Claim Missing Document
Check
Articles

Found 5 Documents
Search

Pendampingan Pembuatan dan Pengelolaan Sistem Informasi Desa dan Covid-19 Adam, Riza Ibnu; Voutama, Apriade; Suci, Farradina Choria; Efelina, Vita; Ramadhan Sumantri, Muhammad Jodi
Communautaire: Journal of Community Service Vol. 2 No. 1 (2023)
Publisher : Al-Qalam Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (676.862 KB) | DOI: 10.61987/communautaire.v2i1.25

Abstract

Pasirjengkol Village is a village that is domiciled in Majalaya District, Karawang Regency. So far, they have experienced difficulties with information systems in the form of websites related to the Covid-19 pandemic, so they have never created or managed information systems for the public. The problems encountered are due to the limited ability of village government officials and employees in creating and managing information systems, as well as limited operational support facilities and infrastructure including computers. There are community service activities through mentoring activities, creation and management of a Covid-19 information system that is capable of assisting the routine operations of the Covid-19 task force in Pasirjengkol Village and compiling a guidebook for using the website-based Covid-19 information system in Pasirjengkol Village.
Pengaruh Dimensi Volume Bentuk Core Terhadap Sifat Mekanik Aluminium Sandwich Panel Structure Honeycomb, Banana Tree Trunks, Dan Spiderweb Suprayogi, Farid; Naubnome, Viktor; Suci, Farradina Choria
TEKNIKA Vol. 15 No. 2 (2021): Teknika Juli - Desember 2021
Publisher : Politeknik Negeri Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5281/zenodo.13368286

Abstract

Pengunaan material yang kuat tetapi ringan sangatlah penting pada struktur pesawat terbang, salah satu material yang digunakan pada pesawat terbang ialah komposit honeycomb sandwich panel. Tujuan dari penelitian ini ialah penulis ingin menyelidiki karakterisitik dengan membandingkan kekuatan tekan dan tekuk pada komposit honeycomb sandwich panel apabila struktur corenya divariasikan ke bentuk yang berbeda dari bentuk asalnya, seperti struktur yang terinspirasi dari alam dan beberapa peneliti sudah menggunakannya pada berbagai bidang kontruksi seperti serat batang pohon pisang (banana tree trunks) yang sudah banyak dikembangkan menjadi campuran material komposit, maupun struktur jaring laba-laba (cobwebs) yang banyak diaplikasikan pada kontruksi podasi gedung, apakah memiliki karakterisitik yang sama dengan struktur honeycomb sandwich atau lebih baik dari struktur sebelumnya. Pembuatan komposit sandwich panel menggunakan bahan dasar plat aluminium 1100 dengan dimensi yang sama sesuai standar ASTM dan pembuatan core dilakukan dengan metode press dengan dimensi core 6 cm. Pengujian tekuk mengacu pada standar ASTM C393/C393M-16 dan pengujian tekan mengacu pada standar ASTM C365/C365M-16. Hasil pengujian menunjukkan bahwa variasi struktur core banana tree trunks sandwich panel memiliki nilai kuat tekan sebesar 9,68 N/mm² dan nilai kuat lentur sebesar 1,5162 N/mm. Dari hasil penelitian ini menunjukkan bahwa kekuatan tekan dan kekuatan lentur pada komposit sandwich panel structure dapat dipengaruhi oleh proses pembuatan spesimen komposit sandwich structure yang membutuhkan ketelitian lebih dan kerapatan antar bagian structure cell tersebut.
Effect of Doping Density and Parasitic Resistances on The Performance of Perovskite Solar Cells-based Graphene Oxide as Hole Transport Layer by SCAPS-1D Fauji, Najmudin; Kardiman, Kardiman; Suci, Farradina Choria; Hakim, Muhammad Fahmi; Efelina, Vita; Widianto, Eri
POSITRON Vol 14, No 2 (2024): Vol. 14 No. 2 Edition
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam, Univetsitas Tanjungpura

