Claim Missing Document
Check
Articles

Found 11 Documents
Search

Perancangan Dan Pembuatan Cetakan Ornamen Teralis Dari Aluminium Muhammad Arkan; Sailon; Syamsul Rizal
Jurnal Riset Multidisiplin Edukasi Vol. 2 No. 3 (2025): Jurnal Resit Multidisiplin Edukasi (Edisi Maret 2025)
Publisher : PT. Hasba Edukasi Mandiri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.71282/jurmie.v2i3.193

Abstract

The metal casting process is the process of pouring molten metal produced from melting into a mold at the melting temperature of the metal. Aluminum casting is generally done by the Sand Casting method, using a sand mold. Aluminum itself is a metal that is often used for various purposes, ranging from household appliances, construction, to automotive components and various other applications. This study focuses on the design and manufacture of aluminum trellis ornament molds, which are intended to improve production efficiency and the quality of the final product. The data processing method used in this study is the FEA (Finite Element Analysis) method. From the results of the analysis carried out through the FEA (Finite Element Analysis) analysis method that has been applied, it can be concluded that the stress distribution in the trellis ornament mold increases significantly with an increase in load from 50kg to 150kg. The results of the study also show that the mold is able to withstand loads of up to 150kg with tension and exceeding that which is within the safe limit. From the results of this study, it is recommended to make recommendations for improvements including the use of alternative materials with higher strength, redesigning the geometry of the mold to reduce stress concentration, and optimizing the process. Therefore, the results of this research are expected to be used in the future as a reference or literature to increase insight into the development of stronger and more efficient aluminum trellis ornament molds.
Pengembangan Alat Praktikum Fisika Gaya Gesek Pada Bidang Miring Berbasis Internet of Things Zulensi, Fisabilillah Caudilo; Anas, Adian Aristia; Wilza, Romi; Sundari, Ella; Rizal, Syamsul
MACHINERY Jurnal Teknologi Terapan Vol. 6 No. 1 (2025): Machinery: Jurnal Teknologi Terapan
Publisher : Politeknik Negeri Sriwijaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5281/zenodo.15234480

Abstract

Friction Force on An Inclined Plane (FFIP) is one of the important chpaters in physics courses. This study aims to develop and determine the performance of the lab physics lab based on the Internet of Things (IoT). This research method uses qualitative method and experimental approach. This physics lab is afterward compared to theoretical calculations from the FFIP formula by using tests at 3 inclined plane’s angles of 30o, 45o, and 60o, as well as at 2 distances of 40 cm and 70 cm. The data were analyzed using ANOVA of simple linear regression to obtain the level of accuracy and the relationship between the inclined plane’s angles and the distance towards the kinetic friction coefficient of the test objects. The results of the study shows that the development of the lab physics FFIP IoT-based has very decent performance as long as the error percentage (average) is 4.77% or less than 10% as well as the level of accuracy (average) is 95.23%. The results of the analysis showed that the inclined plane’s angles have a significant effect towards the kinetic friction coefficient of the test objects. On the other hand, the distance barely has no effect towards the kinetic friction coefficient.
ANALISIS QUALITY FUNCTION DEPLOYMENT (QFD) PADA RANCANG BANGUN MESIN MILLING 3 SUMBU Rizal, Syamsul; Rifki, Muhammad; Malik, Irawan; Zamheri, Ahmad
MACHINERY Jurnal Teknologi Terapan Vol. 4 No. 2 (2023): Machinery: Jurnal Teknologi Terapan
Publisher : Politeknik Negeri Sriwijaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5281/zenodo.8084960

