Claim Missing Document
Check
Articles

Found 21 Documents
Search

Analisis Beban Kerja Mental pada Pekerja di PT XYZ dengan Menggunakan NASA TLX Chalis Fajri Hasibuan; M Banjarnahor
Jurnal Ergonomi dan K3 Vol 4, No 1 (2019): MARET 2019
Publisher : Perhimpunan Ergonomi Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (430.96 KB) | DOI: 10.5614/j.ergo.2019.4.1.4

Abstract

Pekerja adalah ujung tombak berjalannya sebuah usah, tuntutan tugas dan target produksi membuat operator mengalami tekanan mental yang tinggi sehingga apabila terjadi terus menerus akan mengakibatkan tingkat stress yang meningkat dan menurunnya tingkat performansi, efesiensi, dan produkstivitas pekerja. Penelitian ini dilakukan dengan tujuan untuk mengevaluasi beban kerja mental pada pekerja di PT XYZ yang bergerak dibidang perkebunan. Dari hasil pengukuran beban mental dengan menggunakan NASA TLX diperoleh, menunjukkan bahwa beban kerja tertinggi terjadi pada reception station (whinch rope whinch operator) 82,33% dan indikator physical demand merupakan indikator yang dominan mempengaruhi beban kerja mental operator. Perlu diberikan suatu usulan perbaikan yaitu pemberian waktu isirahat tambahan di sela-sela waktu kerja, rotasi operator, pengaturan shift kerja dan perbaikan kebiasaan individual operator ketika bekerja.
Faktor-Faktor Dan Pengukuran Cybersickness Pada Driving Simulator: Tinjauan Pustaka Chalis Fajri Hasibuan
Jurnal Rekayasa Sistem Industri Vol. 12 No. 1 (2023): Jurnal Rekayasa Sistem Industri
Publisher : Universitas Katolik Parahyangan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (303.285 KB) | DOI: 10.26593/jrsi.v12i1.6547.113-124

Abstract

A driving simulator is one of the research tools used to identify the causes of traffic accidents on the highway. While driving simulators are frequently used in research, there is concern that HMD-based driving simulators may cause a side effect for the user known as cybersickness. Various factors are widely used to identify the formation of cybersickness from various virtual environments with different results on the formed cybersickness. In contrast, the factors that influence the formation of cybersickness using driving simulators using virtual reality based on HMD have not been identified whether they produce the same or different research results, so that it can make a difference in further research. The purpose of this study is to conduct a literature review of the factors used to identify cybersickness formed in the use of driving simulators using HMD-based virtual reality and the results of using these factors. The method used by searching articles from databases includes Google Scholar, Science Direct, Scopus, Springer and IEEE with relevant keywords. In the initial search, the terms 'VR sickness', 'cybersickness', 'motion sickness', 'simulator sickness', 'visually induced motion sickness', 'virtual reality', and 'driving simulator', were eliminated using the PRISMA method. Of the 653 articles obtained, 17 were analyzed regarding driving simulators using HMD-based virtual reality. The results found factors that influence the formed cybersickness, such as gender, user age, experience, user posture, duration of use, the hardware used, Field Of View (FOV), congenital diseases and time of use. Of the 17 articles analyzed, there was no difference in the results of the factors used to identify the formed cybersickness.
PERANCANGAN PRODUK TAS TRAVEL MULTIFUNGSI DENGAN MENGGUNAKAN METODE QUALITY FUNCTION DEPLOYMENT (QFD) Hasibuan, Chalis Fajri; Sutrisno, Sutrisno
Jurnal Sistem Teknik Industri Vol. 19 No. 1 (2017): JSTI Volume 19 Number 1 January 2017
Publisher : TALENTA Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (269.721 KB) | DOI: 10.32734/jsti.v19i1.365

