Claim Missing Document
Check
Articles

Color Filter Identification for Bidirectional Visible Light Communication DARLIS, ARSYAD RAMADHAN; LIDYAWATI, LITA; JAMBOLA, LUCIA
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 6, No 2 (2018): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v6i2.303

Abstract

ABSTRAKSaat ini, cahaya tampak dimanfaatkan oleh manusia hanya sebagai penerangan saja. Akan tetapi, beberapa penelitian telah membuktikan bahwa cahaya tampak dapat dimanfaatkan pula pada sistem komunikasi, yang dinamakan Visible Light Communication (VLC). Pada penelitian ini, sebuah metoda menggunakan color filter diidentifikasi dalam mengimplementasikan sistem bidirectional pada teknologi VLC. Dengan adanya penelitian ini, sebuah sistem bidirectional Visible Light Communication (Bi-VLC) dapat diimplementasikan dengan menggunakan color filter tertentu yang dipasangkan pada posisi uplink dan downlink. Sinyal informasi berupa sinyal audio ditansmisikan melalui VLC transmitter (Tx) yang dipasang color filter dan diterima oleh color filter pada VLC receiver (Rx) setelah melalui media cahaya. Pengujian menunjukan bahwa sistem telah dapat melewatkan sinyal pada frekuensi audio dengan jarak maksimum dari sistem adalah 2,3 m. Sedangkan pasangan color filter yang memiliki kinerja paling baik untuk BI-VLC adalah Azure (Tx) dengan Charteuse Green (Rx), Charteuse Green (Tx) dengan Charteuse Green (Rx), dan Rose (Tx) dengan Charteuse Green (Rx).Kata kunci: Bidirectional, Visible Light Communication (VLC), Color Filter, AudioABSTRACTCurrently, visible light are utilized by humans as illumination only. However, several research have proven that visible light can also be used in communication systems, called Visible Light Communication (VLC). In this research, a method of using color filters was identified for bidirectional systems on VLC technology. With this research, a bidirectional Visible Light Communication (Bi-VLC) system can be implemented using a specific color filter paired in uplink and downlink mode. The audio signal as information is transmitted through a VLC transmitter (Tx) installed by a color filter and received by the color filter on the VLC receiver (Rx) after going through the light media. The result shows that the system has been able to pass the signal at the audio frequency with the maximum distance of the system is 2.3 m. While the best performance of color filter pair for BI-VLC is Azure (Tx) with Charteuse Green (Rx), Charteuse Green (Tx) with Charteuse Green (Rx), and Rose (Tx) with Charteuse Green (Rx).Keywords: Bidirectional, Visible Light Communication (VLC), Color Filter, Audio
Implementasi Reflector Antena Wajanbolik Pada Layanan EVDO (Evolution Data Optimized) BIMA, BIMA; LIDYAWATI, LITA; DARLIS, ARSYAD RAMADHAN
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 1, No 1 (2013): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v1i1.1

Abstract

ABSTRAKAntena merupakan perangkat yang memiliki peranan yang sangat penting dalam sistem komunikasi tanpa kabel (wireless). Pada penelitian ini akan diimplementasikan reflektor antena wajanbolik yang beroperasi pada frekuensi CDMA 2000 1x EVDO 1900 MHz. Antena ini menggunakan  reflektor dari wajan, dengan waveguide dari pipa paralon yang dilapisi dengan lakban alumunium, dan penerima sinyal menggunakan USB modem adapter. Antena ini ditujukan untuk menjadi media bantu  dalam  memperkuat  penerimaan sinyal  EVDO dan memaksimalkan dan kecepatan transfer data. Antena ini memberikan gain sebesar 15,530 dB berdasarkan pengukuran dan 15,156 dB berdasarkan teoritis. Pengujian menggunakan wajanbolik menunjukkan adanya peningkatan level sinyal modem yang terendah sebesar 4 dB pada pengukuran dengan kondisi indoor di siang hari serta tertinggi sebesar 19 dB pada pengukuran dengan kondisi outdoor di malam hari. Hasil dari pengujian pun menunjukkan peningkatan kecepatan transfer data rata ? rata sebesar 42 KBps sampai dengan 269 KBps dibandingkan pengukuran tanpa wajanbolik.Kata kunci: Reflektor, Waveguide, Wajanbolik, USB adapter, EVDO.  ABSTRACTThe antenna is a device that has a very important role in wireless communication systems (wireless). In this research will be implemented wajanbolik reflector antenna which operates at frequencies of CDMA 2000 1x EVDO 1900 MHz. This antenna uses a reflector of the pan, with the waveguide of the pipe is coated with aluminum duct tape, and a signal receiver using a USB modem adapter. This antenna is intended to be a media aids in strengthening the EVDO and signal reception to maximize data transfer speeds. This antenna give a gain of 16.015 from measurement dBi and 15.156 dBi based on theory. Tests using wajanbolik showed an increase in the level of modem signals a low of 4 dB in measurement with indoor conditions during the day and 19 dB at the peak of measurements with outdoor conditions at night. Results of testing also showed an increase in average data transfer rate is 42 KBps up to 269 KBps compared to measurements without wajanbolik.Keywords:  Reflector, Waveguide, Wajanbolic, USB adapter, EVDO.
Perancangan dan Implementasi Duplexer Mikrostrip untuk Frekuensi LTE pada band ke-7 DARLIS, ARSYAD RAMADHAN; DEWI, HARIANTI ASRI; SULAEMAN, ENCENG
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 1, No 2 (2013): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v1i2.68

