Claim Missing Document
Check
Articles

Studi Pola Operasi Pintu Berdasarkan Routing Kapasitas Pengaliran Intake Menara Pada Bendungan Semantok Kabupaten Nganjuk Rahmadani, Siska; Sayekti, Rini Wahyu; Sisinggih, Dian
Jurnal Teknologi dan Rekayasa Sumber Daya Air Vol. 1 No. 1 (2021): Jurnal Teknologi dan Rekayasa Sumber Daya Air (JTRESDA)
Publisher : Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/ub.jtresda.2021.001.01.12

Abstract

Semantok Dam was build to supply water for irrigation with total area of the irrigated is 1825 ha including six weirs with a minimum requirement of 3,943 m3/s. To distribute the water for irrigated, so in this study need to use the operating pattern based on the intake routing capacity in main DAM with the intake tower.   The operating pattern of the intake door opening needs to be appropriate to prevent problems in water distribution with one-valve and two-valves. The total height loss that happens along intake tower is 6,135 m, here in after used for routing.  In operation pattern routing method in one year using one-valve it’s fulfill the discharge 83,33% and with two-valve discharge operation pattern fullfilled 16,67%. Furthermore in the escape channel there’s flow affected by the valve, it’s sub critical flow and also stilling basin ogee IV. Bendungan Semantok dibangun untuk menyuplai kebutuhan air irigasi  seluas 1825 ha meliputi enam bendung (Bendung Rejoso, Bendung Margomulyo, Bendung Ngomben, Bendung Jatirejo, Bendung Janeng, dan Bendung Jati) dengan debit suplai sebesar 3,943 m3/dt. Guna menyuplai kebutuhan air irigasi, maka dalam studi ini merencanakan pola operasi pintu berdasarkan routing kapasitas intake di bendungan dengan bangunan intake Menara. Pola operasi bukaan pintu intake perlu disesuaikan guna mencegah masalah pendistribusian air dengan bukaan katup yang digunakan 1 (satu) katup dan 2 (dua) katup. Kehilangan tinggi yang terjadi sepanjang  intake Menara sebesar 6,135 m yang selanjutnya digunakan untuk melakukan routing. Pada pola operasi metode routing dalam satu tahun menggunakan  1 (satu) katup memenuhi debit suplai sebesar 83,333% dan pola operasi 2 (dua) katup memenuhi debit suplai 16,667%. Selanjutnya saluran pengarah akhir terdapat aliran yang mempengaruhi setelah pintu katup yaitu aliran sub kritis serta tipe peredam energi ogee IV.
Studi Simulasi Pola Operasi Bukaan Pintu Bendung Gerak Mrican (Waru Turi) Kecamatan Gampangrejo Kabupaten Kediri Jawa Timur Ramadian, Favian Giffary; Sayekti, Rini Wahyu; Sisinggih, Dian
Jurnal Teknologi dan Rekayasa Sumber Daya Air Vol. 1 No. 1 (2021): Jurnal Teknologi dan Rekayasa Sumber Daya Air (JTRESDA)
Publisher : Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/ub.jtresda.2021.001.01.19

Abstract

The Mrican Weir (Waru Turi) is one of the largest motion weirs that dam the Brantas River. The weir irrigates the Waru irrigation area of 12,710 hectares and the Turi irrigation area of 16,444 hectares. The main function of the weir is to needs of irrigation water (flow control) and flood control structures. From a total of nine spillway gates, only eight gates are operating optimally. With the need for irrigation water that must be fulfilled, a new operating pattern is needed to continue to support this irrigation. The door opening operation pattern refers to the Normal Water Level at an elevation of +57.3 meters as the ideal reference. The water level receded at an elevation of +57.2 meters, and the Flood Water Level at an elevation of +58.28 meters. The simulation method for door opening (intake and spillway door) is based on irrigation requirements. With the gate opening simulation method, the maximum discharge of the spillway door (+57.3 m) is 63.67 m3/s, with an opening of 2.73 meters per door (a total of eight functioning gates). While at the Waru intake the discharge is 6.211 m3/s and Turi with a discharge of 7.936 m3/s, the maximum gate opening is 0.3 meters per door. With the new operating pattern, the discharge that flows at each intake gate still meets the needs of irrigation discharge.
Studi Optimasi Air Irigasi Bendungan Semantok Untuk Memaksimalkan Luas Layanan Irigasi Di Kabupaten Nganjuk Larasati, Putri Dita; Sayekti, Rini Wahyu; Soetopo, Widandi
Jurnal Teknologi dan Rekayasa Sumber Daya Air Vol. 1 No. 1 (2021): Jurnal Teknologi dan Rekayasa Sumber Daya Air (JTRESDA)
Publisher : Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/ub.jtresda.2021.001.01.29

