Claim Missing Document
Check
Articles

Found 20 Documents
Search

PEMETAAN SEBARAN SUHU PERMUKAAN LAUT (SPL) SEBAGAI PARAMETER PENENTUAN POTENSI PERIKANAN DAN BUDIDAYA DI PESISIR PERAIRAN DELTA MAHAKAM, KALIMANTAN TIMUR Radik Khairil Insanu; F.V. Astrolabe Sian Prasetya
Elipsoida : Jurnal Geodesi dan Geomatika Vol 4, No 01 (2021): Volume 04 Issue 01 Year 2021
Publisher : Department of Geodesy Engineering, Faculty of Engineering, Diponegoro University,Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/elipsoida.2021.10050

Abstract

Delta Mahakam terbentuk pada muara Sungai Mahakam yang terletak di pantai timur Pulau Kalimantan, antara 0°20' LS dan 117°40' BT. Kawasan Delta Mahakam merupakan wilayah yang kaya akan sumber daya alam, terutama minyak bumi dan gas alam (migas). Selain potensi sumber daya alam ini, delta Mahakam juga memiliki potensi dalam bidang perikanan maupun budidaya perairan. Potensi lingkungan pesisir ini dapat ditinjau dari parameter-parameter oseanografinya seperti suhu permukaan laut (SPL), salinitas serta padatan tersuspensi (TSS) dan sebagainya. Penelitian ini bertujuan untuk memetakan sebaran suhu permukaan laut sebagai salah satu parameter penentuan potensi lingkungan pesisir. Metode penelitian ini menggunakan citra satelit LANDSAT 8 pada tanggal 23 Januari, 12 April dan 24 April dengan algoritma USGS 2013 dari artikel sijuntak untuk memperoleh nilai suhu permukaan laut perairan Delta Mahakam. Hasil dari penelitian ini suhu permukaan laut didominasi pada rentang suhu 19˚C -27˚C yang menyebar di Delta Mahakam. Selisih suhu antara suhu lapangan dengan suhu pengolahan citra sekitar 8 – 9 ˚C. Perlu adanya penelitian lebih lanjut untuk memperoleh algoritma suhu permukaan laut citra satelit LANDSAT 8 pada perairan Delta Mahakam.
PEMETAAN SUHU PERMUKAAN LAUT (SPL) MENGGUNAKAN CITRA SATELIT TERRA MODIS DI PERAIRAN DELTA MAHAKAM (Studi Kasus : Tahun 2013, 2016 Dan 2018) radik khairil
Elipsoida : Jurnal Geodesi dan Geomatika Vol 2, No 01 (2019): Volume 02 Issue 01 Year 2019
Publisher : Department of Geodesy Engineering, Faculty of Engineering, Diponegoro University,Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (938.749 KB) | DOI: 10.14710/elipsoida.2019.3471

Abstract

Penelitian ini dilatarbelakangi oleh atmosfer, cuaca dan musim serta perubahan posisi matahari yang dapat mempengaruhi perubahan suhu permukaan laut. Manfaat dari pemetaan distribusi suhu permukaan laut yaitu diantaranya untuk mengetahui tingkat kesuburan dari suatu perairan/laut. Oleh karena itu, tujuan dari penelitian ini adalah untuk memetakan dan membandingkan perbedaan distribusi  parameter suhu permukaan laut  pada tahun 2013, 2016 dan 2018 di Perairan Delta Mahakam menggunakan citra satelit Terra MODIS.  Penelitian ini menggunakan citra satelit Terra MODIS tanggal 13 April 2018, 10 Maret 2016 dan 25 Juli 2018 dengan metode algoritma Brown And Minnet.Hasil penelitian menunjukkan bahwa Suhu Permukaan Laut Tahun 2013, 2016 dan 2018 memiliki beda selisih yaitu pada tahun 2013 ke 2016 memiliki perbedaan tertinggi di kelas suhu 26⁰ - 38⁰ C yaitu mencapai 8186 piksel, dan perbedaan  suhu terendah  adalah  kelas suhu 19⁰ C yaitu 19 piksel. Pada tahun 2016 ke 2018 memiliki perbedaan tertinggi di kelas suhu 24⁰ - 26⁰ C yaitu mencapai 12469 piksel dan kelas suhu terendah terdapat pada kelas suhu 19⁰ C.  Penyebaran suhu pada tahun 2013 didominasi dengan klasifikasi warna merah dengan kisaran suhu 26⁰ - 38⁰ C.  Kemudian di tahun 2016 didominasi dengan klasifikasi warna orange dengan kisaran suhu 24⁰ - 26⁰ C.  Dan pada tahun 2018 didominasi dengan klasifikasi warna merah dengan kisaran suhu 26⁰ - 31⁰ C. Dari hasil ini dapat disimpulkan bahwa suhu permukaan laut menurut hasil pengolahan citra satelit TERRA MODIS mengalami perubahan suhu dominan dari tahun ke tahun dan semakin naik suhu permukaan lautnya
Pemetaan Daerah Rawan Banjir Daerah Aliran Sungai (DAS) Suli Kabupaten Luwu Radik Khairil Insanu; Feri Fadlin; F.V. Astrolabe Sian Prasetya
Poltanesa Vol 23 No 1 (2022): Juni 2022
Publisher : P2M Politeknik Pertanian Negeri Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (771.389 KB) | DOI: 10.51967/tanesa.v23i1.1001

