Claim Missing Document
Check
Articles

Found 6 Documents
Search

Determination of Overpressure Zone and Its Mechanism in Baong Formation of the "Y" Field in North Sumatera Basin Andrea Hasbullah; Hendra Amijaya; Jarot Setyowiyoto
Journal of Applied Geology Vol 8, No 1 (2023)
Publisher : Geological Engineering Department Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/jag.63556

Abstract

The “Y” Field is one of the offshore areas in the North Sumatra Basin which is believed to have an important role in hydrocarbon exploration in the future. The North Sumatra Basin is known as an area that has high overpressure conditions and sometimes overpredicts in determining the amount of overpressure, especially in the Baong Formation. The purpose of this research is to determine the top and bottom overpressure zones, to know the vertical distribution of overpressure, and to find the main factors causing the overpressure in the Baong Formation.The data used in this study were 5 wells which have wireline log data, formation pressure data, leak of test, final well reports, mud logs, as well as 29 lines of 2D seismic data and 1 3D seismic data. The method used in this study was the Eaton method to determine pore pressure whereas the cross-plot wireline log method, the AI (acoustic impedance) inversion method and the stacking velocity were used to determine pore pressure.The study indicated that the overpressure zone is located in the Baong Formation at 1650 - 2108 m depth with a pore pressure of around 2891.70 - 3580 psi.  The overpressure is caused by loading mechanism, namely disequilibrium compaction. This is influenced by the thickness of the formation above Baong Formation.
ANALISIS PERFORMA DIAMOND BIT DAN CONE BIT DENGAN MENGGUNAKAN METODE SPECIFIC ENERGY DI LAPANGAN JS SUMUR P2 DAN Q5 PT. PERTAMINA ASSET 3 Hasbullah, Andrea; Bungasalu, Benny Abraham; Mulyadi, Mulyadi
Petro : Jurnal Ilmiah Teknik Perminyakan Vol. 12 No. 3 (2023): SEPTEMBER
Publisher : Jurusan Teknik Perminyakan Fakultas Teknologi Kebumian dan Energi Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/petro.v12i3.17095

Abstract

The JS field in the North West Java Basin consists of 6 formations, namely Jatibarang, Talang Akar, Baturaja, Upper Cibulakan, Parigi, Cisubuh formations. The formation that is proven to have the potential to develop is the Middle Cibulakan formation. The formations have different hardness characteristics and certainly require different bits to penetrate the specified formation.From these indications, the performance of the drill bits used in the JS field will be analyzed, namely the P2 and Q5 wells. In the P2 well, the performance of the Diamond Bit drill bit at a depth of 0-2500 ft is analyzed. While the Q5 well uses a Roller Cone Bit drill bit at a depth of 0-3000ft. The method used is Specific energy.From the bit performance analysis, the rocks penetrated are from the softest, medium to hard. For Diamond Bit on runs 1-2 show a low value because the penetrated formation is still soft, on runs 3-5 begin to show an increase in SE value because the formation is medium. And on runs 6-8 show a high value because the formation has started to hard. As for the Roller Cone Bit in runs 1-2 shows a low value because the formation is relatively soft, there is an increase in runs 3-5 although there is a decrease in the 4th run due to formation incompactness. However, the 6-8 runs show an increase again because the penetrated formation is classified as hard. So it can be concluded that the rock formation factor can affect the performance of the drill bit.
INVESTIGASI EKSPERIMENTAL PENGARUH KANDUNGAN KIMIA AIR PADA PENURUNAN VISKOSITAS MINYAK MENTAH BERAT DENGAN EMULSIFIKASI Heviyanti, Lindia; Hasbullah, Andrea; Kurniawan, Dinar Hananto
Petro : Jurnal Ilmiah Teknik Perminyakan Vol. 12 No. 4 (2023): DESEMBER
Publisher : Jurusan Teknik Perminyakan Fakultas Teknologi Kebumian dan Energi Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/petro.v12i4.18178

Abstract

Emulsi air dalam minyak mentah menyebabkan berbagai masalah dalam prosesnya. Akibatnya, sangat penting untuk menyelidiki sifat dan stabilitas emulsi. Penelitian ini pada dasarnya mengkaji pengaruh sifat kimia air terhadap stabilitas emulsi minyak mentah berat pada lapangan Kasikan untuk mengetahui bagaimana pengaruh konsentrasi garam NaCl terhadap stabilitas emulsi tersebut. Dengan membuat campuran yang memiliki variasi rasio 70% air dan 30% minyak berat serta 50% air dan 50% minyak pada kondisi awal dan selanjutnya dilakukan percobaan dengan penambahan garam NaCl pada fasa air dengan variasi 5% dan 10% NaCl. Hasil menggunakan bottle test sederhana, menunjukkan pada penambahan konsentrasi 10% memberikan hasil yang lebih stabil saat pengujian penambahan salinitas NaCl. Jenis emulsi yang terbentuk dapat digunakan dengan mengetahui pemisahannya untuk membantu perusahaan dalam melakukan optimasi sumur minyak tua agar minyak yang tebal, berat, permeabilitas yang buruk dan garis patahan yang tidak beraturan karena terproduksinya emulsi air dalam minyak (W/O) yang meneyebabkan masalah karena dapat mempengaruhi viskositas fluida. Penambahan salinitas NaCl 10% menunjukkan pengurangan viskositas semakin, sehingga fluida akan lebih mudah mengalir.
PETROGRAPHY OF PYROCLASTIC ROCK MOUNT MASURAI JAMBI PROVINCE Kirana, Febiyora Chandra; Nuriil Tadersi, Risnaliyah; Hasbullah, Andrea; Siregar, Anggi Deliana; Ritonga, D.M Magdalena; Utama, Hari Wiki; Misnawati, Misnawati
JOURNAL ONLINE OF PHYSICS Vol. 10 No. 1 (2024): JOP (Journal Online of Physics) Vol 10 No 1
Publisher : Prodi Fisika FST UNJA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22437/jop.v10i1.38349