Abstract

Tas travel merupakan sarana penyimpanan barang yang sangat penting bagi seorang dalam melakukansuatu perjalanan apalagi professional yang dalam pekerjaan saring berpindah dengan berbagai perlengkapanyang harus disiapkan. Lebih dari 85% orang Indonesia melakukan perjalanan internasional dan nasional untukbersantai sedangkan selebihnya untuk urusan bisnis ataupun pendidikan. melihat peningkatan yang cukup besarmaka penelitian ini bertujuan untuk melakukan perancangan tas travel yang multifungsi untuk mempermudahmasyarakat yang melakukan perjalan sehingga penggunaan tas travel lebih optimal. Penelitian ini menggunakanmetode perancangan produk yaitu Quality Function Deployment (QFD). Hasil karakteristik Perancangan TasTravel yaitu Bentuk tas travel persegi panjang, Bentuk gagang tas travel persegi panjang, Warna tas travel birudan merah bata, Ukuran tas travel dimana panjang 51 dan lebar 26 cm, Tinggi gagang tas travel 45 cm, Tinggibadan tas travel 43 cm, Hiasan/motif pada tas travel polos, Bahan tas travel polimer Bahan gagang tas travelplastic, Bahan roda tas travel aluminium steel, Fungsi tambahan pada tas travel adalah tempat minum dan jashujan
Perbaikan Fasilitas Kerja Untuk Mengurangi Keluhan Musculoskeletal Pada Pekerja Di CV. XYZ Hasibuan, Chalis Fajri; Mustafa, Kamil; Siregar, Doni Marthondi
Jurnal Sistem Teknik Industri Vol. 20 No. 2 (2018): JSTI Volume 20 Number 2 July 2018
Publisher : TALENTA Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (541.719 KB) | DOI: 10.32734/jsti.v20i2.485

Abstract

Keluhan pada sistem muskuloskeletal adalah keluhan yang dirasakan oleh seseorang pada bagian otot dan rangka dengan tingkat keluhan yang berbeda - beda , keluhan hingga kerusakan ini yang biasanya diistilahkan dengan gangguan muskuloskeletal . Pada umumnya gangguan muskuloskeletal terjadi apabila sistem muskuloskeletal menerima beban yang melampaui kapasitasnya dengan durasi pembebanan yang panjang. Pembebanan berlebih pada otot yang menyebabkan otot mengalami kontraksi melebihi 20% dari kekuatan maksimumnya , yang akan berdampak pada kurangnya peredaran darah ke otot . Adapun Tujuan dari penelitian ini adalah untuk mengevaluasi Perbaikan Fasilitas Kerja Pada Alat Pengkilap Panci Untuk Memperbaiki Postur Kerja Pada Perusahan CV. XYZ. Pengukuran ini dilakukan dengan menggunakan metode Rapid Entire Body Assessment ( REBA ) dan menggunakan Standard Nordic Questionnaire ( SNQ ) sebagai instrument penelitian . Penelitian dilakukan dengan metode survei analitik yang bertujuan untuk melihat adanya hubungan antara sikap kerja dengan keluhan musculoskeletal dengan pendekatan cross sectional . Dari hasil kuesioner SNQ pada 6 orang pekerja menunjukkan bahwa keluhan muskuloskeletal yang dialami pekerja pengkilap panci berada pada kategori sakit terbanyak adalah pada leher atas dan leher bawah sebanyak 4 ( 66,7 % ) . Pada kategori sangat sakit terbanyak adalah pada tangan kanan dan pergelangan tangan kanan , tangan kiri dan pergelangan tangan kiri sebanyak 6 ( 100 % ) . Berdasarkan pengukuran dengan metode Rapid Entire Body Assessment REBA dan Uji Chi - Squar e , dinyatakan terdapat skor REBA di antara 8 - 11 dimana skor tersebut berada pada daerah beresiko tinggi terhadap gangguan musculoskeletal dan pada skor REBA usulan yang dilakukan terdapat skor 5 dimana skor tersebut berada pada daerah beresiko Rendah. Sehingga untuk menanggulangi sikap kerja dan postur kerja yang salah berakibat pada timbulnya keluhan musculoskeletal diusulkan sebuah rancangan modifikasi alat kerja yaitu mesin pengkilap panci untuk menekan tingginya angka keluhan muscukuloskeletal pada pekerja pengkilap panci.
Evaluasi Usability Desain Website Perpustakaan Menggunakan Kuesioner Nielsen Attributtes Of Usability Di Universitas Medan Area Ramadhan, Fahmi; Sutrisno, Sutrisno; Hasibuan, Chalis Fajri
Jurnal Ilmiah Teknik Mesin & Industri (JITMI) Vol 3, No 2 (2024): Jurnal Ilmiah Teknik Mesin & Industri (JITMI), November
Publisher : Universitas Medan Area