Abstract

Bencana banjir merupakan salah satu masalah klasik yang sangat sering melanda Indonesia, khususnya di kawasan Daerah Aliran Sungai (DAS). Salah satu aspek yang menjadi bagian dari kajian kebencanaan banjir adalah unsur kerawanan/ ancaman/ bahaya (hazard). Komponen kerawanan/ bahaya dapat didefinisikan sebagai sebuah ancaman yang memiliki potensi menyebabkan kerugian pada manusia baik kerugian materil maupun jiwa. Penelitian ini mengkaji aspek kerawanan bencana banjir pada DAS Suli Kabupaten Luwu. Ruang lingkup substansial dari penelitian ini mencakup penyusunan dan pembuatan peta topografi, perhitungan debit banjir rencana dan data historis kejadian banjir, serta penyusunan peta daerah rawan banjir pada DAS Suli Kabupaten Luwu. Penelitian ini bertujuan untuk menganalisis hidrologi dan hidrolika serta memetakan daerah rawan banjir DAS Suli Kabupaten Luwu. Metode yang digunakan penelitian ini adalah survei pengumpulan data ketinggian banjir historis dan simulasi numerik 2D Hec-Ras. Hasil analisis debit banjir rencana menunjukkan bahwa, banjir yang terjadi di DAS Suli Kabupaten Luwu termasuk dalam kejadian kala ulang 50 tahun, sedangkan kapasitas tampung maksimum sungai suli adalah pada debit kala ulang 5 tahun. Pemetaan daerah rawan banjir dilakukan dengan mengkombinasikan hasil simulasi numerik 2 dimensi hec ras dengan data primer hasil survei dan pengukuran elevasi banjir historis pada DAS Suli. Hasil analisis menunjukkan korelasi yang kuat antara data kedalaman banjir hasil simulasi dengan kedalaman banjir historis dengan nilai korelasi 96,03%. Hasil pemetaan daerah rawan banjir menunjukkan bahwa kelurahan Suli Kecamatan Suli sebagai daerah dengan luas wilayah terbesar terkena banjir. luas genangan untuk klasifikasi tingkat bahaya banjir rendah (<0.76m) adalah 172,96 Ha, Tingkat bahaya banjir sedang (0.76m – 1.5m) adalah 84,70 Ha, dan Tingkat bahaya banjir tinggi (>1.5m) adalah 87,09 Ha.
Identifikasi Penggunaan Lahan Perumahan Bukit Indah Permai Kota Samarinda dengan Menggunakan Orthophoto Artanti Tustika; Dawamul Arifin; Radik Khairil Insanu; Nia Kurniadin
Journal of Geomatics Engineering, Technology, and Sciences Vol. 1 No. 2 (2023): March 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v1i2.25

Abstract

Land use according to the Basic Agrarian Law is the structure and pattern of land use, whether planned or not, which includes land supply, land allotment, land use, and maintenance. Land use is regulated to meet activities. Sustainable social and livelihood activities result in the amount of land needed, type, and location. Land use arrangements determine social accessibility, economic opportunity, movement patterns, and survival. Bids to change land use patterns should take into account the problems that will arise as a result of land use reforms. Land use information will be able to be used as data/information in making decisions on the development planning of an area. Bukit Indah Permai housing is one of the housing areas in the Samarinda which offers several types of housing, like types 21, 27, 36, and type 45. Land use information from the Bukit Indah Permai housing area will be able to provide consideration for potential consumers to make Bukit Indah Permai housing the residence of their choice. From the results of ortho data processing, it can be seen that land use in Bukit Indah Indah housing includes housing, green open spaces, public facilities (roads), and social facilities. Each of these land uses has a different area, namely for the area of ​​land use as housing is 50.57%, land use as green open space covers an area of ​​32.3%, land use for social and public facilities (road) respectively - 3.65% and 13.48%.
Evaluasi Nilai Volume Produksi Overburden di PT Ansaf Inti Resources Site Berambai Bulan September 2022 Muhammad Havit Pratama; Dawamul Arifin; Radik Khairil Insanu; Nia Kurniadin
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 1 (2023): September 2023
Publisher : Politeknik Pertanian Negeri Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i1.30

