Claim Missing Document
Check
Articles

Found 34 Documents
Search

Studi Efisiensi dan Konservasi Energi Pada Interior Gedung P Universitas Kristen Petra Yusita Kusumarini, Stephen Sugiarto Prasetyo
Intra Vol 4, No 1 (2016): Desain Interior 2015/ 2016
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (78.005 KB)

Abstract

This study is accomplished to reveal the efforts of efficiency and energy conservation in East Campus/P Building of Petra Christian University. Energy crisis is the background of this study. The high energy demand in Indonesia is not compensated by enough energy supplies. Furthermore, nearly all of energy supplies in Indonesia is produced from non-renewable resources.One of the high-rise buildings that is fitting to be studied is the East Campus/P Building of Petra Christian University. Energy efficient innovations were applied to the building to reduce the buildings energy consumption. The efforts done in P Building needs to be studied and published for public references, also for the improvement of both architecture and interior design specially in high-rise building. This will contribute largely to the efforts of saving the environment and energy saving.The study is done by collecting field data, then it is analyzed using GREENSHIP standards for interior published by Green Building Council Indonesia (GBCI). The result is shown in points and percentage (%) for category of Energy Efficiency and Conservation (EEC). Then, using the result from analysis, conclusion and recommendations can be formulated for future development of energy efficiency in P Building.
Perancangan Compact Booth untuk Produk Pakaian dan Aksesoris Pada Indoor Market Wijaya, Felicia; Kusumarini, Yusita; Rizqy, M. Taufan
Intra Vol 4, No 2 (2016): Desain Interior 2015/2016
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1514.621 KB)

Abstract

Fashion and accessories is the type of industry which is a prime mover in the development of national creative industrywith various diversity type. It’s shown with various types of exhibition eventes such as bazaar market.Therefore needed booth which accommodate the function of the display and the module settings for any products and practical system that can provide easy installation and mobilization module setings. The design method using the methods of David Kelley with the following stages discovery, interpretation, ideation, experimentation, dan evolution. Compact design booth is an innovation display system for interior of exhibition space. The advantages of this design is a flexible display system with various conditions on the showroom as product type, the size of the stand and the diversity of the settings for the display module forms. In addition to the use of colors and finishes can be customized with the branding companies so that they can show and supports up a brand.
Perancangan Fasilitas Tunggu dan Advertising di Pusat Perbelanjaan Mall Santoso, Joshua Alim; Kusumarini, Yusita; suprobo, filipus priyo
Intra Vol 4, No 2 (2016): Desain Interior 2015/2016
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1561.783 KB)

Abstract

Shopping center mall which is known as a place that containts all kinds of products to market and received by the visitors as a place to buy needs and recreation. The visitors often come just to accompany their partners without any other intentions. When they feel tired and bored but their partner is still walking around, they will wait. This design is intended to find two needs from the visitors who waits and the shopping center mall’s administrator. The initial observation which was done is intended to gain the data of needs, habit, and characters of the visitors in the situation that make them waits. Observation is also done to gain data from the availability of waiting area in the shopping center mall, which is bench. The results of the observation becomes the reference of some case studies which are announced to the public to know the habits of the users in choosing sitting position which has been prepared by the mall’s developer. Besides that, the mall’s developer have other needs and main purpose which is money oriented profits. So in this design, with adding commercial elements as the main point in this waiting activity, whereas even if the visitors are just waiting, they can optimally interact. The result of the thinking process to combine both needs, advertising, information center, also online shopping facility become something that is a huge advantage for the mall and also become one of the waiting facility for the visitors to spend their time.
Eksperimen Material untuk Mebel dari Limbah Kertas Koran Amelia, Tracy; Kusumarini, Yusita; Basuki, Lucky
Intra Vol 6, No 2 (2018): Desain Interior 2017/2018
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (762.985 KB)

Abstract

Newspapers production produce tons of waste every day throughout Indonesia. Although the waste generated will be recycled for the next newspapers production, the fiber contained in the paper has its limitation. The problem statement of this research is how to process the newspapers’ waste into material for the furniture manufacturing and its application to the test making of chair furniture and bench. For that, mixed methods will be used in the research, which is a method that combines the qualitative approach and quantitative approach in order to understand the research better. To support the quantitative method in this study, the newspapers sheets experiment was conducted into a newspapers panel. The material used is newspapers sheet glued per sheet.                Optimized newspaper panels are made using yellow glue solution and glue diluent with a 2:1 ratio. Each size of ¼ pages of newspaper requires 2.5 ml of yellow glue solution per sheet, so for the size of 1 page of newspaper requires as much as 10 ml per sheet. The resulting panel has unstable thickness and weight because the workmanship uses manpower. The thickness and size of the panel produced affects the strength of the newspapers panel, as well as material panels in general. In addition, the treatment for panel construction as a furniture material cannot be equated with the construction treatment of processed wood waste material although initially the newspaper is considered processed wood.
Perancangan Etalase Toko Fashion dengan Sistem Modular Setiadi, Jovita Kolin; Kusumarini, Yusita; Suryanata, Linggajaya
Intra Vol 3, No 2 (2015): Desain Interior 2014/2015
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Nowadays lifestyle rapidly increases especially in the fashion industry. This makes many entrepreneurs start their business in retail fashion industry. The high competition demands entrepreneurs should have strategies in order to attract consumers' interest, one of the ways is by redesigning their window display areas. Therefore, a system is needed to be applied in window display area design with the emphasis on practicality in assembling. To achive this, the design requires observation, literature study and trials. As the base of the working process, this design applies the David Kelley’s design thinking method which done through numerous phases such as empathise phase (early phase), define (determining phase), ideate (ideation phase), prototype (trial and error) and test (the application).This design has 4 choice of categorized sets which are bag’s category, footwear’s category, clothing’s category and mix category. The applied system of this product is a modular system that has ease of assemble for the users. This design has the advantages which are the various different forms that can be created from modules in each category, as well as the budget cost which is affordable for fashion store entrepreneurs.
Perancangan Portable Folding Furniture untuk Interior Apartemen Tipe Studio Wijaya, Cindy; Kusumarini, Yusita; suprobo, filipus priyo
Intra Vol 3, No 2 (2015): Desain Interior 2014/2015
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Nowadays, studio type apartment become a choice of residence for people even though it has limited space.  Therefore, the furniture in the apartment should be a saving space one, because it does not make the circulation of the apartment smaller but it fulfills the needs of the occupant for furniture.  There are some methods that be used for this design, that are observation about the occupant’s needs of the furniture and analyze it, designing the furniture then analyze it again, after that make the prototype. Based the analysis, there are four types of main furniture that occupant needs, which are chair, table, bedside and storage. At the end, after design and the prototype making, it can be concluded that the saving space furniture such as folding furniture set is a good choice for studio type apartment.  Using multi-layered wood as the material for the design, the key of designing folding furniture is in the shape of it, and the system used like the folding system.
Perancangan Interior Student Social Space di Universitas Kristen Petra Surabaya (Konsekuensi Alih Fungsi Material Shipping Container) Chandra, Irvan Andreanto; Kusumarini, Yusita; Suryanata, Linggajaya
Intra Vol 3, No 2 (2015): Desain Interior 2014/2015
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1127.333 KB)

