Claim Missing Document
Check
Articles

Found 39 Documents
Search

Pengaruh Penambahan Fly Ash dan Serbuk Kaca Terhadap Sifat Fisik dan Mekanik Komposit Batako Husain, La Ode; Endriatno, Nanang; Aminur, Aminur
Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin Vol 5, No 4 (2020): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin
Publisher : Teknik Mesin Universitas Halu Oleo

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (300.125 KB) | DOI: 10.55679/enthalpy.v5i4.15779

Abstract

Composite  is  a  new  material  engineered  by  two  or  more  materials  where  the properties of the materials differ from one another both in chemical and physical properties. Composites are obtained from a combination of metal with ceramics, metal with plastics,  and others. The purpose of this study was to determine the effect of adding fly ash and glass powder on the physical and mechanical properties of  brick-based  composites.  The  drying  process  is  carried  out  for  28  days.  The compressive strength and water absorption tests were carried out after the drying process.  The  results showed  the  highest  compressive strength  value  is  on  the  B sample  is  74.17  kg  /  cm2  and  water  uptake  is  lowest  in  the  sample  A,  namely 10.53%. The highest compressive strength test results exist in the sample B is 74.17 kg / cm2 and the compressive strength is lowest in the sample A which is 66.67 kg / cm2. While the highest water absorption test results were in sample C, namely 15.05% and the lowest water absorption value was in sample A, namely 10.53%. Keywords:  Brick-Based,  fly  ash,  glass  powder,  compressive  strength,  water absorption. 
Pengaruh Sudut Elektroda Terhadap Sifat Mekanik dan Fisis Baja Karbon Rendah Hasil Proses Pengelasan SMAW Darmawan, Darmawan; Endriatno, Nanang; Aksar, Prinob
Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin Vol 7, No 4 (2022): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin
Publisher : Teknik Mesin Universitas Halu Oleo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55679/enthalpy.v7i4.28333

Abstract

Analysis of the effect of welding position and electrode movement pattern on hardness,it can be concluded that the electrode movement pattern has an influence on the hardness result. The purpose of this study was to determine the effect of the electrode angle on the mechanical and physical properties of low carbon steel from the SMAW welding process. The research method used is hardness testing and microstructure analysis. The results obtained are that specimens with different electrode angles, namely 300, 450, and 600 produce an average in each welding area such as the weld area, haz area, and different areas where the greater the angle the higher Also the average for each weld area and also on the analysis of microstructure shows that the weld metal area with electrode angles of 300, 450, and 600 shows the same microstructure or does not show any effect. the larger the area of the weld metal with electrode anglesof 300, 450, and 600, the larger the ferrite area, the larger the area of the weld metal with angles of 300, 450, and 600 pearlite grains.Keywords: electrode angle, low carbon steel, microstructure, welding
Analisa Getaran Pada Balok Jepit Bebas dan Jepit-Jepit dengan Variasi Posisi Motor Penggetar Faisal, Muhammad; Endriatno, Nanang; Sudia, Budiman
Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin Vol 6, No 2 (2021): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin
Publisher : Teknik Mesin Universitas Halu Oleo

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (369.32 KB) | DOI: 10.55679/enthalpy.v6i2.19131

Abstract

This study aims to determine the difference in vibration produced when the position of the vibration source is placed in a different position on the cantilever beam which is supported by fixed-fixed and free-fixed supports. This research used 6061 series aluminum beam with a size of 32 mm x 32 mm x 600 mm. Variations the placement of the exciter of fixed-fixed beams was in the 15 cm, 30 cm, and 45 cm positions, while the fixed-free beams was in the 10 cm, 20 cm, 30 cm, 40 cm, and 50 cm positions. The results of the research on fixed-fixed beams showed that the maximum displacement value was at a position of 30 cm with a value of 0.097 mm, the minimum displacement at 45 cm with a value of 0.04 mm. The maximum velocity value was at a position of 15 cm with a value of 0.653 cm/s, the minimum velocity was at a position of 45 cm with a value of 0.397 cm/s. The maximum acceleration value was at a position of 15 cm with a value of 12.16 m/s², the minimum acceleration was at a position of 45 cm with a value of 8.33 m/s². While the fixed-free beam showed that the maximum displacement value was at a position of 50 cm with a value of 0.197 mm, the minimum displacement at a position of 10 cm with a value of 0.097 mm. The maximum velocity value was at a position of 30 cm with a value of 1.138 cm/s, the minimum velocity at a position of 10 cm with a value of 0.670 cm/s. The maximum acceleration value was at a position of 30 cm with a value of 21,833 m/s², the minimum acceleration was at a position of 10 cm with a value of 9.95 m/s².Keywords: vibration, displacement, velocity, acceleration, aluminum
Analisis Kekuatan Rangka Mesin Pencacah Nilam dengan Menggunakan Metode Elemen Hingga Nanang Endriatno; La Ode Ahmad Barata; Salimin
Piston: Jurnal Teknologi Vol 9 No 2 (2024): Desember 2024
Publisher : Program Pendidikan Vokasi Teknik Mesin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55679/pistonjt.v9i2.74

