Garuda - Garba Rujukan Digital

Perbandingan Pengolahan Data Foto Udara Menggunakan Perangkat Lunak Agisoft Metashape Professional dan APS Menci Ardiansyah Ardiansyah; Shabri Indra Suryalfihra; Dawamul Arifin; F. V. Astrolabe Sian Prasetya
Journal of Geomatics Engineering, Technology, and Sciences Vol. 1 No. 2 (2023): March 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v1i2.20

Photogrammetry is a method of mapping objects on the earth's surface using aerial photographs as a medium. Orthophoto is a product of photogrammetry. Utilization and processing of aerial photo data are increasingly widespread with the support of various adequate software. This study aims to process aerial photo data and determine differences in the quality of orthophotos produced from Agisoft Metashape and APS Menci software. In this study, 714 aerial photo data were taken using the DJI Phantom 3 pro drone, and 9 Ground Control Points were obtained from static measurements using the Comnav T300 Geodetic GPS, processed using the Agisoft Metashape and APS Menci software, starting from Georeferencing, DEM Making, DTM, Editing Semalines, and Orthophoto. The results obtained from this study visually produce orthophotos that have different lighting. APS Menci is brighter than Agisoft Metashape. In addition, there is also a difference in the area of 9.1 Ha from orthophoto where Agisoft Metashape produced 64.61 Ha while APS Menci was 55.51 Ha. The GSD (Ground Sampling Distance) value of Agisoft Metashape is 4.12 cm and APS Menci is 4.2 cm. From the results of the orthophoto semantic quality test obtained from the interpreter it gives a Level 7 score on the NIIRS (National Imagery Interpretability Rating Scale) based on the IRARS (Imagery Resolution Assessment and Reporting Standards) table, where the resulting orthophoto can detect steps on stairs. It is recommended to use the Agisoft Metashape software for better results and speed of use.

Identifikasi Penggunaan Lahan Perumahan Bukit Indah Permai Kota Samarinda dengan Menggunakan Orthophoto Artanti Tustika; Dawamul Arifin; Radik Khairil Insanu; Nia Kurniadin
Journal of Geomatics Engineering, Technology, and Sciences Vol. 1 No. 2 (2023): March 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v1i2.25

Land use according to the Basic Agrarian Law is the structure and pattern of land use, whether planned or not, which includes land supply, land allotment, land use, and maintenance. Land use is regulated to meet activities. Sustainable social and livelihood activities result in the amount of land needed, type, and location. Land use arrangements determine social accessibility, economic opportunity, movement patterns, and survival. Bids to change land use patterns should take into account the problems that will arise as a result of land use reforms. Land use information will be able to be used as data/information in making decisions on the development planning of an area. Bukit Indah Permai housing is one of the housing areas in the Samarinda which offers several types of housing, like types 21, 27, 36, and type 45. Land use information from the Bukit Indah Permai housing area will be able to provide consideration for potential consumers to make Bukit Indah Permai housing the residence of their choice. From the results of ortho data processing, it can be seen that land use in Bukit Indah Indah housing includes housing, green open spaces, public facilities (roads), and social facilities. Each of these land uses has a different area, namely for the area of land use as housing is 50.57%, land use as green open space covers an area of 32.3%, land use for social and public facilities (road) respectively - 3.65% and 13.48%.

Detection of the Post-Earthquake Damage in Mamuju Regency in January 2021 Using Sentinel-1 Satellite Imagery Zulfha Diya Nur Ardzilla; Nia Kurniadin; F. V. Astrolabe Sian Prasetya; Romansah Wumu; Dawamul Arifin; Shabri Indra Suryalfihra
Poltanesa Vol 24 No 1 (2023): June 2023
Publisher : P2M Politeknik Pertanian Negeri Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/tanesa.v24i1.2495

Friday, January 15 2021 at 02:28:21 Local Time, a tectonic earthquake with a magnitude of 6.2 occurred in Mamuju Regency. The epicenter of the earthquake was on land and at 38 km in depth, 6 km to the northeast of Majene, West Sulawesi Province. This earthquake has damaged buildings such as the West Sulawesi Governor’s Office, the Mitra Manakara Hospital, and landslides at several points on Mamuju – Majene highway. The purpose of this research is to determine the post-earthquake damage that occurred in Mamuju Regency and to find out the area that was detected because of the earthquake. By using Sentinel-1 satellite image data and the change detection method from two Sentinel-1 SAR images, ESA SNAP software is used for data processing by using a threshold classification on the images before and after the earthquake, then converting Raster to Vector, Clip according to the boundaries of Mamuju Regency and Layouts using ArcGIS software. The results of this study are the detection of the post-earthquake damage that occurred in Mamuju Regency of 100.64 km2 (14.78%) total area of damage detected. This research also obtained post-earthquake damage detection maps.

