Garuda - Garba Rujukan Digital

Proposal for Improving the Work Posture of Stitching Station Operators at CV. Indonesia Jaya Using the Rapid Upper Limb Assessment Rodhian, Syahrul; Agusti, Febrina; Filemon Waluyono, Garnet
Proceeding of the International Conference Health, Science And Technology (ICOHETECH) 2024: Proceeding of the 5th International Conference Health, Science And Technology (ICOHETECH)
Publisher : LPPM Universitas Duta Bangsa Surakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47701/icohetech.v5i1.4200

This study evaluates the effectiveness of the Rapid Upper Limb Assessment (RULA) method in improving work posture in industrial settings. Poor posture can lead to musculoskeletal disorders and reduced productivity. Using a quantitative approach, RULA was applied across several production departments, with data collected through direct field observation. The analysis shows that RULA significantly improved work posture, reduced discomfort, and lowered the risk of musculoskeletal injuries. The study supports RULA as an effective tool for posture improvement and recommends integrating regular ergonomic evaluations into work design.

Redesigning the Production Facility Layout Using the Systematic Layout Planning (SLP) Method: A Case Study at CV. Vyo Factory Rahmadani, M. Ibnu; Nur Diansari, Brillian; Filemon Waluyono, Garnet
SAINTEKBU Vol. 17 No. 01 (2025): Vol. 17 (01) January 2025
Publisher : KH. A. Wahab Hasbullah University

Show Abstract | Download Original | Original Source | Check in Google Scholar

This research was conducted to design a facility layout using the SLP method, accompanied by a comparison of the efficient time between the initial layout and the proposal, as well as the results of direct observations of the production flow and activities in the CV production area. The Vyo factory has problems with irregular production flows, back-and-forth material movement (backtracking). This problem can have an impact on the enormous distances that material is moved irregularly due to relationships between departments that are far apart. Additionally, there is the issue of placing facilities that are not connected, as some facilities must be located near the production process. To overcome layout management problems, a method that can be employed is Systematic Layout Planning, which can be implemented using SketchUp software by redesigning the facility layout using this method. Based on the proposed alternative layout design using the SLP method, it can be seen that the best layout for shirt production on line 1 is starting with the storage warehouse, leading to the cutting for pattern cutting, after completion, it continues with a sewing process combining the front and back chest patterns, and sleeve sewing. The results of the design carried out using the SLP method, with SketchUp software, obtained a proposed layout to eliminate backtracking. The results of the analysis of effectiveness and efficiency during the production process can optimize the production process to be more orderly and utilize space more efficiently, allowing for a more streamlined workflow from incoming raw materials to finished products. Implementing this proposed layout can resolve layout issues in the production area, thereby eliminating backtracking.

ANALYSIS EFFICIENCY OF IRRIGATED RICE FARMING IN WONOSARI DISTRICT Sepfrian, Bimoseno; Wahyu Utami, Indah; Filemon Waluyono, Garnet; Arsa Nugralistyo, Nafisan
Proceeding of the International Conference Health, Science And Technology (ICOHETECH) 2023: Proceeding of the 4th International Conference Health, Science And Technology (ICOHETECH)
Publisher : LPPM Universitas Duta Bangsa Surakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47701/icohetech.v4i1.3398

Farmers, as parties who have an important role in meeting people's food needs in agriculture, should have high selling prices and their welfare should be taken into account by the government. Agricultural development is a means of effort to improve the standard of living of farmers, increase income, expand employment and business opportunities, and expand markets both domestically and abroad. This can be achieved through advanced, efficient and resilient agriculture so that it can increase yields, improve quality and support regional development. This study aims to analyze income, efficiency and costs of irrigated lowland rice farming in Wonosari district, Klaten. The method used in this research is to determine the sample by means of purposive sampling. Data analysis uses farming analysis such as analysis of income, efficiency and costs. The results of this research are the average income earned on irrigated rice fields in Wonosari District Rp. 10,542,703.72/Ha. Farming costs obtained by irrigation rice farmers amounted to IDR 11,009,059.63/Ha. Revenue for irrigated lowland rice farming is IDR 21,551,763.35/Ha and the efficiency of irrigated lowland rice farming in Wonosari District is IDR 2.0.

