Garuda - Garba Rujukan Digital

Awareness of Senior and Specialist Dental Student Toward the Importance of Cost Analysis and Business Practice Management: Cross Sectional Study from a Public University in Indonesia Anisa Nur Halimah, Aulia Ramadhani
Indian Journal of Forensic Medicine & Toxicology Vol. 14 No. 3 (2020): Indian Journal of Forensic Medicine & Toxicology
Publisher : Institute of Medico-legal Publications Pvt Ltd

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37506/ijfmt.v14i3.10680

Background: Dental students not only develop practical skills but also management skills. Dental students must be able to understand how to determine cost analysis, which is a measure of the relationship between costs and output. Objective: to determine the awareness of senior dental student toward the importance of cost analysis and business practice management. Materials and Method: A cross-sectional study was conducted using a questionnaire with closed-ended questions. The study sample included 119 participants in Airlangga Dental College, Surabaya. Statistical analysis was performed by descriptive statistical analysis and chi square tests. Results: One hundred nineteen questioners were returned and analyzed. BDS 95 students while the specialist was 24 students. It was seen that there are 79% of specialist students who have a good level of confidence while in BDS students only 51% have a good level of confidence. BDS students (42%) and specialist students (33%) indicated that their knowledge was sufficient about the costs of practice management or business management. Conclusion: students have confidence in clinical skills but are not quite sure about practice management knowledge. Students are also interested in increasing the range of knowledge about business and practice management.

PREVENTION OF COVID-19 INFECTION DURING DENTUREREPAIR FOR DENTAL ARTISAN IN LAMONGAN CITY: PENCEGAHAN INFEKSI COVID-19 SAAT REPARASI GIGITIRUAN PADA PARA TUKANG GIGI DI KABUPATEN LAMONGAN Endang Kusdarjanti; Okti Setyowati; anisa nurhalimah; Sujati; Eny Inayati
Darmabakti Cendekia: Journal of Community Service and Engagements Vol. 5 No. 1 (2023): JUNE 2023
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20473/dc.V5.I1.2023.32-38

Background: The lack of dentists in rural and remote areas has resulted in the dental profession being still in demand and in great demand in these areas. They do not have basic knowledge of dentistry and get that knowledge self-taught. The low knowledge of dental artisans on health sciences can cause the actions they take to endanger themselves and the health of consumers. Objective: To provide counseling and workshops on preventing Covid-19 infection during denture repair and manufacture of UV Sterilizers for dental artisans who are members of the Forum Komunitas Bikin Gigi (FOKABIG) in Kabupaten Lamongan in order to know the dangers of Covid-19 infection when performing dental repairs and other efforts. what to do to prevent it. Methods: Counseling and workshop on prevention of Covid-19 infection during denture repair and manufacture of UV sterilizer box. Results: This community service program was held in desa Candisari Kecamatan Sambeng Kabupaten Lamongan y by conducting counseling when performing denture repairs to avoid transmission of Covid-19 infection and workshops on making UV sterilization boxes for dental artisans who are members of the Forum Komunitas Bikin Gigi (FOKABIG). Conclusion: After attending counseling and workshops to prevent Covid-19 infection during denture repair and manufacture of UV box sterilizers, it is hoped that dental technicians will be able to carry out and run this program and run it regularly in doing so so as to prevent infections that can occur. Keywords: disinfection, denture, resin above, dental artisan

Upaya Promotif Kesehatan Gigi dan Mulut di Madura, Jawa Timur Ninuk Hariyani; Dini Setyowati; Anisa Nur Halimah; Arie Wahyu Prananta; Sri Hidayati; Mohtazul Farid; Hirmadhani Rahma Anindita
Jurnal Pengabdian Sumber Daya Manusia Vol. 2 No. 2 (2022): EDISI OKTOBER 2022
Publisher : Scholar Center

Show Abstract | Download Original | Original Source | Check in Google Scholar

Dental and oral health problems are closely related to people's productivity. Data in Madura shows that many areas in Madura have many dental and oral problems, in which the majority of them have not received any treatment. Good quality dental and oral health education program is still needed in Madura. This community service activity is carried out through a dental and oral health promotion program that is developed according to the resources, facilities and infrastructure owned by the target partners. The activity chosen as a solution at this stage is dental health counseling, given to the target group of women and community leaders who can later be empowered by becoming dental cadres or agents of change. In addition, counseling among children was also carried out using the story telling method. The results for these two target groups indicate an increase in their knowledge which is expected to lead to improved behavior related to dental health in Madura in the future.

