Nafis, Subhan
Puslitbangtek Ketengalistrikan, Energi Baru, Terbarukan dan Konservasi Energi, Kementerian

Published : 6 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 6 Documents
Search

KAJIAN TINGKAT EFIKASI LAMPU LED SWABALAST UNTUK PENCAHAYAAN UMUM, THE STUDY OF THE EFFICACY LEVEL OF SWABALAST LED LIGHT FOR GENERAL LIGHTING Palaloi, Sudirman; Nafis, Subhan; Emo, Sarimin
Ketenagalistrikan dan Energi Terbarukan Vol 14, No 1 (2015): KETENAGALISTRIKAN DAN ENERGI TERBARUKAN
Publisher : P3TKEBTKE

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Saat ini lampu LED menjadi salah satu pilihan sebagai sumber pencahayaan. Penggunaan LED sebagai sumber pencahayaan umum berkembang pesat dalam beberapa tahun terakhir. Lampu LED semakin populer dan sudah banyak ditemukan dipasaran. Hal ini disebabkan karena lampu LED lebih efisien dan memberikan kualitas yang lebih tinggi daripada lampu penerangan lainnya. Studi ini bertujuan untuk mendapatkan tingkat efikasi lampu LED untuk pencahayaan umum yang beredar di Indonesia. Metode yang digunakan adalah dengan melakukan pengujian tingkat efikasi lampu LED pada saat awal dinyalakan, dan setelah nyala 1000 jam. Hasil pengukuran menyatakan bahwa terdapat korelasi yang erat antara daya lampu dengan nilai flux. Ditemukan pula bahwa tingkat efikasi yang dihasilkan oleh lampu LED dapat dipertahankan rata-rata 98,7% dari nilai awalnya setelah mengalami aging selama 1000 jam. Pengukuran menunjukkan bahwa tingkat efikasi lampu awal pengujian berada pada rentang 56,3 – 119,5 [Lm/W] dengan rata-rata 86,9 [Lm/W]. Sedangkan efikasi setelah lampu di aging 1000 jam berada pada rentang 54,9 – 115,4 [Lm/W] dengan rata-rata 86,1 [Lm/W] yang sesuai dengan klaim LED secara umum Currently LED light has become a choice of source of light. The use of LED light as a general source of light is growing rapidly in recent years. LED light has become increasingly popular and could easily be found in the market. It is because LED light is more efficient and provides higher quality than other lighting. The aim of the study is to determine the level of efficacy in LED light for general lighting available in Indonesia. The use of the method is by doing a test on the efficacy rate of the LEDlights when it was first turned on and after 1000 hours flame. The result of the measurement suggests that there is a close correlation between the power of the light and the value of the flux. It was also found that the level of efficacy produced by LED light can be maintained in the average of 98.7% of its Ketenagalistrikan dan Energi Terbarukan initial value after 1000 hours aging. Measurements showed that the level of efficacy of the light in the initial testing was in the range of 56.3 to 119.5 [Lm / W] with the average of 86.9 [Lm / W]. While the efficacy after 1000 hours was in the range of 54.9 to 115.4 [Lm / W] with the average of 86.1 [Lm / W] which suitable with the claim of LED in general.
STUDI EKSPERIMENTAL PEMBAKARAN SERBUK BATUBARA PADA PEMBAKAR SIKLON; EXPERIMENTAL STUDY ON COAL POWDER COMBUSTION IN A CYCLONE BURNER Gunawan, Yohanes; Setiadanu, Guntur Tri; Nafis, Subhan
Ketenagalistrikan dan Energi Terbarukan Vol 14, No 2 (2015): KETENAGALISTRIKAN DAN ENERGI TERBARUKAN
Publisher : P3TKEBTKE

