Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

JURNAL NASIONAL TEKNIK ELEKTRO

JNTE
Website

Published by Universitas Andalas

ISSN : 23022949 EISSN : 24077267 DOI : -

Core Subject : Engineering,

Electrical & Electronics Engineering

Jurnal Nasional Teknik Elektro (JNTE) adalah jurnal ilmiah peer-reviewed yang diterbitkan oleh Jurusan Teknik Elektro Universitas Andalas dengan versi cetak (p-ISSN:2302-2949) dan versi elektronik (e-ISSN:2407-7267). JNTE terbit dua kali dalam setahun untuk naskah hasil/bagian penelitian yang berkaitan dengan elektrik, elektronik, telekomunikasi dan informatika.

Arjuna Subject : -

Articles 16 Documents

1 2

Search results for , issue "Vol 9, No 3: November 2020" : 16 Documents clear

Optimal Smart Grid Management System in Campus Building Syarifah Muthia Putri; Dina Maizana
JURNAL NASIONAL TEKNIK ELEKTRO Vol 9, No 3: November 2020
Publisher : Jurusan Teknik Elektro Universitas Andalas

The utilization of well-managed electrical energy sources will result in high energy efficiency and reliability. Smart grid uses electricity management with 2-way communication that allows loads and sources to corporate each other. Campus is a place that requires priority in the availability of energy and it requires smart grid management. This research will contain smart grid management systems on campus that use multisource to fulfil dynamic loads conditions so as to produce optimal smart grid management. The method that use to analysis the system is conventional method. The optimal smart grid achieved by analysis the sources and loads energy needed and then create a management system that have substantial impact on campus electrical system. The results of this research that smart grid system ensures electrical conditions for the needs of these dynamic loads can be fulfilled which is without a smart grid there is lack of energy for 3 days, whereas with a smart grid there is no lack of energy in the campus building.Keywords : Smart Grid, Campus, Management

Design of a GSM-Based Skimming Reporting System for Automated Teller Machines Robert Agyare Ofosu; Mununi Fuseini; Ernest Quaye Nii Atuquaye
JURNAL NASIONAL TEKNIK ELEKTRO Vol 9, No 3: November 2020
Publisher : Jurusan Teknik Elektro Universitas Andalas

In recent years, there has been the unpleasant advent of a new type of credit card fraud called Automated Teller Machine (ATM) skimming. This type of fraud poses a substantial threat to the banking sector because its modus operandi is quite subtler than other known types of ATM fraud. It consists of a criminal implanting a disguised dummy card reader very similar to the ATM’s original card reader at the ATM. This is done to intercept the ATM card data of any unsuspecting customer who tries to withdraw cash. This paper seeks to design a system which will be able to detect and report such devices before they cause harm. The objective of this research was achieved by designing a skimmer incorporating the use of a metal detector for detecting new electronic components within the ATMs card slot region, an ultrasonic sensor for detecting unfamiliar skimmer overlays and the processing power of a microcontroller to coordinate theses sensors which monitor the status of the ATM terminal’s original card reader and send a Short Message Service (SMS) text message whenever the system detects that a skimmer has been attached to the ATM terminal. This concept of skimming detection was designed, tested and simulated under several operating conditions in Proteus 8.0 simulation software to prove the detection method’s efficacy. The simulation results showed that the proposed system provided a decent theoretical skimmer detection technique. However, other factors such as metal detector oscillator instability and the difficulty in accurately modelling the composition of ATM skimmers served as this design’s major drawbacks.Keywords : ATM, Skimming, GSM, Microcontroller

Analisis Perbandingan Unjuk Kerja Database SQL dan Database NoSQL Untuk Mendukung Era Big Data Ari Fadli; Mulki Indana Zulfa; Azis Wisnu Widhi Nugraha; Acep Taryana; Muhammad Syaiful Aliim
JURNAL NASIONAL TEKNIK ELEKTRO Vol 9, No 3: November 2020
Publisher : Jurusan Teknik Elektro Universitas Andalas

