cover
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kota semarang,
Jawa tengah
INDONESIA
METANA
Published by Universitas Diponegoro
ISSN : -     EISSN : -     DOI : -
Core Subject : Science,
Arjuna Subject : -
Articles 220 Documents
REKAYASA BIOKONVERSI LIMBAH CAIR INDUSTRI PANGAN MENJADI PLASTIK BIODEGRADABLE DENGAN MENGGUNAKAN LUMPUR AKTIF Wikanta, Deddy Kurniawan; Yulianto, Mohamad Endy; Arifan, Fahmi
METANA Vol 5, No 2 (2007): Desember 2007
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (5269.839 KB) | DOI: 10.14710/metana.v5i2.1903

Abstract

Abstract Plastics waste has a negative effect on our environment. one effort to solve a  problem exerted in plastic waste is by making a degradable plastic material. Polihidroksialkanoat (PHA) is one of biodegradable plastic material which is include in the polyester group. PHA can be completely degraded and has  similar properties. with conventional plastic. The usage of liquid food industry waste is a good alternative for the production of PHA, since liquid waste of food industry comprise of organics substance such as C, H, O, N and  S. The production of Polihidroksialkanoat (PHA) from liquid waste of flour industry, wasconducted in a of sequencing batch reactor (SBR).The objectives  of this research are to study the effect of batch time in one cycle of sequencing batch reactor(SBR), to compare between short and ordinary cycle in SBR system to PHA accumulation and kind of PHA, to study optimum condition of producing PHA. The first experimen was done In time of less than 12 hours by using filling time  variable and ratio of duration of Aerob and anaerob process. The constand conditions were ambient temperature and neutral pH (at the begining). The results shows that at running with time ratio of aerob:anaerob was 6:3 hours and a  same duration of  feeding, the highest average PHA content was got at the run when filling step is in six hours anaerob with aerob breaking time. The feeding duration  also influence the PHA formation. the short feeding duration yielded the highest average PHA content. An average PHA 0.1838 g/gsel was yielded at two hours feeding duration   Key Words :biodegradable:plastic:waste    
Penentuan Proses Pretreatment untuk Pemanfaatan Limbah Kulit Singkong sebagai Bahan Baku Bioetanol melalui Hidrolisa Enzimatis menggunakan Aspergillus spp. Ariyanti, Dessy; Purbasari, Aprilina; Kusumayanti, Heny; Handayani, Noer Abyor
METANA Vol 15, No 1 (2019): Juni 2019
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (785.67 KB) | DOI: 10.14710/metana.v15i1.22965