FABRICATION OF MAYNE'S SPACE MAINTAINER FOR PREMATURE LOSS OF DECIDUOUS TEETH Goenharto, Sianiwati; Haula Robbi, M. Kautsar; Inayati, Eny; Setyowati, Okti; Kusdarjanti, Endang; Laksmi Lita Rosa, Mia; Sujati; Wahjuni, Sri; Redjeki, Sri; Nur Halimah, Anisa
Journal of Vocational Health Studies Vol. 7 No. 2 (2023): November 2023 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20473/jvhs.V7.I2.2023.121-125

Background: Premature loss for deciduous teeth is defined as the teeth that fall out before approaching the time of eruption of their replacement permanent teeth regardless of the reason for the loss of the teeth. The premature loss of deciduous teeth can cause the teeth next to the edentulous area to shift and lose arch space causing permanent teeth to grow abnormally. Prevention can be done by using Mayne's space maintainer so that the negative impact of premature loss does not occur. Purpose: Report the fabrication of Mayne's space maintainer in premature loss case. Case analysis: The laboratory accepted a working model with a case of premature loss in tooth 74 and was asked to make the Mayne's space maintainer. Result: This appliance consists of a molar band attached to tooth 75 with a 0.9 mm loop that is soldered on the buccal of the molar band. Conclusion: It is concluded that fabrication of Mayne's space maintainer in the case of premature loss of tooth 74 includes the preparation of a working model, adjustment of the molar band on tooth 75, making the loop, followed by soldering the loop to the molar band, finally the finishing and polishing.

FABRICATION OF SIMPLE SPACE REGAINER FOR SPACE LOSS CASE Goenharto, Sianiwati; Rusdiana, Elly; Rahmadani, Annisa; Inayati, Eny; Ratwita, Rr. Dwiyanti Feriana; Setyowati, Okti; Wahjuni, Sri; Halimah, Anisa Nur; Sujati; Kusdarjanti, Endang
Journal of Vocational Health Studies Vol. 6 No. 3 (2023): March 2023 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20473/jvhs.V6.I3.2023.185-189

Background: Anterior crossbite is a case that when upper anterior are positioned palatally than lower anterior teeth in centric occlusion. Orthodontic appliances using expansion screw could be solution for tooth anterior crossbite treatment. Purpose: To figure out the optimal fabrication process of orthodontic appliances in single tooth anterior crossbite case using expansion screw. Case analysis: Dental laboratory provided the maxillary dental appliance with single tooth anterior crossbite on teeth 21. Dental technician also received orthodontic appliance using expansion screw. Result: Orthodontic appliance design was Adams claps on teeth 16, 26, labial bow on teeth 13, 12, 11, 21, 22, 23. Additional posterior bite plane, also expansion screw was located on maxillary left first incisor, palatal section. Conclusion: Design and making orthodontic appliances using expansion screw begins with drawing design, positioning Adams clasps and labia bow sectional screw mini mounting, then acrylic packing. Final step was finishing polishing acrylic plate.

