Eka Setia Nugraha
Fakultas Teknik Telekomunikasi & Elektro, Institut Teknologi Telkom Purwokerto

Published : 18 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 18 Documents
Search

PENERAPAN METODE ACP UNTUK OPTIMASI PHYSICAL TUNING ANTENA SEKTORAL PADA JARINGAN 4G LTE DI KOTA PURWOKERTO PURNAMA, AFATAH; NUGRAHA, EKA SETIA; AMANAF, MUNTAQO ALFIN
ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika Vol 8, No 1 (2020): ELKOMIKA
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26760/elkomika.v8i1.138

Abstract

ABSTRAK Kualitas jaringan 4G (LTE) yang masih tidak stabil sehingga menyebabkan bad coverage. Untuk meningkatkan kualitas jarigan 4G (LTE) dapat dilakukan dengan optimasi physical tuning antena sektoral. Physical tuning antena sektoral meliputi perubahan tinggi antena, azimuth dan tilting antena. Pada penelitian ini dilakukan optimasi physical tuning antena sektoral menggunakan metode Automatic Cell Planning (ACP) untuk memenuhi kebutuhan coverage di daerah Purwokerto Barat dan Purwokerto Utara. Perolehan persentase coverage site existing belum memenuhi standar KPI Operator untuk RSRP sebesar 78,491% ? (100) dBm dan CINR sebesar 65,698% ? (0) dB. Hasil optimasi physical tuninng antena sektoral menggunakan metode ACP sudah memenuhi standar KPI Operator untuk RSRP sebesar 90,037% ? (100) dBm dan CINR sebesar 94,868% ? (0) dB. Kata kunci: LTE, optimasi, physical tuning, Automatic Cell Planning, Atoll ABSTRACT The quality of the 4G (LTE) network is still unstable, causing bad coverage. To improve the quality of 4G network (LTE) can be done by sectoral antenna tuning optimization. Physical tuning of sectoral antennas includes changes in antenna height, azimuth and tilting antenna. In this study a sectoral antenna tuning physical optimization was carried out using the Automatic Cell Planning (ACP) method to meet coverage needs in West Purwokerto and North Purwokerto areas. The percentage of existing coverage sites has not met the KPI Operator standard for RSRP of 78.491% 100 (100) dBm and CINR of 65.669% ? (0) dB. The results of sectoral antenna tuning optimization using the ACP method have met the KPI Operator standard for RSRP of 90.037% ? (100) dBm and CINR of 94.868% ? (0) dB. Keywords: LTE, optimization, physical tuning, Automatic Cell Planning, Atoll
Desain Modem Sistem Komunikasi Digital HF Berbasis Software Defined Radio Wicaksono, Agung; Nugraha, Eka Setia
Edu Komputika Journal Vol 8 No 1 (2021): Edu Komputika Journal
Publisher : Jurusan Teknik Elektro Universitas Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.15294/edukomputika.v8i1.47297

Abstract

Sistem komunikasi High Frequency (HF) bekerja menggunakan gelombang radio pada frekuensi 3-30 MHz yang merambat dalam bentuk skywave dengan bantuan lapisan ionosfer. Sistem komunikasi HF saat ini masih terbatas pada pengiriman suara, diharapkan dapat mengirimkan pesan berupa teks dengan menerapkan sistem komunikasi digital. Penelitian ini melaporkan desain modem sistem komunikasi digital HF menggunakan perangkat Software Defined Radio (SDR) untuk implementasi yang mudah. Modulasi dan Demodulasi memiliki peranan penting dalam sistem komunikasi digital. Evaluasi sistem dilakukan dengan eksperiment untuk mengukur Signal to Noise Ratio (SNR), Bit Error Rate (BER), Character Error Rate (CER), dan Frame Error Rate (FER) pada tipe pulse shaping Root Raised Cosine dengan Roll of Factor 0,5. Hasil eksperiment menunjukan bahwa implementasi sistem pada platform SDR dengan LabView sebagai user interface berhasil dilakukan.
Klasifikasi Kematangan Tanaman Hidroponik Pakcoy Menggunakan Metode SVM Lukman Priyambodo; Hanin Latif Fuadi; Naura Nazhifah; Ibrohim Huzaimi; Angga Bagus Prawira; Tasya Enjelika Saputri; Mas Aly Afandi; Eka Setia Nugraha; Agung Wicaksono; Petrus Kerowe Goran
Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi) Vol 6 No 1 (2022): Februari 2022
Publisher : Ikatan Ahli Informatika Indonesia (IAII)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (430.551 KB) | DOI: 10.29207/resti.v6i1.3828