Recently, the development of data in the digital world has produced new challenges. The challenge is increasing number and complexity of data and variations in data (structured and unstructured). Conventional database management system (RDBMS) is not able to answer these challenges effectively because in RDBMS uses a related structured table approach to store information. Currently present, a database management system called NoSQL. This NoSQL system was introduced to provide quick scalability (amount and complexity) and unstructured data. In this study, we present the performance analysis of RDBMS and NoSQL database management systems in the case of increasing the number of data. We use the simple php page to test database systems, experiments are done with use four data sets of different sizes from academic information systems. The database NoSQL approach is used by Redis and the SQL database approach is used by MySQL. The results show that the noSql database has a execution time better than the MySQL database, there is an increase in the speed of the execution time by 87.58% in the create operation, 85.53% in the update operation, and in the delete operation by 86.40% and while in the read operation the increase in execution time speed is obtained by 57.09%, so that on average the Redis database has a show work better than the MySQL database at 79.15%..Keywords : MySql Database, Redis Database, PHP Programming AbstrakBaru-baru ini, perkembangan data di dunia digital telah menghasilkan tantangan baru. Tantangannya adalah meningkatnya jumlah dan kompleksitas data dan variasi data (terstruktur dan tidak terstruktur). Sistem manajemen basis data konvensional (RDBMS) tidak dapat menjawab tantangan ini secara efektif karena dalam hal ini RDBMS menggunakan pendekatan tabel terstruktur sebagai konsep dalam menyimpan informasi. Saat ini, telah hadir sistem manajemen basis data yang disebut NoSQL, Sistem NoSQL memiliki kemampuan menangani data yang tidak terstruktur yang jumlah dan kompleksitas terus meningkat. Dalam penelitian ini, kami menyajikan hasil analisis perbandingan unjuk kerja Sistem Manajemen Basis Data konvensional (RDBMS) dengan NoSQL pada kemampuannya dalam menangani pertumbuhan data yang terus meningkat. Metode yang digunakan dalam melakukan analisis perbandingan unjuk kerja RDBMS dengan NoSQL adalah waktu eksekusi yang dibutuhkan untuk melakukan operasi dasar pada sistem basis data yaitu create, read, delete dan update. RDMBS yang digunakan pada penelitian kali ini adalah MySQL sedangkan pada sistem NoSQL digunakan oleh Redis Database. Hasil penelitian menunjukkan bahwa Redis Database memiliki waktu eksekusi yang lebih baik daripada MySQL Database, terdapat peningkatan kecepatan waktu eksekusi tersebut sebesar 87.58% pada operasi create, 85.53% pada operasi update, dan pada operasi delete sebesar 86.40% dan sedangkan pada operasi read penigkatan kecepatan waktu eksekusi yang diperoleh sebesar 57.09%, sehingga secara rata-rata database Redis memiliki unjuk kerja yang lebih baik dari database MySQL yaitu sebesar 79.15%.Kata Kunci : MySql Database, Redis Database, Pemgoramaman PHP

Harmonics of CF and LED lamps - Maximum Penetration Perspective on Power Quality in Distribution Systems Francis Boafo Effah; Philip Gasu; Philip Okyere; Amevi Acakpovi
JURNAL NASIONAL TEKNIK ELEKTRO Vol 9, No 3: November 2020
Publisher : Jurusan Teknik Elektro Universitas Andalas

Global energy saving efforts have led to replacement of incandescent lamps with energy-efficient ones like light-emitting diode (LED) and compact fluorescent lamps (CFLs). These lamps, being non-linear loads, have the potential of injecting harmonics into distribution networks. In this paper, harmonics injection of common CFL and LED lamps at a facility point of common coupling is investigated. To gain insight into large scale penetration effects on power quality, field measurement results of popular lamps used in Ghana were replicated in MATLAB/Simulink through simulation. The field results showed that LED lamps exhibit more harmonics compared to CFL lamps. Maximum possible loading on a 100-kVA, 11kV/0.433kV distribution transformer was found to be 24.02% for CFL, 27.14% for LED, and 40.91% for a mixture of the two lamps, respectively, in order not to violate IEEE 519-2014 standard. The influence of other common loads such as ceiling fans on the lamps’ harmonics were assessed in the field measurement. The use of ceiling fans with the lamps in the facility reduced the harmonics and improved the power factor of the facility. Since the lamps exist in residential and commercial facilities with other loads, more penetration of energy-saving lamps in the distribution system will have little influence on power quality.Keywords: Compact fluorescent lamps, light emitting diodes, maximum power loading, total harmonic distortion, point of common coupling

Pengembangan Electronic Load Controller untuk Self-Excited Induction Generator Berbasis Penyearah Tiga Fase Menggunakan Raspberry Pi Ihsan Nur Hakim; Aan Listanto Amdrian; Adlan Bagus Pradana; Awang Noor Indra Wardana
JURNAL NASIONAL TEKNIK ELEKTRO Vol 9, No 3: November 2020
Publisher : Jurusan Teknik Elektro Universitas Andalas

A self-excited induction generator (SEIG) could provide electricity for isolated areas appropriately. An electronic load controller (ELC) with Raspberry Pi is designed to overcome the voltage and frequency changing of SEIG caused by load changing, while ab le to support distributed system trend with Framework for Distributed Industrial Automation and Control (4DIAC). The ELC design is based on the characteristics of SEIG and Indonesian electricity system standards. The design is then implemented, and the characteristics are identiﬁed. The output of SEIG is regulated at frequency of 50 Hz and terminal voltage of 294 V. A voltage sensor is designed with a transformer, ﬁlters, rectiﬁer, and ADC. The actuator consisted of a three-phase rectiﬁer, dump load, optocoupler driver, and IGBT. A PI-controller based on Python is applied in Raspberry Pi Zero with experimentally tuned Kp and Ki values both of 5.0. The output changing of SEIG caused by load changing could be regulated within the Indonesian electricity frequency standard in its steady state. The maximum voltage deviation from the nominal value is -12.24%, while the maximum frequency deviation is +3.2%, and the longest settling time is 832 ms.Keywords : induction generator, electronic load controller and Raspberry Pi.

