Claim Missing Document
Check
Articles

Found 25 Documents
Search

Perancangan Dan Pembuatan Alat Pengering Cengkeh Berbahan Bakar Biomassa Latif, Lita Asyriati; Tjiroso, Bambang
Patria Artha Technological Journal Vol 4, No 2 (2020): Patria Artha Technological Journal
Publisher : Department of Electrical Engineering, University of Patria Artha

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33857/patj.v4i2.357

Abstract

Cloves are one of the leading agricultural commodities in North Maluku. The main product of the clove plant is clove flower. The clove flowers used in the production of kretek are dried cloves. Drying clove flowers can be done in two ways, first traditionally by drying them in the hot sun directly, and second by using an artificial dryer. Drying by drying directly in the sun or traditionally has several weaknesses, namely dependence on the weather, causing damage to clove flowers due to too long drying and the need for a large area for drying. The purpose of this research is to design and manufacture a clove dryer equipped with a biomass furnace as a heat source. The research method that will be carried out in this research is experimental research, by designing and building a clove dryer equipped with a biomass furnace as a heat source. The result is a clove dryer with dimensions of 120 cm long, 80 cm wide and 80 cm high. clove dryer equipped with 3 shelves with a distance of 20 cm between the racks. The clove dryer test results show that the time required to dry 18 kg of wet cloves is 13 hours with temperatures in the drying room 49 ℃ to 55 ℃.
Design Portable Solar Panel Dan Pengujian Kapasitas Listrik Yang Diterima Terhadap Kemiringan Dan Arah Rotasi Matahari Karim, Rahmat Abdul; Rais, Sandi; Tjiroso, Bambang
Patria Artha Technological Journal Vol 6, No 1 (2022): Patria Artha Technological Journal
Publisher : Department of Electrical Engineering, University of Patria Artha

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33857/patj.v6i1.522

Abstract

This research aims to create a polycrystalline type solar panel design with a capacity of 100 Wp which is portable (foldable and easy to carry everywhere) and can rotate following the direction of the sun. Solar panels designed are made of Hollow Cm Iron, 1.2 mm Plate Iron, 1.2 mm-2 Inch Stainless Pipe where for solar panel support poles designed with a model can be folded and can rotate 360 degrees so that it can follow the direction of sunlight radiation. The support pole can also be slid up and down where there are 2 scrups that can withstand the shift up and down the support pole.As for the solar panel holder, the design is made by installing hinges and bolts so that the solar panels can be folded and can be tilted following the direction of the sun's rotation. The results of the three-day test in a row from 09-00 to 16-00 WIT, the highest electrical capacity generated by solar panels is between 11:00 – 14:00 WIT on average —an average of 20 V with a solar controller charger output voltage of 19.9 V. The angle of inclination of the solar panel and the direction of the sun rotates following the direction of the sun's rotation
Penerapan Alat Pengasapan Ikan Tipe Kabinet Untuk Meningkatkan Produksi Ikan Asap Di Industri Rumah Tangga Kecamatan Weda Halmahera Tengah Bambang Tjiroso; Said Hi Abbas
Jurnal Pengabdian UntukMu NegeRI Vol 4 No 2 (2020): Pengabdian Untuk Mu negeRI
Publisher : LPPM UMRI

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37859/jpumri.v4i2.2210

Abstract

Smoked fish is a fish processing product that is very popular with consumers in Indonesia. Smoked fish production in Indonesia, especially in Weda District, Central Halmahera District, still has various problems in the production process because the tools used in daily smoked fish production are still conventional. PKM activity partner is one of the smoked fish home industries located in Weda District, Central Halmahera. Conventional smoking tools are only made of wood and racks made of bamboo and are still open so that the efficiency of smoke for smoking fish is less than optimal. Therefore, through PKM Kubermas, it will be carried out to replace conventional fish smoking equipment owned by partners with cabinet-type smoking equipment to increase production yields. The service implementation process is divided into 7 stages, namely the preparation stage, socialization, making tools, socializing the use of tools, mentoring and evaluation. The results achieved are the dimensions of the smoked fish equipment made with dimensions of length 120 cm, width 80 cm and height 200 cm, while the time required for smoked fish production is more efficient, namely 2 to 3 hours in one production. It uses less fuel at one time because the smoker is closed.
Pelatihan Pembuatan Kemasan Produk-Produk Rumahan Bagi Masyarakat Di Desa Toniku Mukhlis Muslimin; Lita Asyriati Latif; Bambang Tjiroso; Sandi Rais
To Maega : Jurnal Pengabdian Masyarakat Vol 5, No 1 (2022): Februari 2022
Publisher : Universitas Andi Djemma