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Studi ekperimen pembakaran serbuk batubara kalori rendah menggunakan Pembakar Siklon telah dilakukan untuk  mempelajari pengaruh variasi aliran massa udara dan bahan bakar terhadap karakteristik pembakaran yang terjadi, dimana titik-titik temperatur diukur pada sepanjang badan Pembakar Siklon yang dibagi menjadi 4 titik pengukuran. Peningkatan suplai udara mengakibatkan konsentrasi gas hasil pembakaran cenderung naik dan mengakibatkan nilai equivalent ratio (ER) melebihi 1, dimana dengan nilai ER lebih dari 1 pembakaran akan kaya udara (lean). Emisi CO2, CO, NO dan NOx yang mempunyai nilai terendah dihasilkan dari campuran udara dan bahan bakar dengan nilai ER 1,09 atau nilai air fuel ratio (AFR) 7,6. Temperatur tertinggi untuk semua variasi campuran udara dan bahan bakar terjadi pada area inlet udara dan bahan bakar (T1). Pembakaran stabil terjadi pada komposisi emisi gas (O2 dan CO) terendah, dan nilai temperatur yang hampir sama pada setiap titik pengukuran, yaitu pada variasi feeder batubara 0,78 kg/menit dan blower udara 4,323 m3/menit dengan nilai AFR = 6,6 dan ER = 0,95. Experimental studies burning low calorie coal powder in a cyclone burner have been conducted to study the effect of variations in the mass flow of air and fuel to the combustion characteristics that occurred, where the temperature points measured at the whole body of the cyclone burner is divided into four  measurement points. Increased air supply result in  concentrations of combustion gases tend to rise and result in ER exceeds 1, where if the value of ER more than 1 combustion air would be rich (lean). Emissions of CO2, CO, NO and NOx which have the lowest value resulted from the mixture of air and fuel by the ER value is 1.09 or the value of AFR 7.6. The highest temperature for all variations of a mixture of air and fuel occurs in the area of air and fuel inlet (T1). The most stable combustion occurs on lowest gas emission composition(O2 and CO) and the temperature at each measurement point are almost the same, it's reached on variation of coal feeder 0.78 kg/min and air blower 4.323 m3/min with AFR value = 6.6 and ER = 0.95.
ANALISIS KEEKONOMIAN PENERAPAN PEMBANGKIT LISTRIK TENAGA SURYA PADA SISTEM KETENAGALISTRIKAN NIAS; THE ECONOMIC ANALYSIS OF SOLAR SYSTEM POWER PLANT IMPLEMENTATION IN NIAS ELECTRICAL SYSTEM Nafis, Subhan; Aman, Mohamad; Hadiyono, Adjar
Ketenagalistrikan dan Energi Terbarukan Vol 14, No 2 (2015): KETENAGALISTRIKAN DAN ENERGI TERBARUKAN
Publisher : P3TKEBTKE

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Biaya pokok produksi (BPP) pada sistem ketenagalistrikan area Nias cukup tinggi dikarenakan sebagian besar pembangkitnya mengunakan PLTD. Salah satu solusi untuk menekan BPP sekaligus mengurangi emisi karbon dari sektor pembangkit listrik adalah dengan menggantikan jam operasi PembangkitListrik Tenaga Diesel (PLTD) dengan Pembangkit Listrik Tenaga Surya (PLTS). Tulisan ini bertujuan untuk menganalisis keekonomi penggantian jam operasional PLTD dengan PLTS berdasarkan analisis terhadap sistem Gunung Sitoli, Teluk Dalam, dan Pulau Tello. Kapasitas PLTS dibatasi 20% dari bebanpuncak siang hari sistem-sistem di area Nias guna menjaga stabilitas sistem. Berdasarkan potensi energi matahari, biaya pengembangan sistem PLTS dan konsumsi bahan bakar PLTD, biaya energi PLTS lebih rendah dari biaya bahan bakar untuk PLTD. Jika PLTS sebagian dapat mengantikan operasi PLTD, maka konsumsi bahan bakar yang dapat dihemat kurang lebih senilai Rp. 1,26 milyar per tahun. Secara ekonomis penerapan PLTS sebagai pengganti jam operasional PLTD layak diterapkan pada sistem ketenagalistrikan Nias. The Cost of Production in Nias system is considerably high as the system mainly operates Diesel Power Plants. A possible solution to decrease the production cost and reduce the carbon emission from the power plant sector is to replace the operating hours of the Diesel power plants with Solar power plant (PV). The purpose of this paper is to analyze the economic value of this replacement based on the analysis of the system in Sitoli Mountain, Dalam Gulf and Tello Island. The total capacity of PV is limited only by 20% of the daytime peak load of the systems in Nias in order to maintain the system’s stability. Based on the solar energy potential, the cost of system development in PV and the fuel consumption in Diesel Power Plants, the cost of energy in PV is lower than the fuel cost in Diesel Power Plants. If the PV can partially replace the Diesel Power Plants operation, the fuel consumption can be saved for about Rp. 1,26 billion per year. Economically, the utilization of solar power as the  replacement for Diesel Power Plants operating hours is  reasonable in Nias electrical power system.
ANALISIS ALIRAN FLUIDA ALAT PENGERING PRODUK PERTANIAN MEMANFAATKAN PANAS BUANG TUNGKU BOILER PLT-BIOMASSA; THE ANALYSIS OF THE FLUID DYNAMICS IN AGRICULTURAL PRODUCT DRYER USING THE EXHAUST OF BIOMASS Firmansyah, Arfie Ikhsan; Nafis, Subhan; Suntoro, Dedi
Ketenagalistrikan dan Energi Terbarukan Vol 14, No 1 (2015): KETENAGALISTRIKAN DAN ENERGI TERBARUKAN
Publisher : P3TKEBTKE