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31289/jitmi.v3i2.5385

Abstract

Technological advancements in the globalization era have significantly influenced various sectors, including education. The University of Medan Area (UMA) library leverages technology to provide academic information services through its website. This study evaluates the usability of UMA's library website using Nielsen's Attributes of Usability (NAU), which include learnability, efficiency, memorability, errors, and satisfaction. Data were collected through questionnaires and analyzed using validity, reliability tests, and non-parametric statistical methods. The results show a significant correlation between usability dimensions and user satisfaction. Learnability, efficiency, errors, and satisfaction exhibit strong correlations, while memorability demonstrates a moderate correlation. Recommendations focus on improving navigation, organizing content structure, enhancing mobile responsiveness, and integrating social media. These efforts aim to improve accessibility, user engagement, and comfort. The study provides essential insights for developing UMA's library website into a more user-friendly platform that effectively supports students’ and lecturers’ academic success.
Pengukuran Intensitas dan Pemetaan Kebisingan di Area Fatty Acid Plant PT. XYZ C Sirait, benni Pranatal; Sutrisno, Sutrisno; Hasibuan, Chalis Fajri
Jurnal Ilmiah Teknik Mesin & Industri (JITMI) Vol 3, No 2 (2024): Jurnal Ilmiah Teknik Mesin & Industri (JITMI), November
Publisher : Universitas Medan Area

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31289/jitmi.v3i2.5381

Abstract

PT. XYZ is a factory engaged in processing of palm oil derivatives in producing a fatty acid. The machines used in the processing process at PT. Permata Hijau Palm Oleo KIM II Mabar generate the noise. This research aimed to find out the existing noise level and noise mapping, also the proposal of noise control on the production floor. Then, the data collection method conducted through observation using the equivalent noise level (Leq) method and noise mapping was through surfer 14. The data collection conducted in 16 points on the production floor. Furthermore, the result and noise distribution pattern showed that the high noise level was in several points, those were point 5 (85.77); point 6 (86.82); point 7 (86.33), point 8 (88.18); point 10 (86.96); point 13 (86.85); point 14 (87.67). The allowed threshold value refers to the Decree of the Minister of Manpower and Transmigration No.Per.13/MEN/X/2011 is 85 dB. Thus, the company needs to perform noise control such as barrier usage, regularly and scheduled machine maintenance to prevent and decrease the effect of the noise.
IDENTIFIKASI TINGKAT KUALITAS PELAYANAN JASA PENDIDIKAN DENGANMENGGUNAKAN SERVQUALDI FAKULTAS TEKNIK UNIVERSITAS X Chalis Fajri Hasibuan; Sutrisno -
Spektrum Industri Vol. 15 No. 1: April 2017
Publisher : Universitas Ahmad Dahlan Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/si.v15i1.6177

