Garuda - Garba Rujukan Digital

PERBAIKAN BERKESINAMBUNGAN TERHADAP SISTEM PENELUSURAN MATERIAL DI PT XYZ Ayu, Ketut Gita; Septivani, Nike; Cahyadi, Randy; Oktavia, Hellen; Juanda, Fandy
Industrial and Systems Engineering Assessment Journal (INASEA) Vol 14, No 1 (2013): INASEA Vol. 14 No. 1
Publisher : Industrial and Systems Engineering Assessment Journal (INASEA)

Show Abstract | Download Original | Original Source | Check in Google Scholar

PT XYZ is engaged in the stamping and welding that produces various kinds of high-quality parts.Â There is a mismatch between the amount of material released with production, while the material trackingÂ system applied does not provide clear information about the flow of material issued for production processes.Â This led to the use of the material becomes less effective. Material tracking system used is form calledÂ identity tag. This study aims to: (1) determine the influencing factors of problems on the amount of materialÂ work in process both planned and actual, (2) determine what types of most frequent problematic products onÂ the amount of material work process, (3) determine an appropriate and effective system for PT XYZ inÂ implementing manufacturing processes, (4) optimize the use of raw materials produced. Methods to solve theÂ above problem are plan, do, check, action (PDCA) assisted with tools such as histograms, Pareto charts,Â cause-effect diagrams and kuesione. The result obtained and taken into consideration is giving improvementÂ suggestions, which are doing more inspections by the production leader to reduce the error informationÂ written on the identity tag, and providing some additional columns, such as description and causes of theÂ reduce in the amount of material that most often occurs. Based on the implementation results, theÂ discrepancy percentage in the identity tag proposals decreases to 45.45% for small part, 53.33%, forÂ medium part and 12.5% for large part, with a total percentage of 37.74% in week 1.

PERENCANAAN PRODUKSI DAN MATERIAL PRODUK KLEM, BRAKE DAN PLAT DI PT âXYZâ Ayu, Ketut Gita; Septivani, Nike; Halim, Meita; Chandra, Arif; Setiawan, Florence Nathania
Industrial and Systems Engineering Assessment Journal (INASEA) Vol 14, No 2 (2013): INASEA Vol. 14 No. 2
Publisher : Industrial and Systems Engineering Assessment Journal (INASEA)

Show Abstract | Download Original | Original Source | Check in Google Scholar

PT âXYZâis a manufacturing company specializing in pressed metal parts, dies, jigs and fixtures whichÂ is equipped with high-tech equipment and qualified human resources. PT âXYZâused a system of safety stockÂ (buffer stock) of three kanban to anticipate a shortage of stock or production of raw materials in the productionÂ process. A research was done at PT âXYZâwhich focused on the degree of conformity between actualÂ production planning by the state was obtained on the basis of the measurement of the product cycle, productionÂ capacity, actual production, production planning and material needs. The plan scheduling and materialÂ requirement planning used lot for lot method. It is needed to set the production scheduling with consideration ofÂ actual production plan where the production capacity of each product to be examined, namely the process ofbending klem = 680 pcs/hour, brake with bending process II = 680 pcs/hour and plat with a capacity of blankÂ process = 1.888 pcs/hour which are used the maximum production capacity. Lead time and safety stock are alsoÂ considered as factors affecting the scheduling. From the result of making MRP, we found that the materialÂ ordering must consider the capacity of a coil for each item and the on hand (inventory) from the last production.Â The production planning proposal of this research was able to fulfil the supply as many as three kanban. InÂ addition, the planning could increase the work productivity as well as time and cost efficiency. The MRP with lotfor lot method was declared valid because it fulfilled the assumptions of MRP for some products. PT âXYZâisÂ expected to plan a system of procurement of raw materials and production systems in order to meet marketÂ demand with the number of raw material orde. The company was expected to pay attention to lead time toÂ reduce the risk of material shortages for production.

Proses Produksi di Pabrik Tabung Elpiji Septivani, Nike
ComTech: Computer, Mathematics and Engineering Applications Vol 3, No 1 (2012): ComTech
Publisher : Bina Nusantara University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21512/comtech.v3i1.2455

Currently the use of liquefied petroleum gas is urgently needed as a substituting fuel in both household sector and industrial sector. The Government’s program namely the conversion of kerosene to LPG encouraged people who still use kerosene as a fuel to switch to LPG. There are some public complaints about the quality of the conversion product such as conflagration that occurs frequently caused by the explosion of LPG tube. Application of SNI LPG tube related to the energy conversion program is expected to give a safer condition to the users. This study is conducted by analyzing the quality requirement of LPG tube products according to SNI as well as to identify the fulfillment of LPG tube products.