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26418/positron.v14i2.74606

Abstract

Perovskite solar cells (PSCs) have demonstrated remarkable improvement and promise to be produced as large-scale, low-cost devices. Several resistive losses, such as the loss current, the trapping, and the recombination of charge carriers, significantly inhibited the performance of PSCs. Typically, the series resistance (RS) and shunt resistance (RSH) of the devices influence these kinds of losses. In this study, we conduct a simulation analysis to investigate the effect of doping density and parasitic resistances (RS and RSH) on the performance of PSCs-based graphene oxide (GO) as a hole transport layer (HTL) using the SCAPS-1D. The doping density variations in HTL demonstrate improved power conversion efficiency (PCE) and fill factor (FF) as the doping density increases. Both RS and RSH significantly affect the PSC performance, as they control the shape and slopes of the current density (J-V) characteristic. The optimization method produced impressive results, including an open-circuit voltage of 0.94 V, a short-circuit current density of 22.51 mA.cm−2, a fill factor of 78.92%, and a power conversion efficiency of 16.75%. This study leads to a basic understanding of the physics of PSC devices. The proposed design provides a systematic analysis method for photovoltaic science and technology.
Analisis Performansi PLTS Off-Grid 600 Wp menggunakan Data Akuisisi berbasis Internet of Things STEFANIE, ARNISA; SUCI, FARRADINA CHORIA
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 9, No 4: Published October 2021
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v9i4.761

Abstract

ABSTRAKPLTS pada penelitian ini didesain dengan sistem Off-Grid dengan kapasitas 600 Wp yang terhubung dengan MPPT 50 A, DC 150V dan energi output disimpan pada baterai VRLA 100 Ah. Pemanfaatan teknologi Internet of Things dengan komunikasi data menggunakan jalur komunikasi serial dengan modul ESP 8266. Pengujian dilakukan dengan memasang PLTS dengan kemiringan 300 pada koordinat wilayah -06°33’25’’, 107°12’39’’. Analisis data dilakukan untuk membaca performa daya output dan membandingkan dengan data total photovoltaic power output (Wh) yang dirilis Global Solar Atlas. Sampel data diambil pada bulan September 2020, 06.00-18.00 WIB, yang menunjukkan bahwa rentang waktu kerja efektif PLTS adalah 07.00-08.00 WIB dengan daya output ±140 watt, dimana mendekati nilai total photovoltaic power output adalah 143 Wh.Kata kunci: PLTS, Off-Grid, Internet of Things, power output ABSTRACTThis Solar Power Plant is designed with an Off-Grid system with a capacity of 600 Wp connected to MPPT 50 A, DC 150V, and the output energy stored in a VRLA 100 Ah battery. Utilization of Internet of Things technology with data communication by serial communication line using the ESP 8266 module. Testing was carried out by installing Solar Power Plants with a slope of 300 at the coordinates of the area -06 ° 33'25 '', 107 ° 12'39 ''. Data analysis was carried out to read the output power performance and compare it with the Total photovoltaic power output (Wh) data released by Global Solar Atlas. Data samples were taken in September 2020 at 06.00-18.00 WIB, which shows the effective working time gap of PLTS at 07.00-08.00 WIB with an output power of ± 140 watts is close to the total photovoltaic power output value of 143 Wh.Keywords: Solar Power Plants, Off-Grid, Internet of Things, power output
Solusi Permasalahan Sisa Produk Industri FMCG Menjadi Sabun Cuci Piring Niantoro, Berio Sofyan; Adzillah, Wilma Nurrul; Ratnawati, Kania; Suci, Farradina Choria
TEKNIKA Vol. 19 No. 2 (2025): Teknika Mei 2025
Publisher : Politeknik Negeri Sriwijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5281/zenodo.14751974

Abstract

PT. X yang berlokasi di Kabupaten Karawang memiliki permasalahan terkait dengan produk sampo berlebih yang dihasilkan. Salah satu produk inovasi yang dapat dibuat adalah sabun cuci piring. Inovasi produk perlu dilakukan sebagai preventif pencemaran lingkungan yang dapat timbul, perusahaan dapat mencapai target zero waste dan membantu Badan Usaha Milik Desa (BUMDes) melalui kegiatan Coorporate Social Responsibility (CSR) PT. X. Penelitian ini menggunakan metode trial and error serta dilakukan pengujian dengan parameter berupa pH, gravitasi spesifik, dan viskositas untuk memastikan produk yang dibuat berkualitas. Hasil pengujian akan dibandingan dengan SNI dan produk komersial. Hasil pengujian menunjukkan formulasi terbaik memiliki nilai pH 4,98, gravitasi spesifik 1,019, dan viskositas 424,8 cPs. Pengolahan sisa produk sampo menjadi sabun cuci piring dapat menjadi solusi produk inovatif sebagai pencegahan pencemaran lingkungan, mencapai target zero waste, dan menaikkan sirkular ekonomi masyarakat sekitar.