Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Semesta Teknika

Thermal Resistance of the Loop Heat Pipe Prototype in Steady State Conditions Haryanto, Dedy; Giarno, Giarno; Hatmoko, Sumantri; Pambudi, Yoyok Dwi Setyo; Kusuma, M. Hadi
Semesta Teknika Vol 26, No 2 (2023): NOVEMBER
Publisher : Universitas Muhammadiyah Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.18196/st.v26i2.18788

Abstract

The nuclear accident at the Fukushima Daiichi nuclear power plant in March 2011 in Japan caused a tsunami and submerged the emergency diesel generator resulting in a station blackout (SBO). Based on the accident, a study was conducted on the use of passive safety systems as a support for active safety systems in nuclear reactor cooling systems. The Loop Heat Pipe (LHP) prototype is a small-scale LHP research facility, one of which is used to determine the characteristics and heat transfer events in LHP. Calculations to determine the thermal resistance of the LHP prototype need to be carried out to determine its performance level. The research was carried out experimentally for data collection followed by calculations based on the data that had been obtained. The calculation results obtained that the lowest thermal resistance is 0.014 °C/w with a 100% filling ratio and an airflow velocity of 2.5 m/s, so the setting of filling ratio and airflow velocity produces the best LHP prototype performance. The higher the airspeed, the greater the heat released by the condenser resulting in the value of the thermal resistance of the LHP prototype getting smaller. Thus, the greater the airspeed, the lower the thermal resistance of the LHP prototype, this indicates that the performance of the LHP prototype is increasing.
Perbandingan Standardized Precipitation Index dan Standardized Anomaly Index untuk Penentuan Tingkat Kekeringan di Kabupaten Sragen, Jawa Tengah Ramdhani, Muhammad Zaki; Arifianto, Fendy; Giarno, Giarno
Semesta Teknika Vol 26, No 1 (2023): MEI
Publisher : Universitas Muhammadiyah Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.18196/st.v26i1.16310

Abstract

Kekeringan adalah suatu peristiwa dimana terjadinya penurunan intensitas curah hujan dan mengakibatkan krisis air untuk menunjang kebutuhan sehari hari manusia. Kasus kekeringan selalu terjadi setiap tahun di Jawa Tengah dengan berbagai macam dampak yang ditimbulkan. Tujuan dari penelitian ini adalah untuk mengetahui perbedaan pada indeks kekeringan yang digunakan, yaitu indeks kekeringan Standardized Precipitation Index (SPI) dan indeks kekeringan Standardized Anomaly Index (SAI). Penelitian ini dilakukan dengan menggunakan metode analisa secara spasial menggunakan metode perhitungan indeks kekeringan SPI dan SAI. Hasil yang diperoleh yaitu pada perhitungan menggunakan rumus SPI maupun SAI untuk menentukan tingkat kekeringan di Kabupaten Sragen periode 2011-2020 memiliki kesamaan pola sebesar 89% untuk tahun kering dan tahun basah. Selain itu, kasus kekeringan di Kabupaten Sragen untuk setiap tahunnya di dominasi oleh kategori normal. Tahun kekeringan terjadi pada tahun 2012, 2015, 2018 dengan kasus kekeringan sedang, tahun 2014 dan tahun 2019 dengan kasus kekeringan parah.