cover
Contact Name
Marjuki Zulziar
Contact Email
marjuki.zulziar@gmail.com
Phone
-
Journal Mail Official
marjuki.zulziar@gmail.com
Editorial Address
-
Location
Kota tangerang selatan,
Banten
INDONESIA
TEKNOLOGI : Jurnal Ilmiah dan Teknologi
Published by Universitas Pamulang
ISSN : 26205726     EISSN : -     DOI : -
Jurnal TEKNOLOGI ; Jurnal Ilmiah dan Teknologi, bertujuan untuk menyediakan forum komunikasi dan sarana publikasi bagi peneliti, pendidik, praktisi dan mahasiswa yang memiliki minat dibidang teknologi, ilmu pengetahuan dan sains. Jurnal TEKNOLOGI; jurnal ilmiah dan Teknologi ini memuat hasil-hasil penelitian dibidang Ilmu pengetahuan dan Sains, inovasi teknologi dan aplikasi industri.
Arjuna Subject : -
Articles 6 Documents
Search results for , issue "Vol. 8 No. 1 (2025): Teknologi : Jurnal Ilmiah dan Teknologi" : 6 Documents clear
Optimalisasi Perawatan Mesin Ice Macer dengan Pendekatan Metode Total Productive Maintenance (TPM) dan Metode Overall Equipment Effectiveness (OEE) untuk Peningkatan Operasional Mesin Junaenah; Edi Suprapto; Rusmalah
Teknologi : Jurnal Ilmiah dan Teknologi Vol. 8 No. 1 (2025): Teknologi : Jurnal Ilmiah dan Teknologi
Publisher : Universitas Pamulang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32493/tkg.v8i1.52015

Abstract

 Micro and small businesses engaged in ice cube production are highly dependent on the reliability of their production machines. A decrease in machine performance can have a direct impact on product quality and quantity. This study aims to analyze the actual condition of the machine, determine the appropriate type of maintenance, and apply the Total Productive Maintenance (TPM) concept to improve machine effectiveness. The methods used include direct inspection, cycle time measurement, and Overall Equipment Effectiveness (OEE) calculation. The results showed that the OEE value was at 76.12%, with an availability value of 91.67%, a performance rate of 92.31%, and a quality rate of 90%. This value indicates that the machine is in fairly good condition but needs periodic preventive repairs. Maintenance recommendations include the implementation of Autonomous Maintenance, operator training, and a structured maintenance schedule. Keywords: SME,Overall Equipment , Total Productive Maintenance  
ANALISIS KESELAMATAN DAN KESEHATAN KERJA PADA DEPARTEMEN PRODUKSI UNIT CANDY DENGAN METODE HAZARD IDENTIFICATION, RISK ASSESSMENT, AND DETERMINING CONTROL DI PT.MYI Yusuf, Muhammad; Syahabuddin , Agus
Teknologi : Jurnal Ilmiah dan Teknologi Vol. 8 No. 1 (2025): Teknologi : Jurnal Ilmiah dan Teknologi
Publisher : Universitas Pamulang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32493/tkg.v8i1.52577

Abstract

MYI is one of the largest food companies in Indonesia. In the production process of this factory, there are various high-risk activities, especially in the Candy production section. The objective of this research is to implement the Hazard Identification, Risk Assessment and Determining Control (HIRADC) method as an effort to prevent work accidents among workers in the Production Department of the Candy Unit at PT. MYI. This research was conducted observationally. Observations were made on the sources of hazards and control efforts. Interviews were conducted with workers in the input, production, and output sections of the Candy Unit at PT. MYI. The research variables include work in the Candy production process, hazard identification, risk assessment, effectiveness of risk control, and residual risk. The results of the hazard identification that has been carried out show that there are 39 potential hazards that can lead to 39 risks. The risk assessment conducted revealed a risk level of Very High for 2 cases, High for 10 cases, Medium for 8 cases, and Low for 19 cases. The recommendations that can be given from this study are that PT. MYI needs to create and socialize work instructions, provide training, create a periodic maintenance checklist, install covers and limit switches, install conveyor covers, regularly check light and noise levels, provide fire extinguishers, and provide a disposal site for hazardous waste (B3).  Keywords: Production hazard risk of the candy unit, HIRARDC, PT. MYI
ANALISA KUALITAS PRODUK ZINC DIE CAST UNTUK MENURUNKAN TINGKAT REJECT DENGAN METODE SIX SIGMA (DMAIC) DI PT. TST: ANALISA KUALITAS PRODUK ZINC DIE CAST UNTUK MENURUNKAN TINGKAT REJECT DENGAN METODE SIX SIGMA (DMAIC) DI PT. TST Aprina, Budi; Rudy, Anthon
Teknologi : Jurnal Ilmiah dan Teknologi Vol. 8 No. 1 (2025): Teknologi : Jurnal Ilmiah dan Teknologi
Publisher : Universitas Pamulang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32493/tkg.v8i1.52644

