cover
Article Per Year (5 Year)
All
Home Page
OAI Link
Editorial Team
Contact
Reviewer
Google Scholar
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kota bandung,
Jawa barat
INDONESIA
Jurnal Teknologi Mineral dan Batubara
Published by PUSLITBANG Teknologi Mineral dan Batubara
ISSN : -     EISSN : -     DOI : -
Core Subject : Science, Engineering,
Chemical Engineering, Chemistry & Bioengineering Energy
Jurnal Teknologi Mineral dan Batubara terbit pada bulan Januari, Mei dan September, memuat karya-karya ilmiah yang berkaitan dengan litbang mineral dan batubara mulai dari eksplorasi, eksploitasi, pengolahan, ekstraksi, pemanfaatan, lingkungan, kebijakan dan keekonomian termasuk ulasan ilmiah terkait. ISSN: 1979-6560 (print) ISSN: 2527-8789 (online) Accreditation Number (LIPI): 688/AU3/P2MI-LIPI/07/2015
Arjuna Subject : -
Articles 274 Documents
 24   25   26   27   28 
FLOTASI KASITERIT DARI BIJIH TIMAH PRIMER TIPE SKARN ASAL PULAU BELITUNG Kamoda, Rustam; Sanwani, Edy
Jurnal Teknologi Mineral dan Batubara Vol 19 No 3 (2023): Jurnal Teknologi Mineral dan Batubara Edisi September 2023
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol19.No3.2023.1472

Abstract

Indonesia as one of the world's tin producers, not only has tin reserve from secondary deposit, but also has tin reserve from skarn-type primary deposit located on Belitung Island. The presence and characteristics of cassiterite in skarn-type of primary tin ore can be confirmed through sample characterization and have the potential to be separated from impurity minerals by flotation method. There are several factors that can affect the separation of valuable mineral from impurities through the flotation method, namely minerals association, the use of collector type scheme, pH condition of flotation and the use of depressant. The result of sample characterization showed that the primary tin ore of the skarn type from Belitung Island contained Sn in a low concentration of 0.1615% in the form of cassiterite. The flotation experiments carried out in two schemes. The first scheme was flotation on samples using SHA, SO and SHA + SO as collectors in the different pH values (pH 6, 7, 8, and 9) and flotation with the absence and presence of depressant at pH 8 for each type of collector. Recovery, grade, percent mass pull, enrichment ratio, separation efficiency, and selectivity index were the parameters used to assess flotation performance. Generally, the experimental results showed that cassiterite flotation in different pH values tend to show a better performance at pH 8. The flotation results of the three type of collectors showed that the recovery of Sn from SHA collector < SO < SHA+SO. In term of grade in the concentrate, the Sn grade of SO < SHA+SO < SHA collector. Flotation experiments from the three type of collectors in the absence and presence of depressant showed that flotation performance was better in the absence of depressant.
PEMASTIAN VALIDITAS PENGUJIAN KADAR SENG SECARA KOMPLEKSOMETRI TERHADAP MODIFIKASI TEKNIK PREPARASI DALAM KONSENTRAT SENG SULFIDA Ekawandi, Fanny Rahman; Hardian, Arie; Herawati; Mapiliandari, Inda
Jurnal Teknologi Mineral dan Batubara Vol 19 No 3 (2023): Jurnal Teknologi Mineral dan Batubara Edisi September 2023
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol19.No3.2023.1479

Abstract

Sphalerite is one of the sulfide ore minerals that serves as the raw material for zinc sulfide concentrate (ZnS). Sphalerite in nature needs to be processed through a concentration process to become a high-value ZnS concentrate. The determination of zinc (Zn) content in the ZnS concentrate is carried out using complexometric methods, referring to the modified ISO 13658:2000 method in the preparation stage. In this research, the validity of the test results was conducted using several parameters, including precision testing (repeatability and reproducibility), accuracy (recovery and test result comparison with CRM value), and measurement of relative uncertainty in Zn content determination in ZnS concentrate using the modified ISO 13658:2000 method, it is conducted by two analysts. Certified reference material (CRM) O354 with a Zn content range of (49,30±2,46)% was used as a sample in this research. Zinc content in CRM O354 by Analyst X obtained 49.30% with RSD=0.37% and range of Recovery=(99.5-100.6)%, while Analyst Y obtained 49.03% with RSD=0.64% and range of Recovery=(98.1-99.9)%. Mean of results of the determination of Analyst X and Analyst Y is 49.13% with an uncertainty expanded by 1.90% so, Zn content is obtained at (49,13±1,90)% and the relative uncertainty is obtained at 3.87%. The minimum criteria for precision testing in terms of repeatability are RSD<2/3 CV Horwitz, and for reproducibility (F-test), Ftest<Ftable, for accuracy testing in terms of Recovery=(98-102)%, inter-analyst comparison, and test result comparison with CRM value (t-test), ttest<ttable as well as the minimum criteria for measurement of relative uncertainty<5%. Therefore, the test results of the modified ISO 13658:2000 method for Zn determination in ZnS concentrate have fulfilled all the validity parameters of the test results.
KARAKTERISTIK ABU LAYANG (FLY ASH) DARI PLTU TANJUNG SELOR DAN POTENSINYA SEBAGAI PREKURSOR MATERIAL ALUMINOSILIKAT Hayati, Nur; ‘Adany, Fildzah; Nugraeni, Crhistine Dyta; Syarif, Iif Ahmad; Kurniawati, Riskaviana
Jurnal Teknologi Mineral dan Batubara Vol 19 No 3 (2023): Jurnal Teknologi Mineral dan Batubara Edisi September 2023
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol19.No3.2023.1499

