Garuda - Garba Rujukan Digital

Kinetic Study of Styrene Oxidation over Titania Catalyst Supported on Sulfonated Fish Bone-derived Carbon Ratna Kusumawardani; Mukhamad Nurhadi; Teguh Wirawan; Anton Prasetyo; Nabila Nur Agusti; Sin Yuan Lai; Hadi Nur
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022)
Publisher : Department of Chemical Engineering - Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.1.13133.194-204

The kinetic evaluation of titania supported sulfonated fish bone-derived carbon (TiO2/SFBC) as a catalyst in styrene oxidation by aqueous hydrogen peroxide was carried out. The catalysts were prepared by carbonation of fishbone powder at varying temperatures 500, 600 and 700 °C, respectively for 2 h, followed by sulfonation with sulfuric acid (1M) for 24 h and impregnated by varied titania concentration 500, 1000 and 1500 µmol. The physical properties of catalysts were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX) and the nitrogen adsorption-desorption analysis. The catalytic activity result showed that TiO2/SFBC can be used as a potential catalyst in styrene oxidation. Worth noting that the sulfonation process has not only transformed the TiO2/FBC particulates (without sulfonation) to cuboid-shaped TiO2/SFBC (with sulfonation) but also contributed to the high selectivity of benzaldehyde. On the other hand, carbonization at different temperatures has an indistinct effect on catalytic performance due to their similar surface areas. The styrene conversion rate responded positively with the increasing amount of titania in the functionalized composites. The styrene oxidation by aqueous H2O2 unraveled the first-order reaction with the activation energy of ⁓63.5 kJ. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Comparative Adsorption Performance of Carbon-containing Hydroxyapatite Derived Tenggiri (Scomberomorini) and Belida (Chitala) Fish Bone for Methylene Blue Sri Lestari; Mukhamad Nurhadi; Ratna Kusuma Wardani; Eko Saputro; Retno Pujisupiati; Nova Sukmawati Muskita; Nezalsa Fortuna; A’an Suri Purwandari; Fahria Aryani; Sin Yuan Lai; Hadi Nur
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 3 Year 2022 (September 2022)
Publisher : Department of Chemical Engineering - Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.3.15303.565-576

The utilization of fishbone as the carbon source for methylene blue adsorption has been successfully studied. Fishbone was prepared from two kinds of fish such as marine fisheries (ex. Tenggiri) and freshwater fisheries (ex. Belida). The carbons were prepared by carbonation of fishbone powder at 500 °C for 2 h. Physical properties of carbons were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), wavelength dispersive X-ray fluorescence (WDXRF), Scanning Electron Microscope (SEM), and hydrophobicity. The carbons were utilized as the adsorbent for removing methylene blue by varying the contact time, initial dye concentration, and temperature. It is concluded that both carbons can very good adsorb the methylene blue. The adsorption performance of carbon (TFC) from Tenggiri fish is better than carbon (BFC) from Belida fish. The adsorption was well fitted with the Langmuir adsorption model (R2 ~ 0.998) and the pseudo-second-order model. This indicated that the dye molecules were adsorbed on the surface-active site of carbon via chemical binding, forming an adsorbate monolayer. Thermodynamic parameters, including the Gibbs free energy (ΔG), enthalpy (ΔH), and entropy (ΔS), indicated that the adsorption of methylene blue onto the carbon from fishbone was spontaneous. Thus, carbon from fishbone can be applied as a low-cost adsorbent to treat industrial effluents contaminated with methylene blue. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Kinetic Study of Styrene Oxidation over Titania Catalyst Supported on Sulfonated Fish Bone-derived Carbon Ratna Kusumawardani; Mukhamad Nurhadi; Teguh Wirawan; Anton Prasetyo; Nabila Nur Agusti; Sin Yuan Lai; Hadi Nur
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.1.13133.194-204

The kinetic evaluation of titania supported sulfonated fish bone-derived carbon (TiO2/SFBC) as a catalyst in styrene oxidation by aqueous hydrogen peroxide was carried out. The catalysts were prepared by carbonation of fishbone powder at varying temperatures 500, 600 and 700 °C, respectively for 2 h, followed by sulfonation with sulfuric acid (1M) for 24 h and impregnated by varied titania concentration 500, 1000 and 1500 µmol. The physical properties of catalysts were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX) and the nitrogen adsorption-desorption analysis. The catalytic activity result showed that TiO2/SFBC can be used as a potential catalyst in styrene oxidation. Worth noting that the sulfonation process has not only transformed the TiO2/FBC particulates (without sulfonation) to cuboid-shaped TiO2/SFBC (with sulfonation) but also contributed to the high selectivity of benzaldehyde. On the other hand, carbonization at different temperatures has an indistinct effect on catalytic performance due to their similar surface areas. The styrene conversion rate responded positively with the increasing amount of titania in the functionalized composites. The styrene oxidation by aqueous H2O2 unraveled the first-order reaction with the activation energy of ⁓63.5 kJ. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