Abstract

Pakcoy is a type of vegetable plant belonging to the Brassica family. Pakcoy plants can be cultivated using hydroponic techniques, namely plant cultivation techniques without soil media. The advantage of cultivating Pakcoy plants using hydroponic techniques is that it does not require a large area of ​​land, so it is easy to apply in the yard. However, cultivation with hydroponic techniques has drawbacks such as farmers need to make regular observations to determine the harvest readiness of each plant. This causes a lack of effectiveness of farmers in cultivating Pakcoy plants. With the development of Machine Learning technology, a model can classify the maturity of Pakcoy plants based on digital image data. By applying the Support Vector Machine (SVM) Algorithm, the Machine Learning model can learn to classify a digital image of Pakcoy plants with the category "Small" to represent immature Pakcoy plants and "Large" to represent mature Pakcoy plants which results in an accuracy level of above 79%. It can be concluded that Machine Learning can be implemented in Pakcoy cultivation activities to support hydroponic farmers.
PERANCANGAN JARINGAN INDOOR 4G LTE TDD 2300 MHZ MENGGUNAKAN RADIOWAVE PROPAGATION SIMULATOR Alfin Hikmaturokhman; Khoirun Ni’amah; Eka Setya Nugraha
Prosiding Seminar Nasional IPTEK Terapan (SENIT) 2016 Pengembangan Sumber Daya Lokal Berbasis IPTEK Vol 1, No 1 (2016): PROSIDING SEMINAR NASIONAL IPTEK TERAPAN 2016
Publisher : Prosiding Seminar Nasional IPTEK Terapan (SENIT) 2016 Pengembangan Sumber Daya Lokal Berbasis IPTEK

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Sistem jaringan selular indoor merupakan salah satu solusi untuk mengatasi lemahnya sinyal yang dipancarkan oleh eNodeB. Gedung dengan tingkat trafik komunikasi selular yang padat, seperti gedung konferensi, sekolah/kampus, perkantoran, pusat swalayan dan bandara memerlukan sistem jaringan indoor untuk menjaga kelangsungan komunikasi selular dan kebutuhan bit rate yang tinggi oleh semua user. Oleh karena itu, perlu dilakukan perencanaan jaringan indoor dengan menggunakan femtocell LTE. Penulisan Penelitian ini merancang jaringan indoor LTE di gedung kampus ST3 Telkom Purwokerto lantai 1 dan 2 berdasarkan model propagasi COST 231-Multiwall Indoor dengan menggunakan aplikasi Radiowave Propagation Simulator (RPS). Parameter yang dibutuhkan untuk perancangan jaringan selular indoor yaitu luas gedung, jenis material gedung dan jumlah user untuk mengetahui jumlah Femtocell Access Point (FAP) yang dibutuhkan agar semua ruangan dapat tercover dan mendapatkan sinyal yang bagus. Dari hasil perhitungan coverage, dengan total luas area yang direncanakan 1482 m2 dibutuhkan 10 FAP. Perancangan menggunakan 3 skenario, skenario terbaik adalah skenario 2 (FAP diletakkan di tengah-tengah setiap ruangan) menghasilkan level daya sinyal yaitu -63.91 dBm dan Signal to Interference Ratio (SIR) sebesar 3.00 dB. Untuk alokasi Physicall Cell Identity (PCI) total ada 10 nomor sesuai dengan jumlah FAP, karena tidak ada pembagian sektor pada setiap Femtocell Access Point (FAP). Kata kunci : Femtocell, LTE, Cakupan, Signal to Interference Ratio (SIR), Radiowave Propagation Simulator (RPS)
Antena Mikrostrip Multiple Input Multiple Output dengan Patch Rectangular pada Long Term Evolution Eka Wahyudi; Eka Setia Nugraha; Theodora Silva Munthe
Prosiding 2nd Seminar Nasional IPTEK Terapan (SENIT) 2017 Vol 2, No 1 (2017): Mei 2017
Publisher : Politeknik Harapan Bersama Tegal