Abstract

ABSTRAKKebutuhan akan komunikasi bergerak semakin mengalami peningkatan dalam dunia teknologi yang ada saat ini, maka hadirlah teknologi terbaru yaitu Long Term Evolution (LTE). Dengan teknik duplex jenis Frequency Division Duplex (FDD), dirancanglah duplexer yang mampu melakukan proses pengiriman dan penerimaan dalam satu waktu dengan frekuensi yang berbeda antara uplink dan downlink. Pada penelitian ini dirancang dan diimplementasikan sebuah duplekser dengan menggunakan metoda Hybrid Coupler dan Bandstop Filter berbasis Split Ring Resonator untuk band frekuensi ke-7 pada teknologi LTE di sisi Base Transceiver Station (BTS). Duplekser dibuat dengan menggabungkan dua buah hybrid Coupler dan dua buah Bandstop Filter. Hasil pengukuran duplexer saat port Tx mengirimkan sinyal ke antena dengan nilai redaman pada frekuensi tengah downlink sebesar 3.168 dB. Lalu pada saat antena menerima sinyal untuk diteruskan ke Rx terdapat redaman di frekuensi tengah uplink sebesar 6 dB. Sedangkan untuk isolasi dari port Tx-port Rx dihasilkan sebesar 15 dB.Kata kunci: Duplexer, Bandstop Filter, Split Ring Resonator, Hybrid Coupler, dan Long Term Evolution.ABSTRACTThe necessary of mobile communication has increased in technology, now it released the new of technology is Long Term Evolution (LTE). Type of duplex is Frequency Division Duplex (FDD), designed a duplexer which it is capable for transmitting and receiving process at the same time with the different of frequency between uplink and downlink. Research of designed and implemented a duplexer using Hybrid Coupler and Bandstop filters based on Split Ring Resonators for the frequency band 7th on LTE technology at Base Transceiver Station (BTS). Duplexer is made by combining two coupler and two bandstop filter. The results of duplexer measurements, when Tx port transmit the signal to antenna port with attenuation at the downlink frequency center at 3.168 dB. Attenuation from antenna port to Rx port about 6 dB. Isolation between Tx port and Rx port about 15 dB.Keywords: Duplexer, Bandstop Filter, Split Ring Resonator, Hybrid Coupler, and Long Term Evolution.
Simulasi Sinkronisasi Carrier pada Modulasi Digital menggunakan Matlab ARYANTA, DWI; DARLIS, ARSYAD RAMADHAN; FARHANI, WIRDA SRI
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 2, No 2 (2014): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v2i2.100