Abstract

Persaingan di dalam dunia pendidikan dewasa ini semakin ketat, khususnya perguruan tinggi, bukan hanya perguruan tinggi dalam negeri saja yang menjadi pesaing tetapi juga perguruan tinggi luar negeri.Minat masyarakat Indonesia semakin tinggi terhadap perguruan tinggi luar negeri yang menawarkan kualitas jasa pendidikan yang lebih baik. Adapun tujuan dalam penelitian ini yaitu Mengukur tingkat kepuasan mahasiswa/i Fakultas Teknik Universitas X terhadap pelayanan jasa yang diberikan oleh Fakultas Teknik Universitas X. Jenis penelitian yang digunakan adalah penelitian deskriptif dengan teknik survey.Metode yang digunakan adalah metode Servqual.Metode servqual digunakan untuk menentukan atribut serta mengukur kesenjangan (gap) antara harapan dengan persepsi konsumen terhadap suatu pelayanan. Hasil penelitian diperoleh gap Dengan nilai terbesar yakni -0.9186 menunjukkan bahwa fasilitas yang diberikan belum sesuai dengan biaya uang kuliah yang dibayarkan oleh mahasiswa sedangkan Tingkat pendidikan Dosen yang mengajar di UMA sudah berpendidikan minimal S2 dengan gap yang bernilai positif sebesar 0.0679 yang mengindekasikan bahwa tingkat harapan yang ada pada mahasiswa lebih rendah dari kinerja yang diberikan oleh Universitas X.
RANCANGAN SHELTER/HALTE BRT MEBIDANG (BUS RAPID TRANSIT MEDAN-BINJAI-DELISERDANG) UNTUK MEMPERMUDAH AKSESBILITAS MASYARAKAT KEBUTUHAN KHUSUS DENGAN PENDEKATAN ERGONOMI Chalis Fajri Hasibuan; Sutrisno Sutrisno
Spektrum Industri Vol. 16 No. 2: Oktober 2018
Publisher : Universitas Ahmad Dahlan Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/si.v16i2.11538

Abstract

Desain shelter yang tersedia saat ini jika dilihat masih jauh dari kemudahan aksesbilitas bagi penyandang cacat sedangkan jumlah penyandang cacat yang terdapat dikota Medan untuk cacat tubuh sebayak 2364 jiwa, Deliserdang 2795 jiwa dan Kota Binjai 280 jiwa banyaknya jumlah penyandang cacat yang terdapat di tiga kota dan kabupaten tersebut mengakibatkan perlunya pelayanan publik berupa kemudahan dalam mengakses fasilitas publik ada di ketiga kabupaten kota tersebut dalam hal ini adalah shelter BRT MEBIDANG. Kemudahan dalam mengakses fasilitas sudah diatur dalam keputusan Menteri Pekerjaan Umum No.468/KPTS/1998 yang telah direvisi melalui peraturan Menteri Pekerjaan Umum No.30/PRT/M/2006 tentang persyaratan teknik fasilitas dan aksesbilitas pada bangunan umum dan lingkungan. Dimensi tubuh yang diukur untuk mendapatkan shelter yang sesuai dimensi tubuh yaitu D Diameter Genggaman, Tinggi Siku Duduk, Lebar Bahu, Tinggi Siku Posisi Tegak, Tinggi Badan Tegak, Panjang Telapak Kaki, Panjang Lengan Bawah, Tinggi Polipteal. Hasil perhitungan kecukupan, keseragaman dan kenormalan diperoleh, data yang diperoleh sudah memnuhi kecukupan data, keseragaman data dan kenormalan data. Hasil pengukuran shelter aktual antara lain Tinggi tangga 0.47 m, Panjang 5.06 m, Lebar 2,02 m, Tinggi awalan 0.47 m, Tinggi tempat naik ke Bus 1,11 m, Hasil  pengukuran dimensi tubuh yang dikonversi menjadi data dalam perancangan shelter dengan data yang diperoleh Diameter Genggaman Halte : 3.406 cm, Tinggi Pegangan Tingkat 1 Jalur Masuk Halte : 17,99, Tinggi Pegangan Tingkat 2 Jalur Masuk Halte : 90,07 cm, Lebar Ramp : 104 cm, Lebar Tangga Masuk : 65 cm, Lebar Pintu Masuk : 169 cm, Tinggi Pintu Masuk : 229.32 cm, Tinggi Anak Tangga : 20 cm, Lebar Anak Tangga : 20.94 cm, Tinggi Tempat Duduk : 37.5 cm
Analisa Perancangan Desain Kemasan Minuman Di Ukm Panggon Ngombe Dengan Metode Kansei Engineering Ratmojo, M. Affandi; Hasibuan, Chalis Fajri; Polewangi, Yudi Daeng
Jurnal Ilmiah Teknik Mesin & Industri (JITMI) Vol 1, No 1 (2022): Jurnal Ilmiah Teknik Mesin & Industri (JITMI), May
Publisher : Universitas Medan Area