Abstract

Nganjuk district is quite dry with low rainfall distribution however people still rely on rainfed irrigation including 6 irrigation areas which are Weir Rejoso, Margomulyo, Ngomben, Jati, Jatirejo, and Janeng. This problem makes the total cropping intensity for three times planting period of every irrigation area didn’t reach 300%. To anticipate this problem, Semantok Dam was built to provide the discharge of irrigation water needs in the amount of 3.23 m3/s for all irrigation areas available in each weir. This study performed optimization with the linear program using solver in Microsoft Excel. The objective function of this model was to optimize the supply provided by the dam and to optimize the potential land area available in the weir irrigation area by the discharge supply and available land area as constraints. In this optimization model, three cropping patterns were planned with a variety of initial planting times for each weir. Based on the optimization result, the selected cropping pattern is the 2nd cropping pattern alternative that starts planting on the 3rd period of December with a total cropping intensity is 300%. Kabupaten nganjuk merupakan daerah kering dengan sistem irigasi teknis namun masih mengandalkan irigasi tadah hujan dimana meliputi 6 daerah irigasi bendung yaitu Bendung Rejoso, Margomulyo, Ngomben, Jati, Jatirejo dan Janeng. Sehingga intensitas tanam total untuk tiga kali masa tanam pada setiap daerah irigasi bendung tidak mencapai 300%. Demi mengantisipasi hal ini maka dibangun Bendungan Semantok guna menyuplai debit kebutuhan irigasi sebesar 3,23 m3/dt untuk keenam daerah irigasi bendung tersebut. Dalam studi ini dilakukan optimasi dengan program linier menggunakan fasilitas solver pada Microsoft Excel. Fungsi tujuan pada model optimasi ini adalah mengoptimalkan debit suplai pada bendungan dan luas potensial yang ada pada 6 daerah irigasi bendung dengan fungsi kendala yaitu debit suplai bendungan dan luas lahan tersedia. Pada model optimasi ini direncanakan tiga alternatif pola tata tanam dengan perbedaan awal tanam untuk masing-masing bendung. Berdasarkan hasil optimasi maka didapat pola tata tanam terpilih adalah alternatif pola tata tanam ke-II dengan awal tanam Bulan Desember periode III dengan intensitas tanam total 300%.
Kesesuaian Lahan Potensial untuk Memanfaatkan Sisa Suplesi Bendungan Semantok di Kabupaten Nganjuk Provinsi Jawa Timur Santosa, Rizky Ramadhani Anwar; Sayekti, Rini Wahyu; Siswoyo, Hari
Jurnal Teknologi dan Rekayasa Sumber Daya Air Vol. 2 No. 2 (2022): Jurnal Teknologi dan Rekayasa Sumber Daya Air (JTRESDA)
Publisher : Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/ub.jtresda.2022.002.02.03