Abstract

ABSTRAKDalam sistem komunikasi digital, salah satu manfaat teknik pengkodean adalah sebagai efisiensi bandwidth. Pada kanal komunikasi, adanya noise akan mengganggu dan  menurunkan kinerja sistem komunikasi digital. Hal ini menyebabkan terjadinya kesalahan pendeteksian sinyal pembawa, yang mengakibatkan terjadi perubahan bit atau simbol pada sisi penerima. Untuk mengurangi kesalahan deteksi, maka dibutuhkan suatu mekanisme sinkronisasi carrier di sisi penerima untuk mendapatkan data yang serupa dengan data yang dikirim. Simulasi sinkronisasi carrier pada penelitian ini menggunakan metode carrier phase recovery pada modulasi digital M-PSK dan M-QAM dengan level modulasi 4 sampai dengan 32, menggunakan software Matlab versi 7.9. Hasil pengujian sistem yang telah dilakukan pada Eb/No dengan rentang 0 hingga 30 dB menunjukkan, adanya peningkatan kinerja sistem pada modulasi M-PSK dari 0,01352 sampai dengan 0,8546, dan pada modulasi M-QAM dari 0,0256  sampai dengan 0,7867.Kata Kunci: M-PSK, M-QAM, Kanal AWGN, BER, Eb/No, Phase RecoveryABSTRACTThe digital communication systems, one of the benefits coding techniques are as bandwidth efficiency. The communication channel, the presence of noise will disrupt and degrade the performance of digital communication systems. This leads to error detection of the carrier, resulting in a change of bits or symbols at the receiver side. To reduce the detection error, there is a need carrier synchronization at the receiver side to obtain similar data with the data sent. Simulation of carrier synchronization in this study using the carrier phase recovery method in digital modulation M-PSK and M-QAM modulation with levels 4 to 32, using Matlab software version 7.9. The results of system testing has been done on the Eb / No ranging from 0 to 30 dB shows, an increase in the performance of the system on the M-PSK modulation from 0.01352 to 0.8546, and the M-QAM modulation from 0.0256 to 0 , 7867. Keywords: M-PSK, M-QAM, AWGN Channel, BER, Eb/No, Phase Recovery
Implementasi Sistem IP PBX menggunakan Briker ARYANTA, DWI; DARLIS, ARSYAD RAMADHAN; PRATAMA, ARDHIANSYAH
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 1, No 2 (2013): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v1i2.117

Abstract

ABSTRAKVoIP (Voice over Internet Protocol) adalah komunikasi suara jarak jauh yang digunakan melalui jaringan IP. Pada penelitian ini dirancang sistem IP PBX dengan menggunakan teknologi berbasis VoIP. IP PBX adalah perangkat switching komunikasi telepon dan data berbasis teknologi Internet Protocol (IP) yang mengendalikan ekstension telepon analog maupun ekstension IP Phone. Software VirtualBox digunakan dengan tujuan agar lebih memudahkan dalam sistem pengoperasian Linux yang dimana program untuk membuat IP PBX adalah menggunakan Briker yang bekerja pada Operating System Linux 2.6. Setelah proses penginstalan Briker pada Virtualbox dilakukan implementasi jaringan IP PBX. Setelah mengimplementasikan jaringan IP PBX sesuai dengan topologi, kemudian melakukan pengujian success call rate dan analisis Quality of Service (QoS). Pengukuran QoS menggunakan parameter jitter, delay, dan packet loss yang dihasilkan dalam sistem IP PBX ini. Nilai jitter sesama user Briker (baik pada smartphone maupun komputer) mempunyai rata-rata berada pada nilai 16,77 ms. Sedangkan nilai packetloss yang didapat pada saat terdapat pada saat user 1 sebagai pemanggil telepon adalah 0%. Sedangkan persentase packet loss pada saat user 1 sebagai penerima telepon adalah 0,01%. Nilai delay pada saat berkomunikasi antar user berada pada 11,75 ms. Secara keseluruhan nilai yang didapatkan melalui penelitian ini, dimana hasil pengujian parameter-parameter QOS sesuai dengan standar yang telah direkomendasikan oleh ITU dan didapatkan nilai QoS dengan hasil ?baik?.Kata Kunci: Briker, VoIP, QoS, IP PBX, Smartphone.ABSTRACTVoIP (Voice over Internet Protocol) is a long-distance voice communications over IP networks are used. In this study, IP PBX systems designed using VoIP -based technologies. IP PBX is a telephone switching device and data communication technology-based Internet Protocol (IP) which controls the analog phone extensions and IP Phone extensions. VirtualBox software is used in order to make it easier for the Linux operating system to create a program which is using briker IP PBX that works on Linux 2.6 Operating System. After the installation process is done briker on Virtualbox IP PBX network implementation. After implementing the IP PBX network according to the topology, and then do a test call success rate and analysis of Quality of Service (QoS). Measurement of QoS parameters using jitter, delay, and packet loss resulting in the IP PBX system. Jitter value briker fellow users (either on a smartphone or computer) has been on the average value of 16.77 ms. While the values obtained packetloss when there is 1 user when a phone caller is 0%. While the percentage of packet loss at user 1 as a telephone receiver is 0.01%. Delay value when communicating between users located at 11.75 ms. Overall value obtained through this study , where the results of testing the QOS parameters in accordance with the standards recommended by the ITU and the QoS values obtained with the results "good".Keywords: Briker, VoIP, QoS, IP PBX, Smartphone.
Perancangan Dan Implementasi Antena Yagi 2.4 GHz Pada Aplikasi WIFI (Wireless Fidelity) PRATAMA, BUDI; LIDYAWATI, LITA; DARLIS, ARSYAD RAMADHAN
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 1, No 1 (2013): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v1i1.35