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31289/jitmi.v1i1.1221

Abstract

UKM (Small-Medium Business) Panggon Ngombe is one of the Small-Medium Businesses in Medan that produces Beverages. The processed product from UKM Panggon Ngombe is Boba Drink. UKM Panggon Ngombe has problems in marketing their products; one of the reasons is the unattractive product packaging and still not following customer needs. This study aimed to produce Kansei words that were priorities for beverage packaging improvements, to determine the importance of items affected consumer tastes, and to produce packaging category specifications and beverage packaging designs by using the Kansei Engineering method. Kansei Engineering is defined as a methodology to translate human psychological processes towards the expected product design, by defining consumers' expectations identified through Kansei words into product design. The sample used in the study used a survey method, it was a way of taking a sample with a questionnaire as a research tool in a population, and only 100 respondents were studied, so the conclusions showed were limited to objects. The results of the study produced Kansei words luxury, informative, aesthetic appearance, durable, practical, attractive, and hygienic. The importance level of the items obtained 7 Kansei words for bottle packaging, 6 Kansei words for plastic packaging materials, 7 Kansei words for brown and black packaging colors, 6 Kansei words for 600 ml packaging size, 7 Kansei words for packaging information, 7 Kansei words for circle logo shape, 7 Kansei words for comic san MS writing type, 7 Kansei words for yellow and white packaging writing colors, and 6 Kansei words for boba images on packaging. Specifications for beverage packaging in the bottles form with plastic packaging materials, brown and black packaging colors, packaging sizes 600 ml, yellow and white writing colors, circle logo shape, product information, and boba picture.
Design of Work Facilities to Reduce Complaints of Musculoskeletal Disorders (MSDS) with an Ergonomic Approach to Coffee Farmers Nukhe Andri Silviana; Chalis Fajri Hasibuan; M. Fauza Rizkyansyah
International Journal of Health Engineering and Technology Vol. 1 No. 2 (2022): IJHE-JULY 2022
Publisher : CV. AFDIFAL MAJU BERKAH

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (501.684 KB) | DOI: 10.55227/ijhet.v1i2.17

Abstract

Complaints on the musculoskeletal system are complaints that are felt by a person in the muscles and skeleton with different levels of complaints, complaints to this damage are usually referred to as musculoskeletal disorders. The purpose of this study was to improve work facilities in the process of picking coffee cherries in Arul Item Village, Central Aceh. This measurement was carried out using the REBA (Rapid Entire Body Assessment) method and using the NBM (Nordic Body Map) questionnaire as the research instrument. The study was conducted using an analytical survey method which aims to see the relationship between work attitudes and musculoskeletal complaints with an ergonomic approach. From the results of the NBM questionnaire on 56 workers, it shows that the musculoskeletal complaints experienced by coffee berry pickers are in the category of pain, most of which are in the upper neck and left wrist as many as 39 (70%). In the very category of pain, the most pain was in the left shoulder 50 (89%) and the right wrist as much as 33 (59). Based on measurements using the REBA method, it is stated that there is an actual REBA score of 4-7 where the risk is at moderate risk for musculoskeletal disorders and on the proposed REBA score there is a score of 2 where the score is in a low risk area, so as to improve work attitudes and work posture which resulted in the emergence of musculoskeletal complaints, a modified work tool design, namely a bag, was proposed to reduce the high number of musculoskeletal complaints in coffee fruit pickers