Claim Missing Document
Check
Articles

Found 20 Documents
Search

IDENTIFIKASI PEMANFAATAN TRADISIONAL DAN PENAPISAN SENYAWA FITOKIMIA EKTRAK DAUN BINTANGUR (Callophyllum soulatri Burm F.) Violet Violet
EnviroScienteae Vol 14, No 1 (2018): EnviroScienteae Volume 14 Nomor 1, April 2018
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/es.v14i1.4896

Abstract

Bintangur (Callophylum soulatri) is one type of Family Callophylleae which is widely found in the forests of Borneo. This research attempts to identify the traditional using of Bintangur plant as a medicinal material and get the result of phytochemical compound from Bintangur leaf extract. Identification of the use of Bintangur plants is done using semi-structured interview techniques and literature review. The phytochemical compound preliminary test is carried out qualitatively by color change detection. Bintangur leaves can eliminate the disease vertigo (dizziness) and migraine. The dominant phytochemical compounds are flavonoids, steroid, and tannin. Phytochemical compounds that also dominant are phenol hydrocarbons and saponins. The alkaloid compound is not present in Bintangur leaves. The identification of phytochemical compounds from Bintangur leaf identifies the potential utilization of phytochemical compounds for various medicinal goals. The detection of steroid compounds with high concentrations indicates that Bintangur leaf has the potential to be used as a medicinal material to relieve chronic fatigue and pain. The presence of phenol compounds such as flavonoids, phenol hydrocarbons, and tannins indicates that the Bintangur leaf has bioactivity as antioxidants, antibacterials and anticancer.
BATA RINGAN DARI CAMPURAN LIMBAH SEKAM PADI DAN SERBUK GERGAJIAN Zainal Abidin; Sunardi Sunardi; Violet Violet
JURNAL PENGABDIAN AL-IKHLAS UNIVERSITAS ISLAM KALIMANTAN MUHAMMAD ARSYAD AL BANJARY Vol 3, No 2 (2018): AL-IKHLAS JURNAL PENGABDIAN
Publisher : Universitas Islam kalimantan MAB

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (586.774 KB) | DOI: 10.31602/jpai.v3i2.1258

Abstract

Kecamatan Tatah Makmur Kalimantan Selatan merupakan salah satu lumbung beras di Kalimantan Selatan.  Pada tahun 2013 luas tanam di Kecamatan Gambut sebesar 10.076 ha sehingga luas panennya menjadi 9,714 ha dengan produksi sebanyak 40.566 ton atau dengan rata-rata produksi 41,76 kw/ha. Limbah dari penggilingan padi berupa sekam padi menjadi masalah bagi masyarakat terutama masalah lingkungan dan kesehatan.  Salah satu solusi untuk memanfaatkan limbah sekam padi menjadi produk yang bernilai jual adalah pembuatan bata ringan yang ramah lingkungan sehingga kebutuhan akan bata ringan dapat terpenuhi.  Kegiatan Ipteks bagi Masyarakat bertujuan untuk menambah pengetahuan dan keterampilan petani dalam memanfaatkan limbah pertanian berupa sekam padi dengan campuran serbuk gergajian menjadi produk bata ringan.  Masyarakat yang menjadi mitra pada kegiatan Ipteks bagi Masyarakat (IbM) adalah Kelompok Masyarakat RT. 6 dan Kelompok Tani “Bina Desa” yang berlokasi di Desa Pemangkih Kecamatan Tatah Makmur Kalimantan Selatan.  Metode yang dilaksanakan pada kegiatan ini berupa penyuluhan tentang manfaat limbah sekam padi dan pelatihan pembuatan bata ringan kepada masyarakat.  Hasil kegiatan menunjukkan masyarakat memahami tentang manfaat limbah sekam padi dan mampu menerapkan pengetahuan dan teknologi yang telah diberikan oleh tim pelaksana kegiatan.
PKM PEMBUATAN BRIKET PENGUSIR NYAMUK DAN AROMATERAPI DI DESA MANDIANGIN BARAT KECAMATAN KARANG INTAN KABUPATEN BANJAR PROVINSI KALIMANTAN SELATAN Noor Mirad Sari; Violet Violet; Khairun Nisa
JURNAL PENGABDIAN AL-IKHLAS UNIVERSITAS ISLAM KALIMANTAN MUHAMMAD ARSYAD AL BANJARY Vol 5, No 1 (2019): AL-IKHLAS JURNAL PENGABDIAN
Publisher : Universitas Islam kalimantan MAB