Abstract

Machines are a special concern in the production process of several parties who use CNC machines, including industrial companies, educational institutions such as universities, polytechnics and vocational high schools. Machines used in industry and agencies with various brands, the price reaches hundreds of millions per unit and even billions of rupiah, other commercial CNC Mini Milling is still relatively expensive, and also has a heavy weight. The purpose of this study was to determine the customer's desire on the CNC Mini Milling machine, by conducting a questionnaire to increase customer satisfaction. Therefore, in this study, an analysis of customer satisfaction was carried out using the Quality Function Deployment (QFD) method in order to design a design according to the customer's wishes. The results of the study can be used as material to make improvements to material specifications, material capabilities and appropriate dimensions. The results of this study have found things that must be prioritized based on the House of Quality. Some of the priorities include having to repair the frame at a low price, light and strong, can increase ST 37, easy to use and dimensions that are not too big.
PENGARUH UKURAN BIJI JARAK PAGAR TERHADAP LAMANYA NYALA API DAN TEMPERATUR YANG DIHASILKAN PADA KOMPOR Mila, Andika Nopriansyah; Junaidi, Ahmad; Arnoldi, Dwi; Witjahjo, Soegeng; Hidayati, Baiti; Rizal, Syamsul; Medi, Ali
MACHINERY Jurnal Teknologi Terapan Vol. 4 No. 3 (2023): Machinery: Jurnal Teknologi Terapan
Publisher : Politeknik Negeri Sriwijaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.5281/zenodo.10122361

Abstract

The availability of fuels, especially fossil fuels, is increasingly scarce, concerns about meeting energy needs in the future are increasing. In urban areas, fuel gas (LPG) is generally used for daily cooking, while in rural areas, kerosene is more commonly used. This significant oil content opens up the possibility to use castor beans as fuel directly. Therefore, in this study the author conducted an experiment entitled "The Effect of Jatropha Bean Size on Fire Intensity and Temperature produced on the Stove". The variable used is jatropha beans weighing 350 grams in each form of castor bean roughness, namely: whole, peeled, coarse and fine. Where the results obtained from the research that has been carried out are whole castor beans with a flame for 93 minutes and a temperature of 314.7 °C, peeled to produce a flame for 85 minutes and a temperature of 433.3 °C, coarsely crushed to produce a flame for 73 minutes and a temperature of 498.8 °C, and finely crushed to produce a flame of 65 minutes and a temperature of 519 °C. So it can be concluded from the data produced, the larger the size of the castor bean, the more time the fire is and the finer the roughness of the castor bean fence, the higher the resulting temperature.
MEKANISASI PEMOTONGAN TEMPE UNTUK KERIPIK MENGGUNAKAN PISAU ROTASI Romli, Romli; Rizal, Syamsul; Widagdo, tri
AUSTENIT Vol. 3 No. 02 (2011): AUSTENIT: Oktober 2011
Publisher : Politeknik Negeri Sriwijaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1093.074 KB)

Abstract

Penelitian ini dilatarbelakangi oleh pentingnya peningkatan gizi masyarakat. Metode yang dikembangkan adalah kaji eksperimentalpada sebuah prototipe mesin pemotong tempe yang bekerja menggunakan pisau rotasi. Tujuan penelitian adalah mendapatkan data-data pengoperasian mesin, sedangkan manfaatnya adalah memberikan rekomendasi untuk pengoperasian mesin pada kondisi optimum. Variabel-variabel yang ditetapkan pada proses pemotongan tempe adalah jenis tempe bulat, putaran pisau potong n = 2850 rpm, sedang variabel bebasnya adalah tebal potongan (s) serta waktu pemotongan (t). Kondisi Optimum kinerja mesin untuk 4 variasi ketebalan adalah: - Ketebalan 0,2 mm, waktu pemotongan 3 detik dengan pemakaian daya listrik 94 Watt dengan kualitas pemotongan sedang. - Ketebalan 0,4 mm, waktu pemotongan 3 detik dengan pemakaian daya listrik 100 Watt dengan kualitas pemotongan sedang. - Ketebalan 0,6 mm, waktu pemotongan 2 detik dengan pemakaian daya listrik 114 Watt dengan kualitas pemotongan bagus. - Ketebalan 0,8 mm, waktu pemotongan 2,5 detik dengan pemakaian daya listrik 140 Watt dengan kualitas pemotongan sempurna.
PEMBUATAN SISTIM PREVENTIVE MAINTENANCE PADA BENGKEL PRODUKSI POLITEKNIK NEGERI SRIWIJAYA BERBASIS APLIKASI Junaidi, Ahmad; Gunawan, Indra; Taufikurrahman, Taufikurrahman; Rizal, Syamsul
AUSTENIT Vol. 11 No. 1 (2019): AUSTENIT: April 2019
Publisher : Politeknik Negeri Sriwijaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (444.964 KB)