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35914/tomaega.v5i1.964

Abstract

Tujuan pengabdian ini sebagai bentuk pemberdayaan Masyarakat desa dan  kepedulian terhadap nelayan dalam meningkatkan ekonomi mereka, dimana metode yang dilakukan dengan pelatihan pengolahan ikan, pembuatan kemasan, desain, dan proses produksi ikan dalam kemasan  bagi masyarkat di desa toniku. Adapun hasil pengabdian telah terlaksana proses pelatihan pada indistri rumahan “SARINA”, pemberian bantuan kemasan dengan merek “Ikan Teri Khas Tonuki, Sarina Toniku” dan proses pengemasan telah di laksanakan sehingga produk ikan teri kemasan siap untuk di pasarkan.
PENGARUH KOMPOSISI KIMIA DAN KECEPATAN KEMIRINGAN CETAKAN TILT CASTING TERHADAP STUKTUR MIKRO PADUAN Al-Si-Cu Bambang Tjiroso; Suyitno Suyitno; Bahtiar Bahtiar
Prosiding SNST Fakultas Teknik Vol 1, No 1 (2015): PROSIDING SEMINAR NASIONAL SAINS DAN TEKNOLOGI 6 2015
Publisher : Prosiding SNST Fakultas Teknik

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Penelitian ini bertujuan untuk mengetahui pengaruh komposisi kimia dan kecepatan kemiringan cetakan tilt casting terhadap struktur mikro paduan Al-Si-Cu. Temperatur tuang yang digunakan 710 °C dan temperatur cetakan 220 °C. Paduan dilebur  dalam dapur krusibel untuk memperoleh empat variasi komposisi paduan Al-Si-Cu. Logam cair dipindahkan dari furnace ke wadah tuang yang menempel pada cetakan dengan posisi horisontal. Cetakan dimiringkan sampai posisi vertikal untuk menuang logam cair masuk kedalam cetakan dengan variasi kecepatan kemiringan cetakan 9, 12, dan 15 °/detik. Logam cair didiamkan sampai membeku. Hasil pengujian komposisi kimia diperoleh empat variasi paduan yaitu 1,17% Cu, 1,65% Cu, 2,14% Cu, dan 2,76% Cu. Pengamatan struktur mikro dilakukan pada keseluruan produk cor dengan kecepatan kemiringan cetakan 9, 12,dan 15°/ detik. Penumpukan segregasi paduan silikon terlihat dengan warna kehitam-hitaman. Struktur terdiri dari matriks Al (putih), jaringan interdendritik silikon eutektik (abu-abu gelap,tajam), Cu;Mg-Si-Al (abu-abu terang), dan Fe;Si-Al (abu-abu sedang). Kata kunci: komposisi kimia, struktur mikro, tilt casting
Penyediaan Alat Pencuci Tangan (Wastafel) Otomatis Untuk Pencegahan Penyebaran Covid 19 Di Rumah Sakit Chasan Bosoeri Ternate Iis Hamsir Ayub Wahab; Muhammad Yunus H Abbas; Bambang Tjiroso
Journal Of Khairun Community Services Vol 1, No 1 (2021): Journal Of Khairun Community Services
Publisher : Universitas Khairun

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33387/jkc.v1i1.3128

Abstract

Washing hands is a simple thing, but has a very important role in everyday life. The sink system is designed to meet these needs. The sink system consists of a water faucet, and soap. The sink system has begun to be widely used in homes, schools, campuses, offices, industry and other places. This service aims to design and make automatic hand washing wasaffles so that it is hoped that it can make hand washing activities easier and more practical. Users no longer need to turn the water tap and pick up soap, just by placing their hands in a certain position, the water and liquid soap will come out automatically. The results of the implementation of the activities are the process of assembly, installation and delivery. The PKM team also conducted socialization on the use of tools to users, namely the Chasan Bosoeri Ternate Hospital. Reporting and publication is carried out after each stage has been completed. The published articles are published in the LPPM journal, Khairun University.
Penggunaan lemari pengasapan ikan untuk meningkatkan produksi pada industri rumah tangga di Kabupaten Pulau Morotai Bambang Tjiroso; Rinto M. Nur; Ariestha W. Bustan
DEDIKASI Vol 22, No 1 (2020): Jurnal Dedikasi
Publisher : Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26858/dedikasi.v22i1.13822