MAKING DIAGNOSTIC WAX UP OF MAXILLARY ANTERIOR TEETH IN CROSS BITE CASES Sri Redjeki Indiani; Sianiwati Goenharto; Anisa Nur Halimah; Widiya Ulfa; Narta Nikita Sari; Winda Kusumawardani; Dinda Nur Agustin
Journal of Vocational Health Studies Vol. 9 No. 1 (2025): July 2025 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20473/jvhs.V9.I1.2025.70-76

Background: An anterior crossbite is a type of malocclusion in which one or more maxillary anterior teeth are positioned lingually to the mandibular anterior teeth, compromising aesthetics and reducing patient confidence. A thorough understanding of the patient's chief complaint is essential for developing an effective treatment plan. A diagnostic wax-up is recommended to improve predictability and facilitate the modification of maxillary and mandibular relationship ultimately enhancing aesthetic outcome. Purpose: To describe the procedure for creating a diagnostic wax-up of the maxillary anterior teeth in an anterior crossbite case for aesthetic purposes. Case analysis: Maxillary and mandibular working models were received, showing an anterior reverse bite malocclusion, with an overjet of -3 mm and an overbite of 2 mm. The dentist requested a diagnostic wax-up of the maxillary anterior teeth to achieve optimal aesthetic results. Result: The master model was received, marked, occluded, and mounted on an articulator. Wax was then applied and shaped to refine the anatomy of tooth 21, with the point and line angles adjusted toward the center to create a smaller appearance while carefully considering the height and convexity. Wax restorations were made covering 6 anterior teeth from maxillary left canine to maxillary right canines with the occlusal relationships adjusted to approximate a normal appearance. Conclusion: The diagnostic wax-up procedure involves preparing the working models, establishing the median line, mounting the models on an articulator, and sequentially waxing teeth numbers 11 and 21 first, followed by teeth 12 and 22, and finally teeth 13 and 23. The overjet is increased to achieve a more normal maxillomandibular occlusion, followed by careful evaluation.

MAKING UV-BOX STERILIZER FOR PREVENTING COVID-19 WHEN REPAIRING DENTURES IN KEDIRI: PEMBUATAN STERILISATOR UV-BOX UNTUK PENCEGAHAN COVID-19 SAAT REPARASI GIGI TIRUAN DI KEDIRI Kusdarjanti, Endang; Setyowati, Okti; Nur Halimah, Anisa; Goenharto, Sianiwati; Inayati, Eny; Redjeki I, Sri; Sujati; Laksmi LR, Mia
Darmabakti Cendekia: Journal of Community Service and Engagements Vol. 6 No. 1 (2024): JUNE 2024
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20473/dc.V6.I1.2024.70-75

Background: Dental technicians are individuals with unique qualities who collaborate with dentists. The quality of information and abilities must be improved on a regular basis. However, because there is no additional education accessible for dental technicians, many find it difficult to refresh their knowledge and abilities on modern dental technology. Dental technicians who are members of the Indonesian Association of Dental Technicians (PTGI) in Kediri City have not yet fully understood the consequences of Covid 19 infection when working on the process of making and repairing dentures, therefore, it is very necessary to be given training on how to make a simple UV sterilizer. box that can kill the Covid-19 virus. Objective: This training aims to provide dental technicians who are members of partners with information on how to prevent Covid-19 and construct a basic sterilizer. Method: Counseling and workshops for dental technicians affiliated with the Indonesian Dental Technicians Association (PTGI) in Kediri City, including information on how to prevent Covid-19 and how to make a simple UV-Box sterilizer. Results: Based on the training participants' pre-test and post-test results, it is clear that the average (mean) post-test score (86,957) is greater than the average pre-test score (58,152). Conclusion: The findings of the pre-test and post-test calculations indicate that the training participants' knowledge enhanced after attending counseling and training.