Abstract

Ketergantungan terhadap bahan bakar fosil ini menjadi masalah besar yang sangat mendesak untuk segera diselesaikan. Salah satu langkah solusi yang bisa dilakukan adalah memanfatkan bioetanol lignoselulosa dari limbah kulit singkong sebagai alternatif pengganti. Permasalahan utama yang menghambat penggunaan kulit singkong sebagai bahan baku utama pembuatan bioetanol adalah belum adanya proses pretreatment dan hidrolisa yang terbukti efektif secara teknis maupun ekonomis untuk mengkonversi lignoselulosa yang terkandung dalam kulit singkong menjadi bentuk gula sederhana. Penelitian ini dilaksanakan untuk mengetahui efektifitas proses pretreatment dan hidrolisa untuk mengkonversi lignoselulosa yang terkandung dalam kulit singkong menjadi bentuk gula sederhana. Metode pretreatment asam (H2SO4) dan organosolv (Etanol + CH3COONa) terbukti dapat meningkatkan yield gula tereduksi hingga 50% dibandingkan dengan proses hidrolisa tanpa pretreatment. Yield hingga 78% dapat diperoleh pada proses pretreatment asam suhu 30oC, waktu 30 menit yang dilanjutkan dengan hidrolisa enzimatik dengan Aspergillus niger selama 48 jam. Peningkatan yield pada proses pretreatment organosolv (optimum 74% pada suhu 30oC, waktu 90 menit) masih dapat dilakukan dengan meningkatkan waktu operasi dan meningkatkan suhu operasi. Namun peningkatan suhu maupun penambahan waktu operasi berpengaruh terhadap analisa teknis dan ekonomis dari proses. Secara teknis, pretreatment organosolv lebih mudah dilakukan terutama pada proses dengan kondisi operasi atmosferik dibandingkan dengan pretreatment asam karena sifat bahan kimia yang digunakan dan penanganannya. Secara ekonomis, pretreatment asam lebih baik untuk diaplikasikan dibandingkan pretreatment organosolv, hal ini dikarenakan yield yang dihasilkan lebih tinggi pada kondisi proses atmosferik. Lignocellulose material derived from cassava peel can be utilized as raw material for bioethanol production. The utilization of this material can be part of solution in order to maintain Indonesia’s energy security which still majority covered by the fossil fuel. The main problem of lignocellulose conversion into bioethanol is their crystalline structures those make them really difficult to be converted into monomeric sugar prior fermentation to produce ethanol. The objective of this research is to find out the effectiveness of pre-treatment process prior enzymatic hydrolysis of lignocellulose contained on cassava peel. The result shows pre-treatment methods both acid (H2SO4) and organosolv (Etanol + CH3COONa) proved to be effective in order to increase the yield of total reducing sugar (TRS) until 50% after enzymatic hydrolysis compared to the sample without pre-treatment. Highest yield 78% can be achieved by applying acid pre-treatment under temperature 30oC and 30 minutes of process prior enzymatic hydrolysis by Aspergillus niger under temperature 35oC for 48 hours. Further optimization in organosolv pre-treatment can be conducted by increasing the temperature and prolong the process into certain extent. It should be noted that the above action could influence the feasibility of the organosolv pre-treatment technically and economically. From technical point of view, organosolv pre-treatment can be more feasible compared to acid pre-treatment (under atmospheric condition) as the reagents are easy to handle in terms of safety consideration. However, from economic side acid pre-treatment is more preferable as higher yield of the process and lower volume of chemical can be used in order to achieve the same amount of product. 
OPTIMASI PRODUKSI PROTEIN SEL TUNGGAL DARI BAGASE TERHIDROLISA DENGAN FERMENTASI OLEH SACCAROMYCES CEREVICEAE Isti Pudjihastuti; Margaretha T S; Wahyuningsih Wahyuningsih; Edy Supriyo
METANA Vol 8, No 02 (2012): Desember 2012
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (159.631 KB) | DOI: 10.14710/metana.v8i02.6810

Abstract

The Came pulp (bagase) were main contained cellulose, through process delignification and hidrolized can be used to growting sacaromyces cereviceae yeast as fermented media, so can produced biomass microbial as known as single cell protein (SCP).Design experiment was random block with treatment nutrient added as long as fermented process. The measured parameter were protein contained in microbial biomass with Kehjdahl method. Optimum result were formed to 8 days fermentation and nutrient added (NH4)2SO4:1 gr,MgSO47H2O : 0,5 gr, molase (tetes) 20% : 2 ml to media 50 gr. Key word: bagase, Saccaromyces Cereviceae,SCP
PRODUKSI BIOGAS DARI LIMBAH KOTORAN SAPI PERAH DENGAN REAKTOR BIOGAS SISTEM BATCH DI DESA LEREP KABUPATEN UNGARAN Didik Wisnu Widjajanto; Heny Kusumayanti; Sri Rejeki
METANA Edisi Khusus Februari 2011
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (4708.634 KB) | DOI: 10.14710/metana.v0i0.1643

Abstract

Abstract   Biogas is mixed gas of methane(CH4),  carbondioxide (CO2) and others which is produced as a result of moterial degradation of organic material such as animal and humon feces or plant byproduct by methanagen bacterial activity in biodigester. The present work is aimed to produce biogas fromfeces of milk cow. Biogas reactor used is built by IbM team of "IbM Peternak sapi Perah Penghasil Biogas di larep-Ungaran" (batch system). Result of present work revealed that 4 m3 biogas reactor with batch system is able to produce biogas starting doy 4. ln the following day, the biogas production increase and reach peak on day seven which is produce 42,85 liter of mix gas or 25,71 liter of methana gas   Keywords : biogas. batch system, cow feces http://ejournal.undip.ac.id/index.php/metana/editor/viewMetadata/1643
BIOKATALIS LIPASE RHIZOPUS ORYZAE PADA REAKSI TRANSESTERIFIKASI LIPID TERSTRUKTUR KAYA ASAM LEMAK OMEGA -3 Wahyuningsih Wahyuningsih; Edy Supriyo; R. TD. Wisnu Broto
METANA Vol 11, No 02 (2015): Desember 2015
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (616.134 KB) | DOI: 10.14710/metana.v11i02.14752