Abstract

One processed fish product that is favored by many people on Morotai Island is smoked fish. Although much popular, the smoked fish home industry on Morotai Island does not routinely produce smoked fish every day. Smoked fish processing still uses conventional equipments. The equipment which is open makes it difficult for partners to maximize the use of combustion fumes to smoked fish. Much smoke is wasted causing the use of fuel waste and smoking time becomes longer around 4 to 8 hours, so that in one day the partners only do one smoking process. Besides that, with the condition of smoking equipment that is open in the event of strong winds or heavy rain the partner cannot carry out the process of smoked fish. The purpose of this community service activities is to replace conventional (open) fish smoking equipment with modern cabinet / cabinet type smoking equipment to increase smoked fish production. The steps taken are the manufacture of smoking equipment, initial testing in order to maximize the use of fuel and temperature in the smoking cabinet. The next step is testing the estimated time of smoking fish and the capacity of fish in a single production. After the testing phase is completed, it is continued with the socialization stage for the manufacture and operation of the fish fume cupboard tool to partners as well as the production process assistance. The results of the service show that the amount of fuel needed is less. In addition, the time needed in one production is faster (2-3 hours) and partners can produce smoked fish every day.
VIDEO EDUKASI PENCEGAHAN PENYEBARAN VIRUS CORONA DI PROVINSI MALUKU UTARA Lita Asyriati Latif; Sandi Rais; Bambang Tjiroso
JURNAL PengaMAS Vol 3, No 2 (2020)
Publisher : UNIVERSITAS KHAIRUN

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33387/pengamas.v3i2.1915

Abstract

Pembuatan video edukasi pencegahan penyebaran virus corona ini bertujuan untuk memberikan informasi yang benar kepada masyarakat dan pengetahuan tentang pencegahan penyebaran virus corona mulai dari penggunaan masker, mencuci tangan, pembatasan sosial, jarak aman penularan virus corona, menjaga imunitas agar kebal terhadapa virus corona dan bagaimana peran mahasiswa untuk memberikan penyuluhan kepada masyarakat tentang cara-cara pencegahan penyebaran virus corona tersebut di atas. Pembuatan video ini dilakukan dalam beberapa tahapan antara lain; Pembuatan Skrip Video yang merupakan alur cerita dari sebuah film dengan beberapa tahapan pengambilan video serta artis-artis pendukung pada video ini. Video edukasi COVID 19 dibuat dengan durasi 6,28 menit dengan melibatkan 8 orang artis pendukung yaitu 7 orang mahasiswa dan 1 orang Dosen yang diwaliki oleh Pembantu Dekan III Fakultas Teknik. Video ini diambil dengan menggunakan digital camera dan drone. Editing video menggunakan software Adobe Premiere Pro 2020 v.14.5 yang memiliki banyak smart tool dan dapat direkam dalam format apapun termasuk 8K dan virtual reality. Publishing video dilakukan melalui beberapa media sosial antara lain YouTube, Facebook, Instagram dan WhatsApp, 111 view dan 15 like didapatkan semenjak di publish pada 29 Mei 2020 di media YouTube serta tanggapan positif dan video share oleh beberapa mahasiswa dan dosen setelah dipublish di halaman Facebook Fakultas Teknik dan Instagram.Kata Kunci: Covid-19, Video Edukasi, Penyuluhan, Media sosial, Maluku Utara.
Save Our Beach: Kawasan Wisata Pulau Galo-Galo, Kecamatan Morotai Selatan, Kabupaten Pulau Morotai Rinto M. Nur; Asy’ari Asy’ari; Bambang Tjiroso; Ardin Umar; Arisetiawan Arisetiawan
Journal Of Khairun Community Services Vol 2, No 1 (2022): Journal Of Khairun Community Services
Publisher : Universitas Khairun