Abstract

Around 500 million tonnes of coal combustion by-products are produced annually, with Fly Ash accounting for about 70% of the by-product. Therefore, using Fly Ash is crucial because if it is not processed and utilized correctly, it can harm the environment and human health. The use of Fly Ash is strongly influenced by its characteristics, which are different for each source because it depends on the type of coal, combustion, and cooling conditions. Therefore, characterization was carried out in this study using XRF and XRD on Fly Ash from Tanjung Selor PLTU. Based on ASTM C618, PLTU Fly Ash Tanjung Selor is class F Fly Ash because the amount of SiO2+Al2O3+Fe2O3 is 71,4% (>70%) and the amount of CaO is 13,83% (<15%). The XRD results also show that Fe2O3 and SiO2 dominate the Fly Ash with the appearance of the peak of Fe2O3 (hematite) at 2θ = 33,44; 35,57; 43,27° (PDF 01-073-0603) and SiO2 (quartz) at 2θ = 20,81; 26,63; 50,14; 57,26; 68,34° (PDF 01-085-0335). The characteristics of this Fly Ash indicate that it has the potential as a precursor for the synthesis of zeolite X and P because it has a SiO2/Al2O3 ratio of 1,63. In addition, due to the dominant Si and Al content, Fly Ash has the potential as a geopolymer precursor; the dominant Fe content (27%) can also increase the geopolymer's development strength.
VALIDITAS HASIL PENGUJIAN KADAR TIMBAL SECARA KOMPLEKSOMETRI TERHADAP MODIFIKASI TEKNIK PREPARASI DALAM PRODUK KONSENTRAT TIMBAL SULFIDA Aprillianto, Yesaya; Hardian, Arie; Herawati; Tirta, Ardina Purnama
Jurnal Teknologi Mineral dan Batubara Vol 19 No 3 (2023): Jurnal Teknologi Mineral dan Batubara Edisi September 2023
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol19.No3.2023.1507

Abstract

Lead sulfide (PbS) concentrate is derived from the sulfide mineral galena. In nature, galena must first undergo a concentration process to become PbS concentrate. The determination of lead (Pb) content in the PbS concentrate is carried out using complexometric methods, referring to the modified ISO 13545:2000 standard during the preparation stage. In this research, the validity of the test results was assessed using several parameters, including precision test (repeatability and reproducibility), accuracy (%recovery) and estimation of measurement uncertainty. Certified reference material (CRM) Pb353, with a Pb content range of 58.20-64.33% was used as a sample in this study. The results showed an average Pb content of 61.11% for analyst A and 61.00% for analyst B in CRM Pb353. The research successfully met the precision testing requirements for repeatability (RSD 0.46% for analyst A and 0.39% for analyst B < 2/3 coefficient variance (CV) Horwitz 1.44%) and reproducibility (F-test 1.34 < F-table 4,28 and P-value 0.37 > significance level 0.05). Accuracy was also demonstrated with %recovery (analyst A 9.06–100.53% and analyst B 99.23–99.98%), as well as the estimation of measurement uncertainty (μrelative 2.27% < 5%). Therefore, the determination of Pb content using complexometric methods with modified preparation techniques in the PbS concentrate ensures the validity of the results.
STUDI PERBANDINGAN PROSES PELINDIAN UNTUK EKSTRAKSI SKANDIUM DARI TERAK RESIDU BAUKSIT Sariman; Rochani, Siti; Saleh, Nuryadi; Rodliyah, Isyatun; Dianawati, Erika Arum; Wijayanti, Retno
Jurnal Teknologi Mineral dan Batubara Vol 19 No 3 (2023): Jurnal Teknologi Mineral dan Batubara Edisi September 2023
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol19.No3.2023.1509