TEKNIK PEMBUATAN FIXED FIXED BRIDGE PFM PADA KEHILANGAN GIGI 41, 31, DAN 32, PADA RESORPSI ALVEOLAR DAN RONGAK KECIL Alga Meisha Purwanto; Winda kusumawardani; Sri Redjeki Indiani; Sianiwati Goenharto; Anisa Nur Halimah; Narta Nikita Indiani; Widya Ulfa
Dentin Vol 9, No 3 (2025)
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/dentin.v9i3.17919

ABSTRACT Background: Tooth loss is often accompanied by alveolar bone resorption and reduced edentulous space, leading to changes in bone morphology and imbalance of the dental arch. Alveolar resorption refers to the reduction in bone volume and height in the area of missing teeth, while reduced edentulous space is defined as a narrower space than the ideal dimension for prosthetic replacement. One method to restore function and aesthetics in cases of tooth loss is the fabrication of a fixed-fixed bridgeusing Porcelain Fused to Metal (PFM). Objective: To describe the fabrication technique of a fixed-fixed PFM bridge for the replacement of missing teeth 41, 31, and 32 associated with alveolar bone resorption and reduced edentulous space. Case: The working model presented missing teeth 41, 31, and 32 accompanied by alveolar bone resorption and reduced edentulous space, for which a fixed-fixed PFM bridge was planned. Conclusion: The fabrication of a fixed-fixed Porcelain Fused to Metal bridge for the replacement of teeth 41, 31, and 32 with alveolar bone resorption and reduced edentulous space begins with receiving the working model, followed by wax-up of the coping to cover the resorbed area. The line angles are slightly shifted toward the proximal surfaces to create the visual impression of wider teeth. This is followed by metal coping finishing and subsequent application of slurry, opaque, dentin, enamel, translucent, and pink ceramic at the cervical pontic area. The process is completed with staining and glazing to enhance porcelain color and luster, and final polishing of the collar to achieve a smooth and esthetic result.Keywords : alveolar bone resorption, fixed-fixed bridge, narrow space, pink ceramic, porcelain fused to metal (PFM) ABSTRAK Latar Belakang: Kehilangan gigi sering disertai resorpsi tulang alveolar dan rongak kecil yang menyebabkan perubahan bentuk tulang dan ketidakseimbangan lengkung rahang. Resorpsi alveolar adalah penurunan volume dan tinggi tulang di area gigi yang hilang. Rongak kecil adalah jarak edentulous yang lebih sempit daripada ukuran ideal. Salah satu cara mengembalikan fungsi dan estetika pada gigi yang hilang adalah dengan pembuatan gigi tiruan jembatan fixed-fixed bridge dengan bahan Porcelain Fused to Metal (PFM). Tujuan: Untuk menjelaskan teknik pembuatan teknik pembuatan gigi tiruan jembatan PFM pada kehilangan gigi 41, 31, dan 32 yang disertai resorpsi alveolar dan rongak kecil. Kasus: Pada model kerja terdapat kehilangan gigi 41, 31, dan 32 disertai resorpsi tulang alveolar dan rongak kecil yang akan dibuatkan fixed-fixed bridge PFM. Kesimpulan: Tahapan pembuatan gigi tiruan jembatan fixed fixed bridge dengan bahan Porcelain Fused to Metal pada kehilangan gigi 41, 31, dan 32 yang mengalami resorpsi alveolar dan rongak kecil diawali dengan penerimaan model kerja, pembuatan wax-up coping menutupi area yang mengalami resorpsi dan line angle dibuat sedikit ke arah proksimal guna memberikan kesan gigi lebih lebar secara visual, finishing pada koping logam, kemudian dilanjutkan dengan pengaplikasian slurry, opaque, dentin, enamel, translucent, dan pink ceramic pada area servikal pontik. Setelah itu dilakukan proses staining dan glazing untuk menyempurnakan warna dan kilap porselen, lalu tahap akhir berupa pemolesan pada collar hingga diperoleh hasil yang halus dan estetis. Kata kunci : fixed-fixed bridge, pink ceramic, porcelain fused to metal (PFM), resorpsi tulang alveolar, rongak kecil

POTENSI HAZARD DI LABORATORIUM GIGI PADA PEMBUATAN PERANTI ORTODONTI LEPAS DAN REKOMENDASI PENGENDALIANNYA Sinkka Adekia Wulandandari; Winda kusumawardani; Sri Redjeki Indiani; Sianiwati Goenharto; Anisa Nur Halimah; Narta Nikita Indiani; Widya Ulfa
Dentin Vol 9, No 3 (2025)
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/dentin.v9i3.17920