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Komunikasi wireless menggunakan antena sebagai pemancar dan penerima sinyal informasi. Antena mikrostrip merupakan salah satu teknologi antena yang dapat dirancang dengan biaya murah, bentuk dan ukuran yang minimalis sehingga dapat diaplikasikan pada perangkat mobile. Antena mikrostrip dengan bentuk rectangular dirancang pada frekuensi 2,35 GHz untuk aplikasi LTE yang memanfaatkan teknik antena MIMO. Perancangan antena MIMO menggunakan dua buah antena dengan setiap saluran pencatu dibuat sehingga antena tidak saling mempengaruhi dengan melihat parameter koefisien korelasi harus < 0,2 dan nilai VSWR < 2. Untuk mendapatkan nilai VSWR < 2. Perancangan antena dioptimasi dengan metode e-shaped sehingga menghasilkan nilai parameter antena sesuai dengan spesifikasi perancangan antena. Hasil simulasi VSWR bernilai 1,15 sedangkan hasil pengukuran VSWR bernilai 1,16. Nilai bandwidth simulasi 48,1 MHz sedangkan hasil pengukuran bandwidth 68 MHz. Return loss simulasi yaitu -22,17 dB sedangkan saat pengukuran bernilai -22,931 dB. Impedansi simulasi sebesar 49,17 Ω sedangkan saat pengukuran bernilai 43,47 Ω. Sedangkan nilai koefisien pantul bernilai 0,06 sehingga saluran impedansi masih matching sempurna. Nilai gain simulasi 2,87 dB sedangkan saat pengukuran sebesar 4,99 dB. Untuk nilai koefisien korelasi simulasi saat frekuensi 2,35 GHz sebesar 7x10-5 sedangkan saat pengukuran sebesar 0,00192.
Pengaruh Space Diversity Terhadap Peningkatan Availability pada Jaringan Microwave Lintas Laut dan Lintas Pegunungan Dekri Belly Liu; Eka Wahyudi; Eka Setia Nugraha
Jurnal Elektro dan Telekomunikasi Terapan (e-Journal) Vol 4 No 2: JETT Desember 2017
Publisher : Direktorat Penelitian dan Pengabdian Masyarakat, Universitas Telkom

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (453.326 KB) | DOI: 10.25124/jett.v4i2.1107

Abstract

Availability merupakan suatu parameter yang digunakan untuk mengetahui kehandalan sistem pada jaringan microwave. Namun ada kalanya availability yang dihasilkan dalam perancangan sistem tidak optimal, maka perlu dilakukan optimasi. Optimasi dapat dilakukan dengan menggunakan teknik space diversity, di mana akan dilakukan penambahan antena diversity utuk melakukan optimasinya. Penelitian ini bertujuan untuk mengetahui peningkatan availability yang paling signifikan dari beberapa kondisi jaringan, yaitu berlokasi di atas laut dan daerah pegunungan. Jaringan yang berada di Laut menghasilkan peningkatan availability yang lebih tinggi dari pada jaringan yang berada di pegunungan. Peningkatan availability jaringan di laut yaitu 0,961446%, sedangkan peningkatan availability jaringan di pegunungan yaitu 0,060623475%. Hal tersebut dikarenakan pengaruh oleh terrain roughness, climatic factor dan C factor. Nilai terrain roughness jaringan laut yaitu 6,10 meter, sedangkan jaringan di pegunungan yaitu 32,10 meter. Kemudian climatic factor jaringan laut bernilai 2 sedangkan jaringan pegunungan bernilai 0,25. Semakin kecil nilai terrain roughness dan semakin besar nilai climatic factor mengakibatkan nilai C factor membesar. Nilai C factor jaringan laut yaitu 6,56 sedangkan jaringan di pegunungan yaitu 0,1.
Simulator Edukatif untuk Pembelajaran Algoritma Rapidly-exploring Random Tree (RRT) Eka Setia Nugraha
Telekontran : Jurnal Ilmiah Telekomunikasi, Kendali dan Elektronika Terapan Vol 7 No 2 (2019): TELEKONTRAN vol 7 no 2 Oktober 2019
Publisher : Program Studi Teknik Elektro, Fakultas Teknik dan Ilmu Komputer, Universitas Komputer Indonesia.

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (702.362 KB) | DOI: 10.34010/telekontran.v7i2.2651