Evaluasi Nilai Volume Produksi Overburden di PT Ansaf Inti Resources Site Berambai Bulan September 2022 Muhammad Havit Pratama; Dawamul Arifin; Radik Khairil Insanu; Nia Kurniadin
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 1 (2023): September 2023
Publisher : Politeknik Pertanian Negeri Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i1.30

PT. Ansaf Inti Resources is located in Kec. Kutai Kartanegara, East Kalimantan. The coal mining process is preceded by excavation of overburden or activities carried out prior to coal getting to meet its production target, in determining the volume of overburden stripping in the Alam 4 pit survey activities are carried out and the determination of the rate of conveyance. In survey activities carried out by measuring the coordinates of X/easting, Y/northing and Z/elevation. The purpose of conducting research on, "Knowing the Value of Mine Production Volume based on Overburden Material Stripping survey data, truck count data Using Surpac Software" is to know the measurement of overburden progress survey in the mining area, know the calculation of overburden progress survey volume and find out the results of comparison of progress survey volume with calculations the number of trucks carrying overburden. The methodology used in this study consisted of the research preparation stage, the data collection stage, namely secondary data obtained indirectly from the survey team in the field. The results of measurements and calculations regarding the progress survey conducted in September 2022 obtained the overburden volume value in the first week of 76,289.77 BCM/m3, in the second week the overburden volume value was obtained 55,826.43 BCM/m3, in the third week the results were obtained the result of the overburden volume value is 44,179.01 BCM/m3, in the fourth week the result of the overburden volume value is 60,290.74 BCM/m3.

Pemanfaatan Citra Sentinel-1 untuk Deteksi Kerusakan Akibat Gempa Bumi di Kabupaten Cianjur Arida Vania Firdaus; Nia Kurniadin; A. Arifin Itsnani SM; Dawamul Arifin
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 1 (2023): September 2023
Publisher : Politeknik Pertanian Negeri Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i1.32

The earthquake in Cianjur Regency, West Java Province, on November 21, 2022 at 13:21:10 Western Indonesia Time. The earthquake's epicenter was at coordinates 6.84° South Latitude and 107.05° East Longitude located about 9.65 km southwest of Cianjur City or 16.8 km northeast of Sukabumi City, with a magnitude of 5.6 at a depth of 10 km. These earthquakes include a shallow crustal tectonic earthquake (shallow crustal earthquake) with a mainshock-aftershock type. Major earthquakes (mainshocks) with a magnitude of 5.6 and aftershocks with a magnitude of 1.2–4.2 and an average depth of about 10 km, of which 5 are felt by the surrounding communities. This study aims to find out the area that suffered damage after the earthquake that occurred in Cianjur Regency, West Java. By using Sentinel-1 satellite image data with ascending and descending orbits in Cianjur Regency, data processing is carried out using ESA SNAP software, then followed by raster to vector, clips of administrative boundaries for Cianjur Regency and making map layouts using ArcGIS software. The results of this study show that 47.10% of the area was affected and suffered severe damage with a total area of 55.73 km2 detected. The total area detected in each district is Agrabinta 0,73 km2; Bojongpicung 0,97 km2; Campaka 1,76 km2; Campakamulya 0,29 km2; Cianjur 0,65 km2; Cibeber 1,42 km2; Cibinong 4,79 km2; Cidaun 2,69 km2; Cijati 0,36 km2; Cikadu 9,47 km2; Cikalong Kulon 1,24 km2; Cilaku 0,60 km2; Cipanas 2,95 km2; Ciranjang 0,18 km2; Cugenang 1,69 km2; Gekbrong 0,90 km2; Haurwangi 0,47 km2; Kadupandak 0,40 km2; Karangtengah 0,65 km2; Leles 1,47 km2; Mande 0,94 km2; Naringgul 10,49 km2; Pacet 1,13 km2; Pagelaran 1,88 km2; Pasirkuda 2,03 km2; Sindangbarang 1,22 km2; Sukaluyu 0,45 km2; Sukanagara 1,10 km2; Sukaresmi 0,81 km2; Takokak 0,57 km2; Tanggeung 0,72 km2; Warung Kondang 0,71 km2. The results of this study were obtained in the form of a post-earthquake damage detection map.

