Claim Missing Document
Check
Articles

Found 51 Documents
Search
Journal : KADIKMA

ANALISIS KECEPATAN ALIRAN UDARA PADA GEDUNG BERTINGKAT KARENA PENGARUH PENGHALANG DI DEPANNYA Susanto, Joni; Dafik, D; Fatahillah, Arif
KadikmA Vol 6, No 2 (2015)
Publisher : KadikmA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (423.045 KB)

Abstract

Abstract. The air flow velocity is one of many factor which should be considered in building a skyscraper. This is because the air flow velocity can affect the comfort of house room. The method which is used to solve the air flow analysis is a finite volume withusing Quadratic Upwind Interpolation Convective Kinematics (QUICK) discretization technique. Finite volume method is used to obtain a mathematical model of air flow velocity and QUICK is used to discretize it such that it will yield a linier equation system in a matrix of size (mn)×(mn). To simulate the air flow analysis is used Matlab and Fluent softwares. The result show that if the barrier is higher the air flow velocity will be decreased and if the distance of barrier is longerthe air flow velocity will be increased. It can be conclude that this analysis can be applied to have a comfort house room. Key Words : air flow velocity,mathematic model, finite volume method,QUICK
PENERAPAN PEMBELAJARAN PROBLEM BASED INSTRUCTION (PBI) UNTUK MENINGKATKAN HASIL BELAJAR SISWA PADA POKOK BAHASAN TRIGONOMETRI DI KELAS X IPA 2 SEMESTER GENAP SMA NEGERI ARJASA TAHUN AJARAN 2013 -2014 B, Girlda Elynikie; Trapsilasiwi, Dinawati; Fatahillah, Arif
KadikmA Vol 6, No 2 (2015)
Publisher : KadikmA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (357.001 KB)

Abstract

Abstract. The problem based learning model or known as Problem Based Instruction (PBI) always presents problems in real life context. This learning model has brought the students to get involved in the process of finding and investigating. The steps in this learning model were directing the students to the problems, organizing the students to learn, helping independent and group investigation, developing and presenting artifact and exhibits, and also analyzing and evaluating of problem solving. This research applied two cycles covering planning, action, observing, and reflection. The Approach used in this research was qualitative approach. This research was a Class room Action Research Design (CAR). This research design was adopted from Hopkin’s, which each cycle has four phases or steps, those are planning, action, observing, and reflection, and then continued to the following cycle. Data collection method used in this research was test, observation, documentation, and interview. Acording to the observation, the students individual activity from the first up to the fourth meeting is 69,87%, 72,22%, 74,3% and 79,72%, and the students group activity from the first up to the fourth meeting is 75,27%, 76,13%, 80,83% and 91,1%. The percentage of the students who achieved the target was 82.5%, with 7 students were failed in the first cycle. In the second cycle, the percentage of the students who achieved the target was 95% with 2 students were failed. Key Words : Problem Based Instruction, Achievements
ANALISIS BUKU SISWA MATEMATIKA KURIKULUM 2013 UNTUK KELAS X BERDASARKAN RUMUSAN KURIKULUM 2013 Widyaharti, Maulina Syamsu; Trapsilasiwi, Dinawati; Fatahillah, Arif
KadikmA Vol 6, No 2 (2015)
Publisher : KadikmA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (383.807 KB)

Abstract

Abstract: In 2013, there were changes of curriculum in Indonesia. The name of new curriculum is 2013 curriculum. The difference of 2013 curriculum is the student book has been provided by The Goverment. Analysis on student book is needed for reviewing the suitability of student book by 2013 curriculum formulation. Analysis was done based on four criteria, that are competence, material, scientific approach and authentic assessment. Research instrument was form of questions that consist of : 11 competence questions, 11 material questions, 10 scientific approach questions, and 8 authentic assessment questions. Analysis result showed the persentage of competence suitability is 80,49% (good categories), for the persentage of material suitability is 81,06% (good categories), for the persentage of scientific approach suitability is 95,83% (very well categories), and the persentage of authentic assessment suitability is 88,80% (very well categories). Keywords: analysis, 2013 curriculum, student book.
ANALISIS KECEPATAN ALIRAN HIDROGEN PEROKSIDA (H2O2) PADA STERILISASI SALURAN AKAR GIGI MENGGUNAKAN METODE NUMERIK VOLUME HINGGA Hardiyanti, Siska Aprilia; Dafik, D; Fatahillah, Arif
Kadikma Vol 6 No 2 (2015): Agustus 2015
Publisher : Department of Mathematics Education , University of Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.19184/kdma.v6i2.1981