Abstract

Frames are often used as essential elements in the construction of machines and various other engineering products. The strength of the frame is significant in ensuring that the structure can withstand operational loads when used. Frame failure can cause severe damage, accidents, and substantial financial losses, so evaluating the strength of the frame before production is a critical step in the design process. This study aims to analyze the mechanical behavior of the components or frames of the patchouli chopping machine based on the maximum stress, displacement, and safety factor of the designed frame. The research method using finite element simulation technology is an efficient approach to analyzing the performance of frame structures. By utilizing simulations, a comprehensive evaluation of various parameters such as stress, displacement, and frame safety can be carried out. This process helps predict the structure's response to multiple loads received by the system. The simulation results using the finite element method show that the L-profile frame 40x40x3 mm with a cross-sectional area of ​​307.863 mm2 can withstand a maximum load of 1000 N with a maximum deformation of 0.2479 mm, which occurs at the load center. The von Mises stress distribution shows that the stress that occurs in the L-profile steel is 28.8 MPa. This value is far below the material yield strength threshold of 207 MPa. The maximum Safety Factor value that occurs in the frame is 15 ul, and there is no safety factor value below 1. The simulation results show that the analyzed frame is safe and meets the specified design requirements
RANCANG BANGUN BODI MOBIL LISTRIK MENGGUNAKAN FIBERGLASS Zakaria Ramadhan; Bayu Saputra; Yasin; Yogi Prasetia; Sudarsono; Nanang Endriatno
Piston: Jurnal Teknologi Vol 10 No 1 (2025): June 2025
Publisher : Program Pendidikan Vokasi Teknik Mesin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55679/pistonjt.v10i1.84

Abstract

Electric cars are cars that are driven by electric motors and use electrical energy stored in batteries. The use of electric cars certainly requires a vehicle design that can meet automotive needs that are more focused on the chassis and body. The performance of electric cars is influenced by the weight and aerodynamics of the car itself, one of which is the body of the electric car, to produce good performance, a design that has a low drag coefficient value is needed so that it can cut through the wind well and make this electric car go fast. The material used to make this electric car body is fiberglass with a hand lay up application technique. In making it, several preparations are needed, namely making designs, making moulds, and making bodies using fiberglass media. The results of the study indicate that for the specifications of the car body design results, namely the body height of 60 cm, body width of 82 cm, body length of 2.73 m, upper body width of 63 cm, inner body width of 50 cm, front body height of 37 cm, body glass length of 101 cm, glass width of 63 cm, rear glass height of 44.5 cm, front glass height of 10.5 cm with a body weight of 19.25 kg and a glass weight of 2.15 kg. The conclusion of this study is that the prototype body of the electric car can be attached to the frame properly after the car is used or driven and the prototype body. Electric cars are made of fiberglass, this material is very appropriate because it has a light character, easy to shape. But for performance in electric cars, body weight greatly affects the speed of electric cars so it is hoped that further research will be developed with a lighter form of electric car body.
Desain Mesin Pemisah Kulit Kacang Tanah Menggunakan Sistem Transmisi Ganda Nanang Endriatno
Piston: Jurnal Teknologi Vol 10 No 1 (2025): June 2025
Publisher : Program Pendidikan Vokasi Teknik Mesin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55679/pistonjt.v10i1.111

Abstract

Post-harvest processing of peanuts requires an efficient outer skin peeling process to speed up the production process. Manual peeling is still common among farmers and small business actors, but this method is considered less efficient in terms of time and energy. Therefore, this study aims to develop a peanut peeling machine using a double belt transmission mechanism to improve work efficiency and peeling results. The machine development method includes designing and mechanism design. The machine is designed with a steel angle frame measuring 800 mm high × 500 mm long × 500 mm wide, using a peeling roller with a diameter of 267 mm and a length of 450 mm consisting of four spoons. The roller functions to scrape the peanut skin through a pressing system, while the sieve keeps the seeds and skins still during pressing. The mixture of peanut skin and seeds that have been separated will fall together through the sieve. Then it passes through the blower and separation occurs. This machine is driven by a 5.5 HP electric motor with a maximum rotation of 1400 rpm. The transmission system uses two belts and pulleys: a 100 mm input pulley and a 250 mm output pulley produce a roller rotation of 560 rpm, while the blower is driven by a 100 mm input and output pulley at 1400 rpm. This machine has the potential to be a practical mechanical solution to increase the efficiency of peeling results on a small industrial scale. Further development is needed to build a physical prototype of the machine and evaluate its performance and efficiency.
Rekayasa Material Serat Alternatif Melalui Desain Mesin Pengurai Sabut Kelapa Nanang Endriatno
Piston: Jurnal Teknologi Vol 10 No 2 (2025): Desember 2025
Publisher : Program Pendidikan Vokasi Teknik Mesin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55679/pistonjt.v10i2.126