Abstract

PT. Ansaf Inti Resources is located in Kec. Kutai Kartanegara, East Kalimantan. The coal mining process is preceded by excavation of overburden or activities carried out prior to coal getting to meet its production target, in determining the volume of overburden stripping in the Alam 4 pit survey activities are carried out and the determination of the rate of conveyance. In survey activities carried out by measuring the coordinates of X/easting, Y/northing and Z/elevation. The purpose of conducting research on, "Knowing the Value of Mine Production Volume based on Overburden Material Stripping survey data, truck count data Using Surpac Software" is to know the measurement of overburden progress survey in the mining area, know the calculation of overburden progress survey volume and find out the results of comparison of progress survey volume with calculations the number of trucks carrying overburden. The methodology used in this study consisted of the research preparation stage, the data collection stage, namely secondary data obtained indirectly from the survey team in the field. The results of measurements and calculations regarding the progress survey conducted in September 2022 obtained the overburden volume value in the first week of 76,289.77 BCM/m3, in the second week the overburden volume value was obtained 55,826.43 BCM/m3, in the third week the results were obtained the result of the overburden volume value is 44,179.01 BCM/m3, in the fourth week the result of the overburden volume value is 60,290.74 BCM/m3.
Pemetaan Deforestasi dan Perubahan Tutupan Lahan di Wilayah Pertambangan Nikel Kecamatan Pomalaa Memanfaatkan Teknologi Penginderaan Jauh Andi Baso Sofyan A. P.; Feri Fadlin; Dawamul Arifin; Radik Khairil Insanu; Ahmad Aris Mundir Sutaji
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 2 (2024): March 2024
Publisher : Politeknik Pertanian Negeri Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i2.35

Abstract

Pomalaa District, Kolaka Regency, Southeast Sulawesi Province, is one of the regions in Indonesia which has quite large mining potential, especially for nickel commodities. The stages of nickel mining activities consist of land clearing activities which can cause deforestation or reduction of forest area. The aim of this research is to map deforestation and land cover changes that occur in the nickel mining area of Pomalaa District. It is expected that the results of this research can be used as consideration in formulating policies for efforts to rehabilitate land damaged by mining activities in Pomalaa District, Kolaka Regency, Southeast Sulawesi Province. The method used in this research is multi-time remote sensing image data analysis. The data used are Landsat 8 images in 2014, 2018 and 2023 to analyze changes in forest areas and changes in land cover at the research location during that time period. The results of the research show that there has been a decrease in the area of forest and vegetated areas, that is in 2014 the area reached 17,207.9 hectares to 16,178.4 hectares in 2018 and 16,110.1 hectares in 2023. Meanwhile, the mine excavation area has increased from 1,792.3 hectares in 2014 to 2,005.4 hectares in 2023. Likewise, the area of built-up land and open land has increased from 3,509.3 hectares in 2014 to 4,370.7 hectares in 2023.
Identifikasi Penggunaan Lahan Perumahan Bukit Indah Permai Kota Samarinda dengan Menggunakan Orthophoto Tustika, Artanti; Arifin, Dawamul; Insanu, Radik Khairil; Kurniadin, Nia
Journal of Geomatics Engineering, Technology, and Science Vol. 1 No. 2 (2023): March 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v1i2.25

Abstract

Land use according to the Basic Agrarian Law is the structure and pattern of land use, whether planned or not, which includes land supply, land allotment, land use, and maintenance. Land use is regulated to meet activities. Sustainable social and livelihood activities result in the amount of land needed, type, and location. Land use arrangements determine social accessibility, economic opportunity, movement patterns, and survival. Bids to change land use patterns should take into account the problems that will arise as a result of land use reforms. Land use information will be able to be used as data/information in making decisions on the development planning of an area. Bukit Indah Permai housing is one of the housing areas in the Samarinda which offers several types of housing, like types 21, 27, 36, and type 45. Land use information from the Bukit Indah Permai housing area will be able to provide consideration for potential consumers to make Bukit Indah Permai housing the residence of their choice. From the results of ortho data processing, it can be seen that land use in Bukit Indah Indah housing includes housing, green open spaces, public facilities (roads), and social facilities. Each of these land uses has a different area, namely for the area of ​​land use as housing is 50.57%, land use as green open space covers an area of ​​32.3%, land use for social and public facilities (road) respectively - 3.65% and 13.48%.
Evaluasi Nilai Volume Produksi Overburden di PT Ansaf Inti Resources Site Berambai Bulan September 2022 Pratama, Muhammad Havit; Arifin, Dawamul; Insanu, Radik Khairil; Kurniadin, Nia
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 1 (2023): September 2023
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i1.30