Abstract

Abstrak                Immobilisasi merupakan teknik recovery enzim yang menjadi perhatian dalam beberapa tahun belakangan, dilakukan dengan bantuan support sebagai media yang dapat mencegah terlarutnya enzim. Metode immobilisasi yang digunakan dalam penelitian ini adalah metode adsorpsi, dengan menggunakan lipase rhizopus oryzae, reaksi yang diamati adalah reaksi transesterifukasi Lipid Terstruktur kaya omega-3. Tujuan Penelitian ini adalah, mengkaji teknik  immobilisasi enzim lipase dengan bantuan support dengan melakukan pengamatan  teknik  adsorpsi fisik  dan mengembangkan penggunaan enzim  lipase Rhizopus oryzae immobile sebagai  biokatalisator untuk reaksi transesterifikasi minyak ikan tuna. Optimalisasi kondisi operasi proses terhadap produktifitas lipid terstruktur kaya asam lemak omega-3, dengan kajian kecepatan reaksi. Tujuan utama dilakukan immobilisasi enzim adalah untuk melihat apakah enzim tersebut dapat digunakan kembali dalam reaksi selanjutnya (reuse). Hasil penelitian menunjukkan kondisi optimum reaksi  pada suhu 50oC, pH lipase 8 perbandingan ratio substrat (Minyak ikan tuna : asam laurat )1:10 selama 6 jam. Profil gliserida dari hasil asidolisis enzimatis adalah  78,1 % trigliserida, 32,2 % Digliserida dan 11,9% Monogliserida. Inkoorporasi asam laurat mencapai 62,8 mol %. Pada waktu inkubasi 12 jam, trigliserida menurun seiring dengan meningkatnya waktu inkubasi, sedangkan digliserida meningkat seiring dengan meningkatnya waktu inkubasi. Pada suhu reaksi di atas 50oC, trigliserida menurun seiring dengan meningkatnya suhu reaksi. Metode interesterifikasi ini cukup efektif untuk mensintesis lipid terstruktur spesifik.Kata kunci: Lipid terstruktur, immobilisasi lipase , minyak ikan tuna                                                                                                                                                                             Abstract                 Immobilization of an enzyme recovery techniques are a concern in recent years, carried out with the help of support as a medium that can prevent the dissolution of enzim. Method immobilization used in this study is the adsorption method, using rhizopus oryzae lipase, a reaction observed was a reaction transesterifikasi. Structured Lipids rich in omega-3 the aim of this study is, reviewing techniques immobilization of lipase with the assistance of support by observing techniques physical adsorption and develop the use of lipase Rhizopus oryzae immobile as biokatalisator for the transesterification reaction tuna fish oil optimization of operating conditions of the process to the productivity of structured lipids rich in fatty acids omega-3, with an assessment of the speed of the main reaction. Purpose  do immobilisation of enzymes is to see whether the enzyme can be reused in a subsequent reaction (reuse) the results of the research showed the optimum reaction conditions at 50 ° C, pH 8 comparisons ratio lipase substrate (tuna fish oil : lauric acid) 1:10 for 6 hours. Profil gliseride result is 78.1% asidolisis enzymatic triglycerides, 32.2% and 11.9% diglycerides Monogliserida. Inkoorporasi lauric acid reached 62.8 mol%. %. At the 12 hour incubation period, triglyceride decreases with increasing time of incubation, whereas diglycerides increased with increasing incubation time. At reaction temperatures above 50° C, triglycerides decreased with increasing reaction temperature. Interesterification method is quite effective to synthesize specific structured lipids.Keywords: structured lipids, immobilization of lipases, tuna fish oil 
MANFAAT LIMBAH BATANG JAGUNG DALAM PEMBUATAN PULP Kusumayanti, Heny; U, Karismawan P; Nila W, Tri Murti
METANA Vol 5, No 2 (2007): Desember 2007
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (4721.435 KB) | DOI: 10.14710/metana.v5i2.1813

Abstract

Absract Existence of paper in human life is important, because paper has function to record science, commerce promotion, medium to extend opinion and idea, and etc. However substance of paper in this time is become thin. For that, we try making pulp from waste of corn’s stem with use soda process and the tool is digester. The colour of product pulp is brown, but after the washing the colour pulp is shine brown because of impurity in the pulp is solute after been washed. The pulp is analyzing more further, between bleaching process, analyses of number permanganate, analyses grade of a cellulose, and grade of ash. The colour of product pulp after bleaching is white brown, grade of α cellulose 48.32%, grade of ash 8.8%, number permanganate 8.184.   Key word : corn’s stem, soda process, bleaching
Produksi Sabun Cuci Piring Sebagai Upaya Peningkatkan Efektivitas Dan Peluang Wirausaha Rizka Amalia; Vita Paramita; Heny Kusumayanti; Wahyuningsih Wahyuningsih; Maranatha Sembiring; Dina Elvia Rani
METANA Vol 14, No 1 (2018): Juni 2018
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (903.694 KB) | DOI: 10.14710/metana.v14i1.18657