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Pengeringan adalah salah satu metode pengawetan produk makanan dengan mengurangi kadar air di dalam sebuah peralatan yang dikenal sebagai alat pengering. Aliran fluida pada alat pengering dimodifikasi sedemikian rupa agar lebih optimal pada saat proses pengeringan. Analisis distribusi aliran dan temperatur fluida dilakukan untuk mendapatkan alat pengering produk pertanian yang optimal. Pada analisis ini digunakan pendekatan Computational Fluids Dynamics (CFD) untuk menganalisa alat pengering produk pertanian yang memanfaatkan gas buang dari furnace boiler pembangkit listrik tenaga biomassa berkapasitas 10 kW milik P3TKEBTKE.  Pengujian dilakukan menggunakan kecepatan alir gas buang 2,2 m/s dan 3,7 m/s dengan beberapa susunan tray pengering. Hasil analisis menunjukan alat pengering belum memiliki distribusi fluidaoptimal, perlu dilakukan modifikasi saluran keluar dan penambahan plat sehingga meningkatkan perbedaan suhu tiap tray yang hanya mencapai 2,5% Drying is one of the methods for preserving food products by reducing the amount of water inside the equipment which is known as dryer. The fluid dynamics in the dryer is modified in such a way to optimize the drying process. The analysis of the distribution of fluid dynamics and temperature is conducted to obtain the best agricultural product dryer. In this analysis, the Computational Fluids Dynamics (CFD) approach is applied to analyze the agricultural products dryer using the exhaust gasfrom the furnace boiler in biomass power plant with the capacity of 10 kW owned by P3TKEBTKE. The testing is done by using the 2.2 m/s and 3.7 m/s exhaust gas flow velocity with some tray dryer formations. The result of the analysis shows that the dryer has not possessed the best fluid distribution, an exit line modification and plat addition is needed in order to increase the temperature difference of each tray which only reached 2.5 %.
EVALUASI KINERJA PEMBANGKIT LISTRIK TENAGA MIKROHIDRO (PLTMH) Studi Kasus: PLTMH Kombongan, Kab. Garut, Jawa Barat Nafis, Subhan; Berlian, Akbar; Anggono, Tri; Maksum, Hasan
Ketenagalistrikan dan Energi Terbarukan Vol 11, No 1 (2012): KETENAGALISTRIKAN DAN ENERGI TERBARUKAN
Publisher : P3TKEBTKE