Abstract

The magmatic arc of Sumatra Island, which is indicated by the presence of the Barisan Mountains zone on the west side of Sumatra Island with a general direction northwest - southeast, makes Mount Masurai, which is administratively in Merangin Regency, Jambi Province, become one of the volcanoes on Sumatra Island. Geographically, the peak of Mount Masurai is located at coordinates 101o 51' 28.60" E and 2o 30' 09.19" S with an elevation 2915 masl. The eruption period of Mount Masurai is estimated to have occurred twice during the eruption period. Based on the lack of information about volcanoes, this research was conducted to determine the characteristic and distribution of pyroclastics from Mount Masurai. In the area around Mount Masurai, remnants of volcanic eruptions were found, in the form of pyroclastic flows and falls. From data collection based on the results of geological mapping and petrographic analysis, pyroclastic rocks were found in the area around Mount Masurai with lithology in the form of Andesite Breccia, Laharic Breccia Pumice Breccia, Lapilli stone and Tuff. This is reinforced by the results of petrographic analysis of rock samples which are dominated by the presence of a glass
ANALISA TEKANAN PORI BAWAH PERMUKAAN PADA SUMUR “X” LAPANGAN “Y” Hasbullah, Andrea; Febiyora Chandra Kirana; Risnaliyah Nuriil Tadersi; Hari Wiki Utama; Herdiana Prasetyaningrum
Petro : Jurnal Ilmiah Teknik Perminyakan Vol. 14 No. 2 (2025): Juni 2025
Publisher : Jurusan Teknik Perminyakan Fakultas Teknologi Kebumian dan Energi Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/petro.v14i2.22636

Abstract

Pemboran merupakan kegiatan yang memiliki tingkat resiko dan biaya yang tinggi dimana dibutuhkan perencanaan yang matang untuk memperoleh keberhasilan pada kegiatan ini. Salah satu hal yang paling penting dalam kegiatan pemboran ini adalah penentuan tekanan pori yang menjadi fundamental mencegah terjadi nya masalah dalam pemboran seperti underpressure & overpressure yang mana sangat vital dalam mempengaruhi keselamatan dan efisiensi operasi pengeboran. Penelitian ini bertujuan untuk mengetahui pada kedalaman berapa overpressure dan underpresure terjadi dengan menggunakan data wireline log, data tes tekanan, data mud log dan final well report. Metode Eaton digunakan untuk menentukan nilai tekanan pori dengan menggunakan data wireline logging seperti data log sonik, densitas dan resistivitas. Berdasarkan hasil penelitian ini  didapati peningkatan nilai tekanan pori yang lebih besar dari tekanan normal hidrostatis pada kedalaman 1580, 8 m – 1740,4 m dan 2097 m – 2605 m yang diakibatkan oleh formasi yang didominasi oleh batuan lempung yang bersifat impermeable sehingga meningkatkan tekanan pori bawah permukaan atau disebut juga sebagai overpressure. Selain itu terjadi penurunan nilai tekanan pori yang lebih kecil dari tekanan normal hidrostatis pada kedalaman 1778,4 – 2052 m yang diindikasikan sebagai underpressure. Penyebab hal ini diakibatkan oleh formasi yag didominasi oleh batuan lempung dan pengaruh salinitas dan perubahan dari flow regime akibat pengaruh tektonik.
ANALISIS DATA GAYA BERAT UNTUK IDENTIFIKASI ZONA POTENSI LONGSOR DI GUNUNG KULU, LHOONG, ACEH BESAR Nuriil Tadersi, Risnaliyah; Setia Nugraha, Gartika; Chandra Kirana, Febiyora; Hasbullah, Andrea; Tanjung, Maulina; Wully Agustine, Diah
JOURNAL ONLINE OF PHYSICS Vol. 10 No. 3 (2025): JOP (Journal Online of Physics) Vol 10 No 3
Publisher : Prodi Fisika FST UNJA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22437/jop.v10i3.46401

Abstract

Kawasan Gunung Kulu, Lhoong, Aceh Besar, sudah sering terjadi sering terjadi longsor baik itu longsoran tanah maupun jatuhan batu. Penelitian ini bertujuan untuk menganalisis data gaya berat di wilayah Gunung Kulu, Lhoong, Aceh Besar untuk mengidentifikasi sebaran anomali gaya berat yang berkaitan dengan potensi kerentanan longsor. Metode gaya berat digunakan untuk mendeteksi variasi densitas batuan bawah permukaan melalui pengukuran gravitasi observasi (gobs), perhitungan Free Air Anomaly (FAA), Simple Bouguer Anomaly (SBA), Anomali Bouger Lengkap (ABL). Nilai ABL yang diperoleh berkisar antara 71,5 mGal hingga 82 mGal, dengan nilai tinggi terdapat pada bagian barat hingga barat daya wilayah studi yang menunjukkan adanya batuan berdensitas tinggi seperti basalt , sedangkan nilai rendah pada bagian timur menunjukkan adanya zona berdensitas rendah yang berpotensi menjadi jalur longsor. Penelitian ini memiliki keterbatasan pada distribusi titik pengukuran gaya berat di lapangan, di mana terdapat area kosong pada bagian tengah wilayah studi akibat kondisi medan yang sulit diakses dan keterbatasan waktu survei. Hasil penelitian ini memberikan informasi awal kondisi bawah permukaan sebagai upaya mitigasi bencana longsor di wilayah penelitian serta menjadi referensi untuk studi lanjutan di bidang geologi teknik dan geofisika lingkungan.