Abstract

ABSTRAKPenggunaan teknologi komunikasi dengan menggunakan kabel kini sudah tergantikan oleh teknologi komunikasi tanpa kabel, dimana kebanyakan pengguna menggunakan perangkat access point yang memiliki jangkauan pancaran terbatas karena pola radiasi omnidirectional, sehingga diperlukan antena yang mempunyai pola radiasi directional untuk jangkauan pancaran yang lebih terarah. Antena yagi merupakan salah satu yang dapat digunakan untuk mengatasi masalah ini. Dalam penelitian ini, antena Yagi yang dirancang dapat diaplikasikan pada sistem WLAN. Hasil dari implementasi didapatkan bahwa antena Yagi dapat bekerja pada frekuensi kerja WLAN 2,4 GHz. Dan selainitudiperoleh level kuat medan dengan rata-rata peningkatan penguatan antena yagi terhadap antena omni sebesar 12,1 dB. Disamping itu diperoleh gain antena yagi sebesar 16 dB sedangkan hasil simulasi sebesar 10 dB, beamwidth vertikal 250 dan horizontal 260, dan bandwidth antena 150 MHz, Pada penelitian ini hasil yang didapatkan dibandingkan dengan hasil dari software vistumbler dan SuperNEC 2.9.Kata kunci: Access point, antenna yagi, directional, vistumbler, 2,4 GHz, SuperNEC 2.9ABSTRACTThe use of communication technologies by using cable technology has now been replaced by wireless communication, whichmost usersuse theaccess point device that has a limited range due to beam omnidirectional radiation pattern, so that the required antenna that has a directional radiation pattern to reach a more focused beam. Yagi antenna is one that can be used to overcome this problem. In this study, Yagi antenna is designed to be applied in WLAN system. Results obtained from the implementations that Yagi antennas can work at the operating frequency of 2.4 GHz WLAN. And besides it is obtained strong level terrain with an average increase of the antenna yagi antenna gain of 12.1dB omni. Besides, obtained yagi antenna gai nof 16 dB, while the simulation result sat 10 dB, 250 vertical and horizontal beamwidth of 260, and a bandwidth of 150 MHz antennas, In this study,the results obtained are compared with the results of the software vistumbler and SupeNEC 2.9.Keywords: Accesspoint, yagi antennas, directional, vistumbler, 2.4 GHz, SuperNEC 2.9
Implementasi Sistem Penyiaran Musik Digital di Kafe menggunakan Visible Light Communication DARLIS, DENNY; DARLIS, ARSYAD RAMADHAN; ABIBI, MUHAMMAD HIDAYAT
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 5, No 1 (2017): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v5i1.60