Abstract

Scandium is classified as a rare earth element. Its existences are geochemically in small amounts as associate minerals. Consequently, scandium production is minimally from processing residues of major minerals. Indonesia has large bauxite deposits, and it is processed into alumina, producing bauxite residue as a by-product. The bauxite residue contains rare earth metals, including scandium. In this study, various ways of extracting scandium from bauxite residue slag were carried out. The bauxite residue beneficiation process was done through a smelting reduction process followed by magnetic separation. Scandium extractions were carried out from the bauxite residue slag through a leaching process with concentrated sulfuric, sulfation, alkali fusion, and a 2-stage acid leaching. The best percentage of scandium extracted was obtained at 88.40%, using the 2-stage acid leaching at the acid concentration of 500 g/kg, the temperature of 90oC, and the leaching time at 3 hours for each leaching stage. In addition, the best neodymium extracted achieved  76,97%, using the alkali fusion, fused in NaOH at 700oC for 3 hours.
PEMANFAATAN BATU APUNG SEBAGAI ADSORBEN DALAM APLIKASI KOLOM ADSORPSI UNTUK PENYISIHAN LOGAM KROMIUM DARI AIR TANAH Indah, Shinta; Helard, Denny; Herdiani, Febbi
Jurnal Teknologi Mineral dan Batubara Vol 20 No 1 (2024): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2024
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol20.No1.2024.1510

Abstract

The utilization of pumice as an adsorbent has been tested in adsorption column applications in removing chromium (Cr) from groundwater. The pumice was taken from the banks of the Pasak River, Pariaman, West Sumatra. The column used is made of glass with 130 cm in height and 2,6 cm in diameter. The experiment was carried out by varying the bed height (65, 75, and 85 cm) and the influent flow rate (2, 3, and 4 gpm/ft2), while the influent concentration used was according to the groundwater sample conditions. The concentration of Cr was analyzed using inductively coupled plasma emission (ICPE). The performance of the adsorption column can be evaluated from the breakthrough curve, which is a plot between the Ct/C0 ratio and the sampling time. The experimental results showed that the optimum condition with the highest removal efficiency of 65.15% and an adsorption capacity of 0.0031 mg/g were obtained at a bed height of 85 cm and an influent flow rate of 2 gpm/ft2. Based on the experimental results, it was concluded that Cr removal efficiency increased as the influent flow rate decreased and as the bed height of adsorbent increased. The adsorption column with Sungai Pasak Pariaman pumice as an adsorbent has potential to be applied in removing Cr metal from groundwater.
PENINGKATAN PERSEN EKSTRAKSI PROSES PELINDIAN EMAS DAN PERAK MENGGUNAKAN VARIASI TEKNIK PENINGKATAN OKSIGEN TERLARUT SPARGER LANCE, PEROXIDE INJECTION DAN HIGH SHEAR REACTOR Ramadhan, Dikri Fajar; Hutabarat, Imelda Eva Roturena; Raja, Denny Lumban; Sulaeman
Jurnal Teknologi Mineral dan Batubara Vol 20 No 1 (2024): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2024
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol20.No1.2024.1512

Abstract

Cyanidation leaching has become the most intriguing technique for extracting gold and silver. In the gold and silver cyanidation process, PT Indo Muro Kencana (IMK) implements three (3) dissolved oxygen (DO) enhancement techniques. The concentration of DO typically becomes the limiting factor in the gold cyanidation process. The use of a pressurized system can also increase the DO concentration in water. Oxygen injection techniques with a sparger lance (standard/STD), peroxide injection (PRX), and high shear reactor (Aachen assisted leach/AAL) are employed to optimize the cyanidation process due to the increasingly complex characteristics of the processed ore since 2021. The use of a high shear reactor is the latest technique implemented since April 2022, following the previous implementation of peroxide injection and sparger lance by PT IMK. The objective of this study is to determine the extraction percentage and its stability in producing extraction percentages with different ore compositions. The oxygen used for each technique is the same, approximately 548 kg/hour flow rate, 90%-93% purity, and 4-6 KPa pressure. A series of leach tests are conducted to observe the extraction percentage of gold and silver. Based on the conducted tests, the reactor high shear technique yields the highest extraction percentages for gold and silver, namely 97.06% and 82.82% respectively. Leaching with the high shear reactor technique resulted in a higher percent extraction stability than the leaching process using the other two techniques.
OPTIMASI PERSEN BINDER, BEBAN KOMPAKSI, DAN SUHU SINTERING DALAM PEMBUATAN BATU BATA TINGGI ALUMINA MENGGUNAKAN APLIKASI RSM (RESPONSE SURFACE METHODOLOGY) Dianawati, Erika Arum; Sirait, Phichiato; Wibawa, Aditya; Husaini; Aryanti, Putu Teta Prihartini
Jurnal Teknologi Mineral dan Batubara Vol 20 No 1 (2024): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2024
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol20.No1.2024.1522

