Claim Missing Document
Check
Articles

Found 24 Documents
Search

EVALUASI KEKERASAN RESTORASI NIKEL-KROMIUM DENGAN BERBAGAI METODE CASTING FX Ady Soesetijo
STOMATOGNATIC - Jurnal Kedokteran Gigi Vol 9 No 3 (2012)
Publisher : Fakultas Kedokteran Gigi Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Non precious alloys were used widely in dentistry, because cost was relatively lower than noble alloys (precious alloy). This study aims to evaluate the microhardness NiCr alloys were frequently used in the construction of crown and bridges prosthodontics and metal frame dentures with different methods. Casting methods used were: 1) induction / argon, the argon electromagnetic induction with controlled atmospheric pressure, 2) induction / vacuum, the electromagnetic induction in a vacuum environment, 3) induction /air, electromagnetic induction air was not controlled by atmospheric pressure and 4) flame / air from combustion of gas / oxygen in centrifugal castings machine was not controlled by atmospheric pressure. The three of alloys used were Ni-Cr-Mo-Ti: Ni-Cr-Mo-Be and Ni-Cr-Mo-Nb. The sample size was 60, divided into 12 groups (each group consisted of 5 samples). Cylindrical samples with a length of 15 mm and a diameter of 1.6 mm. After casting, the samples were embedded in resin and polished for Vickers microhardness measurement in a Shimadzu HMV-2 (1000 g with duration of 10 seconds). The data obtained were in the form of indentations (indentation) on the surface of the sample. The data was subjected to two-way ANOVA and Tukey's multiple comparison test ( = 0.05). The two way ANOVA suggested a non significant effect of the interaction alloys versus casting (p=0.10). A significant effect of alloy (p<0.0001)and casting methods (p<0,0001) was detected. The hardness value of Ni-Cr-Mo-Ti (421 ± 7.8) was higher (p <0.05) than the Ni-Cr-Mo-Nb (414 ± 7.6). The hardness value of the casting method of induction / argon and induction/ vacuum was similar (p> 0.05), and lower than the induction / air and flame / air (p <0.05). The lowest hardness value was Ni-Cr-Mo-Be (358 ± 10.7). The hardness value in the condition induction/ air and flame /air was similar (p> 0.05). The microhardness of the alloys was influenced by their composition and casting method. The microhardness of NiCr alloy hardness was higher when they were cast with induction/air and flame/air methods
Konsumsi Garam sebagai Faktor Determinan Grade Hipertensi pada Penderita Hipertensi Primer di Wilayah Pesisir FX. Ady Soesetijo; Krish Naufal Anugrah Robby; Ancah Caesarina Novi Marchianti
Multidisciplinary Journal Vol 1 No 1 (2018): Agustus 2018
Publisher : Pascasarjana Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (509.867 KB) | DOI: 10.19184/multijournal.v1i1.8590

Abstract

Patients with essential hypertension in the coastal area is very vulnerable to having complications due to high consumption of salt habits. The purpose of this research was to know the effect consumption of salt on grade hypertension in essential hypertension patients in coastal area. This research was kuntitatif with observational analyzed method with cross sectional design. Sample of this research were 100 patient in kedungrejo public health center who taken by consecutive sampling. Partial Least Square (PLS) with smart PLS 3 Aplication software was used as to analyze data. Based on the test result there was positive influence of consumsion salt on grade hipertensi, T statistic was 75,234 (t statistic > t table significant 1.96) it meant Consumption of salt has positive effect on grade hypertension, high consumption of salt will be high grade hypertension. So it can be concluded that it is necessary to modify the behavior consumption of salt to reduce grade hypertension in essential hypertension patients of coastal community.Keywords: Consumption of salt, essential hypertension, grade hypertensi
Pengaruh Tingkat Pengetahuan dan Stres Kerja terhadap Pencegahan Kecelakaan Kerja pada Pekerja Giling dan Ketel di PG Rejo Agung Baru Madiun Caesar Kridha Bagus Prahartiko; FX Ady Soesetijo; Ristya Widi Endah Yani
Multidisciplinary Journal Vol 2 No 1 (2019): Juli 2019
Publisher : Pascasarjana Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (987.041 KB) | DOI: 10.19184/multijournal.v2i1.20111