Abstract

ABSTRAKTeknologi penyiaran dengan frekuensi radio menggunakan teknik modulasi frekuensi (FM) telah dikenal sejak lama. Teknologi ini memfasilitasi pengiriman suara melalui sinyal analog dari pemancar kepada penerima. Pengembangan teknologi komunikasi menggunakan cahaya tampak yang memanfaatkan lampu LED sebagai pengirim informasi cukup banyak dilakukan. Pada penelitian ini diimplementasi sistem pengiriman dan penerimaaan siaran musik digital dengan memanfaatkan cahaya tampak yang berasal dari lampu penerangan di kafe. Sistem visible light communication (VLC) diimplementasikan dengan menggunakan metoda modulasi intensitas dan deteksi langsung (IM/DD). Dari hasil pengujian dapat ditunjukkan bahwa sistem ini dapat melewatkan siaran musik digital dengan redaman rata-rata 7,77 dB pada jarak maksimal adalah 3 meter. Hasil dari sistem yang telah dirancang dan diimplementasikan menunjukan hasil yang baik sehingga layak untuk diterapkan pada system penyiaran musik digital di kafe.Kata kunci: Visible Light Communication, IM/DD, Sistem Penyiaran Musik Digital, Sistem Penerangan Kafe.ABSTRACTBroadcasting technology uses radio frequency and technique of frequency modulation (FM) has been known for a long time. This technology allows the transmission of voice through analog signals from transmitter to receiver. Currently, many research on visible light communication technology utilizes LED lights as the sender. In this paper presented the results of transmitter and receiver system implementation of digital musik broadcast for use in the cafe. Visible light communication (VLC) system is implemented using intensity modulation and direct detection (IM/DD) method. From the test results can be shown that this system can pass digital musik broadcast with an average attenuation of 7.77 dB at maximum distance is 3 meters. Results of the system that has been designed and implemented shows good results, so it deserves to be applied to the digital musik broadcasting system in the cafe.Keywords: Visible Light Communication, IM/DD, Radio Broadcasting, Café Lighting.
Implementasi Visible Light Communication (VLC) Pada Sistem Komunikasi DARLIS, ARSYAD RAMADHAN; LIDYAWATI, LITA; NATALIANA, DECY
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 1, No 1 (2013): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v1i1.13

Abstract

ABSTRAKPerkembangan teknologi telah menunjukkan peningkatan yang cukup signifikan, terutama untuk bidang komunikasi. Hal ini terbukti dengan banyaknya media komunikasi baik itu nirkabel dan kabel. Pada penelitian ini dimanfaatkan cahaya tampak sebagai media dalam sistem komunikasi, dimana selama ini cahaya hanya digunakan sebagai penerangan saja. Visible Light Communication (VLC) adalah sebuah teknologi komunikasi yang memanfaatkan pancaran cahaya tampak dari lampu pada sistem komunikasi. Sistem komunikasi visible light ini terdiri dari pemancar dan penerima. Pemancar terdiri dari Light Emitting Dioda, audio transformator dan baterai, dan pada penerima terdiri dari solar cell dan photodioda, amplifier dan catu daya. Hal-hal yang dapat mempengaruhi hasil output sistem komunikasi adalah jarak, terang cahaya lampu pemancar dan cahaya luar. Pada penelitian ini, komunikasi menggunakan VLC dapat dilakukan pada jarak pengiriman data sebesar 2,5 m dan dengan range frekuensi 600 Hz sampai dengan 45 kHz dimana data dapat disalurkan dengan baik.Kata kunci: Visible light, Sistem komunikasi, Light Emitting Dioda, solar cell, photodioda.ABSTRACTTechnological developments have shown a significant increase, especially in the field of communication. This is proved by the many communications media using both wireless and wired. This study utilized the visible light as a medium of communication system, which has been used as an illumination light only. Visible Light Communication (VLC) is a communication technology which utilize visible light emitted from the lamp in the communication system. The visible light communication system consists of a transmitter and receiver. The transmitter consists of a Light Emitting Diode, audio transformer and battery, and the receiver consists of a solar cell and a photodiode, amplifier and power supply. Things that can affect the output of the communication system is the distance, bright light and outdoor light. In the research, the results that obtained from this study is the data transmission distance of 2.5 m and a frequency range of 600 Hz to 45 kHz data can be routed properly.Keywords:  Visible light, Communication systems, Light Emitting Dioda, solar cell, photodioda.
Sistem Komunikasi Suara Bawah Air dengan Metoda Simplex menggunakan Visible Light Communication (VLC) JAMBOLA, LUCIA; DARLIS, ARSYAD RAMADHAN; LIDYAWATI, LITA; HUSAENI, DZIKRI FACHRI
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 7, No 2 (2019): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v7i2.253