Abstract

Sabun cuci piring merupakan salah satu kebutuhan dalam rumah tangga yang berfungsi sebagai penghilang kotoran dan lemak pada peralatan makan dan masak. Konsumsi sabun cuci piring yang  terus menerus setiap harinya, menyebabkan kebutuhan pengadaan sabun dengan biaya yang tidak sedikit, terlebih pada ibu-ibu kelompok pembuat jajan pasar sederhana di RT 4 RW 7 Kelurahan Pedalangan Kecamatan Banyumanik. Tujuan dilaksanakannya pengabdian kepada masyarakat ini adalah untuk memberi pengetahuan dan pelatihan kepada ibu-ibu RT 4, RW 7, Kelurahan Pedalangan, Kecamatan Banyumanik tentang pembuatan sabun cuci piring cair guna mengurangi pengeluaran masyarakat terhadap pembelian sabun sekaligus untuk menciptakan peluang usaha baru. Dalam kegiatan pengabdian, akan dijelaskan bahan baku, prosedur kerja dan perhitungan biaya produksi pembuatan sabun cuci piring. Dari  kegiatan yang dilakukan,  mitra dapat menghasilkan luaran produk barang berupa sabun cuci piring cair sesuai dengan metode yang diberikan dalam pelatihan. Production of Dish Washer Soap as Efforts to Increase Effectiveness And Entrepreneurial Opportunity Dishwashing liquid is one of household stuff that used for removing grease and dirt from dishes. Using the dishwashing liquid continuously cause the need of its stuff at a high enough cost. The purpose of this activity is to provide knowledge and training to the making of dishwashing liquid soap in order to reduce cost as well as to create new business opportunity. In this activities, the raw materials and procedure of producing dishwashing liquid will explained, and the production costs of dishwashing manufacture will calculated. From the activities undertaken, can produce the dishwashing liquid soap in accordance with the methods given in the training.  
ASIDOLISIS ENZIMATIK MINYAK IKAN TUNA( THUNNUS THYNNUS) MENJADI PRODUK ASAM LEMAK KAYA OMEGA-3 DENGAN PEMANFAATAN LIPASE GETAH PEPAYA (carica papaya latex) Wahyuningsih, Wahyuningsih; Pudjihastuti, Isti; Kusumayanti, Heny
METANA Vol 8, No 01 (2012): Juli 2012
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (142.392 KB) | DOI: 10.14710/metana.v8i01.4909

Abstract

Incorporation of omega-3 polyunsaturated acids (n-3 PUFA) into Tuna (Thunnus thynnus) fish oil was investigated by using acidolysis enzimatis Process. The product of this modification is expected to be used as an ingredient nutrifition food products, especially in milk and baby food as well as pregnant and lactating The purpose of this study was to optimizing the used of lipased papaya latex (Carica papaya latex) in the product to incorporation fatty acids rich in omega-3.Bioreactor acidolysis enzematik development and Optimization of process the productivity of fatty acids rich in omega-3. Reaction Acidolysis was conducted between tuna (thunnus thynnus) fish oil by microbial lipase (5% of the weight of the substrate mixture) or vegetable lipased (Carica papaya latex) (6-10% by weight subtract mixture) as biocatalist.Acidolysis mixture the bioreactor at 40 o C for (2-6 hours) and the stirring speed of 200 rpm, pH (4.5 to 6.5). to eliminate free fatty acids from the product acidolysis performed neutralization with NaOH The results are expected to show that the lipase papaya latex (Carica papaya latex) can be used as biocatalyst incorporated omega-3 fatty acids in   tunaIthunnus thunnyl) fish oil . In this study sought conditions for optimum incorporation rate, ie the use of papaya latex lipase concentration of 8%, the ratio of concentrations of omega-3 fatty acid and palm oil (1:1), pH = 5.5, Optimal time of 4 hours and the temperature (40oC) . The results were analyzed incorporation of omega-3 (EPA and DHA) with GC.EPA generated: 3.57% and DHA = 3.91% Key word:Acidolysis,Tuna fish oil
Penerapan Alat Pencetak Kue “Unthuk Yuyu” Secara Kontinyu untuk Meningkatkan Kapasitas Produksi Handayani, Dwi; Ardiayasari, Anindya; Vendamawan, Rico
METANA Vol 12, No 2 (2016): Desember 2016
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1143.202 KB) | DOI: 10.14710/metana.v12i2.17658