Porcelain Product Quality Analysis in PT XYZ Chie, Ho Hwi; Nasution, Januar; Ayu, Ketut Gita; Septivani, Nike; Renaldi, Yualfin
ComTech: Computer, Mathematics and Engineering Applications Vol 6, No 4 (2015): ComTech
Publisher : Bina Nusantara University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21512/comtech.v6i4.2195

PT. XYZ is a company engaged in manufacturing porcelain dinner ware such as plates, cups, teapot, bowl, etc Porcelain product is safe for use and product defect will only affect the aesthetic not the functional side. The company always maintain the quality of the products produced as by maintaining a good product, in terms of visuals, will keep customers interested in the product. Good quality products characterized by quality A / B and C, and the product defect characterized by the quality of D, Lost, and BU. Concepts and methods used to analyze is a statistical process control (SPC) which includes Pareto diagram, fraction nonconformities, flow charts and fishbone diagrams and management tools (fault tree analysis). Statistical Process Control (SPC) is one of the methods, which includes Pareto charts, fraction nonconformities, flow chart, and fishbone diagram and also management tools (fault tree analysis). SPC is useful to find the facts from the problems and factors that affect the quality of the products, while fault tree analysis is useful to analyze each of the production process.

Lean Strategy Implementation to Improve Throughput in Assembly Line: Dul-Db21ssc Manufacturing Process at PT. X Santoso, Gemma Eka; Ayu, Gita; Septivani, Nike
ComTech: Computer, Mathematics and Engineering Applications Vol 4, No 1 (2013): ComTech
Publisher : Bina Nusantara University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21512/comtech.v4i1.2749

Lean production has dramatically lifted the competitiveness of many manufacturing companies and the value they deliver to customers. This project examines the benefit of balancing process and workstation arrangement of dogbone damper in an order that maintains a smooth flow of materials and component through the process. The analysis begins from calculating takt value to establish the required rate of production. From here, any total cycle time exceeding takt time is called a bottleneck process and should become a target of the improvement. Next, arranging people and equipment into cells has great advantage in terms of achieving lean goals. One advantage of cells is the one-piece flow concept, which states that each product moves through the process one unit a time without sudden interruption, at a pace determined by the customer?s need.

Porcelain Product Quality Analysis in PT XYZ Ho Hwi Chie; Januar Nasution; Ketut Gita Ayu; Nike Septivani; Yualfin Renaldi
ComTech: Computer, Mathematics and Engineering Applications Vol. 6 No. 4 (2015): ComTech
Publisher : Bina Nusantara University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21512/comtech.v6i4.2195

PT. XYZ is a company engaged in manufacturing porcelain dinner ware such as plates, cups, teapot, bowl, etc Porcelain product is safe for use and product defect will only affect the aesthetic not the functional side. The company always maintain the quality of the products produced as by maintaining a good product, in terms of visuals, will keep customers interested in the product. Good quality products characterized by quality A / B and C, and the product defect characterized by the quality of D, Lost, and BU. Concepts and methods used to analyze is a statistical process control (SPC) which includes Pareto diagram, fraction nonconformities, flow charts and fishbone diagrams and management tools (fault tree analysis). Statistical Process Control (SPC) is one of the methods, which includes Pareto charts, fraction nonconformities, flow chart, and fishbone diagram and also management tools (fault tree analysis). SPC is useful to find the facts from the problems and factors that affect the quality of the products, while fault tree analysis is useful to analyze each of the production process.

Proses Produksi di Pabrik Tabung Elpiji Nike Septivani
ComTech: Computer, Mathematics and Engineering Applications Vol. 3 No. 1 (2012): ComTech
Publisher : Bina Nusantara University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21512/comtech.v3i1.2455

Currently the use of liquefied petroleum gas is urgently needed as a substituting fuel in both household sector and industrial sector. The Government’s program namely the conversion of kerosene to LPG encouraged people who still use kerosene as a fuel to switch to LPG. There are some public complaints about the quality of the conversion product such as conflagration that occurs frequently caused by the explosion of LPG tube. Application of SNI LPG tube related to the energy conversion program is expected to give a safer condition to the users. This study is conducted by analyzing the quality requirement of LPG tube products according to SNI as well as to identify the fulfillment of LPG tube products.