One Pot Synthesis of Calcium Sulfate Hemihydrate from Fishbone-derived Carbon Teguh Wirawan; Mukhamad Nurhadi; Agung Rahmadani; Yuniar Ponco Prananto; Zhiying Zhu; Sin Yuan Lai; Hadi Nur
Bulletin of Chemical Reaction Engineering & Catalysis 2023: BCREC Volume 18 Issue 3 Year 2023 (October 2023)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.19515

Calcium Sulfate Hemihydrate (CSH) with uniform morphology and high crystallinity were successfully prepared by a precipitation-hydrolysis method in a concentrated sulfuric acid solution containing fishbone-derived carbon. The CSH was produced by carbonization of fishbone powder at 500 °C for 2 h, followed by sulfonation with concentrated sulfuric acid for 3 h. The solid mixture was washed until the pH of 2, then left at room temperature for 3 days. Physical properties of synthesized CSH were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), wavelength dispersive X-ray fluorescence (WDXRF), Scanning Electron Microscope (SEM), nitrogen adsorption-desorption isotherm, and melting point test. It is concluded that the CSH were formed due to hydrolysis of fishbone-derived carbon in a moderately concentrated sulfuric acid solution of carbon-derived fishbone and crystallization into a fibrous octa calcium phosphate (OCP) form. In this research, effect of crystal growth time, effect of pH during the crystal growth, and effect of volume of the solution were also investigated. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Comparative Adsorption Performance of Carbon-containing Hydroxyapatite Derived Tenggiri (Scomberomorini) and Belida (Chitala) Fish Bone for Methylene Blue Sri Lestari; Mukhamad Nurhadi; Ratna Kusuma Wardani; Eko Saputro; Retno Pujisupiati; Nova Sukmawati Muskita; Nezalsa Fortuna; A’an Suri Purwandari; Fahria Aryani; Sin Yuan Lai; Hadi Nur
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 3 Year 2022 (September 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.3.15303.565-576

The utilization of fishbone as the carbon source for methylene blue adsorption has been successfully studied. Fishbone was prepared from two kinds of fish such as marine fisheries (ex. Tenggiri) and freshwater fisheries (ex. Belida). The carbons were prepared by carbonation of fishbone powder at 500 °C for 2 h. Physical properties of carbons were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), wavelength dispersive X-ray fluorescence (WDXRF), Scanning Electron Microscope (SEM), and hydrophobicity. The carbons were utilized as the adsorbent for removing methylene blue by varying the contact time, initial dye concentration, and temperature. It is concluded that both carbons can very good adsorb the methylene blue. The adsorption performance of carbon (TFC) from Tenggiri fish is better than carbon (BFC) from Belida fish. The adsorption was well fitted with the Langmuir adsorption model (R2 ~ 0.998) and the pseudo-second-order model. This indicated that the dye molecules were adsorbed on the surface-active site of carbon via chemical binding, forming an adsorbate monolayer. Thermodynamic parameters, including the Gibbs free energy (ΔG), enthalpy (ΔH), and entropy (ΔS), indicated that the adsorption of methylene blue onto the carbon from fishbone was spontaneous. Thus, carbon from fishbone can be applied as a low-cost adsorbent to treat industrial effluents contaminated with methylene blue. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Synergistic Ti-Fe Oxides on Fishbone-Derived Carbon Sulfonate: Enhanced Styrene Oxidation Catalysis Mukhamad Nurhadi; Ratna Kusumawardani; Teguh Wirawan; Sin Yuan Lai; Hadi Nur
Indonesian Journal of Chemistry Vol 23, No 6 (2023)
Publisher : Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/ijc.80667

Fishbone-derived carbon sulfonate, modified through incipient wetness impregnation with titanium tetraisopropoxide and iron nitrate salts, displays catalytic activity in the oxidation of styrene with hydrogen peroxide (H2O2) as an oxidant. This was done to develop a cost-effective, non-toxic, and environmentally friendly bimetallic oxide catalyst, incorporating titanium and iron oxides on mesoporous-derived carbon fishbone to enhance styrene conversion and benzaldehyde selectivity in styrene oxidation using aqueous H2O2. The catalyst, featuring a combination of titanium and iron oxides on the surface of the fishbone-derived carbon sulfonate, demonstrates higher catalytic activity than single oxide catalysts, such as titanium or iron oxides alone. Factors influencing the catalyst's performance are investigated by using FTIR, XRD, XRF, SEM, and BET surface area. The results reveal that the presence of both titanium and iron oxides on the surface of the fishbone-derived carbon sulfonate and the catalyst's surface area creates a synergistic effect, the primary factors affecting its catalytic activity in styrene oxidation using H2O2 as an oxidant.

Title

Found 6 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 6 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 6 Documents
Search