Abstract

Coconut fiber is a byproduct of the coconut industry that is abundant and has not been utilized optimally. Coconut fiber has good mechanical properties, is environmentally friendly, and has the potential to be used as an alternative fiber material. This study aims to design a coconut fiber decomposing machine that is capable of producing alternative fiber materials. The research methods include literature study, machine mechanism design, and machine design. The machine is designed with a 30x30x3 mm angle profile steel frame measuring 700x500x400 mm in height x length x width, using a decomposing cylinder with a diameter of 164 mm and a length of 355 mm. The decomposing cylinder functions to decompose coconut fiber into fiber. Another main component is the coconut fiber holder plate that functions to clamp the coconut fiber to keep it in position during machine operation. The coconut fiber will be held in the coconut fiber holder, while the other part will fall through the outlet channel. This machine is driven by a 5.5 HP electric motor with a maximum rotation of 1400 rpm. The transmission system uses a belt and pulleys, with a 70 mm input pulley and a 200 mm output pulley, producing a maximum rotation speed of 490 rpm. The design is expected to make a machine capable of increasing the added value of coconut fiber waste and supporting the development of alternative fibers based on natural fibers.
Comparative Mechanical and Thermal Properties of Epoxy Matrix Composite Reinforced with Coco Peat and Coconut Shell Charcoal Fillers for Automotive Brake Friction Applications Al Ichlas Imran; Nanang Endriatno; Januar Parlaungan Siregar; Mohd Ruzaimi Mat Rejab; Sambodo Arif Wibowo; Tezara Cionita; Deni Fajar Fitriyana
Automotive Experiences Vol. 8 No. 3 (2025)
Publisher : Universitas Muhammadiyah Magelang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31603/ae.14131

Abstract

Developing epoxy-based composites reinforced with natural materials has become a significant concern in supporting friction materials and sustainable automotive industries. Coco peat and coco shell charcoal are coconut wastes that have the potential as natural fillers to support the mechanical properties of friction material composites while supporting the reduction of biomass waste. This study aims to evaluate the effect of weight fraction variation of coco peat and coco shell charcoal on composite mechanical and thermal properties. Specimens were prepared using the hand lay-up method with 5%, 10%, and 15% filler weight fractions. Mechanical tests were conducted, including tensile test, bending test, Rockwell hardness, and Charpy impact. Results show that the addition of 5% coco peat increased the tensile strength to 28.36 MPa and impact strength to 123.33 J/m², while coco shell charcoal at 10% recorded the highest flexural strength of 36.10 MPa and hardness of 93.66 HRB. However, increasing the filler concentration caused a decrease in tensile and impact strength due to the formation of voids, agglomeration, and micro-cracks. These findings confirm that coco peat is effective for tensile and impact strengthening at low fractions. In contrast, coco shell charcoal improves flexural strength and produces higher hardness values than the commercial brake pad product (59.59-66.90 HRB). Furthermore, the composite with 5% coco shell charcoal showed good thermal stability with a final residue value of 3.83%. Further studies can focus on surface modification of fillers, hybrid composites, and evaluation of tribological properties and the environment to promote applications in the automotive industry sector.
Optimalisasi Alat Press Hidrolik Untuk Fabrikasi Material Komposit Nanang Endriatno
Piston: Jurnal Teknologi Vol 11 No 1 (2026): Juni 2026
Publisher : Program Pendidikan Vokasi Teknik Mesin

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55679/pistonjt.v11i1.141

Abstract

production equipment capable of producing high-quality products, particularly for composite materials. This research aims to develop a hydraulic press for fabricating composite materials. This tool is designed to generate high compressive forces with minimal manual input, making it suitable for use on a laboratory scale and in small industries. The research methods include a literature review, conceptual design of the mechanism, design using Autodesk Inventor, and structural simulation using a numerical approach. The tool design consists of the following main components: a frame, a steel plate mold, a hydraulic jack mount, a jack retaining frame, springs, spring bolts, a hydraulic jack, a press, a mold cover, and mold retaining bolts. All components have been modeled in three dimensions (3D) and two dimensions (2D) using Autodesk Inventor software to ensure dimensional accuracy and ease of assembly. The simulation results indicate that the maximum stress in the frame remains below the material's yield point. The deformations were relatively small and did not significantly affect the tool's performance. Furthermore, the safety factor obtained was greater than one, indicating that the frame structure had a good level of safety, adequate rigidity, and was capable of withstanding the load during the pressing process. The designed hydraulic press can be optimally utilized for composite fabrication processes. The development focused not only on structural strength and safety but also on improving work process efficiency, ease of operation, and ease of maintenance, making this tool suitable for both laboratory and small-scale industrial applications.