Abstract

Abstract. The sterilization of tooth root canal is one of phases at treatment of endodontic or pulp treatment or commonly called tooth root canal treatment. This treatment is necessary because over the years many doctors assumed cavities tooth that cause pain and can not cure, should be pulled out. Endodontic treatment is the appropriate treatment for patient. Endodontic treatment is one of the measures to maintain the tooth in the mouth as long as possible when the pulp tissue has been infected. This research construct a model of tooth root canal and solve sterilization problem by using the finite volume method. Model of simulation process is solved using MATLAB and FLUENT software. The model which is constructed based on direction syringe spray and impeller pressure. Based on the result of the research, if angle of syringe spray is getting greater then the velocity is getting lower, if the angle of syringe spray is getting smaller then the velocity is getting higher. If the value of impeller pressure is more than 6 Pa then velocity is higher, if the value of impeller pressure is less than 6 Pa then velocity is negative value, whereas if the value of impeller pressure is 6 Pa then velocity is moderate value and the change of domain length of tooth root canal is not to great, so the spreading of velocity is evenly. Key Words : Treatment of endodontically, Sterilization of Root Canals, Angle of Syringe Spray, Impeller Pressure, Finite Volume Method.
ANALISIS KEMAMPUAN PEMECAHAN MASALAH SISWA MENGGUNAKAN METODE JUMPING TASK PADA MATERI SISTEM PERSAMAAN LINIER DUA VARIABEL Putri, Chika Ramadhanty Twine Ayu; Hobri, H; Fatahillah, Arif
Kadikma Vol 9 No 3 (2018): Desember 2018
Publisher : Department of Mathematics Education , University of Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.19184/kdma.v9i3.11002

Abstract

This study describes the level of student problem solving based on NCTM SMPN 7 Jember students in solving SPLDV problems using the jumping task method. Data collection methodswhich used are tests and interview. The subjects studied further in this study were 3 students, one student was included in the level of “very good” problem solving, one student falls under the category of “good” at problem solving, and the other one belongs to the category of “moderate”. The results showed that 7 people were included in the very good category, 18 people were in the good category, 13 people were in the category of “moderate” and no one was in the category of “poor”. Keywords: problem solving, NCTM, jumping task
PENGEMBANGAN MEDIA PEMBELAJARAN MATEMATIKA INTERAKTIF SCHOOLOGY BERBANTUAN SOFTWARE GEOGEBRA MATERI TRANSFORMASI GEOMETRI KELAS XI Permatasari, Putri Ayu; Dafik, Dafik; Fatahillah, Arif
Kadikma Vol 7 No 1 (2016): April 2016
Publisher : Department of Mathematics Education , University of Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.19184/kdma.v7i1.5469

Abstract

Abstract. This research is conducted to describe the process of learning media development and to know the product learning media development of mathematic interactive Schoology software Geogebra based on transformation geometry at class XI SMKN 2 Jember. This research is research of development based on development model 4D that describe by Thiagarajan wich consist of 4 stages, namely define, design, develop and disseminate. Subject of this research is students of class XI at SMKN 2 Jember at Multi Media with 1 thep students number are 32 students. Data collection in this research used validation sheets model from 3 validators, teachers interview, user quetionair and students score test. The result was analysed in descriptive form the result of research, the result of the media’s validity level is 93% or in other words the prevalence level is in the “High” category, the practical level is seen from students activity quetionnaire researching 84,2% or can be categorized as “Good” and the effectiveness level of 81,25% is in the “Practical” criterion, so it can be said that developed learning media worthy to be tested. Keywords : Geogebra, Learning Media, 4D Thiagaran Models, Schoology.
ANALISIS KECEPATAN ALIRAN UDARA PADA GEDUNG BERTINGKAT KARENA PENGARUH PENGHALANG DI DEPANNYA Susanto, Joni; Dafik, D; Fatahillah, Arif
Kadikma Vol 6 No 2 (2015): Agustus 2015
Publisher : Department of Mathematics Education , University of Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.19184/kdma.v6i2.1986