Abstract

 Micro and small businesses engaged in ice cube production are highly dependent on the reliability of their production machines. A decrease in machine performance can have a direct impact on product quality and quantity. This study aims to analyze the actual condition of the machine, determine the appropriate type of maintenance, and apply the Total Productive Maintenance (TPM) concept to improve machine effectiveness. The methods used include direct inspection, cycle time measurement, and Overall Equipment Effectiveness (OEE) calculation. The results showed that the OEE value was at 76.12%, with an availability value of 91.67%, a performance rate of 92.31%, and a quality rate of 90%. This value indicates that the machine is in fairly good condition but needs periodic preventive repairs. Maintenance recommendations include the implementation of Autonomous Maintenance, operator training, and a structured maintenance schedule. Keywords: SME,Overall Equipment , Total Productive Maintenance
KONSEP ERGONOMIK K3 UNTUK MENINGKATKAN EFEKTIVITAS DAN PRODUKTIVITAS KERJA DI PT. APL ibnu, freddy dwi; Sudewo
Teknologi : Jurnal Ilmiah dan Teknologi Vol. 8 No. 1 (2025): Teknologi : Jurnal Ilmiah dan Teknologi
Publisher : Universitas Pamulang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32493/tkg.v8i1.52646

Abstract

PT APL is a company engaged in the distribution of medical equipment and medicines, with a finance division. Financial data is processed in the operational area. Computers are used in all activities to run business operations. The purpose of this study is to analyze the relationship between ergonomic positions and work posture using the Rapid Office Strain Assessment (ROSA) method in relation to musculoskeletal disorder (MSD) complaints among employees of PT APL. This study shows that at PT APL Semarang, there are four main factors contributing to inadequate workplace ergonomics, namely humans, machines, materials, and methods. The ROSA assessment results revealed that 76.92% of employees are at high risk of musculoskeletal disorders, mainly influenced by the use of non-ergonomic chairs. Employees often lack awareness regarding proper chair height adjustment, leading to poor sitting posture. In addition, improper monitor placement and incorrect positioning of mouse and keyboard use also contribute to the high risk. Awareness of workplace facility adjustments and education on ergonomics in the workplace are crucial to reducing health-related risks for employees.   Keywords: Ergonomics, Musculoskeletal Disorders (MSDs), Work Posture, Employees, Risk, Rapid Office Strain Assessment (ROSA), and PT APL.
ANALISIS PERMINTAAN PRODUK ROTI MENGGUNAKAN METODE TRIPLE EXPONENTIAL SMOOTHING Supriyanti, Yanti; Nurselvi
Teknologi : Jurnal Ilmiah dan Teknologi Vol. 8 No. 1 (2025): Teknologi : Jurnal Ilmiah dan Teknologi
Publisher : Universitas Pamulang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32493/tkg.v8i1.52674

Abstract

CV. Larissa Boga Utama is local businesses moving in the food industry, in recent years experienced an increase in product demand due to changes in its marketing system through social media and e-commerce. However, the inventory management process is still carried out manually without demand planning. This study aims to analyze demand planning using the Triple Exponential Smoothing (TES) method. The forecasting results using the TES method with two years of historical sales data show a demand of 1,990 units for 2025, with a MAPE accuracy of 3.08% (very good category) and an MSE of 56.05. The results show that the TES method is effective in improving the efficiency of demand and inventory management at CV. Larissa Boga Utama..
PENINGKATAN PENGENDALIAN KUALITAS UNTUK MENURUNKAN REJECT PADA PRODUK COPPER BUSBAR DENGAN METODE QUALITY CONTROL CIRCLE (QCC) DAN FAILURE MODE EFFECT ANALYSIS (FMEA) DI PT. XYZ pratama, Gilang ardi; Khasbunalloh; Kurniasih, Nia
Teknologi : Jurnal Ilmiah dan Teknologi Vol. 8 No. 1 (2025): Teknologi : Jurnal Ilmiah dan Teknologi
Publisher : Universitas Pamulang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32493/tkg.v8i1.52804

Abstract

Sutrakabel Intimandiri is a company operating in the cable and copper industry. One of the products is copper busbar products. In copper busbar production, there is an obstacle in the form of a reject rate that exceeds the company's target ratio. Based on these problems, the methods used are Quality Control Circle (QCC) and Failure Mode Effect Analysis (FMEA) which aims to find factors that cause rejects in copper busbars. The results of the QCC and FMEA methods show the same high Pareto numbers, namely in the QCC method there are 7056 reject bubbles with a percentage of 43% and in the FMEA method there are 112 RPN reject bubble values with a percentage of 52.3%. In this analysis, looking for factors that cause reject bubbles is assisted by using fishbone with the 4M1E factor and improvements using the 5W1H method. The proposed improvements are to emphasize information related to SOPs strictly during daily briefings to reprimand workers if they still do not follow the SOPs, stricter supervision from the Unit Head by asking the relevant operator whether there are any problems currently occurring during the process, emphasizing the system. Autonomous Maintenance, implementing a checksheet for checking the quality of dies, revising the standard process by adding a water setting item to the manufacturing specification document, even though the manual provides the steps to be carried out, holding a machine and control checksheet every 30 minutes, the Section Head submitted a request to repair the roof which was already worn out.   Keywords: Quality, QCC, FMEA, fishbone, 5W1H

Page 1 of 1 | Total Record : 6