IoT-Based Logistic Robot for Real-Time Monitoring and Control Patients during COVID-19 Pandemic Isa Hafidz; Dimas Adiputra; Billy Montolalu; Wahyu Andy Prastyabudi; Helmy Widyantara; Mas Aly Afandi
JURNAL NASIONAL TEKNIK ELEKTRO Vol 9, No 3: November 2020
Publisher : Jurusan Teknik Elektro Universitas Andalas

Coronavirus disease (COVID-19) is a disease that disrupts the respiratory tract and infects many people. However, until now, there is still no cure. Therefore a robot service is proposed to minimize direct contact between nurses and patients who are equipped with PPE (Personal Protective Equipment). Robot Service is a robot carrying logistics for patients in the Isolation Room. The robot is expected to be able to help medical personnel work and reduce the risk of medical personnel being exposed to the virus while in the Isolation Room. This robot has a feature to rotate and move along the hospital hallway, using either automatic or normal mode. This robot is also equipped with an Omni infrared camera that can see the environmental conditions around the robot so that it can make it easier for operators to run this robot with a Wi-Fi communication system. With this robot, medical workers can deliver the needs of patients without having to meet face to face, so that the risk of being exposed to the virus can be reduced.Keywords: Coronavirus, Hospital, Medical Personnel, Robot AbstrakCoronavirus disease (COVID-19) is a disease that disrupts the respiratory tract and infects many people. However, until now, there is still no cure. Therefore a robot service is proposed to minimize direct contact between nurses and patients who are equipped with PPE (Personal Protective Equipment). Robot Service is a robot carrying logistics for patients in the Isolation Room. The robot is expected to be able to help medical personnel work and reduce the risk of medical personnel being exposed to the virus while in the Isolation Room. This robot has a feature to rotate and move along the hospital hallway, using either automatic or normal mode. This robot is also equipped with an Omni infrared camera that can see the environmental conditions around the robot so that it can make it easier for operators to run this robot with a Wi-Fi communication system. With this robot, medical workers can deliver the needs of patients without having to meet face to face, so that the risk of being exposed to the virus can be reduced.Kata Kunci: Coronavirus, Hospital, Medical Personnel, Robot

Page 2 of 2 | Total Record : 16

1 2

Filter by Year

2020 2020

Filter By Issues

All Issue Vol 14, No 3: November 2025 Vol 14, No 2: July 2025 Vol 14, No 1: March 2025 Vol 13, No 3: November 2024 Vol 13, No 2: July 2024 Vol 13, No 1: March 2024 Vol 12, No 3: November 2023 Vol 12, No 2: July 2023 Vol 12, No 1: March 2023 Vol 11, No 3: November 2022 Vol 11, No 2: July2022 Vol 11, No 1: March 2022 Vol 10, No 3: November 2021 Vol 10, No 2: July 2021 Vol 10, No 1: March 2021 Vol 9, No 3: November 2020 Vol 9, No 2: July 2020 Vol 9, No 1: March 2020 Vol 8, No 3: November 2019 Vol 8, No 2: July 2019 Vol 8, No 1: March 2019 Vol 7, No 3: November 2018 Vol 7, No 2: July 2018 Vol 7, No 1: March 2018 Vol 6, No 3: November 2017 Vol 6, No 2: Juli 2017 Vol 6, No 1: Maret 2017 Vol 5 No 3: November 2016 Vol 5, No 3: November 2016 Vol 5, No 2: Juli 2016 Vol 5 No 2: Juli 2016 Vol 5 No 1: Maret 2016 Vol 5, No 1: Maret 2016 Vol 4 No 2: September 2015 Vol 4, No 2: September 2015 Vol 4, No 1: Maret 2015 Vol 4 No 1: Maret 2015 Vol 3 No 2: September 2014 Vol 3, No 2: September 2014 Vol 3, No 1: Maret 2014 Vol 3 No 1: Maret 2014 Vol 2 No 2: September 2013 Vol 2, No 2: September 2013 Vol 2 No 1: Maret 2013 Vol 2, No 1: Maret 2013 Vol 1, No 1: September 2012 Vol 1 No 1: September 2012 More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Syafii

Contact Email
jnte@ft.unand.ac.id

Phone
-

Journal Mail Official
Syafii@ft.unand.ac.id

Editorial Address
-

Location
Kota padang,

Sumatera barat

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Syafii

Contact Email jnte@ft.unand.ac.id

Phone -

Journal Mail Official Syafii@ft.unand.ac.id

Editorial Address -

Location Kota padang, Sumatera barat INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Syafii

Contact Email
jnte@ft.unand.ac.id

Phone
-

Journal Mail Official
Syafii@ft.unand.ac.id

Editorial Address
-

Location
Kota padang,

Sumatera barat

INDONESIA