Abstract

Mesin adalah tulang punggung proses produksi, oleh sebab itu kondisi mesin melalui maintenance harus dijaga supaya tetap dalam keadaan optimum. Peran teknologi informasi sangat diperlukan sebagai alat bantu menjaga kondisi optimum mesin-mesin yang ada, misalnya melalui software yang disebut Sistim Informasi Manajemen (SIM). Di dalam laporan akhira ini peneliti merencanakan pembuatan SIM yang didalam pengaplikasiaannya akan diterapkan di Bengkel Produksi Jurusan Teknik Mesin Politeknik Negeri Sriwijaya Palembang yang disebut dengan Sistim Informasi Preventive Maintenance (SIPM) dengan menggabungkan teori Preventive Maintenan (PM) dan sistem Database. Proses perancangan software menggunakan metode Systems Development Life Cycle (SDLC), yang meliputi: plan, analisa, desain, implementasi dan testing. Alat pengembang yang digunakan adalah Microsoft Access 2010 beserta bahasa pemrograman Visual Basic for Application (VBA).
Effect of Holding Time on Hardness and Microstructure of AISI 1045 Steel after Carburizing-Quenching Process Dodi Tafrant; Rachmat Dwi Sampurno; Syamsul Rizal; Dwiki Ramadhani; Ridho Dwi Nopransyah; Wan M. Alif Alhafidz
AJARCDE (Asian Journal of Applied Research for Community Development and Empowerment) Vol. 10 No. 2 (2026)
Publisher : Asia Pacific Network for Sustainable Agriculture, Food and Energy (SAFE-Network)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.29165/ajarcde.v10i2.1067

Abstract

This study investigates the effect of carburising holding time on the hardness and microstructure of AISI 1045 medium-carbon steel after quenching. The carburising process was conducted at 900°C using 100% coconut shell charcoal as the carburising medium, with holding times of 15, 30, 60, and 120 minutes. After carburising, the specimens were directly quenched in lubricating oil without reheating. Five specimens were prepared for each treatment condition, and hardness testing was performed according to ASTM E18 using the Rockwell B hardness scale (HRB). Five hardness measurements were conducted on each specimen to ensure repeatability. The results indicate that increasing holding time improved hardness and promoted martensitic transformation due to deeper carbon diffusion. The average hardness increased from 81.46 HRB for untreated specimens to 94.45 HRB for specimens carburized for 120 minutes. ANOVA analysis confirmed that holding time significantly affected hardness values, and regression analysis yielded an R² of 0.962. Microstructural observations revealed increasing martensite formation with longer holding times. The findings demonstrate that carburizing holding time plays an important role in improving the surface characteristics of AISI 1045 steel. Contribution to Sustainable Development Goals (SDGs):SDG 9: Industry, Innovation and InfrastructureSDG 12: Responsible Consumption and Production
Perbandingan Laju Korosi Baja Mild Steel yang Dilapisi Galvanis dan Cat pada Limbah Sawit Muhammad Aidil Fitra Izmail; Fatahul Arifin; Syamsul Rizal
Jurnal Teknologi Vol 26, No 1 (2026): April 2026
Publisher : Politeknik Negeri Lhokseumawe