Abstract

Industri kue kering merupakan industri makanan yang memanfaatkan tepung terigu sebagai bahan baku utama dalam proses produksinya. Produk kue kering biasanya disajikan dalam bentuk yang spesifik sebagai ciri jenis makanan yang bersangkutan, maupun untuk mendapatkan estetika yang menarik dengan bentuk yang kreatif dan berkembang. Banyak sekali makanan khas Indonesia dengan bahan baku yang sama dan proses pengolahan yang sama, namun dengan bentuk produk yang yang berbeda akan mendapatkan ketertarikan konsumen yang berbeda. Dalam skala industri untuk memproduksi makanan dalam bentuk tertentu biasanya berlomba untuk menghasilkan bentuk-bentuk yang menarik, dengan proses pembentukan menggunakan pencetakan. UMKM ” Dua Bintang” memproduksi berbagai kue kering dan makanan ringan, namun produk terbanyaknya adalah kue ”unthuk yuyu”. Selama ini dalam proses produksi masih menggunakan alat pencetak yang bekerja secara manual sehingga banyak memerlukan tenaga kerja dan kapasitas produksinya sangat terbatas. Pada saat permintaan meningkat cukup tinggi, sering tidak bisa terpenuhi karena keterbatasan tenaga kerja. Oleh karenanya untuk peningkatan kuantitas produksi perlu adanya sentuhan teknologi untuk dapat mencetak kue tersebut secara mekanik yang bekerja kontinyu. Adanya penerapan Alat Pencetak Kue yang bekerja secara kontinyu tersebut, kapasitas produksi kue unthuk yuyu di UMKM ”Dua Bintang” mengalami peningkatan kapasitas produksi dari 35 kg/hari menjadi 75 kg/hari dan  menghemat jumlah tenaga kerja dari 20 orang menjadi 8 orang. Dapat disimpulkan bahwa dengan penerapan Alat Pencetak Mekanik yang kontinyu, kapasitas produksi dapat meningkat lebih dari 100% dan biaya produksi akan menurun karena jumlah tenaga kerja yangdibutuhkan juga berkurang.
AKUMULATOR, PEMAKAIAN DAN PERAWATANNYA Setiono, Iman
METANA Vol 11, No 01 (2015): Juli 2015
Publisher : Universitas Diponegoro

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (242.733 KB) | DOI: 10.14710/metana.v11i01.12579

Abstract

Abstrak                     Akumulator merupakan sumber tegangan arus searah yang meliputi sumber tegangan sekunder, keberadaannya diperoleh karena sumber tegangan yang lain.Fungsi dari akumulator pada saat ini semakin banyak, terutama sebagai sumber tegangan untuk jenis peralatan yang fleksibel. Dengan semakin banyak jenis peralatan yang menggunakan akumulator, maka akan menjadi lebih banyak jenis akumulator yang ada  di pasar. Suatu hal yang paling penting dalam akumulator adalah masalah optimalisasi penggunaan dan pemeliharaan dimana  memerlukan perhatian. Sehingga akumulator dapat hidup tahan lama, maka pemeliharaan/perawatan  memegang peranan penting, terutama untuk perangkat bergerak, sebagai sarana transportasi yang menggunakan akumulator sebagai sumber energi. Dengan adanya  perawatan yang tepat, diharapkan bahwa daya tahan akumulator dapat bertahan hidup dalam  jangka waktu cukup lama. Kata kunci: akumulator, pemeliharaan, sumber tegangan. Abstract Accumulator is a direct current voltage source which includes a secondary voltage source, because its existence is obtained due to the voltage source to another. Accumulator on nowadays more and more functions, especially as a voltage source for the type of equipment that is flexible. With more and more types of equipment that use accumulators, then will be the more types of accumulators in the market. A most important thing in the accumulator is a matter of optimizing the use and maintenance that need attention. So that the accumulator can be durable lifetime, then a treatment holds an important role, especially for the move tool, as a means of transportation that use the accumulator as an energy source. With the proper care, it is expected that the durability of the accumulator can survive a period of time long enough. Keywords: accumulator, maintenance, voltage source.