Abstract

The Semantok Dam was constructed in the Rejoso District of East Java's Nganjuk Regency to keep  stable the water supply in Nganjuk Regency. There is frequently an 1,3 m3/s excess of supplementary water as determined by previous study. The objective of this study is to recalculate the excess of supplementary water based on the most recent hydrological conditions, using the calculation method for intake discharge at the Semantok Dam tower, calculating water irrigation needs, and calculating water loss in the canal, so that the value of excess of supplementary water can be used to develop the potential agricultural land. This research was conducted in the downstream of the Semantok Dam, precisely in 6 (six) Daerah Irigasi (D.I), namely D.I Rejoso, D.I Margomulyo, D.I Jatirejo, D.I Jati, D.I Janeng, and D.I Ngomben to calculate irrigation water needs. According to this study, if the Semantok Dam supplementation of 3.23 m3/s is combined with the predicted residual flow rate of 0.70 m3/s, a potential land area of 813 ha can be cultivated using the Paddy – Paddy – Paddy cropping pattern with a production profit of Rp. 42.119.578.800.Bendungan Semantok dibangun di Kecamatan Rejoso Kabupaten Nganjuk Jawa Timur untuk menjaga kestabilan pasokan air di Kabupaten Nganjuk. Permasalahan di lokasi penelitian sering terjadi kelebihan air pelengkap sebesar 1,3 m3/detik seperti yang ditentukan oleh penelitian sebelumnya. Tujuan dari penelitian ini adalah untuk menghitung ulang kelebihan air tampungan berdasarkan kondisi hidrologis terkini, menggunakan metode perhitungan debit intake di menara Bendungan Semantok, menghitung kebutuhan air irigasi, dan menghitung kehilangan air di sungai, sehingga nilainya kelebihan air tambahan dapat digunakan untuk mengembangkan potensi lahan pertanian. Penelitian ini dilakukan di bagian hilir Bendungan Semantok tepatnya di 6 (enam) Daerah Irigasi (D.I) yaitu D.I Rejoso, D.I Margomulyo, D.I Jatirejo, D.I Jati, D.I Janeng, dan D.I Ngomben untuk menghitung kebutuhan air irigasi. Dari penelitian ini diketahui bahwa kelebihan air dengan penambahan Bendungan Semantok sebesar 3,23 m3/detik dan debit sisa yang dihitung sebesar 0,70 m3/detik, direncanakan dapat mengembangkan potensi lahan seluas 813 ha dan mendapatkan keuntungan produksi sebesar Rp. 42.119.578.800 jika melakukan pola tanam Padi – Padi – Padi.
Studi Penilaian Kinerja Sistem Irigasi dengan pendekatan permen PUPR No.12/PRT/M/2015 dan PSETK untuk prioritas penanganan dengan metode AHP pada Daerah Irigasi Kaligawe kabupaten Klaten. Prasetyaningrum, Ndaru; Prayogo, Tri Budi; Sayekti, Rini Wahyu
Jurnal Teknologi dan Rekayasa Sumber Daya Air Vol. 2 No. 2 (2022): Jurnal Teknologi dan Rekayasa Sumber Daya Air (JTRESDA)
Publisher : Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/ub.jtresda.2022.002.02.06

Abstract

Untuk memaksimalkan pemanfaatan sumber daya air di bidang pertanian di DI Kaligawe perlu diadakan Penilaian Kinerja Irigasi. Dalam penelitian ini memakai metode Penilaian Kinerja Irigasi Permen PUPR No. 12/PRT/M/2015 dan PSTEK (Profil Sosial Teknik Ekonomi Kelembagaan), untuk menetukan skala prioritas penangan menggunakan metode AHP (Analytical Hierarchy Process) dengan bantuan paket program Super decission 2.10.Hasil Penilaian dengan Metode Permen PUPR No. 12/PRT/M/2015 Indeks Kinerja sebesar 82,57% , yang terdiri dari aspek Prasarana Fisik 37,67%, Produktitas Tanam 13,88%, Sarana Penunjang 5,69%, Organisasi Personalia 12,90%, Dokumentasi 3,85%, P3A 8,575%.Dengan Metode PSETK skoring Profil Sosial sebesar 12 (Tinggi), skoring Profil Ekonomi sebesar 8 (Tinggi), skoring Profil Teknik 30 (Baik), skoring Profil Kelembagaan 17 (Cukup Baik).Prioritas penanganan dengan metode AHP bersumber dari Permen PUPR No. 12/PRT/M/2015 adalah Prasarana Fisik(0,171), sub-aspek Bangunan Utama (0,136).Prioritas penanganan dengan metode AHP berdasarkan PSETK adalah Profil Teknik (0,246).