ABSTRACT Background: Dental laboratories, as facilities for the fabrication of removable orthodontic appliances, present various occupational hazards, including mechanical, chemical, physical, and biological risks that may endanger dental technicians. The fabrication process involves the use of diverse materials and equipment, such as acrylic resin, metal wires, alcohol burners, and high-speed cutting machines, all of which may cause injuries or work-related health problems. Therefore, hazard identification and control measures are essential to minimize the risk of occupational accidents and adverse health effects. Objective: This study aims to identify potential hazards that may occur during the fabrication of removable orthodontic appliances in dental laboratories and to provide effective and practical control recommendations to ensure a safe and productive working environment. Case: In dental laboratory practice, work-related complaints and accidents frequently occur, including cuts from sharp instruments, skin irritation due to exposure to acrylic monomer, respiratory problems caused by acrylic dust, and discomfort resulting from noise and heat generated by machinery. In addition, non-ergonomic working postures contribute to back pain and fatigue, while biological contamination risks may arise from dental impressions or patient models that are not adequately sterilized. The development of hazard control posters can help reduce these occupational risks. Conclusion: Potential hazards in dental laboratories include mechanical, chemical, physical, and biological hazards, each of which may compromise technician safety. Specific control measures tailored to each type of hazard are necessary to prevent occupational accidents and to maintain a safe working environment.Keywords : dental laboratory, hazard, removable orthodontic appliances ABSTRAK Latar Belakang: Laboratorium gigi sebagai tempat untuk pembuatan peranti ortodonti lepas memiliki potensi bahaya seperti bahaya mekanis, kimia, fisik, dan biologi yang dapat menimbulkan risiko bahaya bagi teknisi gigi. Proses pembuatan peranti ortodonti ini melibatkan berbagai bahan dan peralatan, seperti resin akrilik, kawat logam, spiritus, serta mesin pemotong berkecepatan tinggi, yang semuanya berpotensi menimbulkan cedera maupun gangguan kesehatan kerja. Oleh karena itu, identifikasi bahaya serta upaya pengendalian menjadi langkah penting untuk meminimalkan risiko kecelakaan dan dampak negatif terhadap kesehatan pekerja. Tujuan: Penelitian ini bertujuan untuk mengidentifikasi potensi bahaya yang mungkin terjadi selama proses pembuatan perant ortodonti lepas di laboratorium gigi, serta memberikan rekomendasi pengendalian yang efektif dan aplikatif agar lingkungan kerja tetap aman dan produktif. Kasus: Dalam praktik di laboratorium gigi, sering terjadi keluhan dan kecelakaan kerja seperti luka gores akibat alat tajam, iritasi kulit karena paparan monomer akrilik, gangguan pernapasan akibat debu akrilik, serta rasa tidak nyaman karena kebisingan dan panas dari mesin. Selain itu, posisi kerja yang tidak ergonomis menyebabkan nyeri punggung dan kelelahan, sementara risiko kontaminasi biologis dapat muncul dari bahan cetak atau model pasien yang belum disterilkan dengan baik, pembuatan poster yang berisi tentang pengendalian bahaya dapat meminimalkan terjadinya risiko tersebut. Kesimpulan: Potensi bahaya di laboratorium gigi meliputi bahaya mekanis, kimia, fisik, dan biologi yang masing-masing dapat mengancam keselamatan teknisi. Diperlukan pengendalian spesifik sesuai jenis bahaya untuk mencegah kecelakaan kerja dan menjaga lingkungan kerja tetap aman. Kata kunci : hazard, laboratorium gigi, peranti ortodonti lepas