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33387/jkc.v2i1.4461

Abstract

Morotai merupakan salah satu wilayah strategis, terutama dalam pengembangan pariwisata berbasis pantai. Beberapa icon wisata pantai yang dimiliki Morotai diantaranya Pulau Dodola, Pulau Kolorai, Pulau Kokoya, Pulau Zum-zum, Pantai Nunuhu, Tanjung Gorango, Tanjung Dehe Gila, Pantai Batu Lobang, dan beberapa tempat lainnya. Namun tidak kalah menariknya adalah pantai yang berada di Pulau Galo-Galo. Pulau Galo-galo merupakan kawasan pantai yang sangat potensial tapi masih belum terkelola dengan baik. Kawasan pantai ini memiliki daya tarik karena merupakan pulau kecil yang dikelilingi pasir putih dengan air laut yang hijau kebiruan. Namun, masalah kebersihan pantai menjadi problem utama yang membuat pantai ini memiliki selling point yang lemah. Tujuan kegiatan ini dapat menanamkan pemahaman masyarakat sejak dini dan sebagai pemacu semangat masyarakat Galo-Galo agar dapat menerapkan pola hidup bersih dan menciptakan pantai yang bersih dan indah sebagai kawasan wisata bahari. Kegiatan ini diharapkan dapat menumbuhkan kesadaran masyarakat sejak dini tentang pentingnya menjaga kebersihan lingkungan terutama pantai yang dijadikan sebagai kawasan wisata dengan cara pemberian pemahaman kepada siswa SD, MTs dan masyarakat umum di Desa Galo-Galo. Selain itu, tim pengabdian beserta masyarakat Desa Galo-Galo turun ke lapangan, bersama-sama membersihkan pantai untuk menciptakan pantai yang bersih dan indah
Pengujian Portable Solar Cell Kapasitas 100 WP Sebagai Energi Listrik Penggerak Blower Pengering Cengkeh 250 Watt Sandi Rais; Bambang Bambang; Kifli Umar; Witono Hardi; Ari Setia Pratama
Patria Artha Technological Journal Vol 6, No 2 (2022): Patria Artha Technological Journal
Publisher : Department of Electrical Engineering, University of Patria Artha

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33857/patj.v6i2.650

Abstract

Penelitian ini bertujuan melakukan pengujian portable solar panel dengan sudut kemiringan hasil rancangan yang dilakukan oleh peneliti terdahulu. Penelitian dilakukan dalam beberapa tahapan antara lain, pengukuran kapasitas arus yang di hasilkan oleh dua buah solar cell kapasitas 50wp dengan aki dan tanpa aki, perhitungan waktu pengisian batrei, dan pengukuran kapasitas listrik yang dihasilkan dengan pembebanan blower 350 Watt. Dari hasil pengujian penggunaan beban pada malam hari yaitu mendapatkan rata-rata 11,86 V sampai dengan 12 V per jam dan pengambilan data setiap 5 menit sekali.  Pengujian dilakukan selama 2 Jam dan kondisi baterai pada saat pengujian adalah sebesar 60 %. Selama 2 Jam pengujian baterai mengalami penurunan kapasitas listrik sebesar 20 % maka dapat diasumsikan bawha jika baterai terisi penuh blower dapat dioperasikan selama 10 Jam. Voltase yang terbaca pada saat pengujian stabil di angka 11,9 volt. Dengan demikian maka pengujian pembebanan dengan blower 250-watt dapat dikatakan stabil.  Untuk pengujian solar panel pada siang hari dengan menggunakan Baterai terlihat bahwa voltase yang dihasilkan mengalami penurunan jika dibandingkan dengan pengujian pada malam hari yang hanya menggunakan baterai. Hal ini disebabkan karna system pada solar panel yang dilakukan pengujian pada siang hari bekerja secara keseluruhan dibandingkan dengan pada malam hari yang hanya mengunakan baterai. Untuk Pengujian solar panel dengan beban blower 250-watt tanpa Baterai pada siang hari rata-rata volatse yang dihasilkan adalah sebesar 11,87 V sampai dengan 12,57 per jam dan pengambilan data setiap 5 menit sekali. Dari hasil pengujian terlihat bahwa voltase yang dihasilkan terlihat lebih besar atau lebih tinggi jika dibandingkan apabila menggunakan seluruh komponen solar panel yaitu dengan menyambungkan baterai. Meskipun blower dapat bekerja dengan kondisi pengoperasian seperti ini, namun pengujian ini harus dilakukan dengan kondisi cuaca cerah dimana pada kondisi cuaca cerah, solar panel akan bekerja dengan baik dan tidak mengalami penuruan kapasitas listrik yang masuk.