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (574.931 KB) | DOI: 10.31602/jpaiuniska.v5i2.2363

Abstract

Briket arang pengusir nyamuk dan briket aromaterapi merupakan inovasi terbaru untuk meningkatkan nilai tambah dari briket arang. Selama ini pemanfaatan briket arang hanya terbatas sebagai energi alternatif terbarukan. Briket arang pengusir nyamuk merupakan campuran serbuk arang alaban dengan tumbuhan serai wangi dan cengkeh, sedangkan briket aromaterapi merupakan campuran serbuk arang alaban dengan serbuk Gaharu. Kegiatan program kemitraan masyarakat (PKM) bertujuan untuk memberikan pengetahuan kepada masyarakat untuk membuat briket arang pengusir nyamuk dari serai wangi dan cengkeh serta briket arang aromaterapi dari serbuk gaharu yang berguna untuk kesehatan. Mitra kegiatan PKM ini adalah kelompok masyarakat RT. 3 dan kelompok masyarakat RT. 4 Desa Mandiangin Barat, Kabupaten Banjar, Kalimantan Selatan. Penyampaian materi kegiatan melalui penyuluhan, dan pelatihan pembuatan briket pengusir nyamuk dan briket aromaterapi. Masyarakat yang menjadi mitra memberikan respon positif terhadap kegiatan yang dilaksanakan oleh Tim Pelaksana PKM Fakultas Kehutanan Universitas Lambung Mangkurat.
PRODUKTIVITAS DAN RENDEMEN KERAJINAN ANYAMAN BAMBAN (Donax canniformis) TERHADAP KONTRIBUSI PENDAPATAN PENGRAJIN DI DESA TANAH HABANG KECAMATAN LAMPIHONG KABUPATEN BALANGAN Rizqa Ilma Nandya; Violet Violet; Zainal Abidin
Jurnal Sylva Scienteae Vol 5, No 3 (2022): Jurnal Sylva Scienteae Vol 5 No 3 Edisi Juni 2022
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/jss.v5i3.5709

Abstract

This study aims to determine and analyze the productivity, yield and income contribution of Bamban handicrafts in the form of bags and wallets for the community in Tanah Habang Village, Lampihong District, Balangan Regency.  The method used is direct observation at the site of the investigation and the interview method of the Bamban weavers as well as the use of the census method taken 100% of the 17 Bamban weavers in Tanah Habang village.  The results of this study indicate that the average time needed for craftsmen to make bags is 1.83 hours, while the average time needed to make wallets is 1.08.  The yield from Bamban Bags ranged from 63.38% to 80.98%, with the average yield from Bamban Bags being 71.2% while the average yield from Bamban Bags was 77.25%.  The average income contribution of artisans to Bamban weaving is 66% and there are three people with 100% contribution, namely Saripah, Riana and IsmiPenelitian ini bertujuan untuk mengetahui dan menganalisis besarnya produktivitas, rendemen dan kontribusi terhadap pendapatan kerajinan Bamban berupa tas dan dompet bagi masyarakat di Desa Tanah Habang Kecamatan Lampihong Kabupaten Balangan. Metode yang digunakan adalah observasi langsung di lokasi penelitian dan metode wawancara terhadap pengrajin anyaman Bamban dan menggunakan metode sensus yang di ambil 100% dari 17 orang pengrajin anyaman Bamban di Desa Tanah Habang. Hasil yang diperoleh dari penelitian ini bahwa rerata waktu yang diperlukan pengrajin untuk menghasilkan satu buah Tas yaitu 1,83 jam sedangkan rerata untuk membuat satu buah Dompet yaitu 1,08. Rendemen Tas Bamban berkisar antara 63,38% - 80,98% dengan rerata rendemen Tas Bamban yaitu 71,2%, sedangkan untuk rerata rendemen Dompet Bamban yaitu 77,25%.  Rerata kontribusi pendapatan pengrajin terhadap anyaman Bamban sebesar 66% dan terdapat tiga orang dengan kontribusi 100% yaitu pada responden Saripah, Riana, dan Ismi.
PRODUKTIVITAS DAN RENDEMEN PAPAN BLOK DARI EMPULUR KAYU SENGON (Paraserianthes falcataria) PT SURYA SATRYA TIMUR BANJARMASIN Septi Andriani; Kurdiansyah Kurdiansyah; Violet Violet
Jurnal Sylva Scienteae Vol 1, No 2 (2018): Jurnal Sylva Scienteae Vol 1 No 2, Edisi Oktober 2018
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (413.922 KB) | DOI: 10.20527/jss.v1i2.488

