Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

Jurnal Ilmu Dasar

JID
Website

Published by Universitas Jember

ISSN : 24425613 EISSN : - DOI : https://doi.org/10.19184/jid.v24i2.36657

Core Subject : Education, Engineering,

Control & Systems Engineering Mathematics

Jurnal ILMU DASAR (JID) is a national peer-reviewed and open access journal that publishes research papers encompasses all aspects of natural sciences including Mathematics, Physics, Chemistry and Biology. JID publishes 2 issues in 1 volume per year. First published, volume 1 issue 1, in January 2000 and avalaible in electronically since 2012 with ISSN 1411-5735 (Print) and avalaible in electronically since 2012 with ISSN 2442-5613 (online). Jurnal ILMU DASAR is accredited SINTA 3 by the Ministry of Education, Culture, Research, and Technology of the Republic of Indonesia (Kemendibukristek) No. 152/E/KPT/2023 (September 25, 2023), Ministry of Research, Technology and Higher Education of the Republic of Indonesia (RISTEKDIKTI), No. 200/M/KPT/2020 (December. 23, 2020). All accepted manuscripts will be published worldwide JID has been indexed in DOAJ, Dimension, OCLC WorldCat, PKP Index, Crossref, Google Scholar, Base, Garuda, and OneSearch. JID have been collaborated in KOBI-ID (Konsorsium Biologi Indonesia) and HKI (Himpunan Kimia Indonesia) since 2017.

Arjuna Subject : Matematika - Kontrol dan Optimasi

Articles 415 Documents

8 9 10 11 12

Chemicals Identification Related To The Chemical Weapons Convention During The 15th Interlabory Proficiency Test Sri Sumartini; Harry Budiman; Nuryatini Nuryatini; Puspa Dewi
Jurnal ILMU DASAR Vol 9 No 1 (2008)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (436.476 KB)

Identification of some chemical weapons in the water and organic sample has been carried out during 15th proficiency testing hold by OPCW (Organisation Prohibition of Chemical Weapon). Sample preparation method was adopted from Recommended Operational Procedure (ROP) from OPCW and Helsinki University, Finlandia. Prepared sample was identified by gas chromatography (FID and FPD), gas chromatography mass spectrometry (EI and CI mode) and Liquid chromatography mass spectrometry method.. From 7 spiking chemical weapons introduced to water and organic sample, 3 spiking chemicals could be identified (propylphosphonic acid, isoprophylphosphonic acid and 1,4 Bis 2-chloroethyl (thio) butane). One chemical was reported as Butyl S-2-diisopropylaminoethyl propylphosphonothiolate but obviously this is not a spiking chemical (category false positive identification).

Pore Structure and Morphology Characterizations of Mesoporous ZSM-5 Synthesized at Various Aging Time Djoko Hartanto; Tri Esti Purbaningtias; Hamzah Fansuri; Didik Prasetyoko
Jurnal ILMU DASAR Vol 12 No 1 (2011)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (473.394 KB)

Mesoporous ZSM-5 has been successfully synthesized at various aging time of 6, 12 and 24 h. Mesoporous ZSM-5 was synthesized using cetyltrimethylammonium bromide (CTABr) as a template. Synthesis was carried out hydrothermally with aging and crystallization temperature at 60oC and 150oC. XRD patterns of the resulted material showed diffraction lines at 2θ = 23o and at small angle (2θ < 5o) which is characteristic of the structure of ZSM-5 and the existing of the mesoporous material. It was found that crystallinity of the sample increased at longer aging time. The result of nitrogen gas sorption analysis showed that all samples have pore size about 3,8 nm. The porosity of ZSM-5 decreased with shorter of aging time. ZSM-5 synthesized at 6 h aging time has the highest porosity of 72.57%. Aging time also affected the particle size, the longer the aging time, the smaller the particle size. The particle size was ranging 1.25 – 1.0 μm.

