tanah  (f0)  dan  amplitudo  dari  frekuensi  dominan  tersebut  (A0).  Nilai  f0  dan  A0  yang  diperoleh selanjutnya akan digunakan lagi untuk menghitung nilai kerentanan tanah (Kg) yang berkaitan dengan kemampuan atau ketahanan tanah terhadap gempa. Dari hasil penelitian yang mengambil 17 titik pengambilan data diperoleh bahwa Kecamatan Adipala memiliki nilai amplifikasi tanah antara 1-8 dan merupakan kawasan dengan resiko kerusakan tinggi apabila terjadi gempa.
Analisis Data Gravitasi Untuk Identifikasi Struktur Bawah Permukaan Daerah Potensi Panas Bumi Cipari Ninik Agustin; Agung Wibawa
Jambura Geoscience Review Vol 4, No 1 (2022): Jambura Geoscience Review (JGEOSREV)
Publisher : Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.34312/jgeosrev.v4i1.12114

Abstract

Geothermal prospect in Cipari has been shown by spring who has a temperature of about 50°C and is categorized as a low temperature. The presence of spring on Cipari earth's surface is an indication of geothermal structures' existence on the surface and a geothermal system below the surface. Geophysical methods can be used for subsurface structures identification, one of them is the density method with gravity data. This study has an objective to identify the subsurface structures in Cipari geothermal potential area using GGMPlus gravity data. Terrain and Bouguer corrections were used to obtain Complete Bouguer Anomaly (CBA). Separation of regional and residual anomalies using Butterwoth and Bandpass filters. The rock contact boundary was obtained by the FHD method and geological structures such as faults were obtained by the SVD method. FHD and SVD results were used as information for 2D forward modeling. The ABL map shows anomalous contrasts in areas that have rock contacts and geological faults. The high anomaly in the center of the study area indicates the Cipari anticline. Data processing and analysis concluded that the area around the Cipari hot spring has anticline, several rock contacts, and normal fault structures. The fault in the study area is part of the geothermal system which is confirmed by GGMPlus data. 
INTERPRETASI ANOMALI MEDAN MAGNET BUMI DI KAWASAN GUNUNGAPI LAMONGAN Ninik Agustin
KURVATEK Vol 5 No 1 (2020): April 2020
Publisher : Institut Teknologi Nasional Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33579/krvtk.v5i1.1615

Abstract

Lumajang is one of district at Jawa Timur regency where located Lamongan volcanic area. Lamongan volcano is a young monogenetic volcano that was growth from a fault at the summit. Eruption at Lamongan volcano not only occurred at the main volcano, but also at parasite cone at Lamongan volcanic area with 37 cinder cones dan 27 maars. Cinder cones dan maars formed from contact of magma and water that cause freatomagmatic eruption with pyroclastic debris and material deposit’s flow. This research focused at mapping western Lamongan volcanic area based on magnetic anomalies to conducted vulcanic activities at subsurface. Based on magnetic anomalies data, there is an area at south, west, and north with high temperature subsurface rock around maars and cinder cones, that is indicated by negative magnetic anomaly. Keywords: Lamongan volcano, maar, cinder cone, magnetic anomalies.
ANALISIS SEBARAN PENCEMARAN LINDI (LEACHATE) BERDASARKAN SIFAT KELISTRIKAN BATUAN MENGGUNAKAN METODE GEOLISTRIK Ninik Agustin; Siti Fauzatun Wachidah
KURVATEK Vol 6 No 1 (2021): April 2021
Publisher : Institut Teknologi Nasional Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33579/krvtk.v6i1.2091

Abstract

Jeruklegi landfill has leachate management system that still potential for leachate infiltration in subsurface. Leachate contamination may occur if landfill activity is continuous and have an impact to local society. Leachate contamination is an environmental pollution man-made minor disaster clasified. This research is an early prevention step by identifying disaster source. Identification is done by analyzing leachate distribution in subsurface using geoelectrical method with Wenner-Schlumberger array. The result of data acquisition is resistivity which is processed to apparent resistivity. Apparent resistivity was modelled by inversion method that shows leachate contamination near surface by resistivity not least at 1 ohm.m. Leachate contamination was not found over 20 meters based on the lack of resistivity difference. This was confirmed by chemical test of bore well water that match to hygiene and sanitation standards. Keywords: leachate, resistivity, geoelectric, Wenner-Schlumberger.
SISTEM AUGMENTED REALITY (AR) DALAM DAKWAH ISLAM Mochamad T. A. Aziz Zein; Ninik Agustin
Al-Munqidz : Jurnal Kajian Keislaman Vol 8, No 2: Juli (2020)
Publisher : Institut Agama Islam Imam Ghozali