Abstract

workers in sugar mills are prone to accident in their workplace. This research aims at disclosing the effect of knowledge level and work stress on prevention of work accident in Milled and Kettle Workers. It is a qualitative research employing analytic observation method using cross sectional design. The sample, including 115 workers in Milling and Kettle Section in PG Rejo Agung Baru Madiun, were selected by using total sampling. Regression Test by SPSS 22 was applied to analyze the data. Findings demonstrate the sig value of knowledge level indicating 0.889 and sig value of stress level of 0.027. It reveals that there is no effect from workers’ knowledge level, in contrast, work stress affect the prevention of work place accident. Therefore, more stimulation on knowledge level and support for workers are prominent to minimize their work stress.Keywords: Knowledge level, sugar mill, work accident, work stress
Identifikasi Kontaminasi Aflatoksin pada Rempah-Rempah yang Dijual di Sentra Pasar di Kabupaten Jember Rina Fitriana; FX. Ady Soesetijo; Erma Sulistyaningsih
Multidisciplinary Journal Vol 2 No 1 (2019): Juli 2019
Publisher : Pascasarjana Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1075.851 KB) | DOI: 10.19184/multijournal.v2i1.20112

Abstract

Aflatoxin is a secondary metabolite of the fungus Aspergillus flavus and Aspergillus parasiticus, the toxin is able to cause health problems in humans and animals that suffer sympthom of aflatoxin called mycotoxicosis. Both types of fungus can survive at optimally temperature of 36-38oC and moisture above 85%. Aspergillus species may contaminated some foods such as wheat, rice, corn, beans, chilies, and spices. Aflatoxin have six types, namely Aflatoxin B1, B2, G1, G2, M1 and M2. AFB1 is the most toxic among the six types of aflatoxin, it’s induce cancer by affecting Deoxyribonucleic Acid (DNA) genetic code. The aim of this research was to analyze the types and levels of aflatoxin especially spices that provided in the traditional market and supermarkets in Jember area. This research design is experimental analytic. The population is spices that belong in all of traditional markets and supermarkets in Jember area. The sample is certain spices (onion, turmeric, pepper) in the 3 traditional markets and 3 supermarkets selected by purposive sampling techniques. This research was done at Central Laboratory Agro Industry Bogor on July – September 2019. The variable of this research is aflatoxin contamination inside of spices. Aflatoxin analytic performed by High Performance Liquid Chromatography (HPLC) instruments. The results of this research showed that found some of samples that has been analyzed, the samples of pepper (C4) was taken in Supermarket ‘X’ has the highest contaminated aflatoxin B1 was 45,35 ppb and aflatoxin G1 was 50,74 ppb. Therefore, its recommended for Supermarket is to increased monitoring of temperature and humidity, especially at the storage of spices.Keyword: Aflatoxin, Fungus, Traditional Market, Spices, Supermarket
Pengaruh Usia Dan Pendidikan Terhadap Implementasi nisiasi Menyusu Dini (IMD) Pada Pasien Post Sectio Caesarea Meylina Parela Ningsih; FX. Ady Soesetijo; Dewi Rokhmah
Multidisciplinary Journal Vol 4 No 1 (2021): Juli 2021
Publisher : Pascasarjana Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1027.07 KB) | DOI: 10.19184/multijournal.v4i1.27468