Abstract

PT Indonesia Chemical Alumina (ICA) is a company that produces 300,000 tons of chemical grade alumina (CGA) per year. Of this amount, there is an average of 15,000 tons that do not meet market specifications every year. Alumina that does not meet this specification is only piled up by PT. ICA and takes up space, so it is economically detrimental to the company because they have to provide space to accommodate it. In fact, this alumina has a very high Al2O3 content and is in the form of an alpha phase or α-Al2O3 which is the most stable phase at the highest temperatures, so it can be processed into useful materials and has high added value such as high alumina bricks through compaction and sintering. Process conditions such as percent binder, load during compaction and sintering temperature greatly affect the quality of the high alumina bricks produced. The purpose of this study is to optimize the process conditions for making high-alumina bricks by identifying the relationship between input variables and the measured responses and developing a prediction model for experimental variations that will be used in optimizing the process conditions for the manufacture of high alumina bricks. The Design Expert 7.0® program with Box-Behnken Design Response Surface Methodology (RSM) is used to research and select process conditions from a combination of factor levels that produce an optimal response. Based on RSM Box-Behnken Design it is known that the main effects of binder percentage, compaction load and sintering temperature are factors that greatly influence the response value of high alumina bricks. The optimal response value for high alumina bricks is a compressive strength of 8.2229 MPa, with a process condition of 3% binder percent, a compacting load of 10 tons and a sintering temperature of 1600ºC.
PEMETAAN SEBARAN MINERAL HEMATIT (Fe2O3) PADA ENDAPAN BAUKSIT DI KECAMATAN SANDAI, KALIMANTAN BARAT Putra, Yoga Abdul Malik; Muhardi; Perdana, Radhitya
Jurnal Teknologi Mineral dan Batubara Vol 20 No 1 (2024): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2024
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol20.No1.2024.1551

Abstract

Hematite (Fe2O3) is one of the minerals in bauxite deposits with a content of 20-45%. Estimation of hematite (Fe2O3) distribution over a large area with limited sample availability can be conducted using the interpolation method. This study aims to map and estimate the distribution of hematite (Fe2O3), ore thickness, and overburden thickness at Bukit Zahra, Sandai District, Ketapang Regency, West Kalimantan Province. The interpolation method in this study uses the inverse distance weighted (IDW) method, while the power test uses the calculation of the smallest root mean squared error (RMSE). The estimation results show the highest hematite (Fe2O3) content in the bauxite deposit of 20-25% is located at an elevation of 22-62 m, while the lowest hematite (Fe2O3) content of 0-6% is located at an elevation of 22-30 m. The mapping results show a maximum ore thickness of 7-9 m at an elevation of 46-62 m, while the minimum ore thickness of 0-1 m is at an elevation of 22-54 m. The maximum thickness of overburden is 6-8 m at an elevation of 38-46 m, while the minimum thickness of overburden is 0-1 m at an elevation of 22-62 m. The mapping results also show that the distribution of hematite (Fe2O3), ore, and overburden in the research site is on a gentle to steep slope.
POTENSI PERTUMBUHAN DAN DAYA SAING SEKTOR PERTAMBANGAN DI KABUPATEN MANOKWARI Setiawan, Arif; Rosyid, Fadhila Achmadi
Jurnal Teknologi Mineral dan Batubara Vol 20 No 2 (2024): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2024
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/jtmb.Vol20.No2.2024.1501

Abstract

The mining sector is a sector that contributes to economic growth in areas, one of which is in the Manokwari Regency. Within 12 years (2010-2022) the GRDP of the mining sector is likely to increase. The GRDP of the mining sector contributes 3% of the total GRDP of the Manokwari regency. Based on this, does the mining sector have the potential and the carrying capacity or competitiveness in the increasing GRDP in the Manokwari Regency? Therefore, this study aims to assess the potential and carrying capacity of the mining sector in increasing economic growth in the Manokwari regency. The method used is overlay analysis, which results from a combination of the assessment methods of Static Location Questient, Dynamic Location Questient, Shift Share Analysis, Typology Classen analysis, and Growth Ratio Models. The data used is GRDP data for Manokwari Regency and West Papua Province from 2010 to 2022. The results obtained show that the mining sector in Manokwari Regency is not the main sector or has not become the main focus in Manokwari Regency. However, this sector is a prospective sector or has the potential to be developed in the future so that it becomes the mainstay sector or the main sector.