Abstract

Abstract. The air flow velocity is one of many factor which should be considered in building a skyscraper. This is because the air flow velocity can affect the comfort of house room. The method which is used to solve the air flow analysis is a finite volume withusing Quadratic Upwind Interpolation Convective Kinematics (QUICK) discretization technique. Finite volume method is used to obtain a mathematical model of air flow velocity and QUICK is used to discretize it such that it will yield a linier equation system in a matrix of size (mn)×(mn). To simulate the air flow analysis is used Matlab and Fluent softwares. The result show that if the barrier is higher the air flow velocity will be decreased and if the distance of barrier is longerthe air flow velocity will be increased. It can be conclude that this analysis can be applied to have a comfort house room. Key Words : air flow velocity,mathematic model, finite volume method,QUICK
PENYEBARAN ALIRAN PANAS PADA OVEN SURYA (3 DIMENSI) Fatahillah, Arif
Kadikma Vol 4 No 1 (2013): April 2013
Publisher : Department of Mathematics Education , University of Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.19184/kdma.v4i1.1049

Abstract

Abstract. Era industrialisasi yang berkembang sangat cepat membutuhkan sumber daya energi yang cukup besar, dimana sebagian besar sumber daya energi tersebut semakin berkurang dari waktu ke waktu. Untuk itu dibutuhkan suatu sumber daya energi alternatif yang diharapkan bisa menggantikan sumber daya utama yang semakin berkurang tersebut. Salah satu energi alternatif untuk pemanasan ataupun pembakaran adalah menggunakan oven berbantuan surya yang berguna tetapi memiilki dampak yang ramah terhadap lingkungan. Dari penelitian yang sudah dilakukan dengan menggunakan metode volume hingga dan diselesaikan dengan teknik diskritisasi QUICK maka didapatkan bahwa energi surya dapat dimanfaatkan dengan maksimal jika oven berbentuk kubus dan diberi sekat-sekat, hal ini juga berpengaruh terhadap temperatur awal yang masuk, semakin besar energi surya yang terserap maka proses pemanasan akan berlangsung dengan baik. Sedangkan penyebaran temperatur cukup merata dengan temperatur tertinggi pada oven surya berbentuk kubus adalah terletak pada tengah kubus. Key Words :Modelling, Oven Surya, Finite Volume Method
PENGEMBANGAN MEDIA PEMBELAJARAN MENGGUNAKAN ADOBE FLASH CS3 PROFESSIONAL PADA MATERI TRIGONOMETRI SISWA SMK KELAS XI Fauziyah, Faridah; Setiawani, Susi; Fatahillah, Arif
Kadikma Vol 7 No 1 (2016): April 2016
Publisher : Department of Mathematics Education , University of Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.19184/kdma.v7i1.5474

Abstract

Abstract. The result of this development research is a product development of learning media, quality tested through valid criteria, practical and effective. The production of learning media in this development research used software adobe flash cs3 professional and also could be presented by accessing a website named mediabelajar.hol.es on sine rules material, cosine rules, and the area of the triangle if two sides and one angle was known. This research was done with 10 stages adapted from Alessi and Trollip development model, that was (1) determining the needs and objectives of media development, (2) collecting references, (3) deepening material, (4) preliminary design, (5) designing and manufacturing flow charts, (6) designing and making media structure, (7) making Story Board media, (8) making a media by using Adobe flash CS3 Profesional, (9) make the supporting material that is website, as a place to put media that has been developed in order to be widely used, (10) evaluating and revising media. This activity of developing a learning media produced a learning media that fulfilled criteria such as valid, practical and effective. Valid was indicated from the validation stage. Validator gave final score of material validation was 87,5% and final score of media validation was 91,07%, because of that this media could be said valid media. Besides that, this media also had a practical value was 2.97 which can be included as quite practical category, and it had effectiveness value was 72.4% which was included as effective category. Keywords : learning media, adobe flash cs3 professional, trigonometry
PEWARNAAN TOTAL ANTIAJAIB ℋ-DEKOMPOSISI SUPER PADA GRAF PRISMA DAN SUBDIVISI GRAF PRISMA SERTA KAITANNYA DENGAN KETERAMPILAN BERPIKIRTINGKAT TINGGI Viantasari, Erwinda; Dafik, D; Fatahillah, Arif
Kadikma Vol 9 No 3 (2018): Desember 2018
Publisher : Department of Mathematics Education , University of Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.19184/kdma.v9i3.10917