Lean Strategy Implementation to Improve Throughput in Assembly Line: Dul-Db21ssc Manufacturing Process at PT. X Gemma Eka Santoso; Gita Ayu; Nike Septivani
ComTech: Computer, Mathematics and Engineering Applications Vol. 4 No. 1 (2013): ComTech
Publisher : Bina Nusantara University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21512/comtech.v4i1.2749

Lean production has dramatically lifted the competitiveness of many manufacturing companies and the value they deliver to customers. This project examines the benefit of balancing process and workstation arrangement of dogbone damper in an order that maintains a smooth flow of materials and component through the process. The analysis begins from calculating takt value to establish the required rate of production. From here, any total cycle time exceeding takt time is called a bottleneck process and should become a target of the improvement. Next, arranging people and equipment into cells has great advantage in terms of achieving lean goals. One advantage of cells is the one-piece flow concept, which states that each product moves through the process one unit a time without sudden interruption, at a pace determined by the customer’s need.

THE PHENOMENON OF ONLINE GAMBLING UNDER THE GUISE OF ONLINE GAMES AMONG THE YOUNGER GENERATION Indra, I Made; Japari, Antony; Novika, Fanny; Septivani, C. Nike; Rosmayanti, Melinia; Karina, Enno; Chalista, Bunga
International Journal of Multidisciplinary Research and Literature Vol. 4 No. 1 (2025): INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY RESEARCH AND LITERATURE
Publisher : Yayasan Education and Social Center

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53067/ijomral.v4i1.294

The increasing prevalence of online gambling cases among the young generation in Indonesia has a negative impact in that the younger generation is addicted to online gambling games that are easily accessible anywhere 24 hours a day, which only have a Wi-Fi network, through smartphones, and laptops. This study uses a descriptive method with a quantitative approach; the implementation time of this research starts from September 2024 to December 2024. The population in this study is the entire community attracted to the younger generation, namely those aged 17-29 years who use social media, such as Instagram. The research sample is the younger generation willing to become respondents by promoting a questionnaire on Instagram ads for 1 month. The number of respondents in the study was 90 respondents. The results of the study found that the majority of respondents who were exposed to online games under the guise of gambling were young generations aged 17-20 years. This age group is more vulnerable to social and digital influences due to the level of media literacy and self-control that is not fully mature. Involvement in online gambling is influenced by economic factors, such as low income and the assumption that gambling is an easy way to gain financial benefits. Technology, especially stable internet access, and social media is the main means that facilitate this engagement. Influence from friends, social media promotion, and the presence of influencers are the main drivers of respondents' involvement in gambling activities. Many respondents are exposed to online games through their social environment. Online gambling activities under the guise of gaming have had a negative impact, including difficulty controlling spending, increased addiction, and even a desire to go into debt to continue playing. It shows the addictive and destructive nature of gambling. Some respondents believe their skills or experience can increase their chances of winning. This belief encourages them to continue playing even though losses occur more often.

GAMBARAN JENIS RISIKO PENGELOLAAN BANTUAN SOSIAL SELAMA PANDEMI COVID-19 DI INDONESIA Indra, I Made; Wahyuari; Septivani, C. Nike; Kusdani, Dedi
Premium Insurance Business Journal Vol. 8 No. 1 (2021): PREMIUM INSURANCE BUSINESS JOURNAL
Publisher : Pusat Penelitian dan Pengabdian Kepada Masyarakat Sekolah Tinggi Manajemen Asuransi Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1099.481 KB)

Risk management is very important for the continuity of a business or activity. If a disaster occurs, such as fire or damage, the company will suffer huge losses, which can hinder, disrupt or even destroy business continuity or operations. Risk management is a tool to protect the company from any possible harm. So that in the management of logistical assistance, especially when a disaster occurs, both natural and non-natural, a risk management effort is needed in order to reduce the impact of losses in operations. This research uses explanatory type. The samples in this study were derived from elements of government, academia and society with qualitatively managed data. The results of the study found 8 risk categories that occurred in the logistical assistance process during the Covid-19 pandemic in Indonesia, namely: policy risk, compliance risk, legal risk, fraud risk, reputation risk, reputation risk and operational risk.

Title

Found 13 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 13 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 13 Documents
Search