Abstract

Ansaf Inti Resources is located in Kec. Kutai Kartanegara, East Kalimantan. The coal mining process is preceded by excavation of overburden or activities carried out prior to coal getting to meet its production target, in determining the volume of overburden stripping in the Alam 4 pit survey activities are carried out and the determination of the rate of conveyance. In survey activities carried out by measuring the coordinates of X/easting, Y/northing and Z/elevation. The purpose of conducting research on, "Knowing the Value of Mine Production Volume based on Overburden Material Stripping survey data, truck count data Using Surpac Software" is to know the measurement of overburden progress survey in the mining area, know the calculation of overburden progress survey volume and find out the results of comparison of progress survey volume with calculations the number of trucks carrying overburden. The methodology used in this study consisted of the research preparation stage, the data collection stage, namely secondary data obtained indirectly from the survey team in the field. The results of measurements and calculations regarding the progress survey conducted in September 2022 obtained the overburden volume value in the first week of 76,289.77 BCM/m3, in the second week the overburden volume value was obtained 55,826.43 BCM/m3, in the third week the results were obtained the result of the overburden volume value is 44,179.01 BCM/m3, in the fourth week the result of the overburden volume value is 60,290.74 BCM/m3.
Pemetaan Deforestasi dan Perubahan Tutupan Lahan di Wilayah Pertambangan Nikel Kecamatan Pomalaa Memanfaatkan Teknologi Penginderaan Jauh Sofyan A. P., Andi Baso; Fadlin, Feri; Arifin, Dawamul; Insanu, Radik Khairil; Sutaji, Ahmad Aris Mundir
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 2 (2024): March 2024
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i2.35

Abstract

Pomalaa District, Kolaka Regency, Southeast Sulawesi Province, is one of the regions in Indonesia which has quite large mining potential, especially for nickel commodities. The stages of nickel mining activities consist of land clearing activities which can cause deforestation or reduction of forest area. The aim of this research is to map deforestation and land cover changes that occur in the nickel mining area of Pomalaa District. It is expected that the results of this research can be used as consideration in formulating policies for efforts to rehabilitate land damaged by mining activities in Pomalaa District, Kolaka Regency, Southeast Sulawesi Province. The method used in this research is multi-time remote sensing image data analysis. The data used are Landsat 8 images in 2014, 2018 and 2023 to analyze changes in forest areas and changes in land cover at the research location during that time period. The results of the research show that there has been a decrease in the area of forest and vegetated areas, that is in 2014 the area reached 17,207.9 hectares to 16,178.4 hectares in 2018 and 16,110.1 hectares in 2023. Meanwhile, the mine excavation area has increased from 1,792.3 hectares in 2014 to 2,005.4 hectares in 2023. Likewise, the area of built-up land and open land has increased from 3,509.3 hectares in 2014 to 4,370.7 hectares in 2023.
Perbandingan Hasil Pengolahan Data GPS Geodetik Menggunakan Aplikasi Compass Solution dan Aplikasi Trimble Business Center Arifin, Dawamul; Herliana, Nadira Ayu; Fadlin, Feri; Insanu, Radik Khairil
Journal of Geomatics Engineering, Technology, and Science Vol. 2 No. 2 (2024): March 2024
Publisher : P3KM Politani Samarinda

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51967/gets.v2i2.37

Abstract

The background of this research is as an effort to determine the level of accuracy in the Compass Solution and Trimble Business Center software. So that you can find software with a better level of accuracy. The purpose of this study is to find out the results of processing static observation data using Compass Solution and Trimble Business Center software to obtain a report on the processing results in the form of point coordinate values. The methods used in measurement activities are absolute and differential methods which are then processed using Compas Solution Software and Trimble Business Center software. The results obtained in this study are the availability of the difference in coordinates X, Y and Z when processing using Compass Solution and Trimble Business Center software. The results of differential method data processing using the Trimbel Business Center application (strategy 3) are closest to the fixed BM coordinate values ​​that have been determined, namely with an average difference in the X value of 7.75 mm, Y value of 17.5 mm, and the average difference The Z value is 266.25 mm. Meanwhile, the results of absolute method data processing using the Compass Solution application (strategy 2) are closest to the fixed BM coordinate values, namely with an average difference in the X value of 1,129 mm, Y value of 229.25 mm, and an average difference in Z value is 1,131 mm.