Pemetaan Deforestasi dan Perubahan Tutupan Lahan di Wilayah Pertambangan Nikel Kecamatan Pomalaa Memanfaatkan Teknologi Penginderaan Jauh Andi Baso Sofyan A. P.; Feri Fadlin; Dawamul Arifin; Radik Khairil Insanu; Ahmad Aris Mundir Sutaji
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 2 (2024): March 2024
Publisher : Politeknik Pertanian Negeri Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i2.35

Pomalaa District, Kolaka Regency, Southeast Sulawesi Province, is one of the regions in Indonesia which has quite large mining potential, especially for nickel commodities. The stages of nickel mining activities consist of land clearing activities which can cause deforestation or reduction of forest area. The aim of this research is to map deforestation and land cover changes that occur in the nickel mining area of Pomalaa District. It is expected that the results of this research can be used as consideration in formulating policies for efforts to rehabilitate land damaged by mining activities in Pomalaa District, Kolaka Regency, Southeast Sulawesi Province. The method used in this research is multi-time remote sensing image data analysis. The data used are Landsat 8 images in 2014, 2018 and 2023 to analyze changes in forest areas and changes in land cover at the research location during that time period. The results of the research show that there has been a decrease in the area of forest and vegetated areas, that is in 2014 the area reached 17,207.9 hectares to 16,178.4 hectares in 2018 and 16,110.1 hectares in 2023. Meanwhile, the mine excavation area has increased from 1,792.3 hectares in 2014 to 2,005.4 hectares in 2023. Likewise, the area of built-up land and open land has increased from 3,509.3 hectares in 2014 to 4,370.7 hectares in 2023.

Perbandingan Pengolahan Data Foto Udara Menggunakan Perangkat Lunak Agisoft Metashape Professional dan APS Menci Ardiansyah, Ardiansyah; Suryalfihra, Shabri Indra; Arifin, Dawamul; Prasetya, F. V. Astrolabe Sian
Journal of Geomatics Engineering, Technology, and Science Vol. 1 No. 2 (2023): March 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v1i2.20

Photogrammetry is a method of mapping objects on the earth's surface using aerial photographs as a medium. Orthophoto is a product of photogrammetry. Utilization and processing of aerial photo data are increasingly widespread with the support of various adequate software. This study aims to process aerial photo data and determine differences in the quality of orthophotos produced from Agisoft Metashape and APS Menci software. In this study, 714 aerial photo data were taken using the DJI Phantom 3 pro drone, and 9 Ground Control Points were obtained from static measurements using the Comnav T300 Geodetic GPS, processed using the Agisoft Metashape and APS Menci software, starting from Georeferencing, DEM Making, DTM, Editing Semalines, and Orthophoto. The results obtained from this study visually produce orthophotos that have different lighting. APS Menci is brighter than Agisoft Metashape. In addition, there is also a difference in the area of 9.1 Ha from orthophoto where Agisoft Metashape produced 64.61 Ha while APS Menci was 55.51 Ha. The GSD (Ground Sampling Distance) value of Agisoft Metashape is 4.12 cm and APS Menci is 4.2 cm. From the results of the orthophoto semantic quality test obtained from the interpreter it gives a Level 7 score on the NIIRS (National Imagery Interpretability Rating Scale) based on the IRARS (Imagery Resolution Assessment and Reporting Standards) table, where the resulting orthophoto can detect steps on stairs. It is recommended to use the Agisoft Metashape software for better results and speed of use.

Identifikasi Penggunaan Lahan Perumahan Bukit Indah Permai Kota Samarinda dengan Menggunakan Orthophoto Tustika, Artanti; Arifin, Dawamul; Insanu, Radik Khairil; Kurniadin, Nia
Journal of Geomatics Engineering, Technology, and Science Vol. 1 No. 2 (2023): March 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v1i2.25

Land use according to the Basic Agrarian Law is the structure and pattern of land use, whether planned or not, which includes land supply, land allotment, land use, and maintenance. Land use is regulated to meet activities. Sustainable social and livelihood activities result in the amount of land needed, type, and location. Land use arrangements determine social accessibility, economic opportunity, movement patterns, and survival. Bids to change land use patterns should take into account the problems that will arise as a result of land use reforms. Land use information will be able to be used as data/information in making decisions on the development planning of an area. Bukit Indah Permai housing is one of the housing areas in the Samarinda which offers several types of housing, like types 21, 27, 36, and type 45. Land use information from the Bukit Indah Permai housing area will be able to provide consideration for potential consumers to make Bukit Indah Permai housing the residence of their choice. From the results of ortho data processing, it can be seen that land use in Bukit Indah Indah housing includes housing, green open spaces, public facilities (roads), and social facilities. Each of these land uses has a different area, namely for the area of land use as housing is 50.57%, land use as green open space covers an area of 32.3%, land use for social and public facilities (road) respectively - 3.65% and 13.48%.