Abstract

Apart from a routine and systematic lectures in an university, it turns out that various students activities are a supportive activities of the main activities, which is the lectures itself. This activity is a spontaneous activity in a short period of time but done as routines in an everyday life, both by an individual or groups (social) such as; relaxing sit/resting while waiting for the lectures time, chatting with friends, eating and drinking, and so on. This design aim to create an area (space) that can facilitate those activities specifically and optimally. The designer desires to utilize the space of shipping container material is based on the reality that the accumulation of shipping containers in the harbor is increasing due to the cheaper budget in the making of a new one than reusing the old ones.                This design applies the design thinking methods that started from a data collection, programming, then initiation method and design visualization that ended with the realization phase and design evaluation. The finding results in 3 student social space designs from a functional shift of shipping container material in Petra Christian University Surabaya.
Eksperimen Modul High Temperature Composite Sebagai Material Produk Interior Victor, Victor; Kusumarini, Yusita
Intra Vol 6, No 2 (2018): Desain Interior 2017/2018
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

PT Pemuda Prima Usaha is a company engaged in the field of construction and engineering. The company has one of the products namely High Temperature Composite (HTC). This material has been widely applied to insulation in oil piping, but has not been applied in the field of interior. Therefore, this study aims to cultivate the development of HTC into interior materials. In addition, the potential of HTC research results will also be processed as furniture materials. After that evaluation is done to know the advantages and disadvantages of HTC. HTC material research in the form of experiments using a combination method of quantitative and qualitative methods. Quantitative method in this study are measuring the composition and strength, while the qualitative method will assess the aesthetics of the material. The result of material development in the form of new modules used as furniture material. Potential material modules in the form of furniture chairs, tables, and shelves can also be developed into several furniture. The results of the evaluation of new material testing are yellow, waterproof, heat-resistant, finishing, screw-able, and non-UV resistant.
Perancangan Interior Fasilitas Edukasi Hidroponik di Surabaya Natalia, Cynthia; Kusumarini, Yusita; Poillot, Jean Francois
Intra Vol 5, No 2 (2017): Desain Interior 2016/ 2017
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The increasingly rapid growth of population in urban areas results in an explosion of human population including in Surabaya city. Consequently, fields and farmlands are transformed into buildings. The lack of farmlands in the city instigates the birth of the urban farming concept. Urban farming is a concept that shifts conventional farming into city farming. Hydroponic is one of the urban farming techniques whereby soil is not required for planting.            In Surabaya, there is a facility that supports hydroponic education activities. However, this current facility is not optimally designed for educational purposes. The research questions of this design are: how to transform room organization within an existing building into a hydroponic education facilities,  design the interior of hydroponic education facilities where hydroponic plants can optimally grow in the room,  how to design the interior of an education facility where the room performance will optimize studying and the health of the people within. The design method is adapted from the process of design thinking that was done by Sarah Gibbons, Nielsen Norman Group through steps; empathize, define, ideate, prototype, test and implement.                The result of this design process is to create a programming that is the analysis of activities and room needs in order to obtain suitable room organization for the functions of hydroponic education facilities. The rooms are designed so that hydroponic plants can optimally grow within using climate control system technology that monitors the humidity, temperature, and wind so that visitors can feel comfortable being in the room whilst plants can still live. Hydroponic can be implemented to every room and can function as decoration as well as an education mean in rooms such as seminar and workshop room, so education activities becomes more optimal. The implementation of green interior concept utilizes ecofriendly materials, maximizes natural light and provides good air quality that is healthy of the users within.
Perancangan Interior Pusat Komunitas Penggemar Kue di Surabaya Hidayat, Natalia; Kusumarini, Yusita; basuki, lucky
Intra Vol 1, No 2 (2013): Desain Interior 2012/2013
Publisher : Intra

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The definition of interior design is to design a community center that is used to place a particular community gathering place. This is the appointed time fan community in Surabaya cake. Food is the main business promising, because everyone can not be separated from the feed. As more and more types of cakes that have sprung up, ranging from the long-known cake until the cake you just met, it would be nice if the fans of light snacks that is cakes are also know what and where they eat the cake. Expected by the community center's interior, can provide a container to gather, explore ideas, gain new experiences and obtain useful information between the members of the cake’s fan community in Surabaya.