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30811/teknologi.v26i1.8931

Abstract

This study aims to quantitatively compare the corrosion rate of mild steel coated with galvanizing, black spray paint, silver spray paint, and white spray paint when exposed to palm oil mill effluent. The experiment was conducted using the weight loss method in accordance with ASTM G31 standards. Mild steel specimens with dimensions of 150 mm × 25 mm × 2 mm were prepared, coated, and immersed in 4 L of conditioned palm oil wastewater for 22 days. Environmental parameters, including pH (4.5–5.2) and temperature (28–34°C), were continuously monitored throughout the testing period. Each test was performed in triplicate to ensure data reliability. The results indicate that coating type has a significant effect on corrosion resistance. Galvanized specimens exhibited the best performance, with a corrosion rate approaching 0 mm/year and a mass loss of ≤1%. In contrast, black spray-coated specimens showed the highest corrosion rate of 0.77 mm/year and mass loss exceeding 1.8%, followed by silver and white coatings, each with a corrosion rate of 0.26 mm/year. The superior performance of galvanizing is attributed to its sacrificial protection mechanism and the formation of stable passive layers such as ZnO and ZnCO₃, which effectively inhibit corrosion processes. In conclusion, galvanizing is the most effective coating method for protecting mild steel in aggressive environments such as palm oil mill effluent.
PENERAPAN INTERNET OF THINGS APLIKASI BLYNK PADA ALAT BANTU PRAKTIKUM FISIKA HUKUM HOOKE Safira Adelia Putri; Dwi Arnoldi; Adian Aristia Anas; Syamsul Rizal
Machine : Jurnal Teknik Mesin Vol 11 No 2 (2025): Machine : Jurnal Teknik Mesin
Publisher : Jurusan Teknik Mesin Fakultas Sains dan Teknik Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/4c02wm35

Abstract

Penelitian ini bertujuan untuk merancang dan mengembangkan alat bantu praktikum Fisika Hukum Hooke yang terintegrasi dengan teknologi Internet of Things (IoT) menggunakan platform Blynk. Alat ini dirancang untuk mengatasi permasalahan dalam kegiatan praktikum konvensional, seperti ketidakakuratan pengukuran manual, keterbatasan alat, dan kurangnya efisiensi dalam pemantauan data secara real time. Pengujian dilakukan dengan menggunakan tiga variasi massa 0,2 kg, 0,25 kg, dan 0,3 kg serta tiga diameter pegas 1 cm, 1,5 cm, dan 2 cm. Data diperoleh melalui dua metode, yaitu pengukuran manual dan pengukuran otomatis berbasis IoT. Hasil menunjukkan bahwa alat bantu praktikum berbasis IoT mampu menampilkan data secara akurat dan real time, serta memiliki tingkat ketelitian yang tinggi dengan rata-rata ketelitian mencapai di atas 95%. Analisis statistik dengan ANOVA menunjukkan bahwa variabel massa dan diameter pegas berpengaruh signifikan terhadap nilai konstanta pegas (p < 0,05). Dengan demikian, alat bantu praktikum berbasis IoT ini dinilai efektif dalam meningkatkan efisiensi, akurasi, dan kemudahan pemantauan praktikum Hukum Hooke, serta memberikan alternatif pembelajaran fisika yang interaktif bagi mahasiswa.
PENGARUH PUTARAN DAN WAKTU TERHADAP KETAHANAN AUS PADA ALUMINIUM Nabila Adisty Septrianti; Sailon; Mardiana; Syamsul Rizal
MACHINERY Jurnal Teknologi Terapan Vol. 6 No. 3 (2025): Machinery: Jurnal Teknologi Terapan
Publisher : Politeknik Negeri Sriwijaya, Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36257/machinery.v6i3.10427

Abstract

Penelitian ini bertujuan untuk mengkaji pengaruh variasi putaran dan waktu terhadap ketahanan aus pada aluminium. Aluminium merupakan salah satu material yang sering digunakan dalam berbagai industri karena sifatnya yang ringan dan tahan korosi. Namun, salah satu kelemahan aluminium adalah ketahanannya terhadap aus yang relatif rendah. Dalam penelitian ini, sampel aluminium diuji menggunakan mesin tribometer dengan variasi putaran 500, 700, dan 900 RPM sedangkan variasi waktu pengujian adalah 10,20 dan 30 menit. Dari pengujian tersebut didapatkan hasil putaran dengan nilai keausan aluminium paling tinggi didapatkan dengan RPM 900 dengan nilai keausan0,070 g dan nilai keausan yang paling rendah didapatkan dengn RPM 500 dengan nilai keausan 0,014 g. Dan hasil tingkat keausan dengan waktu aluminium yang paling rendah didapatkan dengan waktu 10 menit dengan nilai rata-rata keausan 0,02111 g dan nilai keausan yang paling tinggi didapatkan dengan waktu 30 menit dengan nilai rata- rata keausan 0,61333 g.