Abstract

ABSTRAKSistem komunikasi suara bawah air telah dikenal sejak lama, diantaranya sonar dan akustik. Seiring perkembangan zaman dan kemajuan teknologi, kini hadir komunikasi dengan media transmisi cahaya tampak yaitu Visible Light Communication (VLC) yang dapat diterapkan pada komunikasi bawah air. Pada penelitian ini telah dilakukan komunikasi suara bawah air (simplex) menggunakan VLC, dengan media akuarium berisi air dan beberapa pengujian diantaranya menggunakan color filter, didapat hasil pengujian terbaik yaitu tegangan 4,4 Vpp dan frekuensi 3,003 kHz untuk color filter yellow, pengujian menggunakan lensa didapat hasil pengujian terbaik yaitu tegangan 4,4 Vp-p dan frekuensi 3,051 kHz untuk lensa (+50), dan pengujian terakhir menggunakan lampu UV didapat hasil pengujian terbaik dengan tegangan 4,4 Vp-p dan frekuensi 3,010 kHz. Implementasi sistem VLC ini menunjukkan hasil yang baik dan layak untuk diterapkan pada komunikasi suara bawah air (simplex).Kata kunci: VLC, Komunikasi Suara Bawah Air, Simplex. ABSTRACTUnderwater voice communication systems have been known for a long time, including sonar and acoustics. Along with the development and advancement of technology, now there is communication with visible light transmission media, namely Visible Light Communication (VLC) which can be applied to underwater communication. Under this study underwater voice communication (simplex) has been carried out using VLC, with aquarium media containing water and several tests including using a color filter, the best test results obtained are voltage 4.4 Vp-p and frequency 3.003 kHz for yellow color filter, testing using the lens obtained the best test results namely voltage 4.4 Vp-p and frequency 3.051 kHz for lenses (+50), and the last test using UV lights obtained the best test results with a voltage of 4.4 Vp-p and a frequency of 3.010 kHz. The implementation of the VLC system shows good and feasible results to be applied to underwater voice communication (simplex).Keywords: VLC, Underwater Voice Communication, Simplex.
Deep Learning RetinaNet based Car Detection for Smart Transportation Network DEWI, IRMA AMELIA; KRISTIANA, LISA; DARLIS, ARSYAD RAMADHAN; DWIPUTRA, REZA FADILAH
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 7, No 3 (2019): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v7i3.570

Abstract

ABSTRAKDeteksi objek yang merupakan salah satu bagian utama dari sistem Smart Transportasion Network (STN) diajukan pada penelitian ini. Penelitian ini menggunakan salah satu model STN yaitu Infrastructure-to-Vehicle (I2V), dimana sistem ini bekerja dengan mendeteksi kendaraan mobil menggunakan model arsitektur RetinaNet dengan backbone Resnet101 dan FPN (Feature Pyramid Network), kemudian hasil deteksi mentrigger VLC transmitter yang terpasang di lampu penerangan jalan mengirimkan sinyal informasi menuju VLC receiver yang dipasang di mobil. Pada tahap proses training, jumlah dataset mobil yang digunakan adalah sekitar 1600 image dan 400 validation image serta pengulangan proses sebanyak 100 epoch. Berdasarkan 50 kali pengujian pada image test, diperoleh nilai precision mencapai 86%, nilai recall mencapai 85% dan f1-score mencapai 84%.Kata kunci: Object detection, RetinaNet, Resnet101, STN, VLC, I2V ABSTRACTObject detection is one of the main part in Smart Transportation Network (STN) system proposed in this research. This research used one of the STN models, namely Infrastructure-to-Vehicle (I2V), a system works by detecting car using RetinaNet architecture model with ResNet 101 and FPN (Feature Pyramid Network) as backbone, then the detection result triggers VLC transmitter set up on the street lighting to transmit information signal to the VLC receiver which set up in the car. At the training process stage, the number of car datasets is approximately 1600 images, 400 validation images and repetition of processes about 100 epochs. Based on the 50 times testing process on a image test, it is obtained 86% of a precision value, by reaching 85% of recall value, and 84% of f1-score. Keywords: Object detection, RetinaNet, Resnet101, STN, VLC, I2V