Evaluasi Nilai Volume Produksi Overburden di PT Ansaf Inti Resources Site Berambai Bulan September 2022 Pratama, Muhammad Havit; Arifin, Dawamul; Insanu, Radik Khairil; Kurniadin, Nia
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 1 (2023): September 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i1.30

Ansaf Inti Resources is located in Kec. Kutai Kartanegara, East Kalimantan. The coal mining process is preceded by excavation of overburden or activities carried out prior to coal getting to meet its production target, in determining the volume of overburden stripping in the Alam 4 pit survey activities are carried out and the determination of the rate of conveyance. In survey activities carried out by measuring the coordinates of X/easting, Y/northing and Z/elevation. The purpose of conducting research on, "Knowing the Value of Mine Production Volume based on Overburden Material Stripping survey data, truck count data Using Surpac Software" is to know the measurement of overburden progress survey in the mining area, know the calculation of overburden progress survey volume and find out the results of comparison of progress survey volume with calculations the number of trucks carrying overburden. The methodology used in this study consisted of the research preparation stage, the data collection stage, namely secondary data obtained indirectly from the survey team in the field. The results of measurements and calculations regarding the progress survey conducted in September 2022 obtained the overburden volume value in the first week of 76,289.77 BCM/m3, in the second week the overburden volume value was obtained 55,826.43 BCM/m3, in the third week the results were obtained the result of the overburden volume value is 44,179.01 BCM/m3, in the fourth week the result of the overburden volume value is 60,290.74 BCM/m3.

Pemanfaatan Citra Sentinel-1 untuk Deteksi Kerusakan Akibat Gempa Bumi di Kabupaten Cianjur Firdaus, Arida Vania; Kurniadin, Nia; Itsnani SM, A. Arifin; Arifin, Dawamul
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 1 (2023): September 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i1.32

The earthquake in Cianjur Regency, West Java Province, on November 21, 2022 at 13:21:10 Western Indonesia Time. The earthquake's epicenter was at coordinates 6.84° South Latitude and 107.05° East Longitude located about 9.65 km southwest of Cianjur City or 16.8 km northeast of Sukabumi City, with a magnitude of 5.6 at a depth of 10 km. These earthquakes include a shallow crustal tectonic earthquake (shallow crustal earthquake) with a mainshock-aftershock type. Major earthquakes (mainshocks) with a magnitude of 5.6 and aftershocks with a magnitude of 1.2–4.2 and an average depth of about 10 km, of which 5 are felt by the surrounding communities. This study aims to find out the area that suffered damage after the earthquake that occurred in Cianjur Regency, West Java. By using Sentinel-1 satellite image data with ascending and descending orbits in Cianjur Regency, data processing is carried out using ESA SNAP software, then followed by raster to vector, clips of administrative boundaries for Cianjur Regency and making map layouts using ArcGIS software. The results of this study show that 47.10% of the area was affected and suffered severe damage with a total area of 55.73 km2 detected. The total area detected in each district is Agrabinta 0,73 km2; Bojongpicung 0,97 km2; Campaka 1,76 km2; Campakamulya 0,29 km2; Cianjur 0,65 km2; Cibeber 1,42 km2; Cibinong 4,79 km2; Cidaun 2,69 km2; Cijati 0,36 km2; Cikadu 9,47 km2; Cikalong Kulon 1,24 km2; Cilaku 0,60 km2; Cipanas 2,95 km2; Ciranjang 0,18 km2; Cugenang 1,69 km2; Gekbrong 0,90 km2; Haurwangi 0,47 km2; Kadupandak 0,40 km2; Karangtengah 0,65 km2; Leles 1,47 km2; Mande 0,94 km2; Naringgul 10,49 km2; Pacet 1,13 km2; Pagelaran 1,88 km2; Pasirkuda 2,03 km2; Sindangbarang 1,22 km2; Sukaluyu 0,45 km2; Sukanagara 1,10 km2; Sukaresmi 0,81 km2; Takokak 0,57 km2; Tanggeung 0,72 km2; Warung Kondang 0,71 km2. The results of this study were obtained in the form of a post-earthquake damage detection map.

Title

Found 31 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 31 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 31 Documents
Search