Abstract

Abstract - This paper presents the design and use of educational simulators to assist in teaching motion planning material using the Rapidly-exploring Random Tree (RRT) algorithm. This simulator is made using Laboratory Virtual Instrumentation Engineering Workbench (LabVIEW). In this educational simulator also made several variations of the RRC, namely RRT*, bi-RRT and RRT biased. The advantage of this simulator is that each subprocess of the RRT algorithm can be visualized so that it will help improve understanding in learning this algorithm. The parameters of the RRT algorithm can also be easily modified so that they can be observed for the output performance of the RRT. Simulator performance testing is done by comparing its implementation in several existing benchmark cases. Because one of the important things in the path planning algorithm is about computational time, making this simulator software has been streamlined in order to obtain minimal system computing time. Using one of the benchmark cases in path planning, the RRT algorithm is designed to be able to arrange a path in 185 milliseconds, whereas if using the RRT* algorithm, the path planning can be completed in 1273 milliseconds. One of the ways to minimize this computation time is by minimizing overhead on subVI programs. Subhead overheads are minimized by making them subroutines. Therefore, the design of this simulator also avoids the use of functions in LabVIEW which cannot be used as subroutines. Using this simulator is expected to help students to get a better understanding of the motion planning algorithm using RRT. Keywords ­: Motion planning, Rapidly-exploring Random Tree, simulators, RRT variations, process visualization
Classification of Rupiah to Help Blind with The Convolutional Neural Network Method Octavian Ery Pamungkas; Puspa Rahmawati; Dhany Maulana Supriadi; Natasya Nur Khalika; Thofan Maliyano; Dicky Revan Pangestu; Eka Setia Nugraha; Mas Aly Afandi; Nurcahyani Wulandari; Petrus Kerowe Goran; Agung Wicaksono1
Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi) Vol 6 No 2 (2022): April 2022
Publisher : Ikatan Ahli Informatika Indonesia (IAII)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (528.735 KB) | DOI: 10.29207/resti.v6i2.3852

Abstract

Currency is an item humans require as a medium of exchange in transactions, including those with vision impairments. It can be challenging for certain blind people to identify currencies. This research aimed to help blind people identify nominal currency when in the transaction. Deep Learning with the CNN algorithm and preprocessing with a sequential model were used in this research. This algorithm is modeled as neurons in the human brain that communicate and learn patterns. Data collecting, preprocessing, testing, and evaluation are this research stage. Six hundred eighty-one datasets are used, consisting of IDR 50.000, IDR 75.000, and IDR 100.000. Model testing was carried out with different iterations of 5, 10, 15, and 20 epochs. Different epoch values will affect the time it takes the model to learn, but the length of the learning process will result in more accurate models. The highest result obtained from all epoch tests is 100%. The class prediction results for the 69 test data show that they can be predicted based on the actual class, indicating that the model is adequate. The results of this classification might be used to construct a smartphone app that would assist visually challenged people in recognizing the nominals.
Analysis Cost 231 MultiWall Model on 4G LTE FDD 1800 and 900 Mhz Femtocell Network Planning Alfin Hikmaturokhman; Solichah Larasati; Eka Setia Nugraha
JAICT Vol 1, No 1 (2016)
Publisher : Politeknik Negeri Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2653.684 KB) | DOI: 10.32497/jaict.v1i1.424

Abstract

Indoor cellular network system is one solution to overcome weak signals transmited by eNodeB. Building with high cellular communication traffic levels , requiring indoor network system to maintain continuity of communication by all users. Therefore, it is necessary to plan an indoor network using Femtocell Access Point (FAP). This research is based on network design indoor propagation COST 231-Multiwall Model using the software Radiowave Propagation Simulator (RPS) and conducted at Telkom Office. The collection of data obtained is used to perform calculations on research variables include the calculation of capacity and coverage. The research showed the number of FAP for capacity and coverage is 3 FAP. The Coverage Results for scenario 2 is the best result compared with the other scenarios, with the following results, the frequency of 1800 MHz at Building 1 of -19.86 dBm, Building 2 at -21.34 dBm, and Building 3 at -28, 07 dBm. While the scenario 2 for the 900 MHz frequency in Building 1 at -13.38 dBm, Building 2 at -14.52 dBm, and building 3 of -20.39 dBm.
Analisis Hasil Pengukuran Performansi Jaringan 4G LTE 1800 MHz di Area Sokaraja Tengah Kota Purwokerto Menggunakan Genex Asistant Versi 3.18 Ferdinanta Karo Karo; Eka Setia Nugraha; Fikri Nizar Gustiyana
AITI Vol 16 No 2 (2019)
Publisher : Fakultas Teknologi Informasi Universitas Kristen Satya Wacana

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (468.184 KB) | DOI: 10.24246/aiti.v16i2.115-124

Abstract

The implementation of 4G LTE network and its advantages gave us faster speed of mobile network. We need to know the performance of LTE mobile network in Sokaraja Tengah – Indonesia, which deployed by Telkomsel network provider by comparing its RSRP, SINR, RSRQ, and throughput using drive test method of Genex Probe. Signal performance was measured by drive test dedicated mode on the streamed videos and analyzed with Genex Assistant. The result shows that generally Telkomsel’s 4G LTE network in Sokaraja Tengah has 99.7% of (-70) – (-90) dBm RSRP value, 85.09% of 1-15 SINR value, 99.23% of (-15)-0 dBm RSRQ value, average uplink 2575 kbps and downlink 1530 kbps of throughput.