Analysis of Blood Flow in Arterial Stenosis Using Casson and Power-Law Fluid Model Riri Jonuarti
Jurnal ILMU DASAR Vol 14 No 2 (2013)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

Simulation of blood flow behaviour in the arteries and in arterial stenosis has been made and will be discussed in this paper. This simulation uses pulsatile flow and blood flow in artery without stenosis is considered as a dynamic fluid, compressed and condensed. Whereas, in the case of arterial stenosis has been used Casson and Power-law fluid models. In the arteries without stenosis, blood flow velocity profiles show the same pattern for each Womersley number, but with different speed value. In the case of arterial stenosis, blood flow rate decreases with increasing stenosis position away from axis of blood vessels. Resistances to flow are increases with increasing the size (height and length) of stenosis, both for the Casson and Power-law fluid models. If resistance to flow increases, it is more difficult for the blood to pass through an artery, result the flow decreases and heart has to work harder to maintain adequate circulation.Keywords : Artery, blood flow, power-law fluid, Casson fluid, stenosis

Amperometric biosensor for glucose detection based-on immobilisation of glucose oxidase in acetic cellulose membrane using ferrocene as mediator Asnawati Asnawati; Dwi Indarti; Tri Mulyono; Gembong Kesuma B
Jurnal ILMU DASAR Vol 14 No 1 (2013)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

The study reported the development of glucose ampherometric biosensor based on immobilization of glucose oxidase on cellulose acetate membrane with ferrocene as a mediator. Biosensor was designed with model Fc, GOx, CP / GOx / CA where ferrocene and the enzyme glucose oxidase on carbon paste in immobilizatin on the electrode body in the form of glass tubes and in other parts of the enzyme glucose oxidase in immobilizatin on cellulose acetate membrane with adsorption techniques are placed in electrode tip by using the o-ring. The presence of enzymes immobilization was determined quantitatively by enzyme immobilization was Km value. The results showed the composition of acetone-water in the optimum coagulation bath is 0:100% and 0,0008 g of Optimum ferrocene. Biosensor for measuring glucose in the area amperometri 0,1 to 3 mM with regression coefficient of 0,996, the detection limit of 0,01 mM, sensitivity of 0,989 μA / mM, the reproducibility of 0,07 to 0,3% and lifetime of 1 day. Keywords : Biosensor; glucose oxidase ; acetic cellulose; Ferrocene: Ampherometric.

CHARACTERIZATION OF SULFONATED POLYSULFONE/BENTONITE HYBRID MEMBRANES Bambang Piluharto; Imam Syafi’i; R. Indahsari; Tanti Haryati
Jurnal ILMU DASAR Vol 13 No 1 (2012)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

Sulfonated polysulfone membrane is one of the alternative membranes as replacing Nafion membrane for the fuel cell application. This membrane was prepared by introducing sulfonic group in the polysulfone structure backbone, so that provides the ionic membrane. However, more ionic groups in the SPSF membrane lead to loss mechanical stability. This study aims to prepare the hybrid membrane from SPSF and bentonite. In here, various of bentonite concentrations were used as variable to study water uptake and ion-exchange capacity properties. As the results, increasing bentonite concentrations lead to increase water uptake and ion-exchange capacity. By the functional group analysis, proved that adding bentonite in SPSF did not change structure of SPSF, means that interaction between SPSF and bentonite were physical interactions.

Physical Characteristics of Edible Film Gel Made under Various pH and Ratio of Casein and Tapioca Triana Lindriati; Yhulia Praptiningsih; Dwi Fatma Wijayanti
Jurnal ILMU DASAR Vol 15 No 1 (2014)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

Gelation from casein and tapioca take place in the edible film making. An interaction of carbohydrate and protein in the formation of gel could be affect on the physical properties of edible film gel. An appropriate ratio of casein-tapioca and pH was expected to produce physical characteristics of edible film gel. The aims of this research were to know the influence of casein- tapioca ratio, pH and the interaction of casein-tapioca ratio and pH to produce edible film gel. The research was conducted by randomized completely block design with two factors. The first factor was casein-tapioca ratio (0:100; 20:80; 40:60; 60:40; 80:20; 100:0) and the second factor was pH (4; 7; 9). The parameter of observation were colour (lightness and chroma), moisture content, WHC, precipitation and viscosity of edible film gel. The data analysis uses minitab V.1.6 carried on Tukey test. The result shows that casein-tapioca ratio influenced on colour (lightness and chroma), moisture content, WHC, precipitation and viscosity of edible film gel. The treatment of pH influenced on colour (lightness and chroma), moisture content, WHC and precipitation of edible film gel. An interaction between the ratio of casein-tapioca and pH influenced on colour (lightness and chroma), moisture content, WHC and precipitation of edible film gel. Keywords: Edible film gel, interaction of carbohydrate-protein, physical characteristics