Abstract

All graphs in this paper are unorientated, simple, connected, and planar graphs. Super ℋ-decomposition antimagic total labeling on a graph is a bijective function that fulfills for every two neighboring isomorphic subgraphs (just share vertex elements and minimumly share one vertex) and , , where for each , , is a subgraph of graph that contains vertexs and edges , , , . Next, it is called coloring if many of different weights is at its minimum. In this paper, we will find the existence of chromatic numbers of super ℋ-decomposition antimagic total coloring on Prism Graph and subdivision graph of Prism graph. In this research will also related with high order thinking skills with six aspects as indicators. Those aspects are Remembering, Understanding, Applying, Analysing, Evaluating, and Creating. The results of this research are four theorems about super ℋ-decomposition antimagic total coloring on Prism Graph and subdivision of Prism graph and related with high order thinking skills. Keywords: Super -Decomposition Antimagic Total Coloring, Prism Graph and Subdivision of Prism Graph, High Order Thinking Skills
Co-Authors Adelia Putri Liowardani Ahmad Syaiful Rizal, Ahmad Syaiful Aiyunin, Qurrota Amirullah, Iqbal Antonius Cahya Prihandoko Arif Wicaksono Arif Wicaksono Arika Indah Kristiana Arnasyitha Yulianti Soelistya Ayu Lestari,, Lisa Azza Liarista Anggraini Brahmanto, Juanda D. Dafik Devi Permatasari Didin Trisnani, Didin Dinawati Trapsilasiwi Diona Amelia, Diona Dody Dwi Aprianto Elsa Yuli Kurniawati Ervin Eka Riastutik, Ervin Eka Excelsa Suli Wildhatul Jannah Faruq, Fathulloh Fatoni, Muhamad Faizal Fauziyah, Faridah Flavia Aurelia Hidajat, Flavia Aurelia Girlda Elynikie B, Girlda Elynikie Hobri Irsalina Dwi Puspitasari Isni Qothrunnada Joni Susanto, Joni Kamalia Fikri Kusumaningtyas, Nastiti Latifah, Izza Wardatul Lestari, Harin Tripuji Lioni Anka Monalisa Lioni Anka Monalisa, Lioni Anka Liowardani, Adelia Putri Lusia Dewi Minarti Lusia Dewi Minarti Madinda, Diah Putri Maharani, Dewi Masyhudi, Muhammad Ali Maulina Syamsu Widyaharti, Maulina Syamsu Maya Margaretha, Puspita Millatuz Zahroh, Millatuz Moch. Avel Romanza P, Moch. Avel Romanza Mochammad Ulin Nuha Mochammad Ulin Nuha Mohammad Fadli Rahman Nafisa Afwa Sania Nisa, Choirotun Niswatul Imsiyah Nisyak, Robiatun Novian Nur Fatihah Nur Alfiyantiningsih Nurcholif Diah Sri Lestari Permatasari, Putri Ayu Pradista, Vyke Triawilly Prisma Brilliana Priyanti, Nanda Rahma Purwati, Ratna Puspitasari, Irsalina Dwi Putra, Andhi Septian Hadi Putri, Chika Ramadhanty Twine Ayu Q Qoriatul R. Azmil Musthafa, R. Azmil Rafiantika Megahnia Prihandini Randi Pratama Murtikusuma Randi Pratama Murtikusuma Ridho Alfarisi Ridho Alfarisi, Ridho Robiatul Adawiyah S Slamin S Suharto S Sunardi S Susanto Saddam Hussen Saddam Hussen Safira Izza Ghafrina Safira Izza Ghafrina Safitri, Fihrin Luqiyya Septiyan Roby Pratama, Septiyan Roby Setiawan, Renal Heldi Setiawan, Susi Setiawan, Toto’ Bara Setyowati, Henny sholihin, akhmad Siska Aprilia Hardiyanti Siska Binastuti Slamet Hariyadi Soleh Chudin Sufirman Sufirman Suharto Suharto Susanto Susanto Susi Setiawani Susi Setiawani Swasono Rahardjo Theriq Azis Al Husein Titik Sugiarti Titin Kartini Toto Bara Setiawan Trapsilasiswi, Dinawati Umi Azizah Anwar Vahad Agil Liyandri Viantasari, Erwinda Vutikatul Nur Rohmah Wati, Yuli Fajar WIHARDJO, EDY Wiharjo, Edy Yafi, M. Ali Yuli Kurniawati, Elsa Zainul Arifin