PENGGUNAAN ALAT PELINDUNG DIRI UNTUK KESELAMATAN DAN KESEHATAN KERJA LABORATORIUM TEKNIK GIGI PADA MESIN MIKROMOTOR Jovanka Yemima Putri; Winda kusumawardani; Sri Redjeki Indiani; Sianiwati Goenharto; Anisa Nur Halimah; Narta Nikita Indiani; Widya Ulfa
Dentin Vol 9, No 3 (2025)
Publisher : Universitas Lambung Mangkurat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.20527/dentin.v9i3.17922

ABSTRACT Background: The micromotor machine is one of the most frequently used tools in the fabrication of devices supporting oral and dental health. The increasing use of micromotor machines has led to a higher risk of occupational accidents. Various types of work-related accidents have been reported due to micromotor use, which hinders the achievement of Occupational Safety and Health (OSH) objectives, namely creating a safe, healthy, and comfortable working environment. Occupational accidents often result from insufficient knowledge and understanding of Personal Protective Equipment (PPE) during practical activities. This indicates that adequate understanding and compliance with PPE usage among students are essential measures for preventing workplace accidents. Objective: To identify the use of personal protective equipment as a means of occupational safety and health in dental technology laboratories during micromotor machine operation. Case: Work-related accidents associated with the use of micromotor machines in the production of dental and oral healthcare devices include hand injuries during the fitting of fixed and removable dental prostheses, hand contact with metal during metal coping fitting, exposure of the nose and face to dust during gypsum-based model fabrication, and hand injuries caused by sandpaper during the grinding of orthodontic appliances. Conclusion: The criteria for the use of personal protective equipment as a component of occupational safety and health in micromotor machine operation in dental technology laboratories can be categorized into several types of occupational accident risks, depending on the type of product being fabricated..Keywords : dental laboratory, micromotor machine, occupational safety and health, personal protective equipment, ABSTRAK Latar Belakang: Mesin mikromotor adalah salah satu alat yang paling sering digunakan dalam pembuatan alat-alat yang menunjang kesehatan gigi dan mulut. Meningkatnya pemakaian mesin mikromotor, membuat risiko terjadinya kecelakaan kerja juga makin meningkat. Terdapat berbagai macam kejadian kecelakaan kerja akibat pemakaian mesin mikromotor. Hal ini membuat tidak tercapainya tujuan Keselamatan dan Kesehatan Kerja (K3) adalah mewujudkan lingkungan kerja yang aman, sehat, sejahtera sehingga akan tercapai suasana lingkungan kerja yang aman, sehat dan nyaman. Terjadinya kecelakaan kerja bersumber dari kurangnya pengetahuan dan pemahaman tentang Alat Pelindung Diri (APD) saat praktikum. Hal ini menunjukkan bahwa pemahaman serta ketaatan mahasiswa dalam penggunaan Alat Pelindung Diri (APD) adalah satu cara untuk mencegah terjadinya kecelakaan kerja. Tujuan: Mengetahui penggunaan alat pelindung diri sebagai media keselamatan dan kesehatan kerja di laboratorium teknik gigi saat pemakaian mesin mikromotor. Kasus: Kecelakaan kerja yang terjadi akibat penggunaan mesin mikromotor dalam pembuatan berbagai produk di dunia kesehatan gigi dan mulut., seperti tangan yang dapat terluka akibat melakukan fitting gigi tiruan cekat dan gigi tiruan lepasan, lalu tangan yang dapat terkena oleh logam saat fitting koping logam, hidung serta muka yang dapat terkena debu saat pembuatan model berbahan dasar gipsum, dan tangan yang terluka akibat terkena amplas saat penggrindingan peranti ortodonti. Kesimpulan: Kriteria penggunaan Alat Pelindung Diri sebagai media Keselamatan dan Kesehatan Kerja dalam penggunaan mesin mikromotor di laboratorium teknik gigi, dapat di kategorikan dalam beberapa jenis risiko kecelakaan kerja tergantung dari produk yang dihasilkan. Kata kunci : alat pelindung gigi, keselamatan dan kesehatan kerja, laboratorium teknik gigi, mesin mikromotor

Title

Found 10 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 10 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 10 Documents
Search