Abstract

Tujuan penelitian untuk mengetahui produktivitas dan rendemen pembuatan papan blok dari empulur kayu sengon PT. Surya Satrya Timur Banjarmasin. Pembuatan papan blok dipengaruhi oleh beberapa faktor seperti produktivitas dan rendemen. Produktivitas berhubungan dengan kemampuan menghasilkan produk dalam waktu tertentu, sedangkan rendemen berkaitan dengan jumlah yang dihasilkan dalam kualitas tertentu.Objek penelitian yaitu para pekerja bagian produksi papan blok, bahannya adalah empulur kayu sengon, peralatan yaitu berupa stopwatch, jam tangan, kalkulator, laptop, kamera, tallysheet dan alat tulis. Pengamatan produktivitas menggunakan Nol Stop Method, menggunakan 2 stopwach dan jam tangan dalam pengukuran lamanya waktu kerja untuk membuat 1 buah papan blok (satuan waktu). Pengamatan rendemen dengan menghitung m³ empulur kayu sengon guna mengetahui banyaknya output (papan blok), input (empulur kayu sengon) pada unit kegiatan produksi. Hasil penelitian menunjukkan bahwa nilai rata-rata produktivitas masih terbilang kecil yaitu 0,018 m³/jam. Hal ini disebabkan oleh beberapa faktor seperti bahan baku yang belum siap untuk diolah, dan bahan baku yang masih basah belum bisa digunakan. Selain itu ada faktor lain yang mempengaruhi tinggi rendahnya produktivitas yang berasal dari manusia : tingkat keahlian, sikap disiplin, kemampuan dan kecepatan dalam menyelesaikan pekerjaan, umur, masa bekerja dan lain sebagainya. Sedangkan untuk nilai rata-rata rendemen adalah 42,179 %, nilai tersebut masih rendah. Hal ini karena bahan baku yang kurang baik, dan masih banyak yang terbuang karena adanya cacat seperti retak dan pecah pada saat proses produksi.
KUALITAS BRIKET ARANG DARI LIMBAH ARANG KAYU ULIN (Eusideroxylon zwageri Teijsm. & Binned) PT. CITRA PRIMA UTAMA KECAMATAN LIANG ANGGANG KOTA BANJARBARU Yulian Taufik; Violet Violet; Yuniarti Yuniarti
Jurnal Sylva Scienteae Vol 1, No 1 (2018): Jurnal Sylva Scienteae Vol 1 No 1, Edisi Agustus 2018
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (653.608 KB) | DOI: 10.20527/jss.v1i1.437