Structural Equation Modeling of the Factors Affecting the Nutritional Status of Children Under Five in Banyuwangi Region using Recursive (one-way) GSCA I Made Tirta; Nawal Ika Susanti; Yuliani Setia Dewi
Jurnal ILMU DASAR Vol 16 No 1 (2015)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

Structural Equation Modeling is one among popular multivariate analysis, especially applied in pschology and marketing. There are two main types of Structural Equation Modeling namely covariance-based or CB-SEM and variance-based or Partial Least Square (PLS)- SEM. Both types have advantages and disadvantage. To overcome its limitation, Generalized Structured Component Analysis (GSCA) was then proposed as an extension of PLS-SEM. In estimating the parameters, GSCA uses Alternating Least Squares (ALS) and in estimating the standard error of the parameter estimates it uses the bootstrap method. In this paper, GSCA is applied to study the causality model of Infant nutritional status, in relation with socio-economic status and infantcare status in Banyuwangi Region. The results show that both socio-economic and infantcare status have significant positive influence on infant nutritional status.Keywords: Alternating least square, generalized structural component analysis, nutritional status of infants, structural equation modelling

Influence of the Gamma Ray towards Porosity Evaluation of the Rocks Using Well Log Measurement Puguh Hiskiawan
Jurnal ILMU DASAR Vol 15 No 2 (2014)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

Well Log method is one of the geophysics methods used to examine rock structure under earth surface. This research is studied by using utilizing influence of the gamma ray to physical parameter on well log measurement. This research is explained to compare the measuring data with some physical parameters. The results shown that the rock density was about 2.00 – 2.50 g/cc, the rock porosity was round 2.00 – 2.50 g/cc, whereas the resistivity has 2 Ωm to 60 Ωm. All those vaiables were measured at same depth 3420 – 3470 ft. Furthermore, the self potential value was the highest negatively. The result from physical parameter provided meaning about anomaly positively of hydrocarbon existing.Keywords: Well Log, gamma ray, hydrocarbon

The Aplications Biological Control of the Pest Population ( Plutella xylostella Linn. And C. pavonana Zell.) and Their Natural Enemies in Cabbage Plants in the Village Kalibaru Kulon, District Banyuwangi Helmi Helmi; Didik Sulistyanto; Purwatiningsih Purwatiningsih
Jurnal ILMU DASAR Vol 16 No 2 (2015)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

The aim of the research was to determine the effectiveness of biological control agens to the population of pests and their natural enemies in cabbage crops in agricultural land Kalibaru kulon Kab. Banyuwangi. The research was conducted by Randomized Complete Block Design with with five replications. The treatments were Control as P0, Heterorhabditis sp. as P1, Bacillus thuringiensis as P2, Profenofos as P3, Beauveria bassiana as P4, Red bacteria as P5. Data were obtained from observations of pest population and their natural enemies, as well as the percentage decrease in the population of pests and their natural enemies. Data were analyzed using ANOVA and LSD were tested further by 5%. The results showed that Heterorhabditis sp. was the most effective agents to control populations of Plutella xylostela Linn. and Crocidolomia pavonana Zell., this is also indicated by a decrease in pest population of Plutella xylostela by 54.66% and amounted to 47.9% Crocidolomia pavonana. Aplication biological agens was not affect the population of natural enemies Coccinela repanda, and Verania sp. Keywords : Cabbage, Biological Control, Pests, Natural enemies

Modification of Sensor Sensitivity of Magneto-Impedancy on Multilayer [Ni80Fe20/Cu]N as result of Electro-Deposition B. Anggit Wicaksono; Ahmad Asrori Nahrun; Nuryani Nuryani; Budi Purnama
Jurnal ILMU DASAR Vol 17 No 1 (2016)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Jember