Abstract

Early initiation of breastfeeding (EIBF) in post sectio caesarea patients is the process of breastfeeding the baby to his mother immediately after birth by placing the baby on the mother's chest or abdomen so that skin-to-skin contact occurs and letting the baby find the mother's nipple and then breastfeed until satisfied. The benefits of IMD are very large for mothers and babies including accelerating the production of colostrum as a baby antibody so as to prevent infection, prevent hypothermia and hypoglycemia and prevent anemia due to bleeding after delivery. IMD becomes important to be carried out both for mothers with normal labor and with the act of sectio caesarea. This study aims to determine the effect of maternal age and education on the implementation of early initiation of breastfeeding (IMD) in post sectio caesarea patients. This type of research was analytic observational with cross sectional design. Data obtained from primary data 99 respondents by filling out a questionnaire and direct observation. The research site at Bina Sehat Jember Hospital in April 2021. Data obtained from the primary data of 99 respondents by filling out questionnaires and making direct observations. Data analysis used is bivariate analysis using SPSS statistical data processing tool. The results of the instrument test show that all variables were valid and reliable as a data collection tool. The results of data analysis showed that: 1) Age had no significant effect on the implementation of IMD in post sectio caesarea patients (p = 0.769) because the indication for delivery by sectio caesarea was not carried out in patients with high risk age, but also in productive age. 2) Education had no significant effect on the implementation of IMD in post sectio caesarea patients (p = 0.284) Because knowledge about the importance of early breastfeeding initiation and how to do it is not obtained during formal education but from non-formal education and other educational media, so that other educational media are needed in order to support the implementation of IMD, especially in post sectio cesarea patients. Keywords: Early Initiation Breastfeeding, Education, Sectio Caesarea, Age
Manajemen Laktasi Ibu Rumah Tangga Pada Pemberian ASI Eksklusif Di Wilayah Kerja Puskesmas Sumbersari Kabupaten Jember Febriana Widyasari Dewi; FX. Ady Soesetijo; Farida Wahyu Ningtyias
Multidisciplinary Journal Vol 3 No 2 (2020): Desember 2020
Publisher : Pascasarjana Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (810.316 KB) | DOI: 10.19184/multijournal.v3i2.24040

Abstract

The development of infant is affected by several factors, particularly providing exclusive breast feeding by the maternal, in which the exclusive breastfeeding contains complete nutrients that is needed by infant. However, the low rate of providing exclusive breast feeding in community may remain a challenge. A good lactation management takes important role in successful rate of exclusive breastfeeding. The lactation management can be defined as a either management or procedure performed by mothers during pregnancy, childbirth, and breastfeeding phase in order to facilitate breastfeeding activity. The lactation management itself is expected to support providing exclusive breastfeeding at least six months, in which the lactation management is necessary for both career-mother and housewife. The objective of this study was to assess the lactation management among housewife during breastfeeding activity. This was descriptive study by using quantitative approach, where the study design is case control. The location of this study is in work area of Primary Health Care of Sumbersari, Jember. This study found that lactation management is essential factor that affects breastfeeding activity among housewife. Keyword: Exclusive Breast Feeding, Lactation Management, Housewife
Pengaruh Dukungan Kader dalam Imunisasi Dasar Lengkap di wilayah kerja Puskesmas Jelbuk dan Klatakan, Kabupaten Jember Widya Rizki Septianingtyas; FX. Ady Soesetijo; Ristya Widi E. Y
Multidisciplinary Journal Vol 1 No 1 (2018): Agustus 2018
Publisher : Pascasarjana Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (473.265 KB) | DOI: 10.19184/multijournal.v1i1.8593

Abstract

Immunization is an attempt to actively generate or enhance a person's immunity to a disease, so that when exposed to the disease will not experience pain or only mild illness. Immunization program for baby aims to make every baby get immunization basic complete. The successfull of baby in obtaining basic immunization can be measured by complete basic immunization indicator (IDL). Basic immunization status on the children can be influenced by several factors associated with people behavior. Cadre's support is one of the important factors in immunization activities so that Posyandu activities can work as on schedule. Jelbuk and Klatakan public health center have complete basic immunization coverage lowest in Jember district in 2015 and 2016 years. The aim of this research was to analyze the influence of cadre’s support in the complete basic immunization. This research used analytic observational with cross Sectional analysis design. The location of this research was in the working area Jelbuk and Klatakan public health center on August – September 2017. The data was collected from 100 mothers who has children aged 12-23 months. Sampling method was using cluster random sampling. The results of this research by the logistic regression test showed that cadre support has an influence on complete basic immunization with p-value= 0,013. Therefore, its recommended for cadres to improve public education about complete basic immunization so that complete basic immunization coverage may increase. Keywords : Cadre’s Support, Complete Basic Immunization
Pertimbangan laboratoris arah pemasangan rotasi gigitiruan sebagian lepasan rangka logam Laboratory considerations in rotational path of insertion of metal frame removable partial denture FX Ady Soesetijo
Journal of Dentomaxillofacial Science Vol. 10 No. 2 (2011): Formerly Jurnal Dentofasial ISSN 1412-8926
Publisher : DiscoverSys Inc.