Abstract

Kebutuhan energi di Indonesia saat ini dipengaruhi oleh ketersediaan energi yang berasal dari fosil seperti batubara serta minyak bumi dan gas bumi yang tidak dapat diperbaharui (unrenewable), dengan keterbatasan energi tersebut pemerintah mencari energi alternatif yang dapat diperbaharui (renewable) salah satunya berupa briket. Penelitian ini bertujuan untuk mengetahui kualitas briket arang dari limbah arang kayu ulin (Eusideroxylon zwageri) serta mengetahui besarnya pengaruh ukuran serbuk 60-80 mesh dan 80-100 mesh dengan kadar perekat 3 %, 5 % dan 7 % terhadap kadar air , kerapatan, zat terbang, kadar abu, fixed carbon dan nilai kalor dari briket arang. Pembuatan briket arang menggunakan metode rancangan acak lengkap 3 x 2 ( 3 ulangan 2 perlakuan). Hasil pengujian diperoleh nilai terbaik kadar air terdapat pada perlakuan A₁B₂ sebesar 2,124 %, kerapatan pada perlakuan A₃B₁ sebesar 0,606 gr/cm³, zat terbang pada perlakuan A₁B₁ sebesar 27,1 %, kadar abu pada perlakuan A₁B₁ sebesar 43,667 %, fixed carbon pada perlakuan A₃B₁ sebesar 9,779 % dan nilai kalor pada perlakuan A₁B₁ sebesar 3945 kal/gr
PRODUKTIVITAS, RENDEMEN DAN KONTRIBUSI KERAJINAN BAMBU (Bambusa sp) TERHADAP PENDAPATAN DI DESA TAMBAK BARU KECAMATAN MARTAPURA TIMUR KABUPATEN BANJAR Gusti Ahmad Erfani; Zainal Abidin; violet violet
Jurnal Sylva Scienteae Vol 3, No 3 (2020): Jurnal Sylva Scienteae Vol 3 No 3, Edisi Juni 2020
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (712.366 KB) | DOI: 10.20527/jss.v3i3.2182

Abstract

Non-timber forest products are generally used for their own needs, building materials and craft materials. Non-wood species that are widely available in the field are bamboo. Bamboo is widely used by the community for various kinds of crafts through various processing processes. The results showed the average time needed by the craftsmen to produce one Bungkalang that is 3.01 hours and make one fruit that is 4.36 hours. Factor affecting productivity include length of time work, individual ability, age of craftsman, and level education. The yield of Bungkalang ranged from 63.86%-70.68% with the overall average yield of Bungkalang handicrafts 66.6% and tampirai ranging from 64.43%-72.12% with the average yield of Tampirai handicrafts 67.76%. The average raw material cost of bungkalang craftsmen is Rp.5,707,500/year. The average total income of artisans is Rp12,230,400/year, with an average net income of Rp6,522,900 a year.The total income of the attached craftsmen is Rp.17,348,181.82 / year, with an average raw material cost of Rp7,517,500/year. The average net income of the craftsman of the tampirai is Rp9,830,600/year. and total income of Rp13,980,000 / year. The income from the bungkalanghandicraft is Rp71.752.000/year with average income of Rp6.522.900/tahun, and average contribution 41,85%. The income from the tempirai handicraft is Rp108.137.000/year with average income of Rp9.830.600/year, and average contribution 49,08%. The total income of all craftsmen is Rp224,537,000/year, with an average of Rp20,412,400/year.
PENGARUH PENAMBAHAN SERBUK GAHARU (Aquilaria malaccensis) TERHADAP KARAKTERISTIK BRIKET ARANG AROMATERAPI DARI LIMBAH ARANG SERBUK KAYU CAMPURAN Eky Saputra; Violet Violet; Noor Mirad Sari
Jurnal Sylva Scienteae Vol 3, No 4 (2020): Jurnal Sylva Scienteae Vol 3 No 4, Edisi Agustus 2020
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (412.46 KB) | DOI: 10.20527/jss.v3i4.2344