Multilayer sensor sensitivity [Ni80Fe20/Cu]N as results of electro-deposition on Cu wire has been modified by several variables; namely (i) the frequency of measurement, (ii) the number of iteration N on the system [Ni80Fe20/Cu]N, and (iii) the thickness of the spacer layer of Cu. If applied as a magnetic sensor, the measured sensor sensitivity can be calculated using the formula; ξ = 2 [(ΔZ/Z)max]/ΔH. The results of the sensitivity calculations show that the increase in the ratio of magneto-impedance directly proportional to the sensitivity of the sensor. To modify the frequency of the sample [Ni80Fe20(800nm)/Cu(300 nm)]3, the measurement sensitivity increases with increases in frequency. And the highest sensitivity is obtained 8.91%/ mT at a frequency of 100 kHz. Similar results were obtained in the variation of the number of iteration N multilayer [Ni80Fe20 (800 nm) / Cu (300 nm)]N. Senitifitas measurements at a frequency of 100 kHz and the highest number of iteration (N=5) obtained the highest sensitivity, which is 26.63%/mT. Furthermore, the sensitivity of the sensor showed a tendency to decrease with the increase in the thickness of the spacer Cu in multilayer [Ni80Fe20 (800 nm)/Cu (y nm)]3. Finally, the highest sensitivity was obtained 53.75% / mT for most thin thickness of the spacer Cu (y = 200 nm) which is the highest value in the whole of this experimentKeywords: Sensor Sensitivity, Ni80Fe20 , Frequency Measurement, Iteration Number, Spacer Cu

Page 10 of 42 | Total Record : 415

8 9 10 11 12

Filter by Year

2007 2025

Filter By Issues

All Issue Vol. 26 No. 2 (2025) Vol 26 No 1 (2025) Vol 25 No 2 (2024) Vol 25 No 1 (2024) Vol 24 No 2 (2023) Vol 24 No 1 (2023) Vol 23 No 2 (2022) Vol 23 No 1 (2022) Vol 22 No 2 (2021) Vol 22 No 1 (2021) Vol 21 No 2 (2020) Vol 21 No 1 (2020) Vol 20 No 2 (2019) Vol 20 No 1 (2019) Vol 19 No 2 (2018) Vol 19 No 1 (2018) Vol 18 No 2 (2017) Vol 18 No 1 (2017) Vol 17 No 2 (2016) Vol 17 No 1 (2016) Vol 16 No 2 (2015) Vol 16 No 1 (2015) Vol 15 No 2 (2014) Vol 15 No 1 (2014) Vol 14 No 2 (2013) Vol 14 No 1 (2013) Vol 13 No 1 (2012) Vol 12 No 2 (2011) Vol 12 No 1 (2011) Vol 11 No 2 (2010) Vol 11 No 1 (2010) Vol 10 No 2 (2009) Vol 10 No 1 (2009) Vol 9 No 2 (2008) Vol 9 No 1 (2008) Vol 8 No 2 (2007) Vol 8 No 1 (2007) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Solikhatun

Contact Email
solikhatun@ugm.ac.id

Phone
+62331334293

Journal Mail Official
jid@unej.ac.id

Editorial Address
Jl. Kalimantan 37 Kampus Tegalboto Jember 68121 Telp. 62 331 334293 Fax. 62 331 330225

Location
Kab. jember,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Solikhatun

Contact Email solikhatun@ugm.ac.id

Phone +62331334293

Journal Mail Official jid@unej.ac.id

Editorial Address Jl. Kalimantan 37 Kampus Tegalboto Jember 68121 Telp. 62 331 334293 Fax. 62 331 330225

Location Kab. jember, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Solikhatun

Contact Email
solikhatun@ugm.ac.id

Phone
+62331334293

Journal Mail Official
jid@unej.ac.id

Editorial Address
Jl. Kalimantan 37 Kampus Tegalboto Jember 68121 Telp. 62 331 334293 Fax. 62 331 330225

Location
Kab. jember,

Jawa timur

INDONESIA