Page 26 of 28 | Total Record : 274

 24   25   26   27   28 

Filter by Year

2008 2025


Reset
Filter By Issues
All Issue Vol 21 No 1 (2025): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2025 Vol 20 No 3 (2024): Jurnal Teknologi Mineral dan Batubara Edisi September 2024 Vol 20 No 2 (2024): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2024 Vol 20 No 1 (2024): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2024 Vol 19 No 3 (2023): Jurnal Teknologi Mineral dan Batubara Edisi September 2023 Vol 19 No 1 (2023): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2023 Vol 18, No 3 (2022): Jurnal Teknologi Mineral dan Batubara Edisi September 2022 Vol 18, No 2 (2022): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2022 Vol 18, No 1 (2022): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2022 Vol 17, No 3 (2021): Jurnal Teknologi Mineral dan Batubara Edisi September 2021 Vol 17, No 2 (2021): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2021 Vol 17, No 1 (2021): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2021 Vol 16, No 3 (2020): Jurnal Teknologi Mineral dan Batubara Edisi September 2020 Vol 16, No 2 (2020): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2020 Vol 16, No 1 (2020): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2020 Vol 15, No 3 (2019): Jurnal Teknologi Mineral dan Batubara Edisi September 2019 Vol 15, No 2 (2019): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2019 Vol 15, No 1 (2019): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2019 Vol 14, No 3 (2018): Jurnal Teknologi Mineral dan Batubara Edisi September 2018 Vol 14, No 2 (2018): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2018 Vol 14, No 1 (2018): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2018 Vol 13, No 3 (2017): Jurnal Teknologi Mineral dan Batubara Edisi September 2017 Vol 13, No 2 (2017): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2017 Vol 13, No 1 (2017): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2017 Vol 12, No 3 (2016): Jurnal Teknologi Mineral dan Batubara Edisi September 2016 Vol 12, No 2 (2016): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2016 Vol 12, No 1 (2016): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2016 Vol 11, No 3 (2015): Jurnal Teknologi Mineral dan Batubara Edisi September 2015 Vol 11, No 2 (2015): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2015 Vol 11, No 1 (2015): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2015 Vol 10, No 3 (2014): Jurnal Teknologi Mineral dan Batubara Edisi September 2014 Vol 10, No 2 (2014): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2014 Vol 10, No 1 (2014): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2014 Vol 9, No 3 (2013): Jurnal Teknologi Mineral dan Batubara Edisi September 2013 Vol 9, No 2 (2013): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2013 Vol 9, No 1 (2013): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2013 Vol 8, No 3 (2012): Jurnal Teknologi Mineral dan Batubara Edisi September 2012 Vol 8, No 2 (2012): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2012 Vol 8, No 1 (2012): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2012 Vol 7, No 4 (2011): Jurnal Teknologi Mineral dan Batubara Edisi Oktober 2011 Vol 7, No 3 (2011): Jurnal Teknologi Mineral dan Batubara Edisi Juli 2011 Vol 7, No 2 (2011): Jurnal Teknologi Mineral dan Batubara Edisi April 2011 Vol 7, No 1 (2011): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2011 Vol 6, No 4 (2010): Jurnal Teknologi Mineral dan Batubara Edisi Oktober 2010 Vol 6, No 3 (2010): Jurnal Teknologi Mineral dan Batubara Edisi Juli 2010 Vol 6, No 2 (2010): Jurnal Teknologi Mineral dan Batubara Edisi April 2010 Vol 6, No 1 (2010): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2010 Vol 5, No 4 (2009): Jurnal Teknologi Mineral dan Batubara Edisi Oktober 2009 Vol 5, No 3 (2009): Jurnal Teknologi Mineral dan Batubara Edisi Juli 2009 Vol 5, No 2 (2009): Jurnal Teknologi Mineral dan Batubara Edisi Mei 2009 Vol 5, No 1 (2009): Jurnal Teknologi Mineral dan Batubara Edisi Januari 2009 Vol 5, No 14 (2009) Vol 5, No 13 (2009) Vol 4, No 12 (2008) More Issue