Abstract

This studygaims to analyze the characteristics of aromatherapy charcoal briquettes from mixed wood charcoal powder waste and agarwood wood carried out organoleptic tests in the form of the old ability to burn briquettes to ash  when aromatherapy charcoal spreads in a room. The results of the study showed that of the highest charcoal briquette density average value was (0.90 gr/cm3) and the lowest (0.82 gr/cm3), highest moisture content value of (9.33%) and the lowest of (8.46%). Value of flying substances levels (47.9%)  and the lowest is (40.66%). Value of the highest ash content characteristics of (40.37%) and the lowest (33.28%). Testing the highest average value of bonded carbon characteristics is 28.82% and the lowest is (9.305%). Value of the highest heating characteristics (4174,696 cal/gr) and the lowest (3784,976 cal/gr). From all the results of the testing of the characteristics of the aromatherapy charcoal briquettes from the mixture of wood charcoal powder and agarwood powder waste on average do not meet ASTM testing standards. The organoleptic test of mold without holes that most quickly consumes aromatherapy at a concentration of 6 grams with 5 minutes and the longest smell of aromatherapy is 12, 18, and 24 grams with 7 minutes with an average of 46 minutes. And organoleptic test with the fastest hollow molds smelled at concentrations of 12 grams, 18 grams, 24 grams at 15 seconds, and on average each concentration had a scent that runs out at 7 minutes with an average of 55 minutes long liters of briquettes.Keywords : Characteristics of Charcoal Briquettes; Organoleptic Test; Mixed Wood Charcoal Waste and Agarwood
SIFAT FISIKA DAN KETEGUHAN PATAH PAPAN SEMEN PARTIKEL DARI PELEPAH KELAPA SAWIT (Elaeis guineensis Jack) Violet Burhanuddin
Jurnal Hutan Tropis Vol 13, No 1 (2012): Jurnal Hutan Tropis Borneo Volume 13 No 1 Edisi Maret 2012
Publisher : Lambung Mangkurat University-Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/jht.v13i1.1493

Abstract

Penelitian ini bertujuan untuk mengetahui kemungkinan pemanfaatan pelepah kelapa sawit sebagai bahan baku papan semen partikel dan untuk mengetahui sifat fisika dan mekanika papan semen partikel pada berbagai perbandingan semen dan partikel dari dua merek semen (Tonasa dan Tiga Roda). Penelitian ini menggunakan Rancangan Acak Lengkap (RAL) dengan pola faktorial 2 x 3 sebanyak 5 kali ulangan, dimana faktor A adalah merek semen yaitu semen tonasa dan semen Tiga Roda kemudian faktor B adalah perbandingan antara partikel dan semen. Hasil pengujian sifat fisika dan mekanika masing-masing menunjukan pengaruh yang sangat berbeda nyata, hal ini disebabkan karena semakin banyak penambahan jumlah perekat semen maka semakin baik pula sifat fisika dan mekanika papan semen yang dibuat, sedangkan untuk faktor merek semen tidak menunjukan perbedaan yang nyata.Kata kunci : Pelapah kelapa sawit, sifat fisika dan mekanika, papan semen partikel.
KARAKTERISTIK DAN UJI POT ORGANIK BERBAHAN DASAR LIMBAH KULIT GALAM (Melaleuca cajuputi) DAN ENCENG GONDOK (Eichornia crassipes) SEBAGAI PENGGANTI POLYBAG Noor Mirad Sari; Violet Violet; Khairun Nisa; Shinta Ajar
Jurnal Hutan Tropis Vol 9, No 3 (2021): JURNAL HUTAN TROPIS VOLUME 9 NOMER 3 EDISI NOVEMBER 2021
Publisher : Lambung Mangkurat University-Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/jht.v9i3.12331

Abstract

The forestry and plantation sectors till now, the mass supply of seeds still using polybags made from plastic. The purpose of the study was to examine the physical characteristics and test the organic pots based on waste from galam skin and water hyacinth as well as to find out the best basic ingredients for making organic pots. The research method used was Completely Randomized Design (CRD) with 5 treatments and 3 replications. The results of organic pot testing for water content ranged from 4.2133 – 6.033%, all treatments met the SNI standard 03-2105-2006 (<14%). The range of water absorption values is 97.9981 – 176.2218% and the SNI 03-2105-2006 standard does not require water absorption values. Density values ranged from 0.3584 – 0.8767 gr/cm3, A, C, D, E treatments were included in the SNI 03-2105-2006 standard. The best treatment of organic pot water content was in treatment A (100% galam peel waste), water absorption was found in treatment E (100% water hyacinth) and the best density was found in treatment E (100% water hyacinth. Results of organoleptic test of organic pots Based on the preference for color and texture, the highest was found in treatment A (100% galam bark waste) with a very hard texture and blackish color