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Setiap pembangkit tenaga listrik yang telah dibangun dan dilakukan pengujian operasi oleh kontraktor, harus melaksanakan uji laik operasi oleh pihak ketiga untuk memastikan pembangkit beroperasi dengan baik dan efisien. Kegiatan evaluasi kinerja pembangkit listrik di Indonesia merupakan usaha jasa penunjang tenaga listrik yang telah diatur dalam Undang Undang No 30 tahun 2009. Dalam tulisan ini disajikan hasil pengujian uji kinerja pada PLTMH Kombongan sebagai bentuk pelaksanaan Undang-undang tersebut dengan mengikuti aturan atau standar internasional pengujian kinerja pembangkit listrik tenaga air skala kecil (IEC 60041). Cakupan evaluasi sistem ketenagalistrikan PLTMH Kombongan ini hanya sebatas sistem pembangkitan tenaga listrik yang terdiri dari tubin, generator dan konstruksi sipil secara umum. Evaluasi ini dilakukan dengan melakukan pengukuran menggunakan power quality analyzer dan water current meter serta melakukan pemeriksaan terhadap getaran dan kebisingan peralatan. Hasil pengujian menunjukan bahwa kinerja PLTMH Kombongan masih berada di bawah nilai desain. Hal ini terkait erat dengan sistem perawatan yang dilakukan dan usia komponen utama pembangkit. Any power station which has been duly installed and commissioned by contractor should be tested by a third party to confirm that all its parts and systems are performing their assigned functions correctly and generating units are operating efficiently.The evaluation of power generation performance in Indonesia is the power of business support services that have been regulated in Law No. 30 of 2009. This paper presents results of Kombongan Micro Hydro Power Plant (MHP) performance test reffering to the rules or international standards of performance testing for small scale hydro power plant (IEC 60041). Scope of evaluation of the MHP-Kombongan electricity system is only limited at electric power generation system including the turbine, generator and civil construction in general. This evaluation is done by performing direct measurement using portable power quality analyzer, water current meter, examination of equipment vibration and noise. The analysis results show that MHP-Kombongan performance is still under design specification due to maintenance system applied and life time of the main components.
KENDALI PROPORTIONAL-INTEGRAL-DIFFERENTIAL (PID) PADA PEMODELAN TURBIN SUMBU VERTIKAL PEMBANGKIT LISTRIK TENAGA ARUS LAUT (PLTAL) DALAM KONDISI KECEPATAN ARUS LAUT YANG BERFLUKTUASI; PROPORTIONAL-INTEGRAL- DIFFERENTIAL (PID) CONTROL IN MODELING OF VERTICAL TURBINE FOR MARINE CURRENT POWER PLANT IN THE DIFFERENT SEA FLOW RATE CONDITION Wicaksono, Nanda Avianto; Aryanto, Arief; Nafis, Subhan
Ketenagalistrikan dan Energi Terbarukan Vol 16, No 2 (2017): KETENAGALISTRIKAN DAN ENERGI TERBARUKAN
Publisher : P3TKEBTKE

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

  Penelitian ini ditujukan untuk mengembangkan pengendali kecepatan putar turbin sumbu vertikal pembangkit listrik tenaga arus laut (PLTAL) pada kondisi kecepatan arus laut yang berfluktuasi. Kondisi kecepatan arus laut yang berfluktuasi tersebut direpresentasikan dengan model matematis Amin. Sistem PLTAL diuji dengan menggunakan dua skenario. Pada skenario pengujian pertama, sistem PLTAL diberi kecepatan arus laut rata-rata yang konstan yaitu: 0,6 m/s, 1,0 m/s, dan 1,6 m/s. Pada skenario kedua, sistem PLTAL diberi kecepatan arus laut rata-rata (v0) berbentuk gelombang sinusoidal yang bernilai antara 0,6-1,6 m/s. Pada kedua skenario pengujian tersebut, sistem PLTAL diberi nilai referensi kecepatan putar generator (g) yang meningkat dan menurun secara gradual. Hasil simulasi tersebut menunjukkan bahwa pengendali yang dikembangkan dapat menjaga kecepatan putar turbin sesuai dengan nilai referensinya meskipun pada kondisi kecepatan arus laut yang berfluktuasi. Selain itu, hasil simulasi tersebut juga menunjukkan bahwa torsi dan daya listrik yang dibangkitkan mengikuti nilai referensi kecepatan putar generator meski nilai rata- rata kecepatan arus laut yang diberikan tetap sama.  This research is intended to develop speed control of marine current vertical turbine in fluctuation current speed condition. The fluctuation current speed condition is represented by the Amin’s mathematics model. The power system has been tested using two scenarios. First scenario applied a method by giving the system a constant mean ocean current velocity of: 0.6 m/s, 1.0 m/s, and 1.6 m/s. The second scenario, system is given mean a sinusoidal wave forming between 0.6-1.6 m/s. In both test scenarios, the marine current power plant system is rated the rotational speed reference value of the generator which increases and decreases gradually. The simulation result shows that the developed controller is able to maintain the generator speed at its referred value although the current speed condition is in fluctuation. The simulation result also shows that the torque and the generated power follow the generator speed reference although the average of the current speed system is constant.