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15562/jdmfs.v10i2.268

Abstract

Clinical indications and contraindications for insertion path of removable partial denture (RPD)have been welldiscussed in the literature. However, specific discussion of proper laboratory technique and procedure for dentaltechnician is scarce and limited. This article describes two problems that dental technicians occasionally encounterwhich make the fabrication of rotational insertion path of RPD difficult or impossible. Design modifications by theclinician can eliminate problems faced by technicians in determining the proper path of insertion. Lack of clinicalexperience and/or guidance from the literature related to the insertion path of RPD design may cause laboratoryand clinical problems. The recognition of these potential problems will minimize the laboratory and clinicalproblems
The Aflatoxin Contamination in Spices Sold on the Jember Market Rina Fitriana; FX. Ady Soesetijo; Erma Sulistyaningsih
Aloha International Journal of Health Advancement (AIJHA) Vol 2, No 12 (2019): December
Publisher : Alliance oh Health Activists (AloHA)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33846/aijha21203

Abstract

Aflatoxin is a secondary metabolite of the fungus Aspergillus flavus and Aspergillus parasiticus, the toxin is able to cause health problems in humans and animals that suffer sympthom of aflatoxin called mycotoxicosis. Both types of fungus can survive at optimally temperature of 36-38oC and moisture above 85%. Aspergillus species may contaminated some foods such as wheat, rice, corn, beans, chilies, and spices. Aflatoxin have six types, namely Aflatoxin B1, B2, G1, G2, M1 and M2. AFB1 is the most toxic among the six types of aflatoxin, it’s induce cancer by affecting Deoxyribonucleic Acid (DNA) genetic code. The aim of this research was to analyze the types and levels of aflatoxin especially spices that provided in the traditional market and supermarkets in Jember area. This research applied with experimental analytic. The population was spices that belong in all of traditional markets and supermarkets in Jember area. The sample was certain spices (onion, turmeric, pepper) in the 3 traditional markets and 3 supermarkets selected by purposive sampling techniques. This research was done at Central Laboratory Agro Industry Bogor on July to September 2019. The variable of this research was aflatoxin contamination inside of spices. Aflatoxin analytic performed by High Performance Liquid Chromatography (HPLC) instruments. The results of this research showed that found some of samples that has been analyzed, the samples of pepper (C4) was taken in Supermarket ‘X’ has the highest contaminated aflatoxin B1 was 45,35 ppb and aflatoxin G1 was 50,74 ppb. Therefore, its recommended for Supermarket is to increased monitoring of temperature and humidity, especially at the storage of spices. Keyword: aflatoxin; fungus; traditional market; spices; supermarket
PERBANDINGAN UJI KEBOCORAN TEPI RESIN KOMPOSIT FLOWABLE DAN BAHAN LUTING SEMEN PADA PASAK POLYETHYLENE FIBER-REINFORCED (PFR) Malun Nasrudin; Dwi Warna Aju Fatmawati; FX Ady Soesetijo
Odonto : Dental Journal Vol 3, No 1 (2016): July 2016
Publisher : Faculty of Dentistry, Universitas Islam Sultan Agung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (199.637 KB) | DOI: 10.30659/odj.3.1.27-33

Abstract

Background: Zinc phosphate, glass-ionomer, and resin cement are the most commonly used as luting cements. Flowable composite resin could reduce restoration microleakage and provided better marginal seal in dentin. Purpose: The objective of the study was to compare microleakage between flowable composite resin and cement luting materials.Methods: The study was experimental laboratory by the post test only without control group design. The sample size was 18, which was divided into 3 groups. Each group consisted of 6 samples. Glass-ionomer cement and zinc phosphate were luting cement materials that used in the study. Microleakage measurement method used stereomicroscope after the samples were stored in methylen blue 0.25%.Results: The smallest average value of microleakage was in the flowable composite resin group (29,16%). One way ANOVA test results showed that there were significant differences between treatment groups (p=0.000). Conclusion: It was concluded that flowable composite resin have smaller microleakage average value than glass-ionomer cement and zinc phosphate.