Proposal for Improving the Work Posture of Stitching Station Operators at CV. Indonesia Jaya Using the Rapid Upper Limb Assessment Rodhian, Syahrul; Agusti, Febrina; Filemon Waluyono, Garnet
Proceeding of the International Conference Health, Science And Technology (ICOHETECH) 2024: Proceeding of the 5th International Conference Health, Science And Technology (ICOHETECH)
Publisher : LPPM Universitas Duta Bangsa Surakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47701/icohetech.v5i1.4200

This study evaluates the effectiveness of the Rapid Upper Limb Assessment (RULA) method in improving work posture in industrial settings. Poor posture can lead to musculoskeletal disorders and reduced productivity. Using a quantitative approach, RULA was applied across several production departments, with data collected through direct field observation. The analysis shows that RULA significantly improved work posture, reduced discomfort, and lowered the risk of musculoskeletal injuries. The study supports RULA as an effective tool for posture improvement and recommends integrating regular ergonomic evaluations into work design.

Redesigning the Production Facility Layout Using the Systematic Layout Planning (SLP) Method: A Case Study at CV. Vyo Factory Rahmadani, M. Ibnu; Nur Diansari, Brillian; Filemon Waluyono, Garnet
SAINTEKBU Vol. 17 No. 01 (2025): Vol. 17 (01) January 2025
Publisher : KH. A. Wahab Hasbullah University

Show Abstract | Download Original | Original Source | Check in Google Scholar

This research was conducted to design a facility layout using the SLP method, accompanied by a comparison of the efficient time between the initial layout and the proposal, as well as the results of direct observations of the production flow and activities in the CV production area. The Vyo factory has problems with irregular production flows, back-and-forth material movement (backtracking). This problem can have an impact on the enormous distances that material is moved irregularly due to relationships between departments that are far apart. Additionally, there is the issue of placing facilities that are not connected, as some facilities must be located near the production process. To overcome layout management problems, a method that can be employed is Systematic Layout Planning, which can be implemented using SketchUp software by redesigning the facility layout using this method. Based on the proposed alternative layout design using the SLP method, it can be seen that the best layout for shirt production on line 1 is starting with the storage warehouse, leading to the cutting for pattern cutting, after completion, it continues with a sewing process combining the front and back chest patterns, and sleeve sewing. The results of the design carried out using the SLP method, with SketchUp software, obtained a proposed layout to eliminate backtracking. The results of the analysis of effectiveness and efficiency during the production process can optimize the production process to be more orderly and utilize space more efficiently, allowing for a more streamlined workflow from incoming raw materials to finished products. Implementing this proposed layout can resolve layout issues in the production area, thereby eliminating backtracking.

Perancangan Alat Bantu Angkut Komponen Motor Modular Menggunakan Metode Quality Function Deployment (QFD) di Bengkel Cat Yoesbrush Muhammad Hidayah Tullah; Brillian Nur Diansari; Garnet Filemon Waluyono
Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 9 No. 3 (2026): July
Publisher : LPPM Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jutin.v9i3.61218

Bengkel Cat Yoesbrush operates two work locations about 600 meters apart and relies on a single Honda Astrea motorcycle to move components between branches, forcing staff to make 10-20 round trips daily because the standard vehicle's limited cargo space cannot accommodate heterogeneous loads that combine bulky-but-light parts with heavy components. This study designs a modular motorcycle component transport attachment using the Quality Function Deployment (QFD) method to translate user needs into technical specifications. Primary data were collected through questionnaires and interviews with two direct users and validated by an expert, then processed through a House of Quality (HoQ) matrix and visualized in SolidWorks. The results identify 11 customer requirement attributes (WHATs) and 13 technical responses (HOWs), with the highest priorities being rack dimensions (13%), mounting points (10%), and maximum load capacity (10%). The final design is a 60x70 cm modular rack built from 2 mm hollow steel, capable of carrying at least 30 kg, weighing under 10 kg in total, and fitted with a knock-down bracket system requiring no permanent modification to the motorcycle.

Identifikasi dan Analisis Risiko K3 Menggunakan Metode Hiradc dan Jsa di Home Industry Marno Art Samuel Ariel Hermawan; Brillian Nur Diansari; Garnet Filemon Waluyono
Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 9 No. 3 (2026): July
Publisher : LPPM Universitas Pahlawan Tuanku Tambusai

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31004/jutin.v9i3.61269

Home Industry Marno Art Collection is a business in the field of fabric production and dyeing that still uses manual work processes so that it has various potential occupational hazards. This study aims to identify potential hazards, assess the level of risk, and determine risk control using the Hazard Identification, Risk Assessment and Determining Control (HIRADC) and Job Safety Analysis (JSA) methods. The study used a qualitative descriptive approach through observation, interviews, documentation, and literature studies. The results showed that the highest risk was found in chemical exposure in the dye mixing process with a risk value of 16 which is included in the high category. Recommended risk controls include the use of personal protective equipment, improved ventilation, preparation of SOPs, and OHS training. The application of the HIRADC and JSA methods is effective in identifying hazards and determining risk control priorities.

Title

Found 17 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 17 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 17 Documents
Search