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.52802/amk.v8i2.255

Abstract

The Use Of Mobile Technology In The Industrial 4.0 Era Is A Must. The Number Of Smartphone Users Continues To Increase Over Time. Contiinum Reality Technology Which Consists Of Both Virtual Reality (VR) And Augmented Reality (AR) Becomes A Portable Technology That Is Easy And Affordable Being Used With A Smartphone. This Study Has An Objective To Determine The Potential Uses Of Augmented Reality (AR) Technology In Modern Islamic Da'wa. This Study Are Counted As A Literature Study Using The Traditional Review Method.AR Applications Have Been Used In Many Fields, Such As Medical, Military, Manufacturing, Visualization, Entertainment And Games, Robotics, Education, Marketing, Navigation, Tourism, Geospatial, Urban Planning And Civil Sciences. Da’wa Requires Attention In Both Truth And Good Ability Of The Preachers. It’s Based On Legal Aspects And The Procedures (Fiqhud-Dakwah). There Was Limited Amount Of Research And AR Products Used In Da'wa. The AR’s Technology That Can Be Applied In Islamic Da'wa Are 1) Playing Cards For Da’wa, 2) Islamic Story Books, 3) Da’wa Brochures / Leaflets / Poster, 4) Islamic History Museum.
Pengembangan Matriks Penilaian Program Sarjana Sembilan Standar Berbasis Excel dan Visual Basic for Application (VBA) Nanda Noor Fadjrin; Ninik Agustin
INSANIA : Jurnal Pemikiran Alternatif Kependidikan Vol 26 No 2 (2021)
Publisher : Fakultas Tarbiyah dan Ilmu Keguruan IAIN Purwokerto

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (726.918 KB) | DOI: 10.24090/insania.v26i2.5982

Abstract

This research develops a Microsoft Excel application based on the Visual Basic for Application (VBA) Assessment Matrix of 9 Standard Bachelor Programs with product advantages. They are a matrix display with simpler sentences, accreditation assessment, a dashboard of assessment results, and an information system following LKPS to facilitate the manufacture of LEDs based on Quadrant Evaluation. The 4-D development design method is carried out through 4 stages: define, design, develop, and dissemination. The defined stage includes an analysis of the needs of study program managers facing accreditation, an assessment matrix of 9 standard study programs, and dashboard analysis. The design stage includes the selection of the calculation format, dashboard format, and the initial design of the Excel program (prototype I). The development stage is the validation of the initial product design, with the results of the assessment of the content aspect being 4,6250 valid criteria, displaying 4,3750 valid criteria and 4,1250 valid criteria for programmers (prototype II). Limited trials were carried out on all members of SPMI UNUGHA. Each item scored more than or equal to 3.75, with an average of 4.3276, which means it is feasible with a very good rating. (prototype III). The first year the field trial was conducted at the Nahdlatul Ulama University Mathematics Study Program, Purwokerto. Each item scored more than or equal to 3.75, with an average of 4.1354, which means it is feasible with a very good rating. (prototype IV). The dissemination stage (prototype 4) is carried out in two forms: scientific publications in SINTA accredited national journals (INSANIA: Journal of Alternative Educational Thought) and intellectual works: Microsoft Excel applications based on Visual Basic for Application (VBA) Undergraduate Program Assessment Matrix 9 Standards. (Final project).
Creativity and Graphic Design Skills Improvement for the Content Creator Community using Logo Creation Training Ninik Agustin; Mochamad Taufiqurrochman Abdul Aziz Zein
REKA ELKOMIKA: Jurnal Pengabdian kepada Masyarakat Vol 4, No 2 (2023): REKA ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/rekaelkomika.v4i2.89-99

Abstract

MTs Sultan Agung Kalipoh in Kebumen Regency is one of the junior high schools that established a content creator community since 2021. However, despite having computer laboratory facilities, those students primarily relied on smartphone applications indicating basic graphic design knowledge level within their community. Therefore, it is necessary to enhance their creativity and computer-based graphic design skills through learning how to design logo using CorelDraw and Photoshop in form of case study. The community service program was conducted in four (4) phases: analysis of situation, formulation of possible solutions, logo creation training, and evaluation. The results showed a notable 59% increase in logo creation experience indicating of the enhanced creativity in graphic skills. Moreover, there was an 80% improvement in knowledge regarding graphic application functions, and a 75% improvement in the ability to create logos.
Earthquakes time series visualization in cilacap earthquake zone using QGIS and USGS data sets Ninik Agustin; Nani Kurniasih; Mochamad Taufiqurrochman Abdul Aziz Zein
TEKNOSAINS : Jurnal Sains, Teknologi dan Informatika Vol 10 No 2 (2023): TEKNOSAINS: Jurnal Sains, Teknologi dan Informatika
Publisher : LPPMPK-Sekolah Tinggi Teknologi Muhammadiyah Cileungsi

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37373/tekno.v10i2.463

Abstract

Cilacap region earthquakes often occur with more than 5 Richter Scale. With these seismic conditions, earthquake studies in the Cilacap region will always be needed. These studies usually only have output in form of map visualization spatially, however, they have not been compiled in a time series. This study attempts to include visualization of spatial data in the form of a time-series. The data visualization was presented in form of graphs and maps. Graphical visualization using line bar graph type by applying descriptive statistics tries to determine the earthquake’s magnitude fluctuation. The other visualization in form of Heatmap map analysis applying the Kernel Density method is interpolated earthquake magnitude spatial data. The data used in this research was retrieved from the USGS datasets between 1918 to 2021. The spatial boundaries were taken from -7.324 ˚S, 107.941˚E to -10.407˚S, 111.116˚E. The results of spatial data visualization using the heatmap techniques were then analyzed temporally using the Temporal function in the QGIS software. The results of temporal analysis within a year are then sequenced into a video which is displayed on the following link https://youtu.be/m3B7HkfI8qY. The descriptive statistical analysis shows that Earthquakes have magnitudes ranging from 3.3 to 7.58 with a mean of 4.58 and a mode of 4.4. Heatmap analysis shows the results of earthquake magnitude interpolation with high density, located in the south of Cilacap and south of Yogyakarta. Also, the spatiotemporal analysis results show that there is a change in location trends that have high earthquake magnitude density values
Comparison of Web Page Rendering Methods Based on Next.js Framework Using Page Loading Time Test Roy Hanafi; Abd Haq; Ninik Agustin
Teknika Vol 13 No 1 (2024): Maret 2024
Publisher : Center for Research and Community Service, Institut Informatika Indonesia (IKADO) Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.34148/teknika.v13i1.769

Abstract

In the rapidly developing digital age, websites have become indispensable for interaction, information dissemination and transaction. To improve the performance of web applications, choosing the right rendering technology is critical. Next.js is a framework designed to overcome React's limitations in server-side rendering. This study investigates the effectiveness of Client-side Rendering (CSR), Server-side Rendering (SSR), and Static Site Generation (SSG) on the Next.js-based Filmku website using the loading time method. The study concentrates on page loading speed, complete page rendering speed, and user experience. The authentication page takes 422 ms to complete the CSR process, which is 57.41% slower than the SSG finish time of 180 ms and 34.88% slower than SSR, which completes the authentication page in 274 ms. On the Profile page, SSG completes the page rendering process much faster, taking only 524 ms, which is 25.79% faster than SSR's completion time of 706 ms and even 13.75% faster than CSR's completion time of 608 ms. The SSG rendering method completed in 1,135 ms on the main page, which is 15.93% faster than the CSR completion time of 1,350 ms and 25.57% faster than the SSR completion time of 1,525 ms. It is evident that SSG has a faster rendering speed compared to the other methods. However, it should be noted that CSR may result in slower initial page load times. SSR can provide stable rendering times, but it can also burden the server as every client request is fully processed on the server.
WEB-GIS FOR SCHOOL DATA MANAGEMENT AND ASSESSMENT IN KLATEN REGENCY Rian Arif Hidayat; Ninik Agustin; Farly Detrias; Mochamad Taufiqurrochman Abdul Aziz Zein
PROCEEDING AL GHAZALI International Conference Vol. 1 (2023): INCLUSIVENESS, DIGITAL TRANSFORMATION, AND RENEWABLE ENERGY FOR A BETTER FUTURE
Publisher : Universitas Nahdlatul Ulama Al Ghazali Cilacap

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Spatial presentation of data can provide broader information about an event or a feature that can facilitate drawing conclusions, for example using webGIS. WebGIS development in Klaten Regency has been implemented to display school data using licensed tools, but no development has been carried out using open source tools so that it is easy to customize. So, the development of a webGIS prototype is needed for the management and assessment of school data in Klaten Regency using open source tools. The system development methodology used is the waterfall model, with the phases of requirements analysis, design, implementation, and testing. The system was developed using the PHP language framework Code Igniter 4, MySQL database, front-end development in displaying maps using Leaflet.js and OpenStreetMap libraries. Spatial data of sub-district areas in the form of polygons is displayed using JSON and AJAX technology. School spatial data is displayed in the form of location point markers with school profile pop-ups. Functionality testing is carried